Synthesis of the tris-Amino Acid Labionin through a Contrasteric Aziridination and Ring-Opening Sequence

The non-proteinogenic tris-amino acid labionin was discovered in 2010 and since has been described in many natural products, defining an entire family of lanthipeptides. The unusual amino acid is biosynthetically produced by the sequential condensation of a cysteine onto two dehydroalanines. An attempt in 2011 to synthesize the amino acid monomeric unit was unsuccessful yet served as a valuable foundation and guide to the present work. A recently disclosed methodology for the selective opening of aziridines by mercaptan nucleophiles was applied to another methodology for contrasteric aziridination, thus enabling a short synthesis of challenging and elusive labionin.

Fe-Catalyzed α-C(sp3)-H Amination of N-Heterocycles

Nitrogen-heterocycles are privileged structures in both marketed drugs and natural products. On the other hand, C-H amination reactions furnish unconventional and straightforward approaches for the construction of C-N bonds. Yet, most of the known methods rely on precious metal catalysts. Herein we report a site-selective intermolecular C(sp3)-H amination of N-heterocycles, catalyzed by inexpensive FeCl2, which allows the functionalization of a wide range of pharmaceutically relevant cyclic amines. The C-H amination occurs site-selectively in α-position to the nitrogen atom, even when weaker C-H bonds are present, and furnishes Troc-protected aminals or amidines. The method employs the N-heterocycle as limiting reagent and is applicable to the late-stage functionalization of complex molecules. Its synthetic potential was further illustrated through the derivatization of α-aminated products and the application to a concise total synthesis of the reported structure for senobtusin. Mechanistic studies allowed to propose a plausible reaction mechanism involving a turnover-limiting Fe-nitrene generation followed by fast H atom transfer and radical rebound.

Skeletal Editing via Transition-Metal-Catalyzed Nitrene Insertion

Metal-nitrenes are valuable reactive intermediates for synthesis and are widely used to construct biologically relevant scaffolds, complexes and functionalized molecules. The ring expansion of cyclic molecules via single-nitrogen-atom insertion via nitrene or metal-nitrenoid intermediates has emerged as a promising modern strategy for driving advantageous nitrogen-rich compound synthesis. In recent years, the catalytic insertion of a single nitrogen atom into carbocycles, leading to N-heterocycles, has become an important focus of modern synthetic approaches with applications in medicinal chemistry, materials science, and industry. Catalytic single-nitrogen-atom insertions have been increasing in prominence in modern organic synthesis due to their capability to construct high-value added nitrogen-containing heterocycles from simple feedstocks. In this review, we will discuss the rapidly growing field of skeletal editing via single-nitrogen-atom insertion using transition metal catalysis to access nitrogen-containing heterocycles, with a focus on nitrogen insertion across a wide spectrum of carbocycles.

Metal-Free Aziridination of Unactivated Olefins via Transient N-Pyridinium Iminoiodinanes

We describe a metal-free aziridination of unactivated olefins to generate N-pyridinium aziridines. Subsequent cross-coupling affords N-aryl aziridines, and reductive depyridylation affords N-H aziridines. Kinetics experiments, based on a variable time normalization analysis (VTNA), indicate that aziridination proceeds via a highly electrophilic N-pyridinium iminoiodinane intermediate. These studies expand build-and-couple aziridine synthesis to unactivated olefins and introduce charge-enhanced electrophilicity into the chemistry of iminoiodinanes.

Taming Tethered Nitreniums for Alkene Functionalization Reactions

We present the first examples of amino-trifluoroacetoxylations of alkenes using N-alkoxy carbamate tethers. Hypervalent iodine oxidants mediate this transformation, providing a "green" alternative to existing intramolecular amino-hydroxylation protocols which use toxic metals such as osmium. In all cases examined, the reaction is regioselective and stereospecific, with the geometry of the starting alkene controlling the diastereomeric outcome. By analogy to prior art and from our own observations, we posit that a transient nitrenium species serves as a key intermediate.

Skeletal Editing by Hypervalent Iodine Mediated Nitrogen Insertion

Hypervalent iodine reagents are versatile and readily accessible reagents that have been extensively applied in contemporary synthesis in modern organic chemistry. Among them, iodonitrene (ArI=NR), is a powerful reactive species, widely used for a single-nitrogen-atom insertion reaction, and skeletal editing to construct N-heterocycles. Skeletal editing with reactive iodonitrene components has recently emerged as an exciting approach in modern chemical transformation. These reagents have been extensively used to produce biologically relevant heterocycles and functionalized molecular architectures. Recently, the insertion of a nitrogen-atom into hydrocarbons to generate N-heterocyclic compounds using hypervalent iodine reagents has been a significant focus in the field of molecular editing reactions. In this review, we discuss the rapidly emerging field of nitrene insertion, including skeletal editing and nitrogen insertion, using hypervalent iodine reagents to access nitrogen-containing heterocycles, and the current mechanistic understanding of these processes.

Direct synthesis of branched amines enabled by dual-catalyzed allylic C─H amination of alkenes with amines

Direct conversion of hydrocarbons into amines represents an important and atom-economic goal in chemistry for decades. However, intermolecular cross-coupling of terminal alkenes with amines to form branched amines remains extremely challenging. Here, a visible-light and Co-dual catalyzed direct allylic C─H amination of alkenes with free amines to afford branched amines has been developed. Notably, challenging aliphatic amines with strong coordinating effect can be directly used as C─N coupling partner to couple with allylic C─H bond to form advanced amines with molecular complexity. Moreover, the reaction proceeds with exclusive regio- and chemoselectivity at more steric hinder position to deliver primary, secondary, and tertiary aliphatic amines with diverse substitution patterns that are difficult to access otherwise.

A Comparative Study of Cationic Copper(I) Reagents Supported by Bipodal Tetramethylguanidinyl-Containing Ligands as Nitrene-Transfer Catalysts

The bipodal compounds [(TMG2biphenN-R)CuI-NCMe](PF6) (R = Me, Ar (4-CF3Ph-)) and [(TMG2biphenN-Me)CuI-I] have been synthesized with ligands that feature a diarylmethyl- and triaryl-amine framework and superbasic tetramethylguanidinyl residues (TMG). The cationic Cu(I) sites mediate catalytic nitrene-transfer reactions between the imidoiodinane PhI = NTs (Ts = tosyl) and a panel of styrenes in MeCN, to afford aziridines, demonstrating comparable reactivity profiles. The copper reagents have been further explored to execute C-H amination reactions with a variety of aliphatic and aromatic hydrocarbons and two distinct nitrene sources PhI = NTs and PhI = NTces (Tces = 2,2,2-trichloroethylsulfamate) in benzene/HFIP (10:2 v/v). Good yields have been obtained for sec-benzylic and tert-C-H bonds of various substrates, especially with the more electron-deficient catalyst [(TMG2biphenN-Ar)CuI-NCMe](PF6). In conjunction with earlier studies, the order of reactivity of these bipodal cationic reagents as a function of the metal employed is established as Cu > Fe > Co ≥ Mn. However, as opposed to the base-metal analogues, the bipodal Cu reagents are less reactive than a similar tripodal Cu catalyst. The observed fluorophilicity of the bipodal Cu compounds may provide a deactivation pathway.

Catalyst-Controlled Intermolecular Homobenzylic C(sp3)-H Amination for the Synthesis of β-Arylethylamines

The combination of a tailored sulfamate with a C4-symmetrical rhodium(II) tetracarboxylate allows to uncover a selective intermolecular amination of unactivated homobenzylic C(sp3)-H bonds. The reaction has a broad scope (>30 examples) and proceeds with a high level of regioselectivity with homobenzylic/benzylic ratio of up to 35:1, thereby providing a direct access to β-arylethylamines that are of utmost interest in medicinal chemistry. Computational investigations evidenced a concerted mechanism, involving an asynchronous transition state. Based on a combined activation strain model and energy decomposition analysis, the regioselectivity of the reaction was found to rely mainly on the degree of orbital interaction between the [Rh2]-nitrene and the C-H bond. The latter is facilitated at the homobenzylic position due to the establishment of specific noncovalent interactions within the catalytic pocket.

Examining the effects of additives and precursors on the reactivity of rhodium alkyl nitrenes generated from substituted hydroxylamines

In this study, the reactivity of the alkyl nitrenes, generated from the substituted hydroxylamine precursors, was determined using the same rhodium catalyst. The results revealed that in competitive C-H insertion experiments, the regioselectivity between benzylic and tertiary C-H bonds could be modulated by adding Brønsted acids or changing the substituents on oxygen. This study enhances our understanding of the metallonitrene structures and provides valuable insights for further development of selective N-heterocycle syntheses.

Cationic Divalent Metal Sites (M = Mn, Fe, Co) Operating as Both Nitrene-Transfer Agents and Lewis Acids toward Mediating the Synthesis of Three- and Five-Membered N-Heterocycles

The tripodal compounds [(TMG3trphen)MII-solv](PF6)2 (M = Mn, Fe, Co; solv = MeCN, DMF) and bipodal analogues [(TMG2biphen)MII(NCMe)x](PF6)2 (x = 3 for Mn, Fe; x = 2 for Co) and [(TMG2biphen)MIICl2] have been synthesized with ligands that feature a triaryl- or diarylmethyl-amine framework and superbasic tetramethylguanidinyl residues (TMG). The dicationic M(II) sites mediate catalytic nitrene-transfer reactions between the imidoiodinane PhI═NTs (Ts = tosyl) and a panel of styrenes in MeCN to afford aziridines and low yields of imidazolines (upon MeCN insertion) with an order of productivity that favors the bipodal over the tripodal reagents and a metal preference of Fe > Co ≥ Mn. In CH2Cl2, the more acidic Fe(II) sites favor formation of 2,4-diaryl-N-tosylpyrrolidines by means of an in situ (3 + 2) cycloaddition of the initially generated 2-aryl-N-tosylaziridine with residual styrene. In the presence of ketone, 1,3-oxazolidines can be formed in practicable yields, involving a single-pot cycloaddition reaction of alkene, nitrene, and ketone (2 + 1 + 2). Mechanistic studies indicate that the most productive bipodal Fe(II) site mediates stepwise addition of nitrene to olefins to generate aziridines with good retention of stereochemistry and further enables aziridine ring opening to unmask a 1,3-zwitterion that can undergo cycloaddition with dipolarophiles (MeCN, alkene, ketone) to afford five-membered N-heterocycles.

Catalytic Enantioselective Amination of Enol Silyl Ethers Using a Chiral Paddle-Wheel Diruthenium Complex

A chiral paddle-wheel dinuclear ruthenium catalyst was applied to a catalytic asymmetric nitrene-transfer reaction with enol silyl ethers. The ruthenium catalyst was applicable to aliphatic enol silyl ethers as well as aryl-containing enol silyl ethers. The substrate scope of the ruthenium catalyst was superior to that of analogous chiral paddle-wheel rhodium catalysts. α-Amino ketones derived from aliphatic substrates were obtained in up to 97% ee with the ruthenium catalyst, while analogous rhodium catalysts resulted in only moderate enantioselectivity.

Nitrene transfer reaction with hydroxylamine derivatives

Recent progress on catalytic nitrene transfer reactions with hydroxylamine derivatives as prevalent precursors is summarized in this highlight. The salient features of these N-O derived nitrene transfer reagents are that they are readily available, bench-stable, and can be facilely activated by a range of transition metal-catalysts under mild conditions. The application of these reagents in transition metal-catalysis has led to many new amidation or amination reactions, such as C-H insertions and aziridination of olefins. These reagents have also been applied in difunctionalisation of unsaturated bonds, dearomative amination of indoles, and formation of N-X bonds. Moreover, the recent achievements in photocatalysis and enzyme catalysis further emphasize the importance of these appealing reagents. This highlight provides an overview of these reactions reported in recent years. Challenges and potential opportunities for future developments are also discussed.

Chiral Iron Porphyrins Catalyze Enantioselective Intramolecular C(sp3 )-H Bond Amination Upon Visible-Light Irradiation

Iron-catalyzed asymmetric amination of C(sp³ )-H bonds is appealing for synthetic applications due to the biocompatibility and high earth abundance of iron, but examples of such reactions are sparse. Herein we describe chiral iron complexes of meso- and β-substituted-porphyrins that can catalyze asymmetric intramolecular C(sp³ )-H amination of aryl and arylsulfonyl azides to afford chiral indolines (29 examples) and benzofused cyclic sulfonamides (17 examples), respectively, with up to 93 % ee (yield: up to 99 %) using 410 nm light under mild conditions. Mechanistic studies, including DFT calculations, for the reactions of arylsulfonyl azides reveal that the Fe(NSO₂ Ar) intermediate generated in situ under photochemical conditions reacts with the C(sp³ )-H bond through a stepwise hydrogen atom transfer/radical rebound mechanism, with enantioselectivity arising from cooperative noncovalent interactions between the Fe(NSO₂ Ar) unit and the peripheral substituents of the chiral porphyrin scaffold.

Synthetic Study of Dragmacidin E: Enantioselective Construction of the Seven-Membered Ring-Fused Indole Skeleton with Contiguous Stereocenters

We developed an enantioselective synthetic method of constructing a seven-membered ring-fused indole skeleton with contiguous stereocenters for the synthesis of dragmacidin E. Introduction of chirality at the benzylic position was achieved by Ir-catalyzed asymmetric hydrogenation. After construction of the tricyclic molecular framework using Pd-catalyzed cascade cyclization, the tetrasubstituted carbon center was created using the Ag nitrene-mediated C-H amination reaction. The developed method provided access to the functionalized seven-membered ring-fused indole skeleton with a hydroxymethyl branch in the tetrasubstituted carbon.

Iron porphyrin-catalysed C(sp3)–H amination with alkyl azides for the synthesis of complex nitrogen-containing compounds

With the readily prepared iron porphyrin complex as a catalyst and starting with alkyl azides, a panel of nitrogen-containing skeletons representing the families of natural alkaloids and bioactive compounds could be prepared in good yields.

Iron-Catalyzed Intermolecular Amination of Benzylic C(sp3)-H Bonds

A catalytic system for intermolecular benzylic C(sp³)-H amination is developed utilizing 1,2,3,4-tetrazole as a nitrene precursor via iron catalysis. This method enables direct installation of 2-aminopyridine into the benzylic and heterobenzylic position. The method selectively aminates 2° benzylic C(sp³)-H bond over the 3° and 1° benzylic C(sp³)-H bonds. Experimental studies reveal that the C(sp³)-H amination undergoes via the formation of a benzylic radical intermediate. This study reports the discovery of new method for 2-pyridine substituted benzylamine synthesis using inexpensive, biocompatible base metal catalysis that should have wide application in the context of medicinal chemistry and drug discovery.

A Synthetic Cycle for Heteroarene Synthesis by Nitride Insertion

Recent interest in skeletal editing necessitates the continued development of reagent classes with the ability to transfer single atoms. Terminal transition metal nitrides hold immense promise for single-atom transfer, though their use in organic synthesis has so far been limited. Here we demonstrate a synthetic cycle with associated detailed mechanistic studies that primes the development of terminal transition metal nitrides as valuable single-atom transfer reagents. Specifically, we show [cis-terpyOsNCl2 ]PF6 inserts nitrogen into indenes to afford isoquinolines. Mechanistic studies for each step (insertion, aromatization, product release, and nitride regeneration) are reported, including crystallographic characterization of diverted intermediates, kinetics, and computational studies. The mechanistic foundation set by this synthetic cycle opens the door to the further development of nitrogen insertion heteroarene syntheses promoted by late transition metal nitrides.

Aziridination Reactivity of a Manganese(II) Complex with a Bulky Chelating Bis(Alkoxide) Ligand

Treatment of Mn(N(SiMe₃)₂)₂(THF)₂ with bulky chelating bis(alkoxide) ligand [1,1′:4′,1′′-terphenyl]-2,2′′-diylbis(diphenylmethanol) (H₂[O-terphenyl-O]^Ph) formed a seesaw manganese(II) complex Mn[O-terphenyl-O]^Ph(THF)₂, characterized by structural, spectroscopic, magnetic, and analytical methods. The reactivity of Mn[O-terphenyl-O]^Ph(THF)₂ with various nitrene precursors was investigated. No reaction was observed between Mn[O-terphenyl-O]^Ph(THF)₂ and aryl azides. In contrast, the treatment of Mn[O-terphenyl-O]^Ph(THF)₂ with iminoiodinane PhINTs (Ts = p-toluenesulfonyl) was consistent with the formation of a metal-nitrene complex. In the presence of styrene, the reaction led to the formation of aziridine. Combining varying ratios of styrene and PhINTs in different solvents with 10 mol% of Mn[O-terphenyl-O]^Ph(THF)₂ at room temperature produced 2-phenylaziridine in up to a 79% yield. Exploration of the reactivity of Mn[O-terphenyl-O]^Ph(THF)₂ with various olefins revealed (1) moderate aziridination yields for p-substituted styrenes, irrespective of the electronic nature of the substituent; (2) moderate yield for 1,1′-disubstituted α-methylstyrene; (3) no aziridination for aliphatic α-olefins; (4) complex product mixtures for the β-substituted styrenes. DFT calculations suggest that iminoiodinane is oxidatively added upon binding to Mn, and the resulting formal imido intermediate has a high-spin Mn(III) center antiferromagnetically coupled to an imidyl radical. This imidyl radical reacts with styrene to form a sextet intermediate that readily reductively eliminates the formation of a sextet Mn(II) aziridine complex.

Iron(II)-Catalyzed Nitrene Transfer Reaction of Sulfoxides with N-Acyloxyamides

An iron(II)-catalyzed nitrene transfer reaction of sulfoxides with N-acyloxyamides has been developed, leading to the efficient construction of N-acyl sulfoximines with high functional-group compatibility. The current catalytic transformation was carried out under an air atmosphere at ambient temperature and could be scaled up to gram scale with a catalyst loading of 1 mol %. Application of the methodology was demonstrated by facile C-H acetoxylation and olefination using the N-acyl sulfoximine as the directing group.

In Situ Generation of N-Triflylimino-λ3-iodanes: Application to Imidation of Phosphines and Catalytic α-Amidation of 1,3-Dicarbonyl Compounds

We describe the imidation of phosphines and α-amidation of 1,3-dicarbonyl compounds using N-triflylimino-λ³-iodane, which is generated in situ from iodosylarene and triflylamide without any other additives. Furthermore, the imino-λ³-iodane catalytically generated from an iodoarene precatalyst with oxone and triflylamide promotes α-amidation of 1,3-dicarbonyl compounds, representing the first method catalyzed by imino-λ³-iodane.

N-Acylimino-λ3-iodanes from the Metathesis of Iodosoarenes and Nitriles for the Photoinduced C-H Perfluoroacylamination of (Hetero)Arenes

An efficient and scalable synthesis of N-perfluoroacylimino-λ³-iodanes was achieved via an unprecedented metathesis between iodosoarenes and perfluoroalkanenitriles. The perfluoroacylamino groups of the iodanes could be introduced to aromatic and heteroaromatic rings using photoirradiation.

Photoinduced α-C-H Amination of Cyclic Amine Scaffolds Enabled by Polar-Radical Relay

Herein, we report a polar-radical relay strategy for α-C-H amination of cyclic amines with N-chloro-N-sodio-carbamates. The relay is initiated by in situ generation of cyclic iminium intermediate using N-iodosuccinimide (NIS) oxidant as an initiator, which then operates through a series of polar (addition and elimination) and radical (homolysis, hydrogen- and halogen atom transfer) reactions to enable the challenging C-N bond formation in a controlled manner. A broad range of α-amino cyclic amines were readily accessed with excellent regioselectivity, and the superb applicability was further demonstrated by functionalization of biologically relevant compounds.

Visible-Light-Induced Decarboxylation of Dioxazolones to Phosphinimidic Amides and Ureas

A visible-light-induced external catalyst-free decarboxylation of dioxazolones was realized for the bond formation of N=P and N-C bonds to access phosphinimidic amides and ureas. Various phosphinimidic amides and ureas (47 examples) were synthesized with high yields (up to 98%) by this practical strategy in the presence of the system's ppm Fe.

Diastereoconvergent synthesis of anti-1,2-amino alcohols with N-containing quaternary stereocenters via selenium-catalyzed intermolecular C–H amination

We report a diastereoconvergent synthesis of anti-1,2-amino alcohols bearing N-containing quaternary stereocenters using an intermolecular direct C–H amination of homoallylic alcohol derivatives catalyzed by a phosphine selenide. Destruction of the allylic stereocenter during the selenium-catalyzed process allows selective formation of a single diastereomer of the product starting from any diastereomeric mixture of the starting homoallylic alcohol derivatives, eliminating the need for the often-challenging diastereoselective preparation of starting materials. Mechanistic studies show that the diastereoselectivity is controlled by a stereoelectronic effect (inside alkoxy effect) on the transition state of the final [2,3]-sigmatropic rearrangement, leading to the observed anti selectivity. The power of this protocol is further demonstrated on an extension to the synthesis of syn-1,4-amino alcohols from allylic alcohol derivatives, constituting a rare example of 1,4-stereoinduction.

We report a diastereoconvergent synthesis of anti-1,2-amino alcohols bearing N-containing quaternary stereocenters using an intermolecular direct C–H amination of homoallylic alcohol derivatives catalyzed by a phosphine selenide.

C(sp3)–H 1,3-diamination of cumene derivatives catalyzed by a dirhodium(ii) catalyst

Using the single-electron oxidation cycle of a dirhodium catalyst, amination can form two primary C–N bonds in a one-step process.

A comparative study of Rh2-catalyzed intermolecular nitrene transfer reactions: mechanism and chemoselectivity

The intermolecular catalytic mechanisms using Rh2(esp)2 and Rh2(OAc)4 are analogous and their large difference in aziridination-to-amination chemoselectivity stems from the steric effect.

Electrophilic Aminating Agents in Total Synthesis

Classical amination methods involve the reaction of a nitrogen nucleophile with an electrophilic carbon center; however, in recent years, umpoled strategies have gained traction where the nitrogen source acts as an electrophile. A wide range of electrophilic aminating agents are now available, and these underpin a range of powerful C-N bond-forming processes. In this Review, we highlight the strategic use of electrophilic aminating agents in total synthesis.

Ligand-Enabled, Copper-Catalyzed Electrophilic Amination for the Asymmetric Synthesis of β-Amino Acids

Catalytic asymmetric nitrene transfer has emerged as a reliable method for the synthesis of nitrogen-containing chiral compounds. Herein, we report the copper-catalyzed intramolecular asymmetric electrophilic amination of aromatic rings. The reactive intermediate is a copper-alkyl nitrene generated from isoxazolidin-5-ones. Copper catalysis promotes three classes of asymmetric transformations, namely, asymmetric desymmetrization, parallel kinetic resolution, and kinetic resolution, expanding the repertoire of alkyl nitrene transfer and providing various cyclic and linear β-amino acids in their enantioenriched forms.

A soluble iron(II)-phthalocyanine-catalyzed intramolecular C(sp3)-H amination with alkyl azides

Herein, we describe a soluble iron(II)-phthalocyanine, [Fe^II(^tBu₄Pc)(py)₂] (Pc = phthalocyaninato(2-)), as an effective catalyst in intramolecular C(sp³)-H bond amination, with alkyl azides as the nitrogen source, to afford the amination products in moderate to excellent yields with a broad substrate scope.

Nitrene transfers mediated by natural and artificial iron enzymes

Amines are ubiquitous in biology and pharmacy. As a consequence, introducing N functionalities in organic molecules is attracting strong continuous interest. The past decade has witnessed the emergence of very efficient and selective catalytic systems achieving this goal thanks to engineered hemoproteins. In this review, we examine how these enzymes have been engineered focusing rather on the rationale behind it than the methodology employed. These studies are put in perspective with respect to in vitro and in vivo nitrene transfer processes performed by cytochromes P450. An emphasis is put on mechanistic aspects which are confronted to current molecular knowledge of these reactions. Forthcoming developments are delineated.

Site-Selective Molecular Transformation: Acylation of Hydroxy Groups and C-H Amination

Control of site selectivity is an exciting direction for synthetic organic chemistry owing to the possibility of selective modification of multifunctionalized molecules, ultimately including biomacromolecules. In this review, our recent research related to site selectivity in two types of transformation, namely, the acylation of hydroxy groups and C-H amination, is summarized. Regarding the acylation of hydroxy groups, catalyst-controlled site selectivity enables unconventional retrosynthetic analysis, leading to efficient syntheses of sugar-related natural and unnatural products. Regarding C-H amination, the discovery of unprecedented reaction sites in intermolecular amination mediated by dirhodium nitrenes is described. The findings of this research demonstrate the power of site-selective transformation in the synthesis of a particular class of compounds.

A bench-stable N-trifluoroacetyl nitrene equivalent for a simple synthesis of 2-trifluoromethyl oxazoles

ortho-Nitro-substituted N-trifluoroacetyl imino-λ³-iodane is a bench-stable trifluoroacetyl nitrene precursor, in which intra- and intermolecular halogen bonding (XB) plays an important role. Potential synthetic applications of this novel precursor were explored.

Enantioselective Intermolecular C-H Amination Directed by a Chiral Cation

The enantioselective amination of C(sp³)-H bonds is a powerful synthetic transformation yet highly challenging to achieve in an intermolecular sense. We have developed a family of anionic variants of the best-in-class catalyst for Rh-catalyzed C-H amination, Rh₂(esp)₂, with which we have associated chiral cations derived from quaternized cinchona alkaloids. These ion-paired catalysts enable high levels of enantioselectivity to be achieved in the benzylic C-H amination of substrates bearing pendant hydroxyl groups. Additionally, the quinoline of the chiral cation appears to engage in axial ligation to the rhodium complex, providing improved yields of product versus Rh₂(esp)₂ and highlighting the dual role that the cation is playing. These results underline the potential of using chiral cations to control enantioselectivity in challenging transition-metal-catalyzed transformations.

Rh(III)-Catalyzed allylic C-H amidation of unactivated alkenes with in situ generated iminoiodinanes

Rh(iii)-catalyzed allylic C-H amidation of substituted alkenes with in situ generated iminoiodinanes is demonstrated. The presented protocol is compatible with differently functionalized unactivated terminal alkenes and internal alkenes. In terminal alkenes, branch selectivity was observed exclusively. Based on the detailed mechanistic investigation, a possible reaction mechanism involving the in situ generated π-allyl as well as metal-nitrene intermediates has been proposed.

Nitrene transfer catalysts for enantioselective C–N bond formation

Transition-metal-catalysed, non-enzymatic transformations of C-H and C=C bonds to C-N bonds through nitrene transfer (NT) are powerful synthetic tools to prepare valuable amine building blocks. Although the first examples of racemic NT were reported more than 50 years ago, catalysts that mediate enantioselective NT with a broad substrate scope have been slow to emerge. However, the past ten years have seen the discovery of several first-row, second-row and third-row transition metal catalysts for asymmetric NT. This Review covers recent developments in asymmetric aziridination and C-H bond amination reactions. We describe catalyst design principles, re-evaluate traditional catalyst architectures, show how the scope of nitrene precursors has expanded and present new mechanistic insights. Following this, we highlight remaining opportunities and challenges to developing more practical and general synthetic methodologies. Realizing chemoselective, site-selective and enantioselective intermolecular NT will streamline amine synthesis and allow us to explore new chemical space.

Is the Electrophilicity of the Metal Nitrene the Sole Predictor of Metal-Mediated Nitrene Transfer to Olefins? Secondary Contributing Factors as Revealed by a Library of High-Spin Co(II) Reagents

Recent research has highlighted the key role played by the electron affinity of the active metal-nitrene/imido oxidant as the driving force in nitrene additions to olefins to afford valuable aziridines. The present work showcases a library of Co(II) reagents that, unlike the previously examined Mn(II) and Fe(II) analogues, demonstrate reactivity trends in olefin aziridinations that cannot be solely explained by the electron affinity criterion. A family of Co(II) catalysts (17 members) has been synthesized with the assistance of a trisphenylamido-amine scaffold decorated by various alkyl, aryl, and acyl groups attached to the equatorial amidos. Single-crystal X-ray diffraction analysis, cyclic voltammetry and EPR data reveal that the high-spin Co(II) sites (S = 3/2) feature a minimal [N3N] coordination and span a range of 1.4 V in redox potentials. Surprisingly, the Co(II)-mediated aziridination of styrene demonstrates reactivity patterns that deviate from those anticipated by the relevant electrophilicities of the putative metal nitrenes. The representative L4Co catalyst (-COCMe3 arm) is operating faster than the L8Co analogue (-COCF3 arm), in spite of diminished metal-nitrene electrophilicity. Mechanistic data (Hammett plots, KIE, stereocontrol studies) reveal that although both reagents follow a two-step reactivity path (turnover-limiting metal-nitrene addition to the C b atom of styrene, followed by product-determining ring-closure), the L4Co catalyst is associated with lower energy barriers in both steps. DFT calculations indicate that the putative [L4Co]NTs and [L8Co]NTs species are electronically distinct, inasmuch as the former exhibits a single-electron oxidized ligand arm. In addition, DFT calculations suggest that including London dispersion corrections for L4Co (due to the polarizability of the tert-Bu substituent) can provide significant stabilization of the turnover-limiting transition state. This study highlights how small ligand modifications can generate stereoelectronic variants that in certain cases are even capable of overriding the preponderance of the metal-nitrene electrophilicity as a driving force.