Antimicrobial Polymer Surfaces Containing Quaternary Ammonium Centers (QACs): Synthesis and Mechanism of Action

Synthetic polymer surfaces provide an excellent opportunity for developing materials with inherent antimicrobial and/or biocidal activity, therefore representing an answer to the increasing demand for antimicrobial active medical devices. So far, biologists and material scientists have identified a few features of bacterial cells that can be strategically exploited to make polymers inherently antimicrobial. One of these is represented by the introduction of cationic charges that act by killing or deactivating bacteria by interaction with the negatively charged parts of their cell envelope (lipopolysaccharides, peptidoglycan, and membrane lipids). Among the possible cationic functionalities, the antimicrobial activity of polymers with quaternary ammonium centers (QACs) has been widely used for both soluble macromolecules and non-soluble materials. Unfortunately, most information is still unknown on the biological mechanism of action of QACs, a fundamental requirement for designing polymers with higher antimicrobial efficiency and possibly very low toxicity. This mini-review focuses on surfaces based on synthetic polymers with inherently antimicrobial activity due to QACs. It will discuss their synthesis, their antimicrobial activity, and studies carried out so far on their mechanism of action.

A redox-responsive macrocycle based on the crown ether C7Te for enhanced bacterial inhibition

Due to increasing bacterial resistance to disinfectants, there is an urgent need for new therapeutic agents and strategies to effectively inhibit bacteria. Accordingly, we have designed and synthesized a novel crown ether known as C7Te, and its oxidized form C7TeO. These compounds have demonstrated antibacterial effectiveness against Gram-negative E. coli (BL21). Notably, C7Te has the capability to enhance the inhibition of E. coli and the prevention of biofilm formation by H2O2 through a redox response. It can also effectively disrupt preformed E. coli biofilms by penetrating biofilm barriers effectively. Additionally, computer modeling of the bacterial cell membrane using nanodiscs composed of phospholipids and encircled amphipathic proteins with helical belts has revealed that C7Te can insert into and interact with phospholipids and proteins. This interaction results in the disruption of the bacterial cell membrane leading to bacterial cell death. The utilization of redox-responsive crown ethers to augment the antibacterial capabilities of H2O2-based disinfectants represents a novel approach to supramolecular bacterial inhibition.

Morphology and Mechanics of Star Copolymer Ultrathin Films Probed by Atomic Force Microscopy in the Air and in Liquid

Star copolymer films were produced by using spin-coating, drop-casting, and casting deposition techniques, thus obtaining ultrathin and thick films, respectively. The morphology is generally flat, but it becomes substrate-dependent for ultrathin films where the planarization effect of films is not efficient. The indentation hardness of films was investigated by Force Volume Maps in both the air and liquid. In the air, ultrathin films are in the substrate-dominated zone and, thus, the elastic modulus E is overestimated, while E reaches its bulk value for drop-casted ultrathin and thick films. In liquid (water), E follows an exponential decay for all films with a minimum soaked time t0 of 0.37 and 2.65 h for ultrathin and drop-casted ultrathin and thick films, respectively. After this time, E saturates to a value on average 92% smaller than that measured in the air due to film swelling. Such results support the role of film morphology in the antimicrobial activity envisaged in the literature, suggesting also an additional role of film hardness.

Inherently Antimicrobial P(MMA-ran-DMAEMA) Copolymers Sensitive to Photodynamic Therapy: A Double Bactericidal Effect for Active Wound Dressing

In this work, two compounds belonging to the BODIPY family, and previously investigated for their photosensitizing properties, have been bound to the amino-pendant groups of three random copolymers, with different amounts of methyl methacrylate (MMA) and 2-(dimethylamino)ethyl methacrylate (DMAEMA) in the backbone. The P(MMA-ran-DMAEMA) copolymers have inherently bactericidal activity, due to the amino groups of DMAEMA and to the quaternized nitrogens bounded to BODIPY. Systems consisting of filter paper discs coated with copolymers conjugated to BODIPY were tested on two model microorganisms, Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). On solid medium, irradiation with green light induced an antimicrobial effect, visible as a clear inhibition area around the coated disks. The system based on the copolymer with 43% DMAEMA and circa 0.70 wt/wt% of BODIPY was the most efficient in both bacterial species, and a selectivity for the Gram-positive model was observed, independently of the conjugated BODIPY. A residual antimicrobial activity was also observed after dark incubation, attributed to the inherently bactericidal properties of copolymers.

Monte Carlo study of the effects of macroion charge distribution on the ionization and adsorption of weak polyelectrolytes and concurrent counterion release

HYPOTHESIS

Adsorption of weak polyelectrolytes onto charged nanoparticles, and concurrent effects such as spatial partitioning of ions may be influenced by details of the polyelectrolyte structure (linear or star-like) and size, by the mobility of the nanoparticle surface charge, or the valence of the nanoparticle counterions.

EXPERIMENTS

Ionization and complexation of weak polyelectrolytes on spherical macroions with monovalent and divalent countrions has been studied with constant-pH Monte Carlo titrations and primitive electrolyte models for linear and star-like polymers capable, also, of forming charged hydrogen bonds. Nanoparticles surface charge has been represented either as a single colloid-centered total charge (CCTC) or as surface-tethered mobile monovalent spherical charges (SMMSC).

FINDINGS

Differences in the average number of adsorbed polyelectrolyte arms and their average charge, and in the relative amount of macroion counterions (m-CI's) released upon polymer adsorption are found between CCTC and SMMSC nanoparticles. The amount of the counterions released also depends on the polymer structure. As CCTC adsorbs a lower number of star-like species arms, the degree of condensation of polymer counterions (p-CI's) onto the polyelectrolyte is also substantially higher for the CCTC colloid, with a concurrent decrease of the osmotic coefficient values.

Host defense peptide mimicking poly-β-peptides with fast, potent and broad spectrum antibacterial activities

Microbial infections have always been serious challenges to human health considering that antibiotics almost inevitably induce microbial resistance. Therefore, it is urgent to develop a new antibacterial agent that is active against drug-resistant bacteria and is less susceptible to microbial resistance. In this work, a series of host defense peptide (HDP) mimicking antibacterial poly-β-peptides were synthesized, characterized and evaluated for their biological activities. The best poly-β-peptide within this study (20 : 80 Bu : DM) displays potent and broad spectrum antibacterial activity against antibiotic-resistant super bugs and low toxicity toward mammalian cells. Moreover, these poly-β-peptides are bactericidal and kill bacteria very fast within 5 min. An antimicrobial resistance test demonstrated that bacteria develop no resistance toward the selected poly-β-peptides even over 1000 generations. Our studies demonstrate that random copolymers of heterochiral poly-β-peptides, without the need for defined secondary structures, can mimic the antimicrobial HDP. These results imply the potential application of these poly-β-peptides as new antimicrobial agents to tackle drug resistant antimicrobial infections.

Escherichia coli as a Model for the Description of the Antimicrobial Mechanism of a Cationic Polymer Surface: Cellular Target and Bacterial Contrast Response

In this study, we use Escherichia coli as a model to investigate the antimicrobial mechanism of a film made of a copolymer based on monomethylether poly(ethylene glycol), methyl methacrylate, and 2-dimethyl(aminoethyl) methacrylate, whose surface is active towards Gram-negative and Gram-positive bacteria. The polymer contains not quaternized amino groups that can generate a charged surface by protonation when in contact with water. For this purpose, we adopted a dual strategy based on the analysis of cell damage caused by contact with the polymer surface and on the evaluation of the cell response to the surface toxic action. The lithic effect on the protoplasts of E. coli showed that the polymer surface can affect the structure of cytoplasmic membranes, while assays of calcein leakage from large unilamellar vesicles at different phospholipid compositions indicated that action on membranes does not need a functionally active cell. On the other hand, the significant increase in sensitivity to actinomycin D demonstrates that the polymer interferes also with the structure of the outer membrane, modifying its permeability. The study on gene expression, based on the analysis of the transcripts in a temporal window where the contact with the polymer is not lethal and the damage is reversible, showed that some key genes of the synthesis and maintenance of the outer membrane structure ( fabR, fadR, fabA, waaA, waaC, kdsA, pldA, and pagP), as well as regulators of cellular response to oxidative stress ( soxS), are more expressed when bacteria are exposed to the polymer surface. All together these results identified the outer membrane as the main cellular target of the antimicrobial surface and indicated a specific cellular response to damage, providing more information on the antimicrobial mechanism. In this perspective, data reported here could play a pivotal role in a microbial growth control strategy based not only on the structural improvements of the materials but also on the possibility of intervening on the cellular pathways involved in the contrast reaction to these and other polymers with similar mechanisms.

Polymer brushes on structural surfaces: a novel synergistic strategy for perfectly resisting algae settlement

The current paper reports a novel model of a marine antibiofouling surface based on polymer brushes on a wrinkled silicone elastomer. Polymer brushes (POEGMA and PSPMA) were grafted via surface-initiated atom transfer radical polymerization (SI-ATRP). Successful grafting was verified with various characterization techniques including infrared spectroscopy, X-ray photoelectron spectroscopy and contact angle measurements. A series of laboratory static and dynamic bioassays as well as field immersion tests were carried out to systematically investigate the relationship between surface chemistry, surface topography and antifouling properties. The results indicated that the adhesion of marine organisms was strongly influenced by the surface chemistry composition and surface topography structure. The synergistic effect of the surface chemistry, surface topography and bulk properties of the substrates endowed the new marine coatings with excellent antifouling properties.