Bigels formed via spinodal decomposition of unfolded protein

Topical Formulations Based on Ursolic Acid-Loaded Nanoemulgel with Potential Application in Psoriasis Treatment

Psoriasis is a chronic disorder that causes a rash with itchy, scaly patches. It affects nearly 2-5% of the worldwide population and has a negative effect on patient quality of life. A variety of therapeutic approaches, e.g., glucocorticoid topical therapy, have shown limited efficacy with systemic adverse reactions. Therefore, novel therapeutic agents and physicochemical formulations are in constant need and should be obtained and tested in terms of effectiveness and minimization of side effects. For that reason, the aim of our study was to design and obtain various hybrid systems, nanoemulgel-macroemulsion and nanoemulgel-oleogel (bigel), as vehicles for ursolic acid (UA) and to verify their potential as topical formulations used in psoriasis treatment. Obtained topical formulations were characterized by conducting morphological, rheological, texture, and stability analysis. To determine the safety and effectiveness of the prepared ursolic acid carriers, in vitro studies on human keratinocyte cell-like HaCaT cells were performed with cytotoxicity analysis for individual components and each formulation. Moreover, a kinetic study of ursolic acid release from the obtained systems was conducted. All of the studied UA-loaded systems were well tolerated by keratinocyte cells and had suitable pH values and stability over time. The obtained formulations exhibit an apparent viscosity, ensuring the appropriate time of contact with the skin, ease of spreading, soft consistency, and adherence to the skin, which was confirmed by texture tests. The release of ursolic acid from each of the formulations is followed by a slow, controlled release according to the Korsmeyer-Peppas and Higuchi models. The elaborated systems could be considered suitable vehicles to deliver triterpene to psoriatic skin.

Polymorphic protein phase transitions driven by surface anisotropy

Phase transitions of proteins are strongly influenced by surface chemical modifications or mutations. Human γD-crystallin (HGD) single-mutants have been extensively studied because they are associated with the onset of juvenile cataract. However, they have also provided a rich library of molecules to examine how specific inter-protein interactions direct protein assembly, providing new insights and valuable experimental data for coarse-grained patchy-particle models. Here, we demonstrate that the addition of new inter-protein interactions by mutagenesis is additive and increases the number and variety of condensed phases formed by proteins. When double mutations incorporating two specific single point mutations are made, the properties of both single mutations are retained in addition to the formation of a new condensed phase. We find that the HGD double-mutant P23VC110M self-assembles into spherical particles with retrograde solubility, orthorhombic crystals, and needle/plate shape crystals, while retaining the ability to undergo liquid-liquid phase separation. This rich polymorphism is only partially predicted by the experimental data on the constituent single mutants. We also report a previously un-characterized amorphous protein particle, with unique properties that differ from those of protein spherulites, protein particulates previously described. The particles we observe are amorphous, reversible with temperature, tens of microns in size, and perfectly spherical. When they are grown on pristine surfaces, they appear to form by homogeneous nucleation, making them unique, and we believe a new form of protein condensate. This work highlights the challenges in predicting protein behavior, which has frustrated rational assembly and crystallization but also provides rich data to develop new coarse-grained models to explain the observed polymorphism.

Real space analysis of colloidal gels: triumphs, challenges and future directions

Colloidal gels constitute an important class of materials found in many contexts and with a wide range of applications. Yet as matter far from equilibrium, gels exhibit a variety of time-dependent behaviours, which can be perplexing, such as an increase in strength prior to catastrophic failure. Remarkably, such complex phenomena are faithfully captured by an extremely simple model-'sticky spheres'. Here we review progress in our understanding of colloidal gels made through the use of real space analysis and particle resolved studies. We consider the challenges of obtaining a suitable experimental system where the refractive index and density of the colloidal particles is matched to that of the solvent. We review work to obtain a particle-level mechanism for rigidity in gels and the evolution of our understanding of time-dependent behaviour, from early-time aggregation to ageing, before considering the response of colloidal gels to deformation and then move on to more complex systems of anisotropic particles and mixtures. Finally we note some more exotic materials with similar properties.

Decorated networks of native proteins: nanomaterials with tunable mesoscopic domain size

Natural and artificial proteins with designer properties and functionalities offer unparalleled opportunity for functional nanoarchitectures formed through self-assembly. However, to exploit this potential we need to design the system such that assembly results in desired architecture forms while avoiding denaturation and therefore retaining protein functionality. Here we address this challenge with a model system of fluorescent proteins. By manipulating self-assembly using techniques inspired by soft matter where interactions between the components are controlled to yield the desired structure, we have developed a methodology to assemble networks of proteins of one species which we can decorate with another, whose coverage we can tune. Consequently, the interfaces between domains of each component can also be tuned, with potential applications for example in energy - or electron - transfer. Our model system of eGFP and mCherry with tuneable interactions reveals control over domain sizes in the resulting networks.

DAP derived fatty acid amide organogelators as novel carrier for drug incorporation and pH-responsive release

Low-molecular mass fatty acid amide gelators were synthesized using 2,6-diaminopyridine as a linker and alkyl chains of varying lengths. The prepared organogel-elusions are able to trap and release ibuprofen molecule without changing its structure and activity.

Multi-component colloidal gels: interplay between structure and mechanical properties

We present a detailed numerical study of multi-component colloidal gels interacting sterically and obtained by arrested phase separation. Under deformation, we found that the interplay between the different intertwined networks is key. Increasing the number of components leads to softer solids that can accommodate progressively larger strains before yielding. The simulations highlight how this is the direct consequence of the purely repulsive interactions between the different components, which end up enhancing the linear response of the material. Our work provides new insight into mechanisms at play for controlling the material properties and opens a road to new design principles for soft composite solids.

Functional Hydrogels and Their Application in Drug Delivery, Biosensors, and Tissue Engineering

Hydrogel is a new class of functional polymer materials with a promising potential in the biomedical field. The purpose of this article is to review recent advancements in several types of biomedical hydrogels, including conductive hydrogels, injectable hydrogels, double network hydrogels, responsive hydrogels, nanocomposite hydrogels, and sliding hydrogels. In comparison with traditional hydrogels, these advanced hydrogels exhibit significant advantages in structure, mechanical properties, and applications. The article focuses on different methods used to prepare advanced biomedical hydrogels and their diversified applications as drug delivery systems, wound dressings, biosensors, contact lenses, and tissue replacement. These advances are rapidly overcoming current limitations of hydrogels, and we anticipate that further research will lead to the development of advanced hydrogels with ubiquitous roles in biomedicine and tissue replacement and regeneration.

Using cavitation rheology to understand dipeptide-based low molecular weight gels

The study of dipeptide-based hydrogels has been the focus of significant effort recently due to their potential for use in a variety of biomedical and biotechnological applications. It is essential to study the mechanical properties in order to fully characterise and understand this type of soft materials. In terms of mechanical properties, the linear elastic modulus is normally measured using traditional shear rheometry. This technique requires millilitre sample volumes, which can be difficult when only small amounts of gel are available, and can present difficulties when loading the sample into the machine. Here, we describe the use of cavitation rheology, an easy and efficient technique, to characterise the linear elastic modulus of a range of hydrogels. Unlike traditional shear rheometry, this technique can be used on hydrogels in their native environment, and small sample volumes are required. We describe our set-up and show how it can be used to probe and understand different types of gels. Gels can be formed by different triggers from the same gelator and this leads to different microstructures. We show that the data from the cavitational rheometer correlates with the underlying microstructure in the gels, which allows a greater degree of understanding of the gels than can be obtained from the bulk measurements.

Key characteristics and modelling of bigels systems: A review

Bigels are interesting semisolid formulations with better properties for different applications such as cosmetics and pharmaceutical systems. Due to the mixing of two phases of different nature (polar and apolar), bigels possess some interesting features like ability to deliver hydrophilic and hydrophobic drugs, better spreadability and water washability, improved permeability of drugs, enhanced hydration of stratum corneum and ability to manipulate the drug release rate. The main objective of this review article is to provide a thorough insight into the important characteristics of bigels together with the discussion on modelling of bigel systems to relate their properties with individual constituents and different parameters. Moreover, some important applications of bigels are also discussed by considering some examples from the literature.

Cage dynamics leads to double relaxation of the intermediate scattering function in a binary colloidal system

A system of binary colloids where one fraction of particles is aggregating by forming irreversible bonds and the other fraction of particles only interacts as hard spheres, is simulated using Brownian cluster dynamics. These aggregating species always formed percolating clusters for the case of diffusing hard spheres while for the static case, formation of percolating clusters depended on the fraction of static hard spheres in the system. The dynamics of the hard spheres inside the percolating clusters was studied by restarting the simulation after the kinetics of aggregation was arrested. Two cases were studied, one where the percolated particles moved within the bonds or cage dynamics was allowed and another where the movement within the bonds was not allowed or the cages were static. The hard spheres showed anomalous diffusion in both cases. The mean square displacement showed that for the case of dynamic cages we always had diffusive hard spheres irrespective of the fraction of hard spheres for volume fractions below 0.49. Static cages, depending on the fraction of hard spheres, showed either diffusive or arrested behavior of hard spheres. The intermediate scattering function of only the hard sphere particles showed double relaxation similar to the colloidal glass system for low volume fraction, where the fraction of hard sphere particles was small. For higher fractions we observed only a single stretched exponential. We could differentiate between slow and fast particles for both static and dynamic cages. For the case of static cages the hard spheres were permanently stuck inside the cages while for the case of dynamic cages almost all the hard spheres were moving in and out of the cages.

Lattice animals in diffusion limited binary colloidal system

In a soft matter system, controlling the structure of the amorphous materials has been a key challenge. In this work, we have modeled irreversible diffusion limited cluster aggregation of binary colloids, which serves as a model for chemical gels. Irreversible aggregation of binary colloidal particles leads to the formation of a percolating cluster of one species or both species which are also called bigels. Before the formation of the percolating cluster, the system forms a self-similar structure defined by a fractal dimension. For a one component system when the volume fraction is very small, the clusters are far apart from each other and the system has a fractal dimension of 1.8. Contrary to this, we will show that for the binary system, we observe the presence of lattice animals which has a fractal dimension of 2 irrespective of the volume fraction. When the clusters start inter-penetrating, we observe a fractal dimension of 2.5, which is the same as in the case of the one component system. We were also able to predict the formation of bigels using a simple inequality relation. We have also shown that the growth of clusters follows the kinetic equations introduced by Smoluchowski for diffusion limited cluster aggregation. We will also show that the chemical distance of a cluster in the flocculation regime will follow the same scaling law as predicted for the lattice animals. Further, we will also show that irreversible binary aggregation comes under the universality class of the percolation theory.

The mechanical properties of individual cell spheroids

The overall physical properties of tissues emerge in a complex manner from the properties of the component cells and other constituent materials from which the tissue is formed, across multiple length scales ranging from nanometres to millimetres. Recent studies have suggested that interfacial tension between cells contributes significantly to the mechanical properties of tissues and that the overall surface tension is determined by the ratio of adhesion tension to cortical tension. Using cavitation rheology (CR), we have measured the interfacial properties and the elastic modulus of spheroids formed from HEK cells. By comparing the work of bubble formation with deformation of the cell spheroid at different length scales, we have estimated the cortical tension for HEK cells. This innovative approach to understanding the fundamental physical properties associated with tissue mechanics may guide new approaches for the generation of materials to replace or regenerate damaged or diseased tissues.

Elastic cavitation and fracture via injection

The cavitation rheology technique extracts soft materials mechanical properties through pressure-monitored fluid injection. Properties are calculated from the system's response at a critical pressure that is governed by either elasticity or fracture (or both); however previous elementary analysis has not been capable of accurately determining which mechanism is dominant. We combine analyses of both mechanisms in order to determine how the full system thermodynamics, including far-field compliance, dictate whether a bubble in an elastomeric solid will grow through either reversible or irreversible deformations. Applying these analyses to experimental data, we demonstrate the sensitivity of cavitation rheology to microstructural variation via a co-dependence between modulus and fracture energy.