Highly grafted polystyrene/polyvinylpyridine polymer gold nanoparticles in a good solvent: effects of chain length and composition

Phase Behavior of Polydisperse Y-Shaped Polymer Brushes under Good Solvent Conditions

Y-shaped polymer brushes represent a special class of binary mixed polymer brushes, in which a combination of different homopolymers leads to unique phase behavior. While most theoretical and simulation studies use monodisperse models, experimental systems are always polydisperse. This discrepancy hampers linking theoretical and experimental results. In this theoretical study, we employed dissipative particle dynamics to study the influence of polydispersity on the phase behavior of Y-shaped brushes grafted to flat surfaces under good solvent conditions. Polydispersity was kept within experimentally achievable values and was modeled via Schulz-Zimm distribution. In total, 10 systems were considered, thus covering the phase behavior of monodisperse, partially polydisperse and fully polydisperse systems. Using such generic representation of real polymers, we observed a rippled structure and aggregates in monodisperse systems. In addition, polydisperse brushes formed a stable perforated layer not observed previously in monodisperse studies, and influenced the stability of the remaining phases. Although the perforated layer was experimentally observed under good solvent conditions and in the melt state, further confirmation of its presence in systems under good solvent conditions required mapping real polymers onto mesoscale models that reflected, for example, different polymer rigidity, and excluded volume effects or direct influence of the surface, just to mention a few parameters. Finally, in this work, we show that mesoscale modeling successfully describes polydisperse models, which opens the way for rapid exploring of complex systems such as polydisperse Y-shaped brushes in selective or bad solvents or under non-equilibrium conditions.

Self-Assembly of Symmetric Copolymers in Slits with Inert and Attractive Walls

Although the behavior of the confined semi-dilute solutions of self-assembling copolymers represents an important topic of basic and applied research, it has eluded the interest of scientists. Extensive series of dissipative particle dynamics simulations have been performed on semi-dilute solutions of A5B5 chains in a selective solvent for A in slits using a DL-MESO simulation package. Simulations of corresponding bulk systems were performed for comparison. This study shows that the associates in the semi-dilute bulk solutions are partly structurally organized. Mild steric constraints in slits with non-attractive walls hardly affect the size of the associates, but they promote their structural arrangement in layers parallel to the slit walls. Attractive walls noticeably affect the association process. In slits with mildly attractive walls, the adsorption competes with the association process. At elevated concentrations, the associates start to form in wide slits when the walls are sparsely covered by separated associates, and the association process prevents the full coverage of the surface. In slits with strongly attractive walls, adsorption is the dominant behavior. The associates form in wide slits at elevated concentrations only after the walls are completely and continuously covered by the adsorbed chains.

Adsorption of amphiphilic grafted polymers as polymer corrosion inhibitors: insights from mesoscopic simulations

The homogeneous covering of amphiphillic polymer molecules onto metallic surfaces is of great importance for corrosion inhibitor applications. Lyophillic side chains grafted onto a lyophobic backbone act as anchors that allow the molecule to absorb at the metallic surface preventing the exposure with the solvent. Coarse-grained simulations are used to study the sorption and conformation behaviour of amphiphillic grafted polymers for corrosion inhibition. The backbone insolubility is found to play a key role in the sorption and conformation behaviour in the dilute limit. For finite concentrations, moderate backbone solubility and moderate molecule concentrations achieve optimal surface coverage, while highly a lyophobic backbone leads to bulk-like structures as a consequence of aggregation.

Temperature-responsive morphology formation of a PS-b-PI copolymer: a dissipative particle dynamics simulation study

Self-assembly responsiveness to stimuli of polystyrene-block-polyisoprene (PS-b-PI) diblock copolymer materials is explored by means of classical molecular dynamics (MD) and dissipative particle dynamics (DPD) simulations. A concerted relationship between the parameters achieved from atomistic and DPD simulations is obtained for this molecular recognition as clearly pronounced in a phase transition. Effects of temperature, model size and composition on the morphological formation were systematically investigated for the diblock copolymeric system. Structural changes resulting in the evolution of rheology as well as an equilibrium ordered structure were analyzed in terms of order parameters and radial distribution functions. From our models, various morphologies were observed including discrete clusters (sphere-liked morphology), connected clusters (gyroid-liked morphology), hexagonally packed cylinders (HEX), connected cylinders, irregular cylinders, perfect lamellae, perforated lamellae and defected lamellae. Based on this finding, a bottom-up multi-scale simulation of the PS-b-PI diblock copolymer provides a link between equilibrium copolymeric morphologies and the crucial parameters.

Interface and Interphase in Polymer Nanocomposites with Bare and Core-Shell Gold Nanoparticles

Metal nanoparticles are used to modify/enhance the properties of a polymer matrix for a broad range of applications in bio-nanotechnology. Here, we study the properties of polymer/gold nanoparticle (NP) nanocomposites through atomistic molecular dynamics, MD, simulations. We probe the structural, conformational and dynamical properties of polymer chains at the vicinity of a gold (Au) NP and a functionalized (core/shell) Au NP, and compare them against the behavior of bulk polyethylene (PE). The bare Au NPs were constructed via a systematic methodology starting from ab-initio calculations and an atomistic Wulff construction algorithm resulting in the crystal shape with the minimum surface energy. For the functionalized NPs the interactions between gold atoms and chemically adsorbed functional groups change their shape. As a model polymer matrix we consider polyethylene of different molecular lengths, from the oligomer to unentangled Rouse like systems. The PE/Au interaction is parametrized via DFT calculations. By computing the different properties the concept of the interface, and the interphase as well, in polymer nanocomposites with metal NPs are critically examined. Results concerning polymer density profiles, bond order parameter, segmental and terminal dynamics show clearly that the size of the interface/interphase, depends on the actual property under study. In addition, the anchored polymeric chains change the behavior/properties, and especially the chain density profile and the dynamics, of the polymer chain at the vicinity of the Au NP.

Phase Behavior of Gradient Copolymer Melts with Different Gradient Strengths Revealed by Mesoscale Simulations

Design and preparation of functional nanomaterials with specific properties requires precise control over their microscopic structure. A prototypical example is the self-assembly of diblock copolymers, which generate highly ordered structures controlled by three parameters: the chemical incompatibility between blocks, block size ratio and chain length. Recent advances in polymer synthesis have allowed for the preparation of gradient copolymers with controlled sequence chemistry, thus providing additional parameters to tailor their assembly. These are polydisperse monomer sequence, block size distribution and gradient strength. Here, we employ dissipative particle dynamics to describe the self-assembly of gradient copolymer melts with strong, intermediate, and weak gradient strength and compare their phase behavior to that of corresponding diblock copolymers. Gradient melts behave similarly when copolymers with a strong gradient are considered. Decreasing the gradient strength leads to the widening of the gyroid phase window, at the expense of cylindrical domains, and a remarkable extension of the lamellar phase. Finally, we show that weak gradient strength enhances chain packing in gyroid structures much more than in lamellar and cylindrical morphologies. Importantly, this work also provides a link between gradient copolymers morphology and parameters such as chemical incompatibility, chain length and monomer sequence as support for the rational design of these nanomaterials.

Metal Coordination Induces Phase Segregation in Amphipolar Arborescent Copolymers with a Core-Shell-Corona Architecture

Arborescent copolymers with a core-shell-corona (CSC) architecture were synthesized and the topology of the molecules was challenged (constrained) through intramolecular interactions, resulting in phase separation breaking the symmetry of radial density. The inner poly(2-vinylpyridine) shell of these arborescent polystyrene-g-[poly(2-vinylpyridine)-b-polystyrene] molecules can self-assemble by binding metallic salts and acids in apolar and intermediate-polarity solvents. Upon loading with HAuCl4, the characteristics of the polymer templates govern the "loading sites" of the metal within the molecules. Unique morphologies were observed for the metal-loaded G0-G4 arborescent copolymers investigated, namely, spherical, toroidal, raspberry-like, spherical nanocage, and a new worm-in-sphere morphology. The reason for the emergence of such morphologies is the interplay among intramolecular interactions of unlike polymer segments, solvent selectivity, the entropic elasticity of the arborescent substrate, and phase segregation induced by coordination with the charged metallic species. Meanwhile, the stability of the arborescent molecules against aggregation provides intramolecular phase segregation with imposed "confined" geometry and thus leads to nonconventional morphologies. Furthermore, the size of the arborescent molecules is much smaller than that of other known particles (droplets) serving as confined geometries. Computer simulations were used to model the mesostructure of the arborescent copolymers, to demonstrate the influence of solvent selectivity, together with HAuCl4 loading, on the evolution of the morphology of the macromolecules.

Tuning the Properties of Nanogel Surfaces by Grafting Charged Alkylamine Brushes

Nanogels are chemically crosslinked polymeric nanoparticles endowed with high encapsulation ability, tunable size, ease of preparation, and responsiveness to external stimuli. The presence of specific functional groups on their surfaces provides an opportunity to tune their surface properties and direct their behavior. In this work, we used mesoscale modeling to describe conformational and mechanical properties of nanogel surfaces formed by crosslinked polyethylene glycol and polyethyleneimine, and grafted by charged alkylamine brushes of different lengths. Simulations show that both number of chains per area and chain length can be used to tune the properties of the coating. Properly selecting these two parameters allows switching from a hydrated, responsive coating to a dried, highly charged layer. The results also suggest that the scaling behavior of alkylamine brushes, e.g., the transition from a mushroom to semi-dilute brush, is only weakly coupled with the shielding ability of the coating and much more with its compressibility.

Gelation of patchy ligand shell nanoparticles decorated by liquid-crystalline ligands: computer simulation study

We consider the coarse-grained modelling of patchy ligand shell nanoparticles with liquid crystalline ligands. The cases of two, three, four and six symmetrically arranged patches of ligands are discussed, as well as the cases of their equatorial and icosahedral arrangement. A solution of decorated nanoparticles is considered within a slit-like pore with solid walls and the interior filled by a polar solvent. The ligands form physical cross-links between the nanoparticles due to strong liquid crystalline interaction, turning the solution into a gel-like structure. Gelation is carried out repeatedly starting each time from a freshly equilibrated dispersed state of nanoparticles. The gelation dynamics and the range of network characteristics of the gel are examined, depending on the type of patchy decoration and on the solution density. Emphasis is given to the theoretical prediction of the type of decoration and the solution density most suitable for producing a uniformly cross-linked and highly elastic gel structure.

Synthesis and self-assembly behavior of polyhedral oligomeric silsesquioxane-based triblock copolymers in selective solvents by dissipative particle dynamics simulation

Self-assembly behaviors of POSS-based triblock copolymers were studied by DPD, and the results were in qualitative agreement with the experimental data.

Adsorption of amphiphilic graft copolymers in solvents selective for the grafts on a lyophobic surface: a coarse-grained simulation study

The sorption of graft copolymers on surfaces attractive only for the backbone and its effect on the conformational behavior of adsorbed/desorbed chains in solvents good for the grafts and poor for the backbone was studied by coarse-grained computer simulations.

Directed assembly of functionalized nanoparticles with amphiphilic diblock copolymers

We theoretically propose a simple approach to achieve soft nanoparticles with a self-patchiness nature, which are further directed to assemble into a rich variety of highly ordered superstructures.

Patchy and Janus Nanoparticles by Self-Organization of Mixtures of Fluorinated and Hydrogenated Alkanethiolates on the Surface of a Gold Core

The spontaneous self-organization of dissimilar ligands on the surface of metal nanoparticles is a very appealing approach to obtain anisotropic "spherical" systems. In addition to differences in ligand length and end groups, a further thermodynamic driving force to control the self-assembled monolayer organization may become available if the ligands are inherently immiscible, as is the case of hydrogenated (H-) and fluorinated (F-) species. Here, we validate the viability of this approach by combining ¹⁹F NMR experiments and multiscale molecular simulations on large sets of mixed-monolayer-protected gold nanoparticles (NPs). The phase segregation of blends of F- and H-thiolates grafted on the surface of gold NPs allows a straightforward approach to patterned mixed monolayers, with the shapes of the monolayer domains being encoded in the structure of the F/H-thiolate ligands. The results obtained from this comprehensive study offer molecular design rules to achieve a precise control of inorganic nanoparticles protected by specifically patterned monolayers.

Self-Assembly of Colloidal Nanocrystals: From Intricate Structures to Functional Materials

Chemical methods developed over the past two decades enable preparation of colloidal nanocrystals with uniform size and shape. These Brownian objects readily order into superlattices. Recently, the range of accessible inorganic cores and tunable surface chemistries dramatically increased, expanding the set of nanocrystal arrangements experimentally attainable. In this review, we discuss efforts to create next-generation materials via bottom-up organization of nanocrystals with preprogrammed functionality and self-assembly instructions. This process is often driven by both interparticle interactions and the influence of the assembly environment. The introduction provides the reader with a practical overview of nanocrystal synthesis, self-assembly, and superlattice characterization. We then summarize the theory of nanocrystal interactions and examine fundamental principles governing nanocrystal self-assembly from hard and soft particle perspectives borrowed from the comparatively established fields of micrometer colloids and block copolymer assembly. We outline the extensive catalog of superlattices prepared to date using hydrocarbon-capped nanocrystals with spherical, polyhedral, rod, plate, and branched inorganic core shapes, as well as those obtained by mixing combinations thereof. We also provide an overview of structural defects in nanocrystal superlattices. We then explore the unique possibilities offered by leveraging nontraditional surface chemistries and assembly environments to control superlattice structure and produce nonbulk assemblies. We end with a discussion of the unique optical, magnetic, electronic, and catalytic properties of ordered nanocrystal superlattices, and the coming advances required to make use of this new class of solids.