NiFe Nanoparticle Nest Supported on Graphene as Electrocatalyst for Highly Efficient Oxygen Evolution Reaction

Designing cost-efffective electrocatalysts for the oxygen evolution reaction (OER) holds significant importance in the progression of clean energy generation and efficient energy storage technologies, such as water splitting and rechargeable metal-air batteries. In this work, an OER electrocatalyst is developed using Ni and Fe precursors in combination with different proportions of graphene oxide. The catalyst synthesis involved a rapid reduction process, facilitated by adding sodium borohydride, which successfully formed NiFe nanoparticle nests on graphene support (NiFe NNG). The incorporation of graphene support enhances the catalytic activity, electron transferability, and electrical conductivity of the NiFe-based catalyst. The NiFe NNG catalyst exhibits outstanding performance, characterized by a low overpotential of 292.3 mV and a Tafel slope of 48 mV dec-1, achieved at a current density of 10 mA cm- 2. Moreover, the catalyst exhibits remarkable stability over extended durations. The OER performance of NiFe NNG is on par with that of commercial IrO2 in alkaline media. Such superb OER catalytic performance can be attributed to the synergistic effect between the NiFe nanoparticle nests and graphene, which arises from their large surface area and outstanding intrinsic catalytic activity. The excellent electrochemical properties of NiFe NNG hold great promise for further applications in energy storage and conversion devices.

Enhanced electron-transfer for peroxymonosulfate activation by Ni single sites adjacent to Ni nanoparticles

Oriented generation of specific reactive oxygen species (ROS) has been challenging in peroxymonosulfate (PMS)-based advanced oxidation processes (AOPs). In this work, we constructed a multifunctional catalyst composed of Ni NPs embedded in N-doped carbon nanotubes (NCNTs) with exposed Ni single-atom sites (Ni-NCNTs). The Ni-N4 single sites adjacent to the Ni NPs are more efficient for PMS adsorption and activation, resulting in enhanced production of singlet oxygen (1O2). More interesting, we demonstrated that the superoxide anion radical (O2•-) was generated from 1O2 reduction via the electron transfer from the graphitic-N sites of Ni-NCNTs rather than from O2 reduction or PMS decomposition as reported in previous studies. Thus, Ni-NCNTs can act as both electron acceptor and donor to trigger the cascade production of 1O2 and O2•-, respectively, leading to fast and selective degradation of aqueous organic pollutants. The graphitic-N adjacent to the aromatic π-conjugation of NCNTs facilitated chemisorption of 1O2 onto NCNTs via the strong π*-π interactions, and more importantly, donated the lone pair electrons to trigger the reduction of 1O2 to O2•-. This study unravels the mechanisms for enhanced production of ROS in the nanoconfined Fenton-like systems and shed new light on the application of multifunctional nanocatalyst for rapid wastewater decontamination.

Electrochemical activated molybdenum oxides based multiphase heterostructures with high hydrogen evolution activity in alkaline condition

Electrochemical activation is an effective method for synthesizing economically feasible heterogeneous hydrogen evolution reaction (HER) electrocatalysts. Herein, we first synthesized MoO2-Co2Mo3O8precatalyst, which was electrochemically activated to produce K2Mo3O10within the original phase to form the heterogeneous structure. The electrochemically activated samples demonstrate exceptional HER activity in alkaline medium, which exhibit a low overpotential of 31 mV at current density of 10 mA cm-2(135 mV at 100 mA cm-2), as well as a small Tafel slope of 34 mV dec-1. This is due to the creation of multiphase heterostructures that prompt interfacial interactions and accelerate charge transfer. Simultaneously, the creation of additional active sites increases their intrinsic activities. The combined effects collectively enhance the HER performance. The application of this method in the preparation of HER catalysts is still relatively unexplored, thus rendering our work a pioneering contribution to the field.

Ease of Electrochemical Arsenate Dissolution from FeAsO4 Microparticles during Alkaline Oxygen Evolution Reaction

Transition metal-based ABO4-type materials have now been paid significant attention due to their excellent electrochemical activity. However, a detailed study to understand the active species and its electro-evolution pathway is not traditionally performed. Herein, FeAsO4, a bimetallic ABO4-type oxide, has been prepared solvothermally. In-depth microscopic and spectroscopic studies showed that the as-synthesized cocoon-like FeAsO4 microparticles consist of several small individual nanocrystals with a mixture of monoclinic and triclinic phases. While depositing FeAsO4 on three-dimensional nickel foam (NF), it can show oxygen evolution reaction (OER) in a moderate operating potential. During the electrochemical activation of the FeAsO4/NF anode through cyclic voltammetric (CV) cycles prior to the OER study, an exponential increment in the current density (j) was observed. An ex situ Raman study with the electrode along with field emission scanning electron microscopy imaging showed that the pronounced OER activity with increasing number of CV cycles is associated with a rigorous morphological and chemical change, which is followed by [AsO4]3- leaching from FeAsO4. A chronoamperometric study and subsequent spectro- and microscopic analyses of the isolated sample from the electrode show an amorphous γ-FeO(OH) formation at the constant potential condition. The in situ formation of FeO(OH)ED (ED indicates electrochemically derived) shows better activity compared to pristine FeAsO4 and independently prepared FeO(OH). Tafel, impedance spectroscopic study, and determination of electrochemical surface area have inferred that the in situ formed FeO(OH)ED shows better electro-kinetics and possesses higher surface active sites compared to its parent FeAsO4. In this study, the electrochemical activity of FeAsO4 has been correlated with its structural integrity and unravels its electro-activation pathway by characterizing the active species for OER.

Unusual Activity of Rationally Designed Cobalt Phosphide/Oxide Heterostructure Composite for Hydrogen Production in Alkaline Medium

Design and development of an efficient, nonprecious catalyst with structural features and functionality necessary for driving the hydrogen evolution reaction (HER) in an alkaline medium remain a formidable challenge. At the root of the functional limitation is the inability to tune the active catalytic sites while overcoming the poor reaction kinetics observed under basic conditions. Herein, we report a facile approach to enable the selective design of an electrochemically efficient cobalt phosphide oxide composite catalyst on carbon cloth (CoP-Co_xO_y/CC), with good activity and durability toward HER in alkaline medium (η₁₀ = -43 mV). Theoretical studies revealed that the redistribution of electrons at laterally dispersed Co phosphide/oxide interfaces gives rise to a synergistic effect in the heterostructured composite, by which various Co oxide phases initiate the dissociation of the alkaline water molecule. Meanwhile, the highly active CoP further facilitates the adsorption-desorption process of water electrolysis, leading to extremely high HER activity.

Efficient heterogeneous Ni/Ni2P catalyst for urea-assisted water electrolysis

The built-in electrophilic/nucleophilic domain promoted the favorable adsorption of urea molecules on the surface/interface of heterogeneous Ni/Ni2P for urea oxidation.

Destabilizing Alkaline Water with 3d-Metal (Oxy)(Hydr)Oxides for Improved Hydrogen Evolution

Alkaline water electrolysis enables the use of nonprecious metal-based catalysts and therefore holds great promise for large-scale generation of renewable hydrogen fuel, especially when driven by renewable energy sources such as solar and wind. However, the sluggish kinetics of the water adsorption and dissociation steps in the alkaline hydrogen evolution reaction (HER) lower its energy conversion efficiency. Recent achievements have proved that 3d-metal (oxy)(hydr)oxides can accelerate these two kinetic processes and thereby improve the activity of diverse HER electrocatalysts from experimental and theoretical points of view. Moreover, a positive role of strong coupling between HER catalysts and 3d-metal (oxy)(hydr)oxides has been discovered recently. In this minireview, a compendious introduction to recent progress is provided, including experiments and theory. Remarks on the challenges and perspectives in this rapidly developing field are also provided.

In situ electrochemical redox tuning of Pd-Co hybrid electrocatalysts for high-performance methanol oxidation: Strong metal-support interaction

Construction of strong metal-support interaction (SMSI) is of fundamental interest in the preparation of supported metal nanoparticle catalysts with enhanced catalytic activity. Herein, we report a facile in situ electrochemical redox tuning approach to build strong interactions between metals and supports. As for a typical example, a composite electrocatalyst of Pd-Co hybrid nanoparticles directly developed on Ni substrate is found to follow a distinct surface self-reconstruction process in alkaline media via an in situ electrochemical redox procedure, which results in structural transition from the original nanoparticles (NPs) to nanosheets (NSs) coupled with a phase transformation of the Co component, Co → CoO/Co(OH)₂. The SMSI is observed in the electrochemically tuned Pd-Co hybrid system and leads to significantly enhanced catalytic activity for methanol oxidation reaction (MOR) due to the modified atomic/electronic structure, increased surface area, and more exposed electroactive sites. Compared with commercial Pd/C catalyst, the electrochemically tuned Pd-Co hybrid catalyst with SMSI exhibits superior catalytic activity (2330 mA∙mg_Pd^-1) and much better stability (remains 503 mA∙mg_Pd^-1 after 1000 cycles and 172 mA∙mg_Pd^-1 after 5000 s), and therefore has great potential in practical applications.

Ultrafine NiFe clusters anchored on N-doped carbon as bifunctional electrocatalysts for efficient water and urea oxidation

Hydrogen production through electrocatalysis is crucial in renewable energy technologies but significantly impeded by sluggish anodic reactions. Developing bifunctional anode noble-metal-free electrocatalysts towards oxygen evolution reaction (OER) and urea oxidation reaction (UOR) to boost cathodic hydrogen evolution reaction (HER) is promising but challenging to meet different reaction media and multiple applications for simultaneous clean energy production and pollution treatment. Herein, a facile one-pot thermal treatment strategy is presented to anchor NiFe nanoclusters (with a size of about 2 nm) on N-doped carbon as bifunctional electrocatalysts for both OER and UOR. Such an electrocatalyst can deliver a current density of 20 mA cm-2 with a low overpotential of 260 mV and a small Tafel slope of 42 mV dec-1 for OER, superior to the state-of-the-art Ru-based materials. Besides, this electrocatalyst also shows excellent activity for UOR with the need for just 1.37 V (vs. RHE) to attain a current density of 100 mA cm-2. In a two-electrode electrolyzer for both cathodic HER and anodic UOR, only a cell voltage of 1.50 V is required to drive a current density of 10 mA cm-2, which is 140 mV lower than that of overall water splitting electrolysis (1.64 V). The excellent electrooxidative performance can be attributed to the improved conductivity, abundant active sites and fast charge transfer and transport benefiting from the ultrafine structure of NiFe clusters and their synergistic effect with N-doped carbon.

One-pot synthesis of Mn-Fe bimetallic oxide heterostructures as bifunctional electrodes for efficient overall water splitting

The design of Earth-abundant and cost-effective electrocatalysts for highly active and stable electrochemical water splitting in practical production is the primary demand. Herein, bimetallic oxides anchored to three-dimensional (3D) porous conductive nickel foam (NF) are constructed using a simple in situ hydrothermal method for efficient overall water splitting. The vertically aligned Mn3O4/Fe2O3 heterojunction nanosheets have synergy between hierarchical metal oxides and heterogeneous interface, and show excellent performance toward the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in an alkaline environment. By adjusting the molar ratio of Fe : Mn, the morphology, composition and electronic structure of MnFeO-NF-x composites (x represents the ratio of Fe : Mn) can be adjusted to exhibit diverse catalytic activities. In particular, MnFeO-NF-0.4 (0.4 indicates the Fe : Mn ratio of 0.4 : 1) and MnFeO-NF-0.8 display outstanding performance with ultralow overpotentials of 157 mV for the OER and 64 mV for the HER to achieve a current density of 10 mA cm-2, respectively. Furthermore, MnFeO-NF-0.4 and MnFeO-NF-0.8 are assembled into a water splitting electrolyzer, which can reach a current density of 10 mA cm-2 with a low voltage of 1.59 V. Interestingly, Mn-M (M = Co, Ni, and Mo) products can be obtained easily by using different metal salts, indicating the universality of the current one-pot hydrothermal method.

Three-Dimensional Heterostructured NiCoP@NiMn-Layered Double Hydroxide Arrays Supported on Ni Foam as a Bifunctional Electrocatalyst for Overall Water Splitting

Herein, the rational design and preparation of three-dimensional heterostructured NiCoP@NiMn-layered double hydroxide arrays supported on Ni foam (NiCoP@NiMn LDH/NF) is reported as a new bifunctional water-splitting electrocatalyst with high performance. Prepared with facile hydrothermal reactions and phosphorization, the NiCoP@NiMn LDH/NF is simultaneously highly active toward oxygen evolution reaction (OER) (100, 300, and 600 mA cm^-2 at overpotentials of 293, 315, and 327 mV, respectively) and hydrogen evolution reaction (HER) (100, 200, and 300 mA cm^-2 at overpotentials of 116, 130, and 136 mV, respectively). Interestingly, with cell voltages of 1.519, 1.642, 1.671, and 1.687 V at 10, 100, 200, and 300 mA cm^-2, respectively, for overall water splitting, this electrocatalyst achieves 95.2% faradaic efficiency for OER, suggesting a relatively high contribution of water splitting in the apparent current in spite of the existence of partial catalyst oxidation. The heterostructure arrays supported on Ni foam have some advantages, acting as a bifunctional water-splitting electrocatalyst: (1) heterostructured NCoP@NiMn LDH combines the intrinsic properties of individual NiCoP (excellent activity for HER) and NiMn LDH (high activity for OER) via the effective interface engineering between the two phases; (2) the NiCoP core material serves as a fast electron transfer channel to enhance the electrode's electrical conductivity; and (3) Ni foam with a three-dimensional-network structure as a support is beneficial to exposing more active sites and ensures efficient gas bubble release and electron/mass transfer.

Engineering 2D Metal-Organic Framework/MoS2 Interface for Enhanced Alkaline Hydrogen Evolution

2D metal-organic frameworks (MOFs) have been widely investigated for electrocatalysis because of their unique characteristics such as large specific surface area, tunable structures, and enhanced conductivity. However, most of the works are focused on oxygen evolution reaction. There are very limited numbers of reports on MOFs for hydrogen evolution reaction (HER), and generally these reported MOFs suffer from unsatisfactory HER activities. In this contribution, novel 2D Co-BDC/MoS₂ (BDC stands for 1,4-benzenedicarboxylate, C₈ H₄ O₄ ) hybrid nanosheets are synthesized via a facile sonication-assisted solution strategy. The introduction of Co-BDC induces a partial phase transfer from semiconducting 2H-MoS₂ to metallic 1T-MoS₂ . Compared with 2H-MoS₂ , 1T-MoS₂ can activate the inert basal plane to provide more catalytic active sites, which contributes significantly to improving HER activity. The well-designed Co-BDC/MoS₂ interface is vital for alkaline HER, as Co-BDC makes it possible to speed up the sluggish water dissociation (rate-limiting step for alkaline HER), and modified MoS₂ is favorable for the subsequent hydrogen generation step. As expected, the resultant 2D Co-BDC/MoS₂ hybrid nanosheets demonstrate remarkable catalytic activity and good stability toward alkaline HER, outperforming those of bare Co-BDC, MoS₂ , and almost all the previously reported MOF-based electrocatalysts.

One-dimensional CoS2-MoS2 nano-flakes decorated MoO2 sub-micro-wires for synergistically enhanced hydrogen evolution

CoS2-MoS2 nanoflakes decorated MoO2 (CoMoOS) hybrid submicro-wires with rich active interfaces were synthesized via the sulfuration of CoMoO4. They showed excellent activity while synergistically catalyzing the hydrogen evolultion reaction (HER) in basic media by promoting both the water dissociation and hydrogen absorption steps. Thus, the CoMoOS catalysts only needed 123 mV to achieve 10 mA cm-2 with a small Tafel slope in alkaline solutions, and required 1.68 V to obtain the same current density when assembled into an alkaline electrolyser.

Synthesis of polyoxometalates derived bifunctional catalyst towards efficient overall water splitting in neutral and alkaline medium

The development of efficient hydrogen evolution and oxygen evolution reactions bifunctional electrocatalyst for overall water splitting is highly desired but still a great challenge, especially under neutral condition. With the unique properties of polyoxometalate and MOFs materials as well as rich transition metal contents, herein we successfully synthesize a novel bi-phase structure of cobalt and molybdenum carbide coated with nitrogen-doped graphite (Co-Mo₂C@NC) which possesses excellent activity as water splitting electrocatalyst at neutral pH. This noble metal-free, bi-phase electrocatalyst exhibits Hydrogen Evolution Reaction (HER) and Oxygen Evolution Reaction (OER) overpotentials of 260 mV and 440 mV at 10 mA cm^-2, respectively. The two-electrode system using Co-Mo₂C@NC as both the anode and cathode drives 10 mA cm^-2 at a cell voltage of 1.83 V with a remarkable long-term stability. Besides, the Co-Mo₂C@NC also shows promising activity in alkaline condition that reaches 10 mA cm^-2 at a cell voltage of 1.66 V. This work paves a new avenue to the design of the unique, economic and promising non-noble metal electrode materials for practical applications in the electrochemical energy storage and conversion devices.

Electrocatalysts for Hydrogen Evolution in Alkaline Electrolytes: Mechanisms, Challenges, and Prospective Solutions

Hydrogen evolution reaction (HER) in alkaline medium is currently a point of focus for sustainable development of hydrogen as an alternative clean fuel for various energy systems, but suffers from sluggish reaction kinetics due to additional water dissociation step. So, the state-of-the-art catalysts performing well in acidic media lose considerable catalytic performance in alkaline media. This review summarizes the recent developments to overcome the kinetics issues of alkaline HER, synthesis of materials with modified morphologies, and electronic structures to tune the active sites and their applications as efficient catalysts for HER. It first explains the fundamentals and electrochemistry of HER and then outlines the requirements for an efficient and stable catalyst in alkaline medium. The challenges with alkaline HER and limitation with the electrocatalysts along with prospective solutions are then highlighted. It further describes the synthesis methods of advanced nanostructures based on carbon, noble, and inexpensive metals and their heterogeneous structures. These heterogeneous structures provide some ideal systems for analyzing the role of structure and synergy on alkaline HER catalysis. At the end, it provides the concluding remarks and future perspectives that can be helpful for tuning the catalysts active-sites with improved electrochemical efficiencies in future.

A 3D porous Ni-CeO2 nanosheet array as a highly efficient electrocatalyst toward alkaline hydrogen evolution

A 3D porous Ni-CeO₂ nanosheet array supported on a Ti mesh (Ni-CeO₂/TM) behaves as an efficient and stable alkaline HER electrocatalyst, offering a current density of 10 mA cm⁻² at an overpotential of 67 mV.

Synthesis of 3D Hexagram-Like Cobalt-Manganese Sulfides Nanosheets Grown on Nickel Foam: A Bifunctional Electrocatalyst for Overall Water Splitting

The exploration of low-cost and efficient bifunctional electrocatalysts for oxygen evolution reaction and hydrogen evolution reaction through tuning the chemical composition is strongly required for sustainable resources. Herein, we developed a bimetallic cobalt-manganese sulfide supported on Ni foam (CMS/Ni) via a solvothermal method. It has discovered that after combining with the pure Co₉S₈ and MnS, the morphologies of CMS/Ni have modulated. The obtained three-dimensionally hexagram-like CMS/Ni nanosheets have a significant increase in electrochemical active surface area and charge transport ability. More than that, the synergetic effect of Co and Mn has also presented in this composite. Benefiting from these, the CMS/Ni electrode shows great performance toward hydrogen evolution reaction and oxygen evolution reaction in basic medium, comparing favorably to that of the pure Co₉S₈/Ni and MnS/Ni. More importantly, this versatile CMS/Ni can catalyze the water splitting in a two-electrode system at a potential of 1.47 V, and this electrolyzer can be efficiently driven by a 1.50 V commercial dry battery.

Synthesis and characterization of an IrO2–Fe2O3 electrocatalyst for the hydrogen evolution reaction in acidic water electrolysis

An IrO₂–Fe₂O₃ electrocatalyst was prepared for the HER in acidic water electrolysis and exhibits higher activity than IrO₂.

IrO2–TiO2 electrocatalysts for the hydrogen evolution reaction in acidic water electrolysis without activation

IrO₂–TiO₂ electrodes do not need activation to obtain excellent activity for the HER in acidic water electrolysis.