Structural engineering of porphyrin-based small molecules as donors for efficient organic solar cells

Novel Beta-Functionalized Porphyrins Approaching 11% Efficiency for Organic Solar Cells

Porphyrins and their derivatives possess high molar extinction coefficients and strong electron-donating abilities and have been widely used in organic solar cells (OSCs). Though porphyrins can be easily functionalized at the four meso-positions and the eight β-positions, nearly all porphyrin photovoltaic materials are reported to be functionalized at the meso-positions, and the porphyrin photovoltaic materials functionalized at the β-positions are to be explored. Herein, the regioselective β-positions of a porphyrin are first brominated without using rare metal iridium catalysts, and then, after two more reactions, two antipodal β-substituted porphyrin donors EHDPP-Por and BODPP-Por are synthesized, in which four DPP (diketopyrrolopyrrole) units are connected symmetrically with acetylene at four of the β-positions, for OSCs. The all-small-molecule organic solar cells based on EHDPP-Por:Y6 and BODPP-Por:Y6 active layers achieved power conversion efficiencies of 10.19 and 10.99%, respectively, which are higher than most of the binary OSCs based on the porphyrins functionalized at the meso-positions, demonstrating that β-functionalized porphyrins are very promising for OSCs.

Porphyrin Acceptors with Two Perylene Diimide Dimers for Organic Solar Cells

Three small-molecule acceptors (Por-PDI, TEHPor-PDI, and BBOPor-PDI) with different side chains were synthesized by using a porphyrin core as the electron-donating unit and connecting electron-withdrawing perylene diimide dimers via acetylene bridges. The bulk heterojunction organic solar cells based on the three acceptors and a polymer donor provided power conversion efficiencies (PCEs) of 3.68-5.21 % when the active layers were fabricated with pyridine additives. Though the synthesis of Por-PDI is easier with fewer reaction steps and higher yields, the devices based on Por-PDI showed the best performance with a PCE of 5.21 %. The more ordered intermolecular packing due to the reduced steric hindrance at the porphyrin core of Por-PDI could contribute to the more balanced hole/electron mobilities, higher maximum charge generation rate, and less bimolecular recombination in Por-PDI devices, which are beneficial for the higher PCE.

Panchromatic Organoboron Molecules with Tunable Absorption Spectra

Panchromatic molecules, e. g. organic small molecules with wide absorption spectra, are very desirable for solar energy-related applications. Here, we report the development of a series of organoboron compounds composed of an organoboron core unit, two π-bridging units and two electron-withdrawing end-capping units. All seven molecules have the HOMO localized on the core unit and the LUMO delocalized on the whole conjugated backbone. They exhibit wide absorption spectra consisting of two strong absorption bands with the full width at half maximum of ca. 280 nm. These panchromatic compounds can be used as electron acceptors in organic solar cells. We elucidate the relationship between the chemical structures and opto-electronic properties of these organoboron panchromatic compounds. Increasing the electron-withdrawing capability of the core units results in a downshifted HOMO level as well as blueshifted long-wavelength absorption band with increased extinction coefficient. Extending the π-bridging units causes an increased HOMO level and blueshifted long-wavelength absorption band with increased extinction coefficients. Weakening the electron-withdrawing capability of the end-capping units leads to an upshifted LUMO level and blueshifted long-wavelength absorption peak with decreased extinction coefficient. This work provides insight into the absorption spectrum manipulation of panchromatic molecules and would pave the way for the development of solar energy-related applications.

Side-Chain Engineering of Benzodithiophene-Bridged Dimeric Porphyrin Donors for All-Small-Molecule Organic Solar Cells

Two new A-D-A small-molecule donors (C8T-BDTDP and C8ST-BDTDP) are prepared from benzodithiophene (BDT)-linked dimeric porphyrin (DP), which differ in side chains of BDT linkers with 4,8-bis[5-(2-ethylhexyl)thiophen-2-yl]benzo[1,2-b:4,5-b']dithiophene (C8T-BDT) for the former and 4,8-bis{5-[(2-ethylhexyl)thio]-2-thienyl}benzo[1,2-b:4,5-b']dithiophene (C8ST-BDT) for the latter. Both dimeric porphyrin donors show strongly UV-visible to near-infrared absorption. Compared to C8T-BDTDP, C8ST-BDTDP with an alkylthiothienyl-substituted BDT linker exhibits more intense absorption bands in the film and a lower highest occupied molecular orbital energy level. The blend film of the electron acceptor 6TIC with the respective dimeric porphyrin donor displays a broad photon response from 400 to 900 nm, unfortunately, with an absorption valley at ca. 600 nm. The device based on C8ST-BDTDP/6TIC demonstrates a promising power conversion efficiency (PCE) of 10.39% with a high short-circuit current density (J_SC) of 19.53 mA cm^-2, whereas the device based on C8T-BDTDP/6TIC shows a slightly lower PCE of 8.73% with a J_SC of 17.75 mA cm^-2. The better performance for C8ST-BDTDP/6TIC is mainly attributed to efficient charge dissociation and transportation because of the smooth surface morphology and highly ordered crystalline packing.

Recent progress in porphyrin- and phthalocyanine-containing perovskite solar cells

In this review, we summarize the application of porphyrins and phthalocyanines in perovskite solar cells to date. Since the first porphyrin- and phthalocyanine-based perovskite solar cells were reported in 2009, their power conversion efficiency has dramatically increased from 3.9% to over 20%. Porphyrins and phthalocyanines have mostly been used as the charge selective layers in these cells. In some cases, they have been used inside the perovskite photoactive layer to form two-dimensional perovskite structures. In other cases, they were used at the interface to engineer the surface energy level. This review gives a chronological introduction to the application of porphyrins and phthalocyanines for perovskite solar cells depending on their role. This review article also provides the history of porphyrin and phthalocyanine derivative development from the perspective of perovskite solar cell applications.

Low-Bandgap Porphyrins for Highly Efficient Organic Solar Cells: Materials, Morphology, and Applications

With developments in materials, thin-film processing, fine-tuning of morphology, and optimization of device fabrication, the performance of organic solar cells (OSCs) has improved markedly in recent years. Designing low-bandgap materials has been a focus in order to maximize solar energy conversion. However, there are only a few successful low-bandgap donor materials developed with near-infrared (NIR) absorption that are well matched to the existing efficient acceptors. Porphyrin has shown great potential as a useful building block for constructing low-bandgap donor materials due to its large conjugated plane and strong absorption. Porphyrin-based donor materials have been shown to contribute to many record-high device efficiencies in small molecule, tandem, ternary, flexible, and OSC/perovskite hybrid solar cells. Specifically, non-fullerene small-molecule solar cells have recently shown a high power conversion efficiency of 12% using low-bandgap porphyrin. All these have validated the great potential of porphyrin derivatives as effective donor materials and made DPPEZnP-TRs a family of best low-bandgap donor materials in the OSC field so far. Here, recent progress in the rational design, morphology, dynamics, and multi-functional applications starting from 2015 will be highlighted to deepen understanding of the structure-property relationship. Finally, some future directions of porphyrin-based OSCs are presented.

Design of single-porphyrin donors toward high open-circuit voltage for organic solar cells via an energy level gradient-distribution screening strategy of fragments: a theoretical study

Open-circuit voltage (V_OC) is a key factor for improving the power conversion efficiency (PCE) of bulk heterojunction (BHJ) organic solar cells (OSCs). At present, increasing attention has been devoted towards modifying π bridges in single-porphyrin small molecule donors with an A-π-D-π-A configuration to reduce the highest occupied molecular orbital (HOMO) levels and improve the V_OC of devices. However, how to screen the π bridges is a key issue. In this work, nine π bridges were screened by the HOMO level gradient-distribution strategy of fragments (electron-donating donor (D), π bridges, and electron-withdrawing acceptor (A)), where fragments meeting the requirements were combined into five novel small molecule donors. Meanwhile, in order to test whether the strategy is beneficial to increasing V_OC, [6,6]-phenyl C₆₁-butyric acid methyl ester (PC₆₁BM) was selected as the acceptor material. The energy levels of all molecules were compared and the photoelectric properties (i.e., energy gap, energy driving force, reorganization energy, intermolecular charge transfer rate, charge recombination rate, and V_OC) of the five small molecules were studied. The results showed that the HOMO levels of porphyrin donors could be significantly lowered via this strategy, and V_OC was raised without losing the short-circuit current (J_SC) and fill factor (FF) of the devices. Meanwhile, the designed five small molecules could be used as donor candidates to improve the performance of OSCs.

Phthalocyanines and porphyrinoid analogues as hole- and electron-transporting materials for perovskite solar cells

Organic-inorganic lead halide perovskite absorbers in combination with electron and hole transporting selective contacts result in power conversion efficiencies of over 23% under AM 1.5 sun conditions. The advantage of perovskite solar cells is their simple fabrication through solution-processing methods either in n-i-p or p-i-n configurations. Using TiO₂ or SnO₂ as an electron transporting layer, a compositionally engineered perovskite as an absorber layer, and Spiro-OMeTAD as a HTM, several groups have reported over 20% efficiency. Though perovskite solar cells reached comparable efficiency to that of crystalline silicon ones, their stability remains a bottleneck for commercialization partly due to the use of doped Spiro-OMeTAD. Several organic and inorganic hole transporting materials have been explored to increase the stability and power conversion efficiency of perovskite solar cells. IIn this review, we analyse the stability and efficiency of perovskite solar cells incorporating phthalocyanine and porphyrin macrocycles as hole- and electron transporting materials. The π-π stacking orientation of these macrocycles on the perovskite surface is important in facilitating a vertical charge transport, resulting in high power conversion efficiency.

Near-IR Absorbing D-A-D Zn-Porphyrin-Based Small-Molecule Donors for Organic Solar Cells with Low-Voltage Loss

Two D-A-D small molecules with a DPP acceptor core and Zn-porphyrin donor with different electron-donating substituents, namely, 2,6-bis(dodecyloxy)phenyl and 5-hexylthieno[3,2- b]thiophen-2-yl at mesopositions, VC4 and VC5, were synthesized, and their optical and electrochemical properties were investigated. The results reveal that both molecules are suitable as donors for organic solar cells (OSCs) in which PC₇₁BM is employed as the acceptor. Overall power conversion efficiencies of 8.05% ( J_sc = 13.83 mA/cm², V_oc = 0.91 V, and FF = 0.64) and 8.89% ( J_sc = 16.98 mA/cm², V_oc = 0.79 V, and FF = 0.663) were obtained, respectively. The high V_oc value for the VC4-based OSC correlates with the deeper HOMO, whereas the high J_sc value for VC5 may be attributed to the extended absorption spectrum toward the longer wavelength region. Moreover, the relatively high FF value for VC5-based OSCs as compared to the VC4 counterparts may be related to the more balanced charge transport in the active layer, reduced charge recombination, and efficient charge collection. The energy loss for VC5 is smaller (0.52 eV) than that for VC4 (0.56 eV).

Panchromatic Ternary Organic Solar Cells with Porphyrin Dimers and Absorption-Complementary Benzodithiophene-based Small Molecules

Diketopyrrolopyrrole-ethynylene-bridged porphyrin dimers are capped with electron-deficient 3-ethylrhodanine (A₂) via a π-bridge of phenylene ethynylene, affording two new acceptor-donor-acceptor structural porphyrin dimers (DPP-2TTP and DPP-2TP) with strong absorption in ranges of 400-550 nm (Soret bands) and 700-900 nm (Q bands). Their intrinsic absorption deficiency between the Soret and Q bands could be perfectly compensated by a wide-bandgap small molecule DR3TBDTTF (D*) with absorption at 500-700 nm. Impressively, the optimal ternary device based on the blend films of DPP-2TPP, DR3TBDTTF (20 wt %), and PC₇₁BM shows a PCE of 11.15%, whereas the binary devices based on DPP-2TTP/PC₇₁BM and DPP-2TP/PC₇₁BM blend films exhibit PCEs of 9.30 and 8.23%, respectively. The high compatibility of the low bandgap porphyrin dimers with the wide-bandgap small molecule provides a new threesome with PC₇₁BM for highly efficient panchromatic ternary organic solar cells.

New dithienosilole- and dithienogermole-based BODIPY for solar cell applications

We report two efficient donor materials for organic solar cells, namely Si-BDP and Ge-BDP, composed by the novel union of thienyl Bodipy wings and a dithienosilole/dithienogermole core.

Efficient as-cast semi-transparent organic solar cells with efficiency over 9% and a high average visible transmittance of 27.6%

Efficient as-cast ST-OSCs based on a trifluorinated polymer donor PBFTT and a tetrachlorinated NF-acceptor IT-4Cl were fabricated and a high efficiency of 9.1% was achieved under a high AVT of 27.6% in the photopic region.

An investigation of the role acceptor side chains play in the processibility and efficiency of organic solar cells fabricated from small molecular donors featuring 3,4-ethylenedioxythiophene cores

Organic photovoltaic devices fabricated from small molecular donors continue to receive significant interest due to their desirable properties such as convenient synthesis, purification and batch-to-batch reproducibility. In this study, we have synthesized two small molecules based on an alternating A–D–A structure, utilizing a central EDOT donor moiety and either 2-ethylhexyl cyanoacetate (SAM-72) or N-(2-ethylhexyl)cyanoacetamide (SAM-80) units as acceptor termini. The small molecules were incorporated into bulk heterojunction solar cells with PC₇₁BM. Our investigations have shown that the side chains utilized for SAM-80 only allow for solution processing using volatile solvents, such as chloroform, which limits the reproducibility of device fabrication. However, SAM-72 displays better solubility and devices fabricated using a SAM-72:PC₇₁BM active layer reached average power conversion efficiencies of 1.9%, with fill factors reaching 60%. Post-processing methods such as thermal and solvent vapor annealing were found to significantly increase the stability of devices, but were not able to improve overall device performance.

The chemical nature of the acceptor side chain plays an important role in the processability and photovoltaic performance of EDOT-based small molecule donors.

Effect of Side Groups on the Photovoltaic Performance Based on Porphyrin-Perylene Bisimide Electron Acceptors

In this work, we developed four porphyrin-based small molecular electron acceptors for non-fullerene organic solar cells, in which different side groups attached to the porphyrin core were selected in order to achieve optimized performance. The molecules contain porphyrin as the core, perylene bisimides as end groups, and the ethynyl unit as the linker. Four side groups, from 2,6-di(dodecyloxy)phenyl to (2-ethylhexyl)thiophen-2-yl, pentadecan-7-yl, and 3,5-di(dodecyloxy)phenyl unit, were applied into the electron acceptors. The new molecules exhibit broad absorption spectra from 300 to 900 nm and high molar extinction coefficients. The molecules as electron acceptors were applied into organic solar cells, showing increased power conversion efficiencies from 1.84 to 5.34%. We employed several techniques, including photoluminescence spectra, electroluminescence spectra, atomic force microscopy, and grazing-incidence wide-angle X-ray to probe the blends to find the effects of the side groups on the photovoltaic properties. We found that the electron acceptors with 2,6-di(dodecyloxy)phenyl units show high-lying frontier energy levels, good crystalline properties, and low nonradiative recombination loss, resulting in possible large phase separation and low energy loss, which is responsible for the low performance. Our results provide a detailed study about the side groups of non-fullerene materials, demonstrating that porphyrin can be used to design electron acceptors toward near-infrared absorption.

Panchromatic ternary organic solar cells with 9.44% efficiency incorporating porphyrin-based donors

In an effort to improve the short-circuit current and fill factor, organic solar cells have been developed with ternary blending in a single bulk heterojunction active layer. We report here several all small molecule organic solar cells based on ternary bulk heterojunction active layers. These layers consist of two small molecule porphyrin donors (MV71 and MV72), which have the same backbone but different end-capping acceptor units, and PC71BM as the acceptor. The organic solar cells showed overall power conversion efficiencies of 3.21% and 4.03% for the as-cast MV71:PC71BM and MV72:PC71BM binary active layers, respectively. However, the power conversion efficiency of the ternary active layer, i.e., MV71:MV72:PC71BM (0.2 : 0.8 : 2), was 6.72% and this is higher than the two binary active layer counterparts. The enhancement in the PCE of the ternary active layer is mainly related to the improvement in both the short-circuit current and fill factor and is related to the synergistic effect of the good miscibility of the two donors and improved hole transportation due to the slightly deeper highest occupied molecular orbital energy level of MV72 than MV71. The PCE was further improved to 9.44% with an enhanced short-circuit current and fill factor when the ternary active layer was subjected to solvent vapour annealing for 40 seconds. The ternary organic solar cells showed higher values of the incident photon to current conversion efficiency across the entire wavelength region when compared to the binary counterparts. The same donor backbone facilitates miscibility at the molecular level and the different HOMO and LUMO energy levels of the donors enable charge transport in the devices based on the ternary active layers. The increase in the power conversion efficiency after SVA treatment may be attributed to the migration of MV71 from the mixed region to the donor-acceptor (D-A) interfaces, which in turn affects the charge transfer and recombination processes and is confirmed by the impedance spectroscopy and dark current-voltage measurements.

Ni-Porphyrin-based small molecule for efficient organic solar cells (>9.0%) with a high open circuit voltage of over 1.0 V and low energy loss

Ni-Porphyrin, employed as electrondonor in BHJ-OSC, provides a low photon energy loss (0.52 eV), high voltage (1.08 V) and a PCE above 9.1%.

Spectroscopic characterization of free-base hydroxy(arylethynyl)porphyrins in acidic and basic media

The addition of arylethynyl groups to the porphyrin macrocycle represents an effective strategy with which to enhance the light-harvesting properties of porphyrins. We now extend this modification to arylethynyl porphyrins with two or four [Formula: see text]-hydroxyphenyl substituents. Arylethynyl porphyrins bearing four, but not two, [Formula: see text]-hydroxyphenyl substituents show evidence of aggregation under acidic conditions. Under basic conditions, deprotonation of the peripheral hydroxyphenyl substituents results in substantially red-shifted spectral features and enhanced absorption in the Q-band region. When the hydroxyphenyl groups are appended to the porphyrin macrocylce via the ethynyl spacers, the spectral shifts observed upon deprotonation are significantly enhanced relative to those observed for hydroxyphenylporphyrins, highlighting the role of expanded conjugation in altering porphyrin photophysics.

Ternary Solar Cells Based on Two Small Molecule Donors with Same Conjugated Backbone: The Role of Good Miscibility and Hole Relay Process

Ternary organic solar cells (OSCs) are very attractive for further enhancing the power conversion efficiencies (PCEs) of binary ones but still with a single active layer. However, improving the PCEs is still challenging because a ternary cell with one more component is more complicated on phase separation behavior. If the two donors or two acceptors have similar chemical structures, good miscibility can be expected to reduce the try-and-error work. Herein, we report ternary devices based on two small molecule donors with the same backbone but different substituents. Whereas both binary devices show PCEs about 9%, the PCE of the ternary cells is enhanced to 10.17% with improved fill factor and short-circuit current values and external quantum efficiencies almost in the whole absorption wavelength region from 440 to 850 nm. The same backbone enables the donors miscible at molecular level, and the donor with a higher HOMO level plays hole relay process to facilitate the charge transportation in the ternary devices. Since side-chain engineering has been well performed to tune the active materials' energy levels in OSCs, our results suggest that their ternary systems are promising for further improving the binary cells' performance although their absorptions are not complementary.

Study of Arylamine-Substituted Porphyrins as Hole-Transporting Materials in High-Performance Perovskite Solar Cells

To develop new hole-transporting materials (HTMs) for efficient and stable perovskite solar cells (PSCs), 5,10,15,20-tetrakis{4-[N,N-di(4-methoxylphenyl)amino-phenyl]}-porphyrin was prepared in gram scale through the direct condensation of pyrrole and 4-[bis(4-methoxyphenyl)amino]benzaldehyde. Its Zn(II) and Cu(II) complexes exhibit excellent thermal and electrochemical stability, specifically a high hole mobility and very favorable energetics for hole extraction that render them a new class of HTMs in organometallic halide PSCs. As expected, ZnP as HTM in PSCs affords a competitive power conversion efficiency (PCE) of 17.78%, which is comparable to that of the most powerful HTM of Spiro-MeOTAD (18.59%) under the same working conditions. Meanwhile, the metal centers affect somewhat the photovoltaic performances that CuP as HTM produces a lower PCE of 15.36%. Notably, the PSCs employing ZnP show a much better stability than Spiro-OMeTAD. Moreover, the two porphyrin-based HTMs can be prepared from relatively cheap raw materials with a facile synthetic route. The results demonstrate that ZnP and CuP can be a new class of HTMs for efficient and stable PSCs. To the best of our knowledge, this is the best performance that porphyrin-based solar cells could show with PCE > 17%.

Boosting Up Performance of Inverted Photovoltaic Cells from Bis(alkylthien-2-yl)dithieno[2,3-d:2',3'-d']benzo[1,2-b:4',5'-b']di thiophene-Based Copolymers by Advantageous Vertical Phase Separation

The photovoltaic cells (PVCs) from conjugated copolymers of PDTBDT-BT and PDTBDT-FBT with 5,10-bis(4,5-didecylthien-2-yl)dithieno[2,3-d:2',3'-d']benzo[1,2-b:4,5-b']dithiophene as electron donor moieties and benzothiadiazole and/or 5,6-difluorobenzothiadiazole as electron acceptor moieties are optimized by employing alcohol-soluble PFN (poly(9,9-bis(3'-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)) as cathode modification interlayer. The power conversion efficiencies (PCEs) of inverted PVCs (i-PVCs) from PDTBDT-BT and PDTBDT-FBT with devices configuration as ITO/PFN/active layer/MoO₃/Ag are increased from 4.97% to 8.54% and 5.92% to 8.74%, in contrast to those for the regular PVCs (r-PVCs) with devices configuration as ITO/PEDOT:PSS/active layer/Ca/Al under 100 mW/cm² AM 1.5 illumination. The optical modeling calculations and X-ray photoelectron spectroscopy (XPS) investigations reveal that the r-PVCs and i-PVCs from the copolymers exhibit similar light harvesting characteristics, and the enhancements of the PCEs of the i-PVCs from the copolymers are mainly contributed to the favorable vertical phase separation as the strongly polymer-enriched top surface layers and slightly PC₇₁BM (phenyl-C₇₁-butyric acid methyl ester)-enriched bottom surface layers are correspondingly connected to the anodes and cathodes of the i-PVCs, while they are opposite in the r-PVCs. As we known, it is the first time to experimentally verify that the i-PVCs with alcohol-soluble conjugated polymers cathode modification layers enjoy favorable vertical phase separation.

Modifying the Chemical Structure of a Porphyrin Small Molecule with Benzothiophene Groups for the Reproducible Fabrication of High Performance Solar Cells

A porphyrin-based molecule DPPEZnP-BzTBO with bulky benzothiophene groups was designed and synthesized as an electron donor material for bulk heterojunction (BHJ) solar cells. The optimized devices under thermal annealing (TA) and then chloroform solvent vapor anneanling (SVA) for 80 s exhibited an outstanding power conversion efficiencie (PCE) of 9.08%. Contrasted with the smaller thienyl substituted analogues we reported previously, DPPEZnP-BzTBO-based BHJ solar cells exhibited a higher open circuit voltage due to the lower highest occupied molecular orbital energy level. The TA post-treatment of the active layers induced the formation of more crystallized components, and the subsequent SVA provided a driving force for the domain growth, resulting in more obvious phase segregation between the donor and the acceptor in nanoscale. Furthermore, the PCEs kept above 95% upon the further SVA treatment within the time range of 60 to 95 s probably because the bulky benzothiophene groups retard the too quick change of crystallinity, providing a wide processing window for the reproducible device fabrication.

Molecular engineering and sequential cosensitization for preventing the "trade-off" effect with photovoltaic enhancement

In dye-sensitized solar cells (DSSCs), it is essential to use rational molecular design to obtain promising photosensitizers with well-matched energy levels and narrow optical band gaps. However, the "trade-off" effect between the photocurrent and photovoltage is still a challenge. Here we report four benzoxidazole based D-A-π-A metal-free organic dyes (WS-66, WS-67, WS-68 and WS-69) with different combinations of π-spacer units and anchoring-acceptor groups. Either extending the π-spacer or enhancing the electron acceptor can efficiently modulate the molecular energy levels, leading to a red-shift in the absorption spectra. The optimal dye, WS-69, containing a cyclopentadithiophene (CPDT) spacer and cyanoacetic acid acceptor, shows the narrowest energy band gap, which displays a very high photocurrent density of 19.39 mA cm-2, but suffers from a relatively low photovoltage of 696 mV, along with the so-called deleterious "trade-off" effect. A cosensitization strategy is further adopted for enhancing the device performance. Optimization of the dye loading sequence is found to be capable of simultaneously improving the photocurrent and photovoltage, and distinctly preventing the "trade-off" effect. The superior cosensitized cell exhibits an excellent power-conversion efficiency (PCE) of 10.09% under one-sun irradiation, and 11.12% under 0.3 sun irradiation, which constitutes a great achievement in that the efficiency of a pure metal-free organic dye with iodine electrolyte can exceed 11% even under relatively weak light irradiation. In contrast with the previous cosensitization strategy which mostly focused on compensation of light-harvesting, we propose a novel cosensitization architecture, in which the large molecular-sized, high photocurrent dye WS-69 takes charge of broadening the light-harvesting region to generate a high short-circuit current (JSC) while the small molecular-sized, high photovoltage dye WS-5 is responsible for retarding charge recombination to generate a high open-circuit voltage (VOC). In addition, adsorption amount and photo-stability studies suggest that the cyano group in the anchoring acceptor is important for the stability since it is beneficial towards decreasing the LUMO levels and enhancing the binding of dyes onto TiO2 nanocrystals.

New Terthiophene-Conjugated Porphyrin Donors for Highly Efficient Organic Solar Cells

To mimic the natural photosynthetic systems utilizing chlorophylls to absorb light and store light energy, two new porphyrin-based small molecules of PTTR and PTTCNR have been developed for photovoltaic applications. The highest power conversion efficiency of 8.21% is achieved, corresponding to a short-circuit current of 14.30 mA cm^-2, open-circuit voltage of 0.82 V, and fill factor of 70.01%. The excellent device performances can be ascribed to the engineering of molecule structure and film morphology. The horizontal conjugation of 3,3″-dihexyl-terthiophene to porphyrin-core with the vertical aliphatic 2-octylundecyl peripheral substitutions, can not only effectively increase the solar flux coverage between the conventional Soret and Q bands of porphyrin unit, but also optimize molecular packing through polymorphism associated with side-chains and the linear π-conjugated backbones. And the additive of 1,8-diiodooctane and subsequent chloroform solvent vapor annealing facilitate the formation of the blend films with [6,6]-phenyl-C₇₁-butyric acid methyl ester (PC₇₁BM) characteristics of bicontinuous, interpenetrating networks required for efficient charge separation and transportation.