8DSS-promoted remineralization of demineralized dentin in vitro

Reinforced dentin remineralization via a novel dual-affinity peptide

OBJECTIVES

In light of the constantly flowing saliva, anti-caries remineralization agents are inclined to be taken away. Owing to their limited residence time, the remineralization effect is not as desirable as expected. Hence, our study aimed to synthesize a novel peptide (DGP) with high affinity to both collagen fibrils and hydroxyapatite, and investigated its dentin remineralization efficacy in vitro and anti-caries capability in vivo.

METHODS

DGP was synthesized through Fmoc solid-phase reaction. The binding ability and interaction mechanism of DGP to demineralized dentin were investigated. Dentin specimens were demineralized, then treated with DGP and deionized water respectively. The specimens were incubated in artificial saliva and in-vitro remineralization effectiveness was analyzed after 14 days. The rat caries model was established to further scrutinize the in-vivo efficacy of caries prevention.

RESULTS

DGP possesses an enhanced adhesion force of 12.29 ± 1.12 nN to demineralized dentin. The favorable adsorption capacity is ascribed to the stable hydrogen bonds between S2P-101 and ASP-100 of DGP and GLY33 and PRO-16 of collagen fibers. Abundant mineral deposits and remarkable tubule occlusion were observed in the DGP group. DGP-treated dentin obtained notable microhardness recovery and higher mineral content after a 14-day remineralization regimen. DGP also demonstrated potent caries prevention in vivo, with substantially fewer carious lesions and significantly lower Keyes scoring.

SIGNIFICANCE

DGP proves to possess a high affinity to demineralized dentin regardless of saliva flowing, thus enhancing remineralization potency significantly in vitro and in vivo, potential for dental caries prevention and combatting initial dentin caries clinically.

Triple Function of Amelogenin Peptide-Chitosan Hydrogel for Dentin Repair

Biomimetic strategies like peptide-guided collagen mineralization promise to enhance the effectiveness of dentin remineralization. We recently reported that rationally designed amelogenin-derived peptides P26 and P32 promoted apatite nucleation, mineralized collagen, and showed potential in enamel regrowth and dentin remineralization. To facilitate the clinical application of amelogenin-derived peptides and to uncover their effectiveness in repairing dentin, we have now implemented a chitosan (CS) hydrogel for peptide delivery and have investigated the effects of P26-CS and P32-CS hydrogels on dentin remineralization using 2 in situ experimental models that exhibited different levels of demineralization. The efficacy of the peptide-CS hydrogels in dentin repair was evaluated by characterizing the microstructure, mineral density, mineral phase, and nanomechanical properties of the remineralized samples. The new strategy of atomic force microscopy PeakForce quantitative nanomechanical mapping was used for direct visualization and nanomechanical analysis of repaired dentin lesions across the lesion depth. Results from the 2 models indicated the potential triple functions of peptide-CS hydrogels for dentin repair: building a highly organized protective mineralized layer on dentin, occluding dentinal tubules by peptide-guided in situ mineralization, and promoting biomimetic dentinal collagen remineralization. Importantly, peptides released from the CS hydrogel could diffuse into the dentinal matrix and penetrate the dentinal tubules, leading to both surface and subsurface remineralization and tubule occlusion. Given our previous findings on peptide-CS hydrogels' potential for remineralizing enamel, we see further promise for hydrogels to treat tooth defects involving multiple hard tissues, as in the case of noncarious cervical lesions.

Research progress of biomimetic materials in oral medicine

Biomimetic materials are able to mimic the structure and functional properties of native tissues especially natural oral tissues. They have attracted growing attention for their potential to achieve configurable and functional reconstruction in oral medicine. Though tremendous progress has been made regarding biomimetic materials, significant challenges still remain in terms of controversy on the mechanism of tooth tissue regeneration, lack of options for manufacturing such materials and insufficiency of in vivo experimental tests in related fields. In this review, the biomimetic materials used in oral medicine are summarized systematically, including tooth defect, tooth loss, periodontal diseases and maxillofacial bone defect. Various theoretical foundations of biomimetic materials research are reviewed, introducing the current and pertinent results. The benefits and limitations of these materials are summed up at the same time. Finally, challenges and potential of this field are discussed. This review provides the framework and support for further research in addition to giving a generally novel and fundamental basis for the utilization of biomimetic materials in the future.

Synergistic effect of ion-releasing fillers on the remineralization and mechanical properties of resin-dentin bonding interfaces

In modern restorative dentistry, adhesive resin materials are vital for achieving minimally invasive, esthetic, and tooth-preserving restorations. However, exposed collagen fibers are found in the hybrid layer of the resin-dentin bonding interface due to incomplete resin penetration. As a result, the hybrid layer is susceptible to attack by internal and external factors such as hydrolysis and enzymatic degradation, and the durability of dentin bonding remains limited. Therefore, efforts have been made to improve the stability of the resin-dentin interface and achieve long-term clinical success. New ion-releasing adhesive resin materials are synthesized by introducing remineralizing ions such as calcium and phosphorus, which continuously release mineral ions into the bonding interface in resin-bonded restorations to achieve dentin biomimetic remineralization and improve bond durability. As an adhesive resin material capable of biomimetic mineralization, maintaining excellent bond strength and restoring the mechanical properties of demineralized dentin is the key to its function. This paper reviews whether ion-releasing dental adhesive materials can maintain the mechanical properties of the resin-dentin bonding interface by supplementing the various active ingredients required for dentin remineralization from three aspects: phosphate, silicate, and bioactive glass.

Effects of Bio-Aging on Mechanical Properties and Microbial Behavior of Different Resin Composites

Under challenging oral environments, the overall performance of resin composites is affected by bio-aging. This study investigated the effects of saliva biofilm-induced bio-aging on the mechanical properties and microbial behavior of composites with different filler types. Microhybrid, nanohybrid, nano-filled and nano-filled flowable composites were bio-aged with saliva biofilm for 30 days. Surface morphology, roughness, mechanical and aesthetic properties were determined. A 48 h saliva biofilm model was used to evaluate the microbial behavior of different composites in vitro. Biofilm metabolic activity, lactic acid production and live/dead bacterial staining were tested. Six volunteers were selected to wear intra-oral appliances with composite slabs for 24 h and biofilms were collected and analyzed using 16S rRNA sequencing to assess the biofilm formation over those materials in situ. Although there were increasing trends, surface roughness, water resorption and material solubility had no significant changes for all groups after bio-aging (p > 0.05). There were no significant changes in elastic modulus for all groups after aging (p > 0.05). However, a decrease in flexural strength in all groups was observed (p < 0.05), except for the nanoflow composite group (p > 0.05). The Vickers hardness remained stable in all groups after aging (p > 0.05), except for the nano-filled group (p < 0.05). The nanoflow composite showed distinct color changes compared to the micro-hybrid group after aging (p < 0.05). Biofilm metabolic activity and lactic acid production in vitro increased slightly after bio-aging in all groups, but with no statistical significance (p > 0.05). The Shannon index diversity of biofilms in situ decreased after aging (p < 0.05), while no significant difference was shown in species composition at the genus level in all groups (p > 0.05). Resin composites with different sized fillers displayed a relatively stable mechanical performance and uncompromised microbial behavior both in vitro and in situ after 30 days of bio-aging. Based on the results, composites with different filler types can be selected flexibly according to clinical needs. However, a longer time for bio-aging is still needed to confirm the mechanical properties and microbial behaviors of composites in the long run.

Remineralization of Dentinal Lesions Using Biomimetic Agents: A Systematic Review and Meta-Analysis

The objective of this article was to systematically provide an up-to-date review on the different methods of remineralizing human dentine using different biomimetic agents. The authors performed a systematic search within PubMed, Scopus, and Web of Science in addition to the grey literature in Google Scholar^® using MeSH terms. The PICO question was P: human teeth dentinal sections; I: application of biomimetic remineralizing agents; C: other non-biomimetic approaches; O: extent of remineralization and physical properties of remineralized dentine. The initially identified studies were screened for titles and abstracts. Non-English articles, reviews, animal studies, studies involving the resin-dentine interface, and other irrelevant articles were then excluded. The other remaining full-text articles were retrieved. Bibliographies of the remaining articles were searched for relevant studies that could be included. A total of 4741 articles were found, and finally, 39 full-text articles were incorporated in the current systematic review. From these, twenty-six research studies used non-collagenous protein (NCP) analogs to biomineralize dentine, six studies used bioactive materials derived from natural sources, six studies used zinc hydroxyapatite, and one study used amelogenin peptide to induce hydroxyapatite formation on the surface of demineralized dentine. Additive effects of triclosan and epigenin were assessed when combined with commonly available NCPs. Overall, a moderate risk of bias was observed and, hence, the findings of the included studies could be acceptable. A meta-analysis of some similar studies was performed to assess the depth of remineralization and elastic modulus. Despite having high heterogeneity (I² > 90), all the studies showed a significant improvement in biomimetic remineralization efficacy as compared to the control. All the included studies carried out a functional remineralization assessment and found a 90-98% efficacy in the extent of remineralization while the elastic modulus reached 88.78 ± 8.35 GPa, which is close to natural dentine. It is pertinent to note the limitations of these studies that have been carried out in vitro under controlled settings, which lack the effects of a natural oral environment. To conclude, the authors suggest that the biomimetic remineralization of dentine using NCP analogs, bioactive materials, and natural products carries significant potential in treating dentinal lesions; however, more long-term studies are needed to assess their clinical applications in vivo.

Remineralization Potential of Three Restorative Glass Ionomer Cements: An In Vitro Study

The aim of this in vitro study was to evaluate the remineralizing ability of three glass ionomers on demineralized dentin with different thicknesses and time periods. Fifty third molars were obtained and were sectioned into 1-, 2-, and 3-mm thick slices (n = 36 for each thickness). The specimens were demineralized with 18% EDTA for 2 h. From the glass ionomer cements (GICs) under study (Ketac Molar Aplicap, Equia Forte, or Riva Light Cure), 1 mm was placed over each slice, set, and preserved in PBS until observation after 1, 7, 14, and 28 days after placement. For each material, thickness, and time, three samples were prepared. Using Fourier Transform Infrared Spectrometry (FTIR), apatite formation was determined on the side opposite to that on which the material had been placed. By means of Energy Dispersive Spectroscopy (EDX), the changes in the Calcium/Phosphate (Ca/P) ratio were evaluated. These changes were compared between the different materials by means of a two-way ANOVA test, considering time and dentin thickness, for a significance level of p < 0.05. Results: FTIR showed a peak at 1420 cm^-1, evidencing the presence of carbonated hydroxyapatite in all the materials after 14 days, which indicates that a remineralization process occurred. Riva Light Cure showed the most homogeneous results at all depths at 28 days. The Ca/P ratio was maximum at 7 days in 2 mm of dentin for Riva Light Cure and Equia Forte HT (3.16 and 3.07; respectively) and for Ketac Molar at 14 days in 1 mm (3.67). All materials induced remineralization. Equia Forte achieved the greatest effect at 2 mm and Ketac Molar at 1 mm, whereas Riva Light Cure showed similar results at all depths. In terms of Ca/P ratio, Equia Forte and Riva Light Cure remineralized best at 2 mm, whereas for Ketac Molar, it was 1 mm. Carbonate apatite formation was higher at 24 h and 7 days for Ketac Molar, whereas it decreased at 14 days for Ketac Molar and peaked in Riva Light Cure and Equia Forte.

Biomimetic mineralization based on self-assembling peptides

Biomimetic science has attracted great interest in the fields of chemistry, biology, materials science, and energy. Biomimetic mineralization is the process of synthesizing inorganic minerals under the control of organic molecules or biomolecules under mild conditions. Peptides are the motifs that constitute proteins, and can self-assemble into various hierarchical structures and show a high affinity for inorganic substances. Therefore, peptides can be used as building blocks for the synthesis of functional biomimetic materials. With the participation of peptides, the morphology, size, and composition of mineralized materials can be controlled precisely. Peptides not only provide well-defined templates for the nucleation and growth of inorganic nanomaterials but also have the potential to confer inorganic nanomaterials with high catalytic efficiency, selectivity, and biotherapeutic functions. In this review, we systematically summarize research progress in the formation mechanism, nanostructural manipulation, and applications of peptide-templated mineralized materials. These can further inspire researchers to design structurally complex and functionalized biomimetic materials with great promising applications.

Advanced materials for enamel remineralization

Dental caries, a chronic and irreversible disease caused by caries-causing bacteria, has been listed as one of the three major human diseases to be prevented and treated. Therefore, it is critical to effectively stop the development of enamel caries. Remineralization treatment can control the progression of caries by inhibiting and reversing enamel demineralization at an early stage. In this process, functional materials guide the deposition of minerals on the damaged enamel, and the structure and hardness of the enamel are then restored. These remineralization materials have great potential for clinical application. In this review, advanced materials for enamel remineralization were briefly summarized, furthermore, an outlook on the perspective of remineralization materials were addressed.

Chlorhexidine-loaded poly (amido amine) dendrimer and a dental adhesive containing amorphous calcium phosphate nanofillers for enhancing bonding durability

OBJECTIVE

A novel method of combining chlorhexidine (CHX) loaded poly (amido amine) (PAMAM) dendrimers with a dental adhesive containing amorphous calcium phosphate (ACP) nanofillers are proposed for etch-and-rinse bonding system to enhance resin-dentin bonding durability.

METHODS

The CHX-loaded PAMAM and ACP nanofillers were synthesized and characterized. Their effects on the cytotoxicity were tested by MTT assay. Micro-tensile bond strength (μTBS) before and after thermomechanical challenges were used to evaluate the bonding durability. Anti-matrix metalloproteinase (MMPs) property was examined using in-situ zymography. A double-fluorescence technique was used to examine interfacial permeability after bonding. Dentin remineralization in Ca/P lacking solution was observed under scanning electron microscopy.

RESULTS

Compared with a 0.2 wt% CHX solution, the PAMAM loaded CHX had less cytotoxicity, while the in situ zymography showed it could still inhibit MMPs activity within the hybrid layer after released from PAMAM. The application of the novel method maintained the μTBS better than the control group after thermomechanical challenges, and it did not negatively affect water permeability of the bonding interfaces. CHX-loaded PAMAM regulated the calcium (Ca) and phosphate (P) ions provided by the ACP-containing adhesives to remineralize the demineralized dentin surfaces without initial Ca/P in the environment.

SIGNIFICANCE

The novel method can reduce the cytotoxicity of CHX, inhibit MMPs activities, maintain μTBS, and induce dentin remineralization, which are crucial factors for enhancing bonding durability.

Advances in biomineralization-inspired materials for hard tissue repair

Biomineralization is the process by which organisms form mineralized tissues with hierarchical structures and excellent properties, including the bones and teeth in vertebrates. The underlying mechanisms and pathways of biomineralization provide inspiration for designing and constructing materials to repair hard tissues. In particular, the formation processes of minerals can be partly replicated by utilizing bioinspired artificial materials to mimic the functions of biomolecules or stabilize intermediate mineral phases involved in biomineralization. Here, we review recent advances in biomineralization-inspired materials developed for hard tissue repair. Biomineralization-inspired materials are categorized into different types based on their specific applications, which include bone repair, dentin remineralization, and enamel remineralization. Finally, the advantages and limitations of these materials are summarized, and several perspectives on future directions are discussed.

Mussel-inspired self-assembly engineered implant coatings for synergistic anti-infection and osteogenesis acceleration

Implant associated infections (IAI) and poor osseointegration are the two major causes for titanium implant failure, leading to subsequent financial burden and physical sufferings. Therefore, advanced implants with excellent anti-infection and osseointegration performance are needed. In this work, mussel-inspired tannic acid (TA) mediated layer-by-layer (LbL) self-assembly was used for fabricating bonded polyethylene glycol (PEG) and 8DSS (8 repeating units of aspartate-serine-serine) coatings (Ti/8DSS/PEG) on the surface of titanium implants. The coating is designed to simultaneously reduce bacterial adhesion through the super-hydrophilic effect of PEG and promote osseointegration through the effective biomineralization of 8DSS. The obtained Ti/8DSS/PEG implant exhibits superior anti-biofouling capabilities (anti-protein adhesion and anti-bacterial adhesion against S. aureus and E. coli) and excellent biocompatibility. Meanwhile, the Ti/8DSS/PEG implant accelerates osteoblast differentiation and presents significantly better osteogenic ability than bare titanium implants in vivo. This mussel-inspired TA mediated LbL self-assembly method is expected to provide a multifunctional and robust platform for surface engineering in bone repair.

Dentin remineralization in acidic solution without initial calcium phosphate ions via poly(amido amine) and calcium phosphate nanocomposites after fluid challenges

OBJECTIVES

A previous study showed that the combination of poly(amido amine) (PAMAM) and rechargeable composites with nanoparticles of amorphous calcium phosphate (NACP) induced dentin remineralization in an acidic solution with no initial calcium (Ca) and phosphate (P) ions, mimicking the oral condition of individuals with dry mouths. However, the frequent fluid challenge in the oral cavity may decrease the remineralization capacity. Therefore, the objective of the present study was to investigate the remineralization efficacy on dentin in an acid solution via PAMAM + NACP after fluid challenges for the first time.

METHODS

The NACP nanocomposite was stored in a pH 4 solution for 77 days to exhaust its Ca and P ions and then recharged. Demineralized dentin samples were divided into four groups: (1) control dentin, (2) dentin coated with PAMAM, (3) dentin with recharged NACP composite, and (4) dentin with PAMAM + recharged NACP. PAMAM-coated dentin was shaken in phosphate-buffered saline for 77 days to desorb PAMAM from dentin. Samples were treated in pH 4 lactic acid with no initial Ca and P ions for 42 days.

RESULTS

After 77 days of fluid challenge, PAMAM failed to prevent dentin demineralization in lactic acid. The recharged NACP nanocomposite raised the pH to above 6.5 and re-released more than 6.0 and 4.0 mmol/L Ca and P ions daily, respectively, which inhibited further demineralization. In contrast, the PAMAM + NACP combined method induced great dentin remineralization and restored the dentin microhardness to 0.54 ± 0.04 GPa, which approached that of sound dentin (P = 0.426, P > 0.05).

CONCLUSIONS

The PAMAM + NACP combination achieved dentin remineralization in an acid solution with no initial Ca and P ions, even after severe fluid challenges.

CLINICAL RELEVANCE

The novel PAMAM + NACP has a strong and sustained remineralization capability to inhibit secondary caries, even for individuals with dry mouths.

The Amelogenin-Derived Peptide TVH-19 Promotes Dentinal Tubule Occlusion and Mineralization

In this study, the amelogenin-derived peptide, TVH-19, which has been confirmed to promote mineralization, was evaluated to derive its potential to induce dentinal tubule occlusion. The binding capability of fluorescein isothiocyanate (FITC)-labeled TVH-19 to the demineralized dentin surface was analyzed by confocal laser scanning microscopy (CLSM). Additionally, the sealing function of the peptide was studied through the remineralization of demineralized dentin in vitro. The adsorption results showed that TVH-19 could bind to the hydroxyapatite and demineralized dentin surfaces, especially to periodontal dentin. Scanning electron microscopy analysis further revealed that TVH-19 created mineral precipitates. The plugging rate in the TVH-19 group was higher than that in the PBS group. Moreover, energy-dispersive X-ray spectroscopy (EDX) results indicated that the calcium/phosphorus (Ca/P) ratio of the new minerals induced by TVH-19 was close to that of the hydroxyapatite. Attenuated total internal reflection-Fourier transform infrared (ATR-FTIR) spectrometry and X-ray diffraction (XRD) results indicated that the hydroxyapatite crystals formed via remineralization elongated the axial growth and closely resembled the natural dentin components. These findings indicate that TVH-19 can effectively promote dentin sealing by binding to the periodontal dentin, promoting mineral deposition, and reducing the space between the dentin tubules.

Biomimetic oligopeptide formed enamel-like tissue and dentin tubule occlusion via mineralization for dentin hypersensitivity treatment

OBJECTIVE

Dentin hypersensitivity (DH) is a common oral disease with approximately 41.9% prevalence. Reconstruction of dental hard tissues is the preferred treatment for relieving DH. Here, we applied biomineralization method using oligopeptide simulating cementum protein 1 (CEMP1) to regenerate hard tissues on demineralized dentin.

METHODS

The self-assembly and biomineralization property of the oligopeptide were detected by scanning electron microscopy (SEM), circular dichroism spectroscopy, and transmission electron microscopy. Oligopeptide's binding capacity to demineralized dentin was evaluated by SEM and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). Remineralization was characterized using SEM, ATR-FTIR, X-ray diffraction, and nanoindentation. Oligopeptide's biocompatibility was evaluated using periodontal ligament cells.

RESULTS

Oligopeptides self-assembled into nano-matrix and templated mineral precursor formation within 24 h. Moreover, oligopeptide nano-matrix bound firmly on demineralized dentin and resisted water rinsing. Then, bound nano-matrix served as a template to initiate nucleation and transformation of hydroxyapatite on demineralized dentin. After 96 h, oligopeptide nano-matrix regenerated an enamel-like tissue layer with a thickness of 15.35 μm, and regenerated crystals occluded dentin tubules with a depth of 31.27 μm. Furthermore, the oligopeptide nano-matrix had good biocompatibility when co-cultured with periodontal ligament cells.

CONCLUSIONS

This biomimetic oligopeptide simulating CEMP1 effectively induced remineralization and reconstructed hard tissues on demineralized dentin, providing a potential biomaterial for DH treatment.

Remineralization of dentine tubules induced by phosphate-terminated PAMAM dendrimers

Various sealants have been developed to treat the exposure of dentinal tubules (DTs) and further dental hypersensitivity. Herein, the phosphate-terminated fourth generation polyamidoamine dendrimers (PAMAM-PO₃H₂) was successfully synthesized. Six duplicates of demineralized dentin and type I collagen matrix were incubated in artificial saliva solution with or without PAMAM-PO₃H₂ treatment at 37 °C for 2 weeks, respectively. The artificial saliva solution was replaced every day. These regenerated crystals on the surface of dentin and collagen matrix were confirmed to be hydroxyapatite (HAp). The approach thus demonstrates that PAMAM-PO₃H₂ can offer an efficient therapy for seal DTs in clinical dentistry.

Natural protein bioinspired materials for regeneration of hard tissues

This review describes the protein bioinspired materials for the repair of hard tissues such as enamel, dentin and bone.

Poly(amido amine) and rechargeable adhesive containing calcium phosphate nanoparticles for long-term dentin remineralization

OBJECTIVES

The objective of the present study was to investigate long-term dentin remineralization via the combination of poly(amido amine) (PAMAM) with a novel rechargeable adhesive containing nanoparticles of amorphous calcium phosphate (NACP).

METHODS

The NACP adhesive was immersed in lactic acid at pH 4 to exhaust its calcium (Ca) and phosphate (P) ion release, and then recharged with Ca and P ions. Dentin samples were pre-demineralized with 37% phosphoric acid, and then divided into four groups: (1) dentin control, (2) dentin treated with PAMAM, (3) dentin with recharged NACP adhesive, (4) dentin with PAMAM + recharged NACP adhesive. In group (2) and (4), the PAMAM-coated dentin was immersed in phosphate-buffered saline with vigorous shaking for 77 days to accelerate any detachment of the PAMAM macromolecules from the demineralized dentin. Samples were treated with a cyclic remineralization/demineralization regimen for 21 days.

RESULTS

After 77 days of fluid flow challenge, the immersed PAMAM still retained its nucleation template function. The recharged NACP adhesive possessed sustained ion re-release and acid-neutralization capability, both of which did not decrease with repeated recharge and re-release cycles. The immersed PAMAM with the recharged NACP adhesive achieved long-term dentin remineralization, and restored dentin hardness to that of healthy dentin.

CONCLUSIONS

The PAMAM + NACP adhesive completely remineralizes pre-demineralized dentin even after long-term fluid challenges and provides long-term remineralization to protect tooth structures.

CLINICAL SIGNIFICANCE

The novel PAMAM + NACP adhesive provides long-term bond protection and caries inhibition to increase the longevity of resin-based restorations.

Phosphorylated chitosan to promote biomimetic mineralization of type I collagen as a strategy for dentin repair and bone tissue engineering

This novel biomimetic mineralization technique provides an efficient method to produce an advanced mineralized matrix.

Nanoindentation of Soft Biological Materials

Nanoindentation techniques, with high spatial resolution and force sensitivity, have recently been moved into the center of the spotlight for measuring the mechanical properties of biomaterials, especially bridging the scales from the molecular via the cellular and tissue all the way to the organ level, whereas characterizing soft biomaterials, especially down to biomolecules, is fraught with more pitfalls compared with the hard biomaterials. In this review we detail the constitutive behavior of soft biomaterials under nanoindentation (including AFM) and present the characteristics of experimental aspects in detail, such as the adaption of instrumentation and indentation response of soft biomaterials. We further show some applications, and discuss the challenges and perspectives related to nanoindentation of soft biomaterials, a technique that can pinpoint the mechanical properties of soft biomaterials for the scale-span is far-reaching for understanding biomechanics and mechanobiology.

Bioinspired heptapeptides as functionalized mineralization inducers with enhanced hydroxyapatite affinity

The regeneration of mineral crystals under physiological conditions is an efficient way to repair defects in hard tissues. To achieve robust mineralization on surfaces such as the tooth enamel, an inducer requires strong affinity with the substrates and should be able to induce mineralization. Thus far, most studies used a single molecule containing two components to realize the above functions separately, which might be troublesome to synthesize and purify. In this work, inspired by the statherin in the salivary acquired pellicle, we designed a simple peptide sequence, Asp-Asp-Asp-Glu-Glu-Lys-Cys (peptide-7), to accomplish the dual tasks of adsorption and mineralization on enamel surfaces. We speculate the calcium binding ability of the negatively charged carboxylic acid groups in the peptide itself contributes to the dual functions of peptide-7. In vitro and in vivo experiments demonstrated its excellent repair effect on enamel as compared to fluoride. More importantly, due to the strong affinity between peptides and hydroxyapatite, a compact mineralized crystal layer and a strong adhesion between the regenerated minerals and the bottom substrates were observed, similar to the effect induced by fluoride. This work sheds light on the interaction mechanism between peptide-7 and minerals. In addition, since it is safer than fluoride, peptide-7 may have potential applications in the repair of other hard tissues and the functionalization of biomaterials.

Poly (amido amine) dendrimer and dental adhesive with calcium phosphate nanoparticles remineralized dentin in lactic acid

Patients with dry mouth often have an acidic oral environment lacking saliva to provide calcium (Ca) and phosphate (P) ions. There has been no report on tooth remineralization in acidic pH4 and CaP ion-lacking solutions. The objective of this study was to develop a novel method of combining poly(amido amine) (PAMAM) with adhesive containing nanoparticles of amorphous calcium phosphate (NACP) for dentin remineralization in pH4 and CaP-lacking solution for the first time. Demineralized dentin was tested in four groups: (1) dentin control, (2) dentin with PAMAM, (3) dentin with NACP adhesive, (4) dentin with PAMAM + NACP adhesive. Dentin samples were examined by scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS) and hardness testing. Increasing the NACP filler level in adhesive from 0 to 40 wt% did not negatively affect the dentin bond strength (p > 0.1). NACP adhesive released CaP ions and neutralized the acid. PAMAM alone failed to achieve dentin remineralization in lactic acid. NACP alone induced slight dentin remineralization in lactic acid (p > 0.1). In contrast, the novel PAMAM + NACP group in the pH4 and CaP-lacking solution completely remineralized the predemineralized dentin, increasing its hardness which approached that of healthy dentin (p > 0.1). In conclusion, dentin remineralization via PAMAM + NACP adhesive in pH4 and CaP-lacking acid was achieved for the first time, when conventional remineralization methods such as PAMAM or NACP did not work. The novel PAMAM + NACP method is promising to increase the longevity of the composite-tooth bond, inhibit caries, remineralize lesions and protect tooth structures, even for patients with dry mouth and an acidic oral environment. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2414-2424, 2018.

Poly(amido amine) and calcium phosphate nanocomposite remineralization of dentin in acidic solution without calcium phosphate ions

OBJECTIVE

Patients with dry mouth often have an acidic oral environment lacking saliva that provides calcium (Ca) and phosphate (P) ions. However, there has been no study on dentin remineralization by placing samples in an acidic solution without Ca and P ions. Previous studies used saliva-like solutions with neutral pH and Ca and P ions. Therefore, the objective of this study was to investigate a novel method of combining poly(amido amine) (PAMAM) with a composite of nanoparticles of amorphous calcium phosphate (NACP) on dentin remineralization in an acidic solution without Ca and P ions for the first time.

METHODS

Demineralized dentin specimens were tested into four groups: (1) dentin control, (2) dentin coated with PAMAM, (3) dentin with NACP nanocomposite, (4) dentin with PAMAM plus NACP composite. Specimens were treated with lactic acid at pH 4 without initial Ca and P ions for 21 days. Acid neutralization and Ca and P ion concentrations were measured. Dentin specimens were examined by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and hardness testing vs. remineralization efficacy.

RESULTS

NACP composite had mechanical properties similar to commercial control composites (p>0.1). NACP composite neutralized acid and released Ca and P ions. PAMAM alone failed to induce dentin remineralization. NACP alone achieved mild remineralization and slightly increased dentin hardness at 21days (p>0.1). In contrast, the PAMAM+NACP nanocomposite method in acid solution without initial Ca and P ions greatly remineralized the pre-demineralized dentin, restoring its hardness to approach that of healthy dentin (p>0.1).

SIGNIFICANCE

Dentin remineralization via PAMAM+NACP in pH 4 acid without initial Ca and P ions was demonstrated for the first time, when conventional methods such as PAMAM did not work. The novel PAMAM+NACP nanocomposite method is promising to protect tooth structures, especially for patients with reduced saliva to inhibit caries.

Biomineralization: From Material Tactics to Biological Strategy

Biomineralization is an important tactic by which biological organisms produce hierarchically structured minerals with marvellous functions. Biomineralization studies typically focus on the mediation function of organic matrices on inorganic minerals, which helps scientists to design and synthesize bioinspired functional materials. However, the presence of inorganic minerals may also alter the native behaviours of organic matrices and even biological organisms. This progress report discusses the latest achievements relating to biomineralization mechanisms, the manufacturing of biomimetic materials and relevant applications in biological and biomedical fields. In particular, biomineralized vaccines and algae with improved thermostability and photosynthesis, respectively, demonstrate that biomineralization is a strategy for organism evolution via the rational design of organism-material complexes. The successful modification of biological systems using materials is based on the regulatory effect of inorganic materials on organic organisms, which is another aspect of biomineralization control. Unlike previous studies, this study integrates materials and biological science to achieve a more comprehensive view of the mechanisms and applications of biomineralization.

Salivary acquired pellicle-inspired DpSpSEEKC peptide for the restoration of demineralized tooth enamel

Salivary acquired pellicle (SAP) is a layer of proteins and glycoproteins of salivary origin that tightly coat the tooth surface. Statherin is an important part of the SAP. The initial six-peptide sequence DpSpSEEK (where pS denotes phosphorylated serine) of the N-terminus of statherin can be immobilized on a hydroxyapatite (HAP) surface and the negatively charged domains of the DpSpSEEK side chain can catch free Ca²⁺ in saliva due to the charge adsorption effect. In order to prepare more functional materials based on DpSpSEEK, we designed a cysteine-labeled peptide sequence DpSpSEEKC, which could conjugate other macromolecules by forming a sulfur-based linkage. In this work, we measured the adsorption of DpSpSEEKC to HAP by various methods. We also coated DpSpSEEKC on a demineralized tooth enamel surface to evaluate its biomineralization capacity. The DpSpSEEKC-coated samples were characterized after immersion in artificial saliva for 2 weeks. The results showed that DpSpSEEKC has a strong adsorption capacity to HAP and could induce remineralization on the demineralized tooth enamel surface due to its carboxyl and phosphate groups. Compared with the control samples, the mechanical properties of the DpSpSEEKC-coated samples were obviously improved. In conclusion, DpSpSEEKC can provide a potential method for restoring demineralized tooth enamel.

Phosphorylation regulates the secondary structure and function of dentin phosphoprotein peptides

Dentin phosphoprotein (DPP) is the most acidic protein in vertebrates and structurally is classified as an intrinsically disordered protein. Functionally, DPP is related to dentin and bone formation, however the specifics of such association remain unknown. Here, we used atomistic molecular dynamics simulations to screen selected binding domains of DPP onto hydroxyapatite (HA), which is one of its important interacting partners. From these results, we selected a functionally relevant peptide, Ace-SSDSSDSSDSSDSSD-NH2 (named P5) and its phosphorylated form (named P5P), for experimental characterization. SAXS experiments indicated that in solution P5 was disordered, possibly in an extended conformation while P5P displayed more compact globular conformations. Circular dichroism and FTIR confirmed that, either in the presence or absence of Ca2+/HA, P5 adopts a random coil structure, whereas its phosphorylated counterpart, P5P, has a more compact arrangement associated with conformations that display β-sheet and α-helix motifs when bound to HA. In solution, P5 inhibited HA crystal growth, whereas at similar concentrations, P5P stimulated it. These findings suggest that phosphorylation controls the transient formation of secondary and tertiary structure of DPP peptides, and, most likely of DPP itself, which in turn controls HA growth in solution and possibly HA growth in mineralized tissues.

From molecules to macrostructures: recent development of bioinspired hard tissue repair

This review summarizes the bioinspired strategies for hard tissue repair, ranging from molecule-induced mineralization, to microscale assembly to macroscaffold fabrication.

Poly (amido amine) and nano-calcium phosphate bonding agent to remineralize tooth dentin in cyclic artificial saliva/lactic acid

The objectives of this study were to develop a novel method to remineralize dentin lesions, and investigate the remineralization effects of poly (amido amine) (PAMAM) dendrimer plus a bonding agent with nanoparticles of amorphous calcium phosphate (NACP) in a cyclic artificial saliva/lactic acid environment for the first time. Dentin lesions were produced via phosphoric acid. Four groups were tested: (1) dentin control, (2) dentin with PAMAM, (3) dentin with NACP bonding agent, and (4) dentin with PAMAM plus NACP bonding agent. Specimens were treated with cyclic artificial saliva/lactic acid. The remineralized dentin was examined using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), hardness and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). NACP bonding agent yielded a dentin shear bond strength similar to commercial controls (Prime & Bond NT, Dentsply; Scotchbond Multi-purpose, 3M) (p>0.1). Increasing NACP in bonding agent from 0 to 40% did not affect bond strength. NACP bonding agent neutralized the acid and released Ca ions with concentrations of 4 to 20mmol/L, and P ions of 2 to 9mmol/L. PAMAM or NACP bonding agent alone achieved slight remineralization. The PAMAM+NACP group achieved the greatest dentin remineralization p<0.05). At 20days, PAMAM+NACP increased the hardness of pre-demineralized dentin to reach the normal dentin hardness (p>0.1). In conclusion, superior remineralization of PAMAM+NACP bonding agent was demonstrated for the first time. PAMAM+NACP bonding agent induced dentin remineralization under acid challenge, when conventional remineralization methods such as PAMAM alone did not work well. The novel PAMAM+NACP bonding agent method is promising to improve the longevity of resin-dentin bonds, inhibit caries, and protect teeth.

Effect of Water-Cooled Nd:YAG Laser on Dentinal Tubule Occlusion In Vitro

OBJECTIVE

The objective of this study was to investigate the effect of a new water-cooled Nd:YAG laser on dentinal tubule occlusion.

BACKGROUND DATA

The effect of water-cooled Nd:YAG laser on dentinal tubule occlusion has not been reported.

METHODS

Acid-etched dentin samples were randomly divided into three groups: (1) dentin control, (2) dentin treated by Nd:YAG laser, (3) dentin treated by water-cooled Nd:YAG laser. After laser irradiation, half of the samples were immersed in a 6 wt% citric acid (pH 1.5) solution for 1 min to evaluate the acid resistance. The morphologies of dentin surfaces were characterized by scanning electron microscopy. The number and diameters of the open dentinal tubules were analyzed by one-way and two-way analyses of variance.

RESULTS

Both the Nd:YAG laser and water-cooled Nd:YAG laser melted the superficial layer of dentin, which caused dentinal tubule occlusion in most areas and diameter reduction of the rest open tubules. Microcracks on the dentin surface were only observed in the Nd:YAG laser group. The tubule occlusion induced by the two lasers showed a good acid resistance.

CONCLUSIONS

The effect of water-cooled Nd:YAG laser on dentinal tubule occlusion is similar to that of the Nd:YAG laser. The dentinal tubule occlusion induced by the two lasers could resist acid challenge to some extent.

Dentin remineralization in acid challenge environment via PAMAM and calcium phosphate composite

OBJECTIVES

The objective of this study was to investigate the effects of poly (amido amine) (PAMAM), composite with nanoparticles of amorphous calcium phosphate (NACP), and the combined PAMAM+NACP nanocomposite treatment, on remineralization of demineralized dentin in a cyclic artificial saliva/lactic acid environment for the first time.

METHODS

Dentin specimens were prepared and demineralized with 37% phosphoric acid for 15s. Four groups were prepared: (1) dentin control, (2) dentin coated with PAMAM, (3) dentin with NACP composite, (4) dentin with PAMAM+NACP. Specimens were treated with a cyclic artificial saliva/lactic acid regimen for 21days. Acid neutralization and calcium (Ca) and phosphate (P) ion concentrations were measured. The remineralized dentin specimens were examined by scanning electron microscopy (SEM) and hardness testing.

RESULTS

NACP nanocomposite had mechanical properties similar to commercial control composites (p>0.1). NACP composite had acid-neutralization and Ca and P ion release capability. PAMAM or NACP composite each alone achieved remineralization and increased the hardness of demineralized dentin (p<0.05). PAMAM+NACP nanocomposite achieved the greatest mineral regeneration in demineralized dentin and the greatest hardness increase in demineralized dentin, which approached the hardness of healthy dentin (p>0.1).

SIGNIFICANCE

The superior remineralization efficacy of PAMAM+NACP was demonstrated for the first time. PAMAM+NACP induced remineralization in demineralized dentin in an acid challenge environment, when conventional remineralization methods such as PAMAM did not work well. The novel PAMAM+NACP composite approach is promising for a wide range of dental applications to inhibit caries and protect tooth structures.