A novel ratiometric peptide-based fluorescent probe for sequential detection of Hg2+ and S2- ions and its application in living cells and zebrafish imaging

A new ratiometric peptide-based fluorescent probe DWPH was designed and synthesized, comprising dansyl fluorophore as a fluorescent dye, and tripeptide backbone (Trp-Pro-His-NH2) as a recognition group. The addition of Hg2+ caused the maximum emission peak of DWPH to blue shift from 560 nm to 510 nm. DWPH exhibited large Stokes shift (230 nm), satisfactory water solubility (100 % aqueous medium), good selectivity (only Hg2+), high sensitivity (24.6 nM), rapid response (within 50 s) and strong anti-interference ability for Hg2+ detection over a wide pH range (7-11). Additionally, the complex DWPH-Hg2+ as a relay response probe could also be applied to S2- according to displacement approach. Notably, the detection limit for S2- was calculated as 23.3 nM, exhibiting that DWPH showed great potential for environmental monitoring and bioimaging. In addition, DWPH were successfully used to determine Hg2+ and S2- in living cells and zebrafish based on excellent permeability and low cytotoxicity. What's more, the gradient concentration color changes of Hg2+ and S2- were combined with the smartphone APP to obtain red-green-blue (RGB) values, thus enabling rapid semi-quantitative detection of Hg2+ and S2- without expensive instruments.

Sulfonamides as Optical Chemosensors

Sulfonamides are auspicious chemosensors which are capable to bind with ionic species through various ways like complexation, charge transfer, proton transfer etc. and produce a detection signal in the form of an optical change either in visible or UV-light and for electronic as well as fluorimetric spectra. Sulfonamides have gained much attention of analytical chemists these days as these are inexpensive, robust, green in nature and some what sensitive and selective to many anionic and cationic species. Due to their promising versatility in sensing properties, these are under great consideration in forensic, environmental, analytical and biochemistry laboratories. This review narrates how sulfonamides are being used to optically sense ionic species.

A highly selective and sensitive Zn2+ fluorescent sensor based on zinc finger-like peptide and its application in cell imaging

Developing new chemosensors for detection of Zn²⁺ has attracted great attentions because of the important roles of Zn²⁺ in biological systems, and it will produce toxic effects with an excessive intake of zinc ion. Metalloproteins are often used as an effective template for the design and development of peptide-based fluorescent sensors. In this study, we designed a new and simple ratiometric fluorescent sensor for Zn²⁺, which was based on a zinc finger-like peptide and labeled with a dansyl group, i.e., Dansyl-His-Gln-Arg-Thr-His-Trp-NH₂ (D-P6), by using solid phase peptide synthesis (SPPS). The dimeric peptide has a high affinity for Zn²⁺ overothermetalions, as indicated by spectroscopic studies, as well as molecular modeling. Remarkably, the sensor exhibited a highly selective and sensitive ratiometric fluorescent response to Zn²⁺ by fluorescent resonance energy transfer effect between tryptophan residue and fluorophore dansyl group, with a very low detection limit of 33 nM in aqueous solution. Furthermore, the sensor displayed a very low biotoxicity, which allows successful detection of Zn²⁺ in living HeLa cells. We believe that the new sensor may have potential applications in biological science.

Chirality in peptide-based materials: From chirality effects to potential applications

Chirality is ubiquitous in nature with primary cellular functions that include construction of right-/left-handed helix and selective communications among diverse biomolecules. Of particularly intriguing are the chiral peptide-based materials that can be deliberately designed to change physicochemistry properties via tuning peptide sequences. Critically, understanding their chiral effects are fundamental for the development of novel materials in chemistry and biomedicine fields. Here, we review recent researches on chirality in peptide-based materials, summarizing relevant typical chiral effects towards recognition, amplification, and induction. Driven forces for the chiral discrimination in affinity interaction as well as the handedness preferences in supramolecular structure formation at both the macroscale and microscale are illustrated. The implementation of such chirality effects of artificial copolymers, assembled aggregates and their composites in the fields of bioseparation and bioenrichment, cell incubation, protein aggregation inhibitors, chiral smart gels, and bionic electro devices are also presented. At last, the challenges in these areas and possible directions are pointed out. The diversity of chiral roles in the origin of life and chirality design in different organic or composite systems as well as their applications in drug development and chirality detection in environmental protection are discussed.

Highly selective fluorescent peptide-based chemosensors for aluminium ions in aqueous solution

Two novel fluorescent peptide-based chemosensors, including A (2-amino-benzoyl-Ser-Glu-Glu-NH₂) and B (2-amino-benzoyl-Ala-Glu-Pro-Glu-Ala-Glu-Pro-NH₂) were synthesized and characterized by nuclear magnetic resonance (NMR) spectra. These fluorescent probes exhibited excellent selective and sensitive responses to Al³⁺ ions over other metal ions in aqueous buffered solutions. The limits of detection for both chemosensors towards the Al³⁺ ions were in the order of ∼10^-7 M (A: 155 nM and B: 195 nM), which clearly indicates that these probes have significant potential for biological applications. They also displayed high binding affinity (1.3029 × 10⁴ M^-1 and 1.7586 × 10⁴ M^-1 relevant to A and B respectively). These two chemosensors are great analytical probes that produce turn-on responses upon binding to Al³⁺ ions through an intramolecular charge transfer (ICT) mechanism. In addition, the application of both chemosensors was examined over a wide range of pH. The fluorescent peptide-based probes and Al³⁺ form a 1:1 coordination complex according to the ESI-MS and Job's plot analysis. Notably, upon addition of Al³⁺ to these chemosensors, a fluorescence enhancement of approximately 8-fold was observed and the binding mode was determined using NMR titration and fluorescence emission data.

A dual-functional colorimetric and fluorescent peptide-based probe for sequential detection of Cu2+ and S2- in 100% aqueous buffered solutions and living cells

Highly sensitive and selectivite detection of copper ions (Cu²⁺) and hydrogen sulfide (H₂S) have become important research topics due to the potential harmful impacts of these chemicals to human health and the environment. In this study, we report the synthesis of a dual-functional peptide-based probe L (FITC-AhxSerSerHis), designed to mimic a copper-sulfur metalloprotein, and capable of continuous detection of Cu²⁺ and S^2- based on colorimetric and fluorescent methods. The new probe L displayed excellent "turn off" fluorescence response and good selectivity for Cu²⁺ ions via a modification of the tripeptide and fluorescein isothiocyanate group, and produced an obvious color change visible to the naked eye. Furthermore, as an excitable probe, the L-Cu complex could continuously detect S^2- with high selectivity and sensitivity in 100% aqueous buffered solutions. The detection limits for fluorescence titration measurements, calculated using the equation 3σ/k, were 76.7 nM (Cu²⁺) and 27.2 nM (S^2-), which were well below U.S. EPA safety levels. In addition, L could be cycled to alternately detect Cu²⁺ and S^2-, thereby making it a promising reversible probe. Moreover, L was successfully applied to monitoring Cu²⁺ and S^2- in live RKO cells through fluorescence imaging, exhibiting low cytotoxicity and good cell permeability.

A novel peptide-based fluorescent probe for sensitive detection of zinc (II) and its applicability in live cell imaging

In this work, we report SPSS synthesis of a new peptide-based fluorescent probe (L) capable of detecting Zn²⁺ with little interference in 100% aqueous solutions at physiological pH. Furthermore, L showed excellent sensitivity, with a detection limit of 26.77 nM. The 2:1 binding ratio between L and Zn²⁺ was determined using fluorometric titration, Job's plot and ESI-MS analyses. The "off-on-off" type fluorescence change of L was demonstrated by alternately adding Zn²⁺ and EDTA based on a formation-separation process of the complex, indicating that L could serve as a reversible probe. Moreover, MTT studies demonstrated that L has low biotoxicity, and could be successfully used for detection of Zn²⁺ and EDTA in live cells.

Hg2+ and Cd2+ binding of a bioinspired hexapeptide with two cysteine units constructed as a minimalistic metal ion sensing fluorescent probe

Hg²⁺ and Cd²⁺ complexation of a short hexapeptide, Ac-DCSSCY-NH₂ (DY), was studied by pH-potentiometry, UV and NMR spectroscopy and fluorimetry in aqueous solutions and the Hg²⁺-binding ability of the ligand was also described in an immobilized form, where the peptides were anchored to a hydrophilic resin. Hg²⁺ was demonstrated to form a 1 : 1 complex with the ligand even at pH = 2.0 while Cd²⁺ coordination by the peptide takes place only above pH ∼ 3.5. Both metal ions form bis-ligand complexes by the coordination of four Cys-thiolates at ligand excess above pH ∼ 5.5 (Cd²⁺) and 7.0 (Hg²⁺). Fluorescence studies demonstrated a Hg²⁺ induced concentration-dependent quenching of the Tyr fluorescence until a 1 : 1 Hg²⁺ : DY ratio. The fluorescence emission intensity decreases linearly with the increasing Hg²⁺ concentration in a range of over two orders of magnitude. The fact that this occurs even in the presence of 1.0 eq. of Cd²⁺ per ligand reflects a complete displacement of the latter metal ion by Hg²⁺ from its peptide-bound form. The immobilized peptide was also shown to bind Hg²⁺ very efficiently even from samples at pH = 2.0. However, the existence of lower affinity binding sites was also demonstrated by binding of more than 1.0 eq. of Hg²⁺ per immobilized DY molecule under Hg²⁺-excess conditions. Experiments performed with a mixture of four metal ions, Hg²⁺, Cd²⁺, Zn²⁺ and Ni²⁺, indicate that this molecular probe may potentially be used in Hg²⁺-sensing systems under acidic conditions for the measurement of μM range concentrations.

Highly selective and sensitive detection of Zn(II) and Cu(II) ions using a novel peptide fluorescent probe by two different mechanisms and its application in live cell imaging

Metalloproteins are often a useful template for the design and development of peptide fluorescent probes. Herein, we report a novel and simple fluorescent probe L comprised of tetrapeptide and dansyl groups by the solid phase peptide synthesis (SPPS). As a multifunctional analytical probe, L exhibited a highly selective "turn-on" fluorescent response to zinc ions, and a selective "turn-off" fluorescent response to copper ions at an excitation wavelength of 330 nm. The high sensitivity of L was made possible photo-induced electron transfer (PET), and L exhibited very low detection limits for Zn²⁺ and Cu²⁺ of 4.9 nM and 15 nM in 100% aqueous solutions, respectively. Furthermore, L displayed very low biotoxicity and excellent cell permeability, and was successfully used for detection of Zn²⁺ and Cu²⁺ in living HeLa cells based on two different mechanisms. We believe that the probe L may have many potential applications in environmental and biological research.

A fluorescent dansyl-based peptide probe for highly selective and sensitive detect Cd2+ ions and its application in living cell imaging

We reported a novel and readily synthesized fluorescent "turn-on" probe L (Dansyl-Glu-Pro-Gly-Cys) based on dansyl group combine tetrapeptide. The probe L exhibited highly sensitive fluorescent recognition to Cd²⁺ ions in HEPES buffer solutions (10.0 mM, pH 7.4). The 2:1 binding stoichiometry of L with Cd²⁺ were determined based on fluorescence titration and the Job's plot investigation. The competitive experiments were found to be highly selective for the Cd²⁺ ions even in the existence of excess competing metal ions including Zn²⁺, Pb²⁺, Hg²⁺ and Cu²⁺ ions. The binding constant of the complex L-Cd was calculated to be 5.18 × 10¹⁰ M^-2, and showed great affinity compared to other probes. In addition, the detection limit of the probe L for Cd²⁺ ions was calculated to be 45 nM, which presented a pronounced sensitivity toward Cd²⁺ ions. Most importantly, the probe L had wide range of pH and good biocompatibility, and were successfully applied to selectively detected Cd²⁺ ions within pH range of 7-12 and bioimaging studies in live cells.

A selective and sensitive peptide-based fluorescent chemical DSH sensor for detection of zinc ions and application in vitro and in vivo

Here we report the design and synthesis of a peptide-based fluorescent chemical sensor (DSH sensor: Dansyl-Ser-Pro-Gly-His-Trp-Gly) for detecting Zn²⁺, based on fluorescence resonance energy transfer (FRET) from tryptophan (donor) to the dansyl fluorophore (acceptor).

High selective and sensitive detection of Zn(II) using tetrapeptide-based dansyl fluorescent chemosensor and its application in cell imaging

The zinc ions (Zn²⁺) play extremely irreplaceable role in the organism and the environment, the design and synthesis of a biomolecule-based fluorescence chemosensor for the detection of Zn²⁺ with high sensitivity is very important. Herein, a novel tetrapeptide-based dansyl fluorescent "turn-on" response chemosensor (L) has been designed and synthesized by solid phase peptide synthesis (SPPS). As designed, L can detect Zn²⁺ ions with specifically and sensitively based on photo-induced electron transfer (PET) mechanism in 100% aqueous solutions, and other metal ions do not interfere with Zn²⁺ ions recognition. The stoichiometric ratio of L with Zn²⁺ ions was 2:1, which matches with fluorescence titration and Job-plot assay. In addition, the reversibility and circularly process of the detection of L was confirmed by adding bonding agent Na₂EDTA. Moreover, L exhibits excellent biocompatibility and low biotoxicity with the limit of detection (LOD) for Zn²⁺ about 18 nM, and has been successfully utilized for fluorescence imaging of Zn²⁺ ions in living HeLa cells under physiological conditions.

Fluorescent peptide dH3w: A sensor for environmental monitoring of mercury (II)

Heavy metals are hazardous environmental contaminants, often highly toxic even at extremely low concentrations. Monitoring their presence in environmental samples is an important but complex task that has attracted the attention of many research groups. We have previously developed a fluorescent peptidyl sensor, dH3w, for monitoring Zn2+ in living cells. This probe, designed on the base on the internal repeats of the human histidine rich glycoprotein, shows a turn on response to Zn2+ and a turn off response to Cu2+. Other heavy metals (Mn2+, Fe2+, Ni2+, Co2+, Pb2+ and Cd2+) do not interfere with the detection of Zn2+ and Cu2+. Here we report that dH3w has an affinity for Hg2+ considerably higher than that for Zn2+ or Cu2+, therefore the strong fluorescence of the Zn2+/dH3w complex is quenched when it is exposed to aqueous solutions of Hg2+, allowing the detection of sub-micromolar levels of Hg2+. Fluorescence of the Zn2+/dH3w complex is also quenched by Cu2+ whereas other heavy metals (Mn2+, Fe2+, Ni2+, Co2+, Cd2+, Pb2+, Sn2+ and Cr3+) have no effect. The high affinity and selectivity suggest that dH3w and the Zn2+/dH3w complex are suited as fluorescent sensor for the detection of Hg2+ and Cu2+ in environmental as well as biological samples.

Exploration and application of a highly sensitive bis(salamo)-based fluorescent sensor for B4O72- in water-containing systems and living cells

A highly selective fluorescent sensor H4L based on a bis(salamo)-type compound with two N2O2 chelating moieties as ionophore was successfully developed. Sensor H4L was found to have excellent selectivity for B4O72- over many other anions (Br-, CI-, CN-, CO32-, HCO3-, H2PO4-, HSO4-, NO3-, OAc-, S2O3-, SCN-, SO42-, Hcy (homocysteine) and H2O2), and it exhibited an approximately 150-fold enhancement of the fluorescence response to B4O72- in Tris-HCl buffer (DMF/H2O = 9:1, v/v, pH = 7) solutions. Significantly, its fluorescence intensity was enhanced in a linear fashion with increasing concentrations of B4O72-. The detection limit of sensor H4L towards B4O72- was 8.61 × 10-7 M. The test strips could conveniently, efficiently and simply detect B4O72- ions in Tris-HCl buffer (DMF/H2O = 9:1, v/v, pH = 7) solutions. Furthermore, sensor H4L showed excellent membrane permeability in living cells, and it was successfully used to monitor intracellular B4O72- by confocal luminescence imaging.

Combined experimental and theoretical studies on selective sensing of zinc and pyrophosphate ions by rational design of compartmental chemosensor probe: Dual sensing behaviour via secondary recognition approach and cell imaging studies

A compartmental chemosensor probe HL was designed and synthesized for dual sensing of zinc ions and PPi via secondary recognition approach.

Sensitive ratiometric detection of Al(iii) ions in a 100% aqueous buffered solution using a fluorescent probe based on a peptide receptor

The peptidyl bioprobe detected Al(iii) ions sensitively in a 100% aqueous buffered solution through ratiometric response.

A new fluorescent PET sensor probe for Co2+ ion detection: computational, logic device and living cell imaging applications

A new probe, 2 exhibit quenching with Co²⁺ (∼80% at 634 nm) while 2·Co²⁺ ensemble exhibit enhancement with NO₃⁻ (∼82% at 632.5 nm). On–Off–On behavior of 2 (Co²⁺ and NO₃⁻ ions) the function of a sequential XNOR gate and can be utilized in live cell imaging.

A new peptide-based fluorescent probe selective for zinc(ii) and copper(ii)

A novel metal ion-sensitive fluorescent peptidyl-probe has been designed based on the most common five-residue repeat in mammalian histidine rich glycoproteins (HRGs). A dansyl-amide moiety at the N-terminus and a tryptophan residue at the C-terminus of the peptide were added as they can act as a FRET (fluorescence resonance energy transfer) pair. The dansyl fluorophore was chosen also because it frequently shows strong CHEF (chelation enhanced fluorescence) and solvatochromic effects. The designed peptide, dansyl-HPHGHW-NH₂ (dH3w), showed a selective fluorescence turn-on response to Zn²⁺ in aqueous solutions at pH 7.0 when excited at both 295 nm and 340 nm, thus indicating that both FRET and CHEF or solvatochromic effects are active in the metal/peptide complex. Steady-state fluorescence and isothermal titration calorimetry (ITC) measurements demonstrated that two peptide molecules bind to one zinc ion with an association constant K_a = 5.7 × 10⁵ M^-1 at 25 °C and pH 7.0. The fluorescence response to Zn²⁺ was not influenced by Pb²⁺, Cd²⁺, Mn²⁺, Fe²⁺, Fe³⁺, Mg²⁺, Ca²⁺, K⁺ and Na⁺ ions and only slightly influenced by Co²⁺ and Ni²⁺. Copper(ii), at concentrations as low as 5 μM, caused a strong quenching of both free and Zn²⁺ complexed dH3w. The determination of the binding parameters for Cu²⁺ has shown that one copper ion binds to one dH3w molecule with an association constant of 1.2 × 10⁶ M^-1 thus confirming the higher affinity of peptide for Cu²⁺ than for Zn²⁺. Finally, we demonstrated that dH3w can penetrate into HeLa cells and could thus be used for the determination of intracellular Zn²⁺ and Cu²⁺ concentrations.

Highly sensitive and selective detection of Al(III) ions in aqueous buffered solution with fluorescent peptide-based sensor

A fluorescent sensor based on a tripeptide (SerGluGlu) with a dansyl fluorophore detected selectively Al(III) among 16 metal ions in aqueous buffered solutions without any organic cosolvent. The peptide-based sensor showed a highly sensitive turn on response to aluminium ion with high binding affinity (1.84×10(4)M(-1)) in aqueous buffered solutions. The detection limit (230nM, 5.98ppb) of the peptide-based sensor was much lower than the maximum allowable level (7.41μM) of aluminium ions in drinking water demanded by EPA. The binding mode of the peptide sensor with aluminium ions was characterized using ESI mass spectrometry, NMR titration, and pH titration experiments.

Selective and Sensitive Detection of Heavy Metal Ions in 100% Aqueous Solution and Cells with a Fluorescence Chemosensor Based on Peptide Using Aggregation-Induced Emission

A fluorescent peptidyl chemosensor for the detection of heavy metal ions in aqueous solution as well as in cells was synthesized on the basis of the peptide receptor for the metal ions using an aggregation-induced emission fluorophore. The peptidyl chemosensor (1) bearing tetraphenylethylene fluorophore showed an exclusively selective turn-on response to Hg(2+) among 16 metal ions in aqueous buffered solution containing NaCl. The peptidyl chemosensor complexed Hg(2+) ions and then aggregated in aqueous buffered solution, resulting in the significant enhancement (OFF-On) of emissions at around 470 nm. The fluorescent sensor showed a highly sensitive response to Hg(2+), and about 1.0 equiv of Hg(2+) was enough for the saturation of the emission intensity change. The detection limit (5.3 nM, R(2) = 0.99) of 1 for Hg(2+) ions was lower than the maximum allowable level of Hg(2+) in drinking water by EPA. Moreover, the peptidyl chemosensor penetrated live cells and detected intracellular Hg(2+) ions by the turn-on response.

Lipid-enveloped zinc phosphate hybrid nanoparticles for codelivery of H-2K(b) and H-2D(b)-restricted antigenic peptides and monophosphoryl lipid A to induce antitumor immunity against melanoma

Nanoimmunotherapy, the application of nanotechnology for sustained and targeted delivery of antigens to dendritic cells (DCs), has attracted much attention in stimulating antigen-specific immune response for antitumor therapy. In order to in situ deliver antigens to DCs for efficient antigen presentation and subsequent induction of strong cytotoxic T lymphocytes (CTL) response, here we developed a multi-peptide (TRP2180-188 and HGP10025-33) and toll-like receptor 4 agonist (monophosphoryl lipid A) codelivery system based on lipid-coated zinc phosphate hybrid nanoparticles (LZnP NPs). This delivery system equips with the chelating property of zinc to realize the high encapsulation efficiency with antigenic peptides and the influence on immune system with adjuvant-like feature. The combination of H-2K(b) and H-2D(b)-restricted peptides could provide multiple epitopes as the target of specific MHC alleles, making tumor more difficult to escape from the surveillance of immune system. The formulated LZnP nano-vaccine with the size of 30nm and outer leaflet lipid exhibited antitumor immunity as the secretion of cytokines in vitro and increased CD8(+) T cell response from IFN-γ ELISPOT analysis ex vivo. The antitumor effects were further evidenced from the prophylactic, therapeutic and metastatic melanoma tumor models compared with free antigens and single peptide-loaded nano-vaccines. These results validate the benefit of LZnP-based vaccine for antitumor immunity and indicate that co-delivery of tumor antigens along with adjuvant may be an optimized strategy for tumor immunotherapy.

A novel fluorescent chemosensor based on tetra-peptides for detecting zinc ions in aqueous solutions and live cells

A novel fluorescent chemosensor (HL) based on tetra-peptides conjugated with dansyl groups has been designed and synthesized, which is a promising analytical tool for detecting Zn²⁺ in aqueous solutions and live cells.

Highly selective ratiometric peptide-based chemosensors for zinc ions and applications in living cell imaging: a study for reasonable structure design

The relationship between the structure and activity for the fluorescent sensing of zinc ions with H₂L peptides has been studied experimentally and computationally.

Fluorescence “on–off–on” peptide-based chemosensor for the selective detection of Cu2+ and S2− and its application in living cell bioimaging

A novel fluorescence chemosensor L based on a tetra-peptide conjugated with dansyl groups has been designed as a promising analytical tool for detecting Cu²⁺ and S²⁻ in 100% aqueous solutions and living cells.

A peptide-based fluorescent chemosensor for measuring cadmium ions in aqueous solutions and live cells

A novel peptide fluorescent chemosensor (H2L) with a lysine backbone and both -NH2 sites conjugated with cysteine and dansyl groups has been designed and synthesized by solid phase peptide synthesis with Fmoc chemistry. This chemosensor is a promising analytical tool for detecting Cd(2+) based on the photo-induced electron transfer (PET) effect by turn-on response in 100% aqueous solutions. As designed, H2L exhibits excellent cell permeation and low biotoxicity as well as displaying relatively high selectivity and sensitivity. The chemosensor penetrated live HeLa cells and detected intracellular Cd(2+) by turn-on response. The binding stoichiometry and affinity, interference test, pH sensitivity, fluorescence quantum yield, quantum mechanical calculations, lifetimes, and cytotoxicity of the chemosensor H2L to Cd(2+) were also investigated. Moreover, H2L exhibits low biotoxicity with a limit of detection (LOD) for Cd(2+) of about 52 nM, implying that H2L can be used as a highly selective and sensitive peptide fluorescent chemosensor in biological systems.

1,8-Naphthyridine-based molecular clips for off–on fluorescence sensing of Zn2+ in living cells

New 1,8-naphthyridine-based clip-like receptor as “off–on” fluorescent probe was designed and synthesised for selectively sensing Zn²⁺ in living cells.