Effectively promoting wound healing with cellulose/gelatin sponges constructed directly from a cellulose solution

CSMP: A Self-Assembled Plant Polysaccharide-Based Hydrofilm for Enhanced Wound Healing

Wound management remains a critical healthcare issue due to the rising incidence of chronic diseases leading to persistent wounds. Traditional dressings have their limitations, such as potential for further damage during changing and suboptimal healing conditions. Recently, hydrogel-based dressings have gained attention due to their biocompatibility, biodegradability, and ability to fill wounds. Particularly, polysaccharide-based hydrogels have shown potential in various medical applications. This study focuses on the development of a novel hydrofilm wound dressing produced from a blend of chia seed mucilage (CSM) and polyvinyl alcohol (PVA), termed CSMP. While the individual properties of CSM and PVA are well-documented, their combined potential in wound management is largely unexplored. CSMP, coupled with sorbitol and glycerin, and cross-linked using ultraviolet light, results in a flexible, adhesive, and biocompatible hydrofilm demonstrating superior water absorption, moisturizing, and antibacterial properties. This hydrofilm promotes epithelial cell migration, enhanced collagen production, and outperforms existing commercial dressings in animal tests. The innovative CSMP hydrofilm offers a promising, cost-effective approach for improved wound care, bridging existing gaps in dressing performance and preparation simplicity. Future research can unlock further applications of such polysaccharide-based hydrofilm dressings.

Tannic acid adsorption properties of cellulose nanocrystalline/fish swim bladder gelatin composite sponge

Foods and beverages with excessive tannins acid (TA) content taste astringent and bitter. The overconsumption of TA could result in nutritional and digestive problems. In this study, the cellulose nanocrystals (CNC)/fish swim bladder gelatin (FG) composite sponge was prepared with glutaraldehyde as a crosslinking agent. The TA adsorption performance of the sponge was discussed. The freeze-dried CNC/FG composite sponge had a porous network structure. CNC was combined into the FG matrix as a reinforcing phase. The mechanical strength, thermal stability, and swelling properties of the composite sponge were improved with the addition of an appropriate amount of CNC. Although CNC decreased the porosity of composite sponge, the increase in active adsorption sites resulted in an overall positive effect on its TA adsorption properties. Under the optimal adsorption conditions, the TA removal rate of 1.0 % CNC composites reached 80.4 %. Furthermore, the sponge retained a TA removal rate of 54 % after five cycles of adsorption and desorption using 50 % ethanol. The results demonstrated that CNC/FG composite sponge has application potential in the field of adsorption materials for TA.

A novel efficient wet process for preparing cross-linked starch: Impact of urea on cross-linking performance

Although wet processes are promising for preparing cross-linked starch, they are currently challenged by lower cross-linking efficiency and the requirement of large amounts of salts. Herein, an efficient and greener wet process was proposed, in which the cross-linking performance between sodium hexametaphosphate (SHMP) and starch was enhanced with the aid of urea. The maximum degree of substitution (DS) of the urea-phosphorylated cross-linked starch (UPCS) was 0.040 at 35 °C, while that of the conventional phosphorylated cross-linked starch (CPCS) was 0.031 at 45 °C. Compared with CPCS, the maximum DS of UPCS was elevated by 29.03 %, but its optimum cross-linking temperature was reduced by 10 °C, indicating that the cross-linking efficiency of this novel wet process was greatly improved by urea. The structural difference between UPCS and CPCS was confirmed by using a series of techniques including 31P NMR and 13C NMR. Zeta potential results suggested that urea may promote starch cross-linking by preventing the closure of active sites through hydrophobic interactions. Due to the structural reinforcement of starch by urea, UPCS showed better thermal stability, water resistance, acid and alkali resistance, and steady shear tolerance properties. This study provides a facile wet process for the fabrication and application of cross-linked starch materials.

Antimicrobial and anti-biofilm activities of bio-inspired nanomaterials for wound healing applications

Chronic wounds are ubiquitously inhabited by bacteria, and they remain a challenge as they cause significant discomfort and because their treatment consumes huge clinical resources. To reduce the burden that chronic wounds place upon both patients and health services, a wide variety of approaches have been devised and investigated. Bioinspired nanomaterials have shown great success in wound healing when compared to existing approaches, showing better ability to mimic natural extracellular matrix (ECM) components and thus to promote cell adhesion, proliferation, and differentiation. Wound dressings that are based on bioinspired nanomaterials can be engineered to promote anti-inflammatory mechanisms and to inhibit the formation of microbial biofilms. We consider the extensive potential of bioinspired nanomaterials in wound healing, revealing a scope beyond that covered previously.

Bibliometric analysis of the use of calcium alginate for wound dressing applications: A review

Wounds can cause many disorders and affect the quality of health, so it is necessary to develop wound dressings that have a role in accelerating the healing process. Wound dressings have evolved over time, and today there are many types of wound dressings that can suit the type of wound the patient has. This review discusses the development, types, and research directions of wound dressings from calcium alginate (CaAlg), using bibliometric analysis with time intervals from 1982 to 2021. It was found that, in the late 1990s, research related to this matter began to increase. United Kingdom, United States, China, Japan, and Italy are the five most influential countries. And from the results of the keyword analysis, it was found that, in addition to studying the general properties of wound dressings, currently there are many developments related to the structure of the material as well as the effect of adding drugs to wound dressings, so that the current study also displays various characterizations.

Multifunctional hydrogels for wound dressings using xanthan gum and polyacrylamide

Developing advanced dressings that integrate multiple functions is one of the major challenges in current clinical wound treatment. In this study, Xanthan gum (XG) and polyacrylamide (PAAm) materials were used to prepare hydrogel dressings by one-pot method. With the combination of the PAAm network and the XG network, the PAAm-XG hydrogels showed the tensile strength of 0.36 MPa and the stretchability as large as 2078 %. The prepared PAAm-XG hydrogels had excellent water uptake efficiency with the swelling ratio of 1200 %. Besides, the developed dressings possessed outstanding biocompatibility, universal adhesion and self-healing ability. More importantly, the PAAm-XG hydrogels can be successfully loaded with Cefixime and human recombinant epidermal growth factor, and these loaded hydrogels released these bioactive molecules in sustained ways. As a result, both E. coli and S. aureus bacteria were inactivated after contacting with the Cefixime-loaded hydrogels for 24 h. Furthermore, in vivo data demonstrated that the PAAm-XG hydrogel dressings significantly accelerated the wound healing in a mouse model. All of these indicate that the multifunctional PAAm-XG hydrogels are promising candidates for wound treatment.

Development of antibacterial and superabsorbent wound composite sponges containing carboxymethyl cellulose/gelatin/Cu-doped ZnO nanoparticles

This study aimed to develop a novel antibacterial and superabsorbent dressing by introducing the Cu-doped ZnO nanoparticles into the carboxymethyl cellulose/gelatin glutaraldehyde-crosslinked composite sponge that is fabricated by lyophilization method. Undoped and Cu-doped ZnO (Zn_1-xCu_xO, x = 0.03 and 0.05) nanoparticles were synthesized through the stabilizing agent-used precipitation process and characterized by XRD, FESEM, FTIR, and ICP-OES techniques. The XRD evaluation determined that the concentration of copper in ZnO is limited to below 5%. Additionally, The ICP-OES analysis confirmed the effect of the doping process on the ZnO crystalline structure by releasing more zinc and copper ions from Cu-doped ZnO, which resulted to improve antibacterial activity against Staphylococcus aureus and Escherichia coli bacterial strains. The effect of ZnO nanoparticles on the physical and mechanical performance of the optimized composite sponge indicated that the incorporation of 3 wt% ZnO nanoparticles produces a well-interconnected porous structure (~156 µm) with high water absorption (~3089%) and proper elongation (~49%) in a wet medium. The incorporation of Cu-doped ZnO nanoparticles enhanced antibacterial potential of the composite sponge. Meanwhile, all sponge groups are safe for viability, proliferation and adhesion of human dermal fibroblast cells. Overall, the obtained data has proved the potential of carboxymethyl cellulose/gelatin/Cu-doped ZnO dressing as a promising candidate for managing infected wounds.

Biomaterials and biotechnology for periodontal tissue regeneration: Recent advances and perspectives

Periodontal tissues are organized in a complex three-dimensional (3D) architecture, including the alveolar bone, cementum, and a highly aligned periodontal ligament (PDL). Regeneration is difficult due to the complex structure of these tissues. Currently, materials are developing rapidly, among which synthetic polymers and hydrogels have extensive applications. Moreover, techniques have made a spurt of progress. By applying guided tissue regeneration (GTR) to hydrogels and cell sheets and using 3D printing, a scaffold with an elaborate biomimetic structure can be constructed to guide the orientation of fibers. The incorporation of cells and biotic factors improves regeneration. Nevertheless, the current studies lack long-term effect tracking, clinical research, and in-depth mechanistic research. In summary, periodontal tissue engineering still has considerable room for development. The development of materials and techniques and an in-depth study of the mechanism will provide an impetus for periodontal regeneration.

Antibacterial biomaterials for skin wound dressing

Bacterial infection and the ever-increasing bacterial resistance have imposed severe threat to human health. And bacterial contamination could significantly menace the wound healing process. Considering the sophisticated wound healing process, novel strategies for skin tissue engineering are focused on the integration of bioactive ingredients, antibacterial agents included, into biomaterials with different morphologies to improve cell behaviors and promote wound healing. However, a comprehensive review on anti-bacterial wound dressing to enhance wound healing has not been reported. In this review, various antibacterial biomaterials as wound dressings will be discussed. Different kinds of antibacterial agents, including antibiotics, nanoparticles (metal and metallic oxides, light-induced antibacterial agents), cationic organic agents, and others, and their recent advances are summarized. Biomaterial selection and fabrication of biomaterials with different structures and forms, including films, hydrogel, electrospun nanofibers, sponge, foam and three-dimension (3D) printed scaffold for skin regeneration, are elaborated discussed. Current challenges and the future perspectives are presented in this multidisciplinary field. We envision that this review will provide a general insight to the elegant design and further refinement of wound dressing.

Ultrasound-assisted synthesis of MIL-88(Fe) coordinated to carboxymethyl cellulose fibers: A safe carrier for highly sustained release of tetracycline

For stopping long-time harmful bacterial infection, designing a drug carrier with a highly prolonged release profile is a promising approach that is of interest to different biomedical areas. The subject of this work is to synthesis a novel carrier system through coordination of MIL-88(Fe) to carboxymethyl cellulose (CMC) for enhancing interaction between drug and carrier. We established an ultrasound-assisted synthetic method for in situ synthesis of MIL-88(Fe) in the presence of CMC resulting in CMC/MIL-88(Fe) composite. The CMC/MIL-88(Fe) was loaded with a high amount of Tetracycline (TC) by immersion of carrier to the TC aqueous solution. The release profile in the simulated physiological conditions, pH 7.4, revealed a low initial burst release followed by a sustained and prolonged release over 384 h. The in vitro cytotoxicity of CMC/MIL-88(Fe) against Human skin fibroblast (HFF-1) cells was calculated by MTT assay and showed a good cytocompatibility. The antibacterial activity was found for TC-loaded CMC/MIL-88(Fe) toward both E. coli and S. aureus with MIC 64 mg·ml^-1.

Conductive Materials for Healing Wounds: Their Incorporation in Electroactive Wound Dressings, Characterization, and Perspectives

The use of conductive materials to promote the activity of electrically responsive cells is an effective means of accelerating wound healing. This article focuses on recent advancements in conductive materials, with emphasis on overviewing their incorporation with non-conducting polymers to fabricate electroactive wound dressings. The characteristics of these electroactive dressings are deliberated, and the mechanisms on how they accelerate the wound healing process are discussed. Potential directions for the future development of electroactive wound dressings and their potential in monitoring the course of wound healing in vivo concomitantly are also proposed.

Novel multifunctional adenine-modified chitosan dressings for promoting wound healing

Wound healing is a dynamic and intricate process, and newly dressings are urgently needed to promote wound healing over the multiple stages. Herein, two water-soluble adenine-modified chitosan (CS-A) derivatives were synthesized in aqueous solutions and freeze-dried to obtain porous sponge-like dressings. The novel derivatives displayed antibacterial activities against S. aureus and E. coli. Moreover, CS-A derivatives demonstrated excellent hemocompatibility and cytocompatibility, as well as promoted the proliferation of the wound cells by shortening the G1 phase and improving DNA duplication efficiency. The ability of CS-A sponges to promote wound healing was studied in a full-thickness skin defect model. The histological analysis and immunohistochemical staining showed that the wounds treated with CS-A sponges displayed fewer inflammatory cells, and faster regeneration of epithelial tissue, collagen deposition and neovascularization. Therefore, CS-A derivatives have potential application in wound dressings and provide new ideas for the design of multifunctional biomaterials.

Alginate-gum acacia based sponges as potential wound dressings for exuding and bleeding wounds

The improper management of wound exudates can expose the wound to bacterial invasion, skin maceration etc. thereby resulting in prolonged wound healing. Biopolymers are characterized by hydrophilic functional groups which when employed for the development of wound dressings promote the wound dressings capability to absorb a high amount of wound exudates. Alginate-gum acacia sponges were prepared from a combination of biopolymers such as sodium alginate and gum acacia in varying amounts with carbopol via crosslinking with 1 and 2% CaCl₂. The prepared sponges were loaded with a combination of ampicillin and norfloxacin. In vitro antibacterial analysis revealed that the antibacterial activity of the loaded antibiotics was retained and the sponges were effective against gram-positive and gram-negative bacteria. The sponges displayed rapid and high absorption capability in the range of 1022-2419% at pH 5.5 simulating wound exudates, and 2268-5042% at pH 7.4 simulating blood within a period of 1-3 h. Furthermore, the whole blood clotting studies further revealed low absorbance values when compared to the control revealing the good clotting capability of the sponges. The unique features of the sponges revealed their potential application for the management of infected, high exuding and bleeding wounds.

Thymine-modified chitosan with broad-spectrum antimicrobial activities for wound healing

Avoiding wound infections is a major challenge in wound care management, and new materials are urgently needed to address these problems. Herein, four water-soluble thymine-modified chitosan (TC) derivatives with the degree of substitution (DS) ranging from 0.23 to 0.62 were synthesized and freeze-dried to obtain porous sponge dressings. TC derivatives had broad-spectrum antibacterial activities against gram-negative bacteria, gram-positive bacteria, fungi, drug-resistance bacteria, Pseudomonas aeruginosa and Acinetobacter baumannii. Especially, the antioxidant and antibacterial properties of TC derivatives increased with increasing DS. Furthermore, TC derivatives showed excellent biocompatibility and blood compatibility. TC sponges could significantly accelerate the wound healing process than gauze and chitosan sponge. The histological analysis and immunohistochemical staining showed that the wounds treated with TC sponges displayed fewer inflammatory cells, and faster regeneration of epithelial tissue, collagen deposition and new blood vessel formation speed. Therefore, TC sponges can shed new light for wound dressing design.

Fabricating poly(vinyl alcohol)/gelatin composite sponges with high absorbency and water-triggered expansion for noncompressible hemorrhage and wound healing

Composite sponges obtained from PVA and gelatin were synthesized by thiol–ene chemistry and used for controlling noncompressible hemorrhage.

Recent Advances in Porous 3D Cellulose Aerogels for Tissue Engineering Applications: A Review

Current approaches in developing porous 3D scaffolds face various challenges, such as failure of mimicking extracellular matrix (ECM) native building blocks, non-sustainable scaffold fabrication techniques, and lack of functionality. Polysaccharides and proteins are sustainable, inexpensive, biodegradable, and biocompatible, with structural similarities to the ECM. As a result, 3D-structured cellulose (e.g., cellulose nanofibrils, nanocrystals and bacterial nanocellulose)-based aerogels with high porosity and interconnected pores are ideal materials for biomedical applications. Such 3D scaffolds can be prepared using a green, scalable, and cost-effective freeze-drying technique. The physicochemical, mechanical, and biological characteristics of the cellulose can be improved by incorporation of proteins and other polysaccharides. This review will focus on recent developments related to the cellulose-based 3D aerogels prepared by sustainable freeze-drying methods for tissue engineering applications. We will also provide an overview of the scaffold development criteria; parameters that influenced the aerogel production by freeze-drying; and in vitro and in vivo studies of the cellulose-based porous 3D aerogel scaffolds. These efforts could potentially help to expand the role of cellulose-based 3D scaffolds as next-generation biomaterials.

Preparation and Properties of Microcrystalline Cellulose/Fish Gelatin Composite Film

As a natural macromolecule-based biomaterial, fish gelatin is used in medical materials for its low pathogen infection risk. However, because of poor mechanical properties, its application has been limited. In this study, microcrystalline cellulose-reinforced fish gelatin (FG/MCC) composite films were prepared with a biological cross-linking agent (genipin) under ultrasonic treatment. SEM micrographs showed that the smooth microstructure of FG film became increasingly disordered with the addition of MCC. The infrared spectrum analysis (FTIR) demonstrated the existence of hydrogen bond interaction between MCC and FG. Compared with the pure FG film, the tensile strength (TS) and modulus of elasticity (MOE) of composite films with MCC were improved, and the elongation at break (EAB) and swelling ratios (SR) were decreased. Ultrasonic treatment could further improve TS, MOE, and SR. When the composite film was prepared with 15% MCC and treated with ultrasound, the TS and MOE increased by 115% and 227%, respectively, while the EAB decreased by 35% and the SR decreased by 4% in comparison with pure FG films. Thermo-gravimetric analysis (TGA) showed that the FG/MCC composite films were stable below 100 °C. The above results indicate that the FG/MCC films have optimistic application prospects in the biomedical field.

In-situ crosslinked hydrogel based on amidated pectin/oxidized chitosan as potential wound dressing for skin repairing

Hydrogel can provide a favorable moisture environment for skin wound healing. In this study, a novel in-situ crosslinked injectable hydrogel was prepared using the water-soluble amidated pectin (AP) and oxidized chitosan (OC) through Schiff-base reaction without any chemical crosslinker. The influence of AP content on the properties of the hydrogel was systemically investigated. It showed that gelation time, pore structure, swelling capability and degradability of the hydrogel can be tuned by varying the content of amine and aldehyde groups from AP and OC. All the porous hydrogels with various AP contents (65%, 70%, and 80%) presented desirable gelation time, swelling property, high hemocompatibility and biocompatibility. Particularly, AP-OC-65 hydrogel presented superior swelling capability and better hemo- and bio-compatibility, owing to more residual amine sites in the hydrogel. Therefore, the injectable AP-OC-65 hydrogel has a greater potential for application to wound dressing or skin substitute.

The potential use of curcumin-β-cyclodextrin inclusion complex/chitosan-loaded cellulose sponges for the treatment of chronic wound

In this research, the cellulose sponges with curcumin-β-cyclodextrin inclusion complex (CMx) and chitosan (CS) were fabricated for use as wound dressings. 1-Allyl-3-methylimidazolium chloride (AMIMCl) ionic liquid as a green solvent was used for the fabrication of cellulose sponges. Due to the low aqueous solubility and low bioavailability of curcumin, cyclodextrins (CDs) were applied and complexed with curcumin to obtain CMx. In addition, CS was incorporated in the cellulose sponges to improve the antibacterial activity of sponges. Attenuated total reflection-Fourier transform infrared (ATR-FTIR) analysis, morphological appearances, mechanical properties, water retention and weight loss, release behaviors, antibacterial activity, indirect cytotoxicity, cell attachment, and cell proliferation of the CMx/CS-loaded cellulose sponges were investigated. From the results, the cellulose sponges showed a porous structure. The incorporation of CMx and CS improved the mechanical properties when compared to the neat cellulose sponges. Moreover, the addition of CS into the cellulose sponges exhibited antibacterial activity against E. coli and S. aureus. Furthermore, the indirect cytotoxicity of the CMx/CS-loaded cellulose sponges was non-toxic and compatible with NCTC L929 and NHDF cells. Consequently, the CMx/CS-loaded cellulose sponges might be good candidates for use as wound dressing materials for the treatment of wound, especially chronic wound.

Morphology-controllable cellulose/chitosan sponge for deep wound hemostasis with surfactant and pore-foaming agent

Developing a facile and scalable synthetic route is important to explore the potential application of functional cellulose sponges. Here, a simple and efficient strategy to produce porous and hydrophilic cellulose sponges using surfactant and pore-foaming agent is demonstrated. The obtained cellulose sponges exhibit high water absorption capacity and rapid shape recoverability. The introduction of chitosan endows the chitosan/cellulose composite sponge with good mechanical properties. Inhibitory effects on Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa are particularly proved. Besides, the result of the dynamic whole blood clotting time indicated that the chitosan/cellulose composite sponge has better coagulation ability than those of traditional gauze and gelatin sponge. Animal experiment further showed that rapid hemostasis within 105 s could be reached with the composite sponge. Good biocompatibility of the composite sponge is proved by the results of hemocompatibility and cytotoxicity, indicating an excellent candidate as a rapid hemostatic material.

Bacterial nanocellulose as a corneal bandage material: a comparison with amniotic membrane

Corneal trauma and ulcerations are leading causes of corneal blindness around the world. These lesions require attentive medical monitoring since improper healing or infection has serious consequences in vision and quality of life. Amniotic membrane grafts represent the common solution to treat severe corneal wounds. However, amniotic membrane's availability remains limited by the dependency on donor tissues, its high price and short shelf life. Consequently, there is an active quest for biomaterials to treat injured corneal tissues. Nanocellulose synthetized by bacteria (BNC) is an emergent biopolymer with vast clinical potential for skin tissue regeneration. BNC also exhibits appealing characteristics to act as an alternative corneal bandage such as; high liquid holding capacity, biocompatibility, flexibility, natural - but animal free-origin and a myriad of functionalization opportunities. Here, we present an initial study aiming at testing the suitability of BNC as corneal bandage regarding preclinical requirements and using amniotic membrane as a benchmark. Bacterial nanocellulose exhibits higher mechanical resistance to sutures and slightly longer stability under in vitro and ex vivo simulated physiological conditions than amniotic membrane. Additionally, bacterial nanocellulose offers good conformability to the shape of the eye globe and easy manipulation in medical settings. These excellent attributes accompanied by the facts that bacterial nanocellulose is stable at room temperature for long periods, can be heat-sterilized and is easy to produce, reinforce the potential of bacterial nanocellulose as a more accessible ocular surface bandage.

Preparation of complex microcapsules of soluble polysaccharide from Glycyrrhiza uralensis and its application in wound repair and scar inhibition

The extraction process of Glycyrrhiza soluble polysaccharide (GP) was optimized by RSM, a rat trauma model was established via longitudinal incision on the back skin. The effects of GP combined with microcapsule collagen on the repair of rat injury model were discussed at different levels, Based on the content of hydroxyproline at the whole animal level, the proliferation of granulation tissue stained by HE, the number of microvessels labeled by CD34, the production of collagen fibers stained by Masson, the level of phosphorylation of STAT3 protein and that of VEGF at protein level were investigated. The results showed that after the administration of GP combined with microcapsules, the content of hydroxyproline in granulation tissue increased, the proliferation of capillaries and fibroblasts in granulation tissue became active, and the number of microvessels in wound increased. The formation density of collagen fibers was uniform and orderly. GP combined with microcapsules could activate the expression of p-STAT3 and VEGF proteins and up-regulate the transcription level of VEGF mRNA and miRNA-21 genes. Furthermore, GP combined with microcapsules could accelerate wound healing and promote neovascularization.

Shape memory histocompatible and biodegradable sponges for subcutaneous defect filling and repair: greatly reducing surgical incision

Reducing surgical incision for large area subcutaneous defect filling and repair is a great challenge in the biomedical field, especially for plastic surgery. In this study, a novel hydroxyethyl cellulose/soy protein isolate (HEC/SPI) composite sponge (EHSS) with a fluid responsive shape memory property was constructed, whose thickness could be controlled by hot-pressing conditions to reduce the required surgical incision greatly. Effects of the main factors such as pressure, temperature and hot-pressing cycles on the recovery degree of EHSS were investigated systematically. The structure and physical properties of the sponges were characterized by FTIR spectroscopy, XRD, SEM etc. The results showed that EHSS could be pressed into thin disks with much smaller thickness, and the thickness retention ratio and recovery ratio were affected by hot-pressing conditions such as pressure and temperature. Especially, EHSS could be hot-pressed into a dense thin disk (EHSS-PT-130) at 130 °C with the pressure of 30 MPa, which could quickly recover its original shape by soaking in hydrophilic fluids. EHSS-PT-130 also exhibited good hydrophilicity, cytocompatibility, histocompatibility and in vivo biodegradability. Compared with the original EHSS, in vivo shape memory EHSS-PT-130 required much smaller surgical incision to reach the same repair effect and no need of extra sterilization, showing potential application for subcutaneous defect filling and repair.

Bioprinting of a Cell-Laden Conductive Hydrogel Composite

Bioprinting has gained significant attention for creating biomimetic tissue constructs with potential to be used in biomedical applications such as drug screening or regenerative medicine. Ideally, biomaterials used for three-dimensional (3D) bioprinting should match the mechanical, hydrostatic, bioelectric, and physicochemical properties of the native tissues. However, many materials with these tissue-like properties are not compatible with printing techniques without modifying their compositions. In addition, integration of cell-laden biomaterials with bioprinting methodologies that preserve their physicochemical properties remains a challenge. In this work, a biocompatible conductive hydrogel composed of gelatin methacryloyl (GelMA) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) was synthesized and bioprinted to form complex, 3D cell-laden structures. The biofabricated conductive hydrogels were formed by an initial cross-linking step of the PEDOT:PSS with bivalent calcium ions and a secondary photopolymerization step with visible light to cross-link the GelMA component. These modifications enabled tuning the mechanical properties of the hydrogels, with Young's moduli ranging from ∼40-150 kPa, as well as tunable conductivity by varying the concentration of PEDOT:PSS. In addition, the hydrogels degraded in vivo with no substantial inflammatory responses as demonstrated by haematoxylin and eosin (H&E) and immunofluorescent staining of subcutaneously implanted samples in Wistar rats. The parameters for forming a slurry of microgel particles to support 3D bioprinting of the engineered cell-laden hydrogel were optimized to form constructs with improved resolution. High cytocompatibility and cell spreading were demonstrated in both wet-spinning and 3D bioprinting of cell-laden hydrogels with the new conductive hydrogel-based bioink and printing methodology. The synergy of an advanced fabrication method and conductive hydrogel presented here is promising for engineering complex conductive and cell-laden structures.

Electrospun Gelatin Fibers Surface Loaded ZnO Particles as a Potential Biodegradable Antibacterial Wound Dressing

Traditional wound dressings require frequent replacement, are prone to bacterial growth and cause a lot of environmental pollution. Therefore, biodegradable and antibacterial dressings are eagerly desired. In this paper, gelatin/ZnO fibers were first prepared by side-by-side electrospinning for potential wound dressing materials. The morphology, composition, cytotoxicity and antibacterial activity were characterized by using Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), particle size analyzer (DLS), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), thermogravimetry (TGA) and Incucyte™ Zoom system. The results show that ZnO particles are uniformly dispersed on the surface of gelatin fibers and have no cytotoxicity. In addition, the gelatin/ZnO fibers exhibit excellent antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) with a significant reduction of bacteria to more than 90%. Therefore, such a biodegradable, nontoxic and antibacterial fiber has excellent application prospects in wound dressing.

Gelatin-polysaccharide composite scaffolds for 3D cell culture and tissue engineering: Towards natural therapeutics

Gelatin is a promising material as scaffold with therapeutic and regenerative characteristics due to its chemical similarities to the extracellular matrix (ECM) in the native tissues, biocompatibility, biodegradability, low antigenicity, cost-effectiveness, abundance, and accessible functional groups that allow facile chemical modifications with other biomaterials or biomolecules. Despite the advantages of gelatin, poor mechanical properties, sensitivity to enzymatic degradation, high viscosity, and reduced solubility in concentrated aqueous media have limited its applications and encouraged the development of gelatin-based composite hydrogels. The drawbacks of gelatin may be surmounted by synergistically combining it with a wide range of polysaccharides. The addition of polysaccharides to gelatin is advantageous in mimicking the ECM, which largely contains proteoglycans or glycoproteins. Moreover, gelatin-polysaccharide biomaterials benefit from mechanical resilience, high stability, low thermal expansion, improved hydrophilicity, biocompatibility, antimicrobial and anti-inflammatory properties, and wound healing potential. Here, we discuss how combining gelatin and polysaccharides provides a promising approach for developing superior therapeutic biomaterials. We review gelatin-polysaccharides scaffolds and their applications in cell culture and tissue engineering, providing an outlook for the future of this family of biomaterials as advanced natural therapeutics.

Self-adhesive photothermal hydrogel films for solar-light assisted wound healing

Self-adhesive photothermal hydrogel films can adhere to skin wound and convert solar light into heat, warming up the wound locally and promoting wound repair.

Facile preparation of polysaccharide-based sponges and their potential application in wound dressing

A cellulose–chitosan hybrid sponge incorporating sustainability, desired functionality and stability was used as a wound dressing.

Deformation Drives Alignment of Nanofibers in Framework for Inducing Anisotropic Cellulose Hydrogels with High Toughness

Deformation-driven alignment of macromolecules or nanofibers leading to anisotropy is a challenge in functional soft materials. Here, tough cellulose hydrogels that exhibited deformation-induced anisotropy are fabricated by reacting cellulose with a small amount of epichlorohydrin (EPI) in LiOH/urea solution and subsequent treating with dilute acid. The loosely cross-linked network that was obtained via chemical cross-linking of cellulose with EPI as a large framework maintained the elasticity of hydrogels, whereas nanofibers produced by the acid treatment formed physical cross-linked networks through hydrogen bonds which could efficiently dissipated mechanical energy. Meanwhile, the nanofibers could further aggregate to form submicrobundles and participate in the formation of frameworks during the acid treatment. Under deformation, the nanofibers and submicrobundles in the physical networks synchronize easily to align with the large framework, generating the rapidly responsive birefringence behaviors with highly stable colors. Thus, the cellulose hydrogels possessing sensitively mechano-responsive behavior could be utilized as a dynamic light switch and a soft sensor to accurately detect small external force, respectively. This work opens a novel pathway to construct tough and mechanoresponsive hydrogels via a green conversion of natural polysaccharide.

A novel in situ silver/hyaluronan bio-nanocomposite fabrics for wound and chronic ulcer dressing: In vitro and in vivo evaluations

In-situ formed hyaluronan/silver (HA/Ag) nanoparticles (NPs) were used to prepare composite fibers/fabrics for the first time. Different concentrations of silver nitrate (1, 2mg/100ml) were added at ambient temperature to sodium hyaluronate solution (40mg/ml), then the pH was increased to 8 by adding sodium hydroxide. The in-situ formed HA/Ag-NPs were used to prepare fibers/nonwoven fabrics by wet-dry-spinning technique (WDST). UV/vis spectroscopy, SEM, TEM, DLS, XPS, XRD and TGA were employed to characterize the structure and composition of the nanocomposite, surface morphology of fiber/fabrics, particle size of Ag-NPs, chemical interactions of Ag⁰ and HA functional groups, crystallinity and thermal stability of the wound dressing, respectively. The resultant HA/Ag-NPs1 and HA/Ag-NPs2 composite showed uniformly dispersed throughout HA fiber/fabrics (SEM), an excellent distribution of Ag-NPs with 25±2, nm size (TEM, DLS) and acceptable mechanical properties. The XRD analysis showed that the in-situ preparation of Ag-NPs increased the crystallinity of the resultant fabrics as well as the thermal stability. The antibacterial performance of medical HA/Ag-NPs fabrics was evaluated against gram negative bacteria E. coli K12, exhibiting significant bactericidal activity. The fibers did not show any cytotoxicity against human keratinocyte cell line (HaCaT). In-vivo animal tests indicated that the prepared wound dressing has strong healing efficacy (non-diabetics/diabetics rat model) compared to the plain HA fabrics and greatly accelerated the healing process. Based on our results, the new HA/Ag-NPs-2mg nonwoven wound dressing fabrics can be used in treating wounds and chronic ulcers as well as cell carrier in different biological research and tissue engineering.

Spongy bilayer dressing composed of chitosan-Ag nanoparticles and chitosan-Bletilla striata polysaccharide for wound healing applications

The purpose of this study was to develop a promising wound dressing. Though chitosan cross-linked with genipin has been widely used as biomaterials, with the addition of partially oxidized Bletilla striata polysaccharide, the newly developed material in this study (coded as CSGB) showed less gelling time, more uniform aperture distribution, higher water retention, demanded mechanical strength and more L929 cell proliferation compared to the chitosan cross-linked only with genipin. Owning to partial blocking of free amino groups of chitosan, CSGB revealed almost no antibacterial activities, thus the bilayer composite of chitosan-silver nanoparticles (CS-AgG) on CSGB was designed to inhibit microbial invasion. The in vivo studies indicated that both CSGB and bilayer wound dressing significantly accelerated the healing rate of cutaneous wounds in mice, and the bilayer exhibited better mature epidermization with less inflammatory cells on Day 7. Therefore, this novel bilayer composite has great potential in wound dressing applications.

Development of nanocellulose scaffolds with tunable structures to support 3D cell culture

Swollen three-dimensional nanocellulose films and their resultant aerogels were prepared as scaffolds towards tissue engineering application. The nanocellulose hydrogels with various swelling degree (up to 500 times) and the resultant aerogels with desired porosity (porosity up to 99.7% and specific surface area up to 308m(2)/g) were prepared by tuning the nanocellulose charge density, the swelling media conditions, and the material processing approach. Representative cell-based assays were applied to assess the material biocompatibility and efficacy of the human extracellular matrix (ECM)-mimicking nanocellulose scaffolds. The effects of charge density and porosity of the scaffolds on the biological tests were investigated for the first time. The results reveal that the nanocellulose scaffolds could promote the survival and proliferation of tumor cells, and enhance the transfection of exogenous DNA into the cells. These results suggest the usefulness of the nanocellulose-based matrices in supporting crucial cellular processes during cell growth and proliferation.

In Situ Synthesis of Antimicrobial Silver Nanoparticles within Antifouling Zwitterionic Hydrogels by Catecholic Redox Chemistry for Wound Healing Application

A multifunctional hydrogel that combines the dual functionality of both antifouling and antimicrobial capacities holds great potential for many bioapplications. Many approaches and different materials have been employed to synthesize such a material. However, a systematic study, including in vitro and in vivo evaluation, on such a material as wound dressings is highly scarce at present. Herein, we report on a new strategy that uses catecholic chemistry to synthesize antimicrobial silver nanoparticles impregnated into antifouling zwitterionic hydrogels. For this purpose, hydrophobic dopamine methacrylamide monomer (DMA) was mixed in an aqueous solution of sodium tetraborate decahydrate and DMA monomer became soluble after increasing pH to 9 due to the complexation between catechol groups and boron. Then, cross-linking polymerization of zwitterionic monomer was carried out with the solution of the protected dopamine monomer to produce a new hydrogel. When this new hydrogel comes in contact with a silver nitrate solution, silver nanoparticles (AgNPs) are formed in its structure as a result of the redox property of the catechol groups and in the absence of any other external reducing agent. The results obtained from TEM and XRD measurements indicate that AgNPs with diameters of around 20 nm had formed within the networks. FESEM images confirmed that the silver nanoparticles were homogeneously incorporated throughout the hydrogel network, and FTIR spectroscopy demonstrated that the catechol moiety in the polymeric backbone of the hydrogel is responsible for the reduction of silver ions into the AgNPs. Finally, the in vitro and in vivo experiments suggest that these mussel-inspired, antifouling, antibacterial hydrogels have great potential for use in wound healing applications.

Epichlorohydrin-Cross-linked Hydroxyethyl Cellulose/Soy Protein Isolate Composite Films as Biocompatible and Biodegradable Implants for Tissue Engineering

A series of epichlorohydrin-cross-linked hydroxyethyl cellulose/soy protein isolate composite films (EHSF) was fabricated from hydroxyethyl cellulose (HEC) and soy protein isolate (SPI) using a process involving blending, cross-linking, solution casting, and evaporation. The films were characterized with FTIR, solid-state (13)C NMR, UV-vis spectroscopy, and mechanical testing. The results indicated that cross-linking interactions occurred in the inter- and intramolecules of HEC and SPI during the fabrication process. The EHSF films exhibited homogeneous structure and relative high light transmittance, indicating there was a certain degree of miscibility between HEC and SPI. The EHSF films exhibited a relative high mechanical strength in humid state and an adjustable water uptake ratio and moisture absorption ratio. Cytocompatibility, hemocompatibility and biodegradability were evaluated by a series of in vitro and in vivo experiments. These results showed that the EHSF films had good biocompatibility, hemocompatibility, and anticoagulant effect. Furthermore, EHSF films could be degraded in vitro and in vivo, and the degradation rate could be controlled by adjusting the SPI content. Hence, EHSF films might have a great potential for use in the biomedical field.

Ambient-temperature fabrication of melamine-based sponges coated with hydrophobic lignin shells by surface dip adsorbing for oil/water separation

The fabrication of hydrophobic MF-based sponges was developed by surface coating with lignin.