Transiently thermoresponsive polymers and their applications in biomedicine

Zwitterionic nanoparticles for thermally activated drug delivery in hyperthermia cancer treatment

Hyperthermia is considered a promising strategy to boost the curative outcome of traditional chemotherapeutic treatments. However, this thermally mediated drug delivery is still affected by important limitations. First, the poor accumulation of the conventional anticancer formulations in the target site limits the bioavailability of the active ingredient and induces off-site effects. In addition, some tumoral scenarios, such as ovarian carcinoma, are characterized by cell thermotolerance, which induces tumoral cells to activate self-protecting mechanisms against high temperatures. To overcome these constraints, we developed thermoresponsive nanoparticles (NPs) with an upper critical solution temperature (UCST) to intracellularly deliver a therapeutic payload and release it on demand through hyperthermia stimulation. These NPs were synthesized via reversible addition-fragmentation chain transfer (RAFT) emulsion polymerization and combine polyzwitterionic stabilizing segments and an oligoester-based biodegradable core. By leveraging the pseudo-living nature of RAFT polymerization, important physicochemical properties of the NPs were controlled and optimized, including their cloud point (Tcp) and size. We have tuned the Tcp of NPs to match the therapeutic needs of hyperthermia treatments at 43 °C and tested the nanocarriers in the controlled delivery of paclitaxel, a common anticancer drug. The NPs released almost entirely the encapsulated drug only following 1 h incubation at 43 °C, whereas they retained more than 95% of the payload in the physiological environment (37 °C), thus demonstrating their efficacy as on-demand drug delivery systems. The administration of drug-loaded NPs to ovarian cancer cells led to therapeutic effects outperforming the conventional administration of non-encapsulated paclitaxel, which highlights the potential of the zwitterionic UCST-type NPs as an innovative hyperthermia-responsive drug delivery system.

Thermosensitive polymer prodrug nanoparticles prepared by an all-aqueous nanoprecipitation process and application to combination therapy

Despite their great versatility and ease of functionalization, most polymer-based nanocarriers intended for use in drug delivery often face serious limitations that can prevent their clinical translation, such as uncontrolled drug release and off-target toxicity, which mainly originate from the burst release phenomenon. In addition, residual solvents from the formulation process can induce toxicity, alter the physico-chemical and biological properties and can strongly impair further pharmaceutical development. To address these issues, we report polymer prodrug nanoparticles, which are prepared without organic solvents via an all-aqueous formulation process, and provide sustained drug release. This was achieved by the "drug-initiated" synthesis of well-defined copolymer prodrugs exhibiting a lower critical solution temperature (LCST) and based on the anticancer drug gemcitabine (Gem). After screening for different structural parameters, prodrugs based on amphiphilic diblock copolymers were formulated into stable nanoparticles by all-aqueous nanoprecipitation, with rather narrow particle size distribution and average diameters in the 50-80 nm range. They exhibited sustained Gem release in human serum and acetate buffer, rapid cellular uptake and significant cytotoxicity on A549 and Mia PaCa-2 cancer cells. We also demonstrated the versatility of this approach by formulating Gem-based polymer prodrug nanoparticles loaded with doxorubicin (Dox) for combination therapy. The dual-drug nanoparticles exhibited sustained release of Gem in human serum and acidic release of Dox under accelerated pathophysiological conditions. Importantly, they also induced a synergistic effect on triple-negative breast cancer line MDA-MB-231, which is a relevant cell line to this combination.

Surface Topology of Redox- and Thermoresponsive Nanogel Droplets

Hydrogels are usually depicted as a homogenous polymer block with a distinct surface. While defects in the polymer structure are looked into frequently, structural irregularities on the hydrogel surface are often neglected. In this work, thin hydrogel layers of ≈100 nm thickness (nanogels) are synthesized and characterized for their structural irregularities, as they represent the surface of macrogels. The nanogels contain a main-chain responsiveness (thermo responsive) and a responsiveness in the cross-linking points (redox responsive). By combining data from ellipsometry using box-model and two-segment-model analysis, as well as atomic force microscopy, a more defined model of the nanogel surface can be developed. Starting with a more densely cross-linked network at the silica wafer surface, the density of cross-linking gradually decreases toward the hydrogel-solvent interface. Thermo-responsive behavior of the main chain affects the entire network equally as all chain segments change solubility. Cross-linker-based redox-responsiveness, on the other hand, is only governed by the inner, more cross-linked layers of the network. Such dual responsive nanogels hence allow for developing a more detailed model of a hydrogel surface from free radical polymerization. It provides a better understanding of structural defects in hydrogels and how they are affected by responsive functionalities.

Fluorinated Organic Polymers for Cancer Drug Delivery

In the realm of cancer therapy, the spotlight is on nanoscale pharmaceutical delivery systems, especially polymer-based nanoparticles, for their enhanced drug dissolution, extended presence in the bloodstream, and precision targeting achieved via surface engineering. Leveraging the amplified permeation and retention phenomenon, these systems concentrate therapeutic agents within tumor tissues. Nonetheless, the hurdles of systemic toxicity, biological barriers, and compatibility with living systems persist. Fluorinated polymers, distinguished by their chemical idiosyncrasies, are poised for extensive biomedical applications, notably in stabilizing drug metabolism, augmenting lipophilicity, and optimizing bioavailability. Material science heralds the advent of fluorinated polymers that, by integrating fluorine atoms, unveil a suite of drug delivery merits: the hydrophobic traits of fluorinated alkyl chains ward off lipid or protein disruption, the carbon-fluorine bond's stability extends the drug's lifecycle in the system, and a lower alkalinity coupled with a diminished ionic charge bolsters the drug's ability to traverse cellular membranes. This comprehensive review delves into the utilization of fluorinated polymers for oncological pharmacotherapy, elucidating their molecular architecture, synthetic pathways, and functional attributes, alongside an exploration of their empirical strengths and the quandaries they encounter in both experimental and clinical settings.

Glycerol-based sustainably sourced resin for volumetric printing

Volumetric Additive Manufacturing (VAM) represents a revolutionary advancement in the field of Additive Manufacturing, as it allows for the creation of objects in a single, cohesive process, rather than in a layer-by-layer approach. This innovative technique offers unparalleled design freedom and significantly reduces printing times. A current limitation of VAM is the availability of suitable resins with the required photoreactive chemistry and from sustainable sources. To support the application of this technology, we have developed a sustainable resin based on polyglycerol, a bioderived (e.g., vegetable origin), colourless, and easily functionisable oligomer produced from glycerol. To transform polyglycerol-6 into an acrylate photo-printable resin we adopted a simple, one-step, and scalable synthesis route. Polyglycerol-6-acrylate fulfils all the necessary criteria for volumetric printing (transparency, photo-reactivity, viscosity) and was successfully used to print a variety of models with intricate geometries and good resolution. The waste resin was found to be reusable with minimal performance issues, improving resin utilisation and minimising waste material. Furthermore, by incorporating dopants such as poly(glycerol) adipate acrylate (PGA-A) and 10,12-pentacosadyinoic acid (PCDA), we demonstrated the ability to print objects with a diverse range of functionalities, including temperature sensing probes and a polyester excipient, highlighting the potential applications of these new resins.

Thermo-Responsive Hydrogels Coupled with Photothermal Agents for Biomedical Applications

Intelligent hydrogels are materials with abilities to change their chemical nature or physical structure in response to external stimuli showing promising potential in multitudinous applications. Especially, photo-thermo coupled responsive hydrogels that are prepared by encapsulating photothermal agents into thermo-responsive hydrogel matrix exhibit more attractive advantages in biomedical applications owing to their spatiotemporal control and precise therapy. This work summarizes the latest progress of the photo-thermo coupled responsive hydrogel in biomedical applications. Three major elements of the photo-thermo coupled responsive hydrogel, i.e., thermo-responsive hydrogel matrix, photothermal agents, and construction methods are introduced. Furthermore, the recent developments of these hydrogels for biomedical applications are described with some selected examples. Finally, the challenges and future perspectives for photo-thermo coupled responsive hydrogels are outlined.

Polymeric nanoparticles for DNA vaccine-based cancer immunotherapy: a review

Cancer is one of the leading causes of death and mortality in the world. There is an essential need to develop new drugs or therapeutic approaches to manage treatment-resistant cancers. Cancer immunotherapy is a type of cancer treatment that uses the power of the body's immune system to prevent, control, and eliminate cancer. One of the materials used as a vaccine in immunotherapy is DNA. The application of polymeric nanoparticles as carriers for DNA vaccines could be an effective therapeutic approach to activate immune responses and increase antigen presentation efficiency. Various materials have been used as polymeric nanoparticles, including: chitosan, poly (lactic-co-glycolic acid), Polyethylenimine, dendrimers, polypeptides, and polyesters. Application of these polymer nanoparticles has several advantages, including increased vaccine delivery, enhanced antigen presentation, adjuvant effects, and more sustainable induction of the immune system. Besides many clinical trials and commercial products that were developed based on polymer nanoparticles, there is still a need for more comprehensive studies to increase the DNA vaccine efficiency in cancer immunotherapy using this type of carrier.

Temperature-Sensitive Hydrogels as Carriers for Modulated Delivery of Acetaminophen

The purposes of this study are the polymerization of temperature-sensitive copolymers based on N-isopropyl acrylamide and 10 mol % of 2-hydroxypropylmethacrylate, characterisations of their thermal, morphological and swelling properties, as well as the analysis of potential application in drug-delivery systems. Acetaminophen, the representative of non-steroidal anti-inflammatory drugs, was used as a model drug in this study. It is a common pain relief drug, which is also used for fever treatment. However, oral administration comes with certain health risks, mainly the overdose and frequent administration of up to four times a day. The goal of applying temperature-sensitive hydrogel is to enable extended administration once a day, depending on the body temperature. The swelling behavior of the obtained poly(N-isopropyl acrylamide-co-2-hydroxypropylmethacrylate) (p(NIPA/HPMA)) hydrogels and their temperature-sensitivity, kinetics and order of swelling processes at 18 and 38 °C were analyzed. The thermal properties of these hydrogels were observed by the DSC method, and the obtained thermograms showed both melting and glass transitions. The drug delivery system of p(NIPA/HPMA) hydrogels with loaded acetaminophen was analyzed using scanning electron microscopy and Fourier transform infrared spectroscopy methods. Structural analysis of FTIR spectra indicates that non-covalent intermolecular interactions of the type of hydrogen bonds were formed among functional groups of acetaminophen and side-chains of p(NIPA/HPMA) hydrogels. The surface structure of p(NIPA/HPMA) hydrogels after drug loading indicates the acetaminophen presence into the pores of the hydrogel network, and their loading efficiency was higher than 92%. Qualitative and quantitative analysis of acetaminophen, determined by the high-pressure liquid chromatography method, showed that about 90-99% of the loaded amount was released from p(NIPA/HPMA) hydrogels within 24 h. Kinetic parameters of the acetaminophen release under simulated gastrointestinal conditions were determined. Based on obtained results, the drug delivery system of temperature-sensitive p(NIPA/HPMA) hydrogels with loaded acetaminophen could be suitable for additional investigation for modulated drug administration, e.g., for extended drug administration.

Research Progress on Stimulus-Responsive Polymer Nanocarriers for Cancer Treatment

As drug carriers for cancer treatment, stimulus-responsive polymer nanomaterials are a major research focus. These nanocarriers respond to specific stimulus signals (e.g., pH, redox, hypoxia, enzymes, temperature, and light) to precisely control drug release, thereby improving drug uptake rates in cancer cells and reducing drug damage to normal cells. Therefore, we reviewed the research progress in the past 6 years and the mechanisms underpinning single and multiple stimulus-responsive polymer nanocarriers in tumour therapy. The advantages and disadvantages of various stimulus-responsive polymeric nanomaterials are summarised, and the future outlook is provided to provide a scientific and theoretical rationale for further research, development, and utilisation of stimulus-responsive nanocarriers.

IR780-doped cobalt ferrite nanoparticles@poly(ethylene glycol) microgels as dual-enzyme immobilized micro-systems: Preparations, photothermal-responsive dual-enzyme release, and highly efficient recycling

To solve the problems of separating dual enzymes from the carriers of dual-enzyme immobilized micro-systems and greatly increase the carriers' recycling times, photothermal-responsive micro-systems of IR780-doped cobalt ferrite nanoparticles@poly(ethylene glycol) microgels (CFNPs-IR780@MGs) are prepared. A novel two-step recycling strategy is proposed based on the CFNPs-IR780@MGs. First, the dual enzymes and the carriers are separated from the reaction system as a whole via magnetic separation. Second, the dual enzymes and the carriers are separated through photothermal-responsive dual-enzyme release so that the carriers can be reused. Results show that CFNPs-IR780@MGs is 281.4 ± 9.6 nm with a shell of 58.2 nm, and the low critical solution temperature is 42 °C, and the photothermal conversion efficiency increases from 14.04% to 58.41% by doping 1.6% of IR780 into the CFNPs-IR780 clusters. The dual-enzyme immobilized micro-systems and the carriers are recycled 12 and 72 times, respectively, and the enzyme activity remains above 70%. The micro-systems can realize whole recycling of the dual enzymes and carriers and further recycling of the carriers, thus providing a simple and convenient recycling method for dual-enzyme immobilized micro-systems. The findings reveal the micro-systems' important application potential in biological detection and industrial production.

Assessment of temperature-sensitive properties of ionically crosslinked sodium alginate/hydroxypropyl cellulose blend microspheres: preparation, characterization, and in vitro release of paracetamol

Today, polymer systems can be formed to respond to single stimuli or multiple stimuli by changing their properties. The use of these systems, which are designed to be sensitive to stimuli, is expanding in a wide range of applications. Herein, microspheres of sodium alginate (NaAlg) and hydroxypropyl cellulose (HPC) sensitive to dual stimuli for the controlled release of model drug paracetamol were produced by the ionotropic gelation method in the presence of Zn²⁺ ions. FTIR, DSC, TGA, SEM, and particle size measurements were used to describe the blend microspheres. Low critical solution temperatures (LCST) of polymer blends at different ratios were determined and the biggest change according to the LCST value of HPC was found to be approximately 1-2 °C lower than 41 °C in microspheres with a NaAlg/HPC ratio of 50/50. In vitro release experiments of paracetamol from microspheres were carried out in a gastrointestinal tract simulation environment at two different temperatures (37 °C and 47 °C). From the release profiles, paracetamol release varied depending on the NaAlg/HPC ratio, the paracetamol content in the microspheres, the exposure time to Zn²⁺ ions, and the pH of the medium. Among the microsphere formulations, the highest entrapment efficiency was 57.86%, obtained for B₇ formulation microspheres with a NaAlg/HPC ratio of 70/30, a paracetamol loading percentage of 20%, and a crosslinking time of 5 min.RESEARCH HIGHLIGHTSMicrospheres of sodium alginate (NaAlg) and hydroxypropyl cellulose (HPC) sensitive to dual stimuli for the controlled release of model drug paracetamol were produced by the ionotropic gelation method in the presence of Zn²⁺ ions.LCST values of the microspheres with a NaAlg/HPC ratio of 50/50 were significantly lower by 1-2 °C than the LCST value of HPC, and the release results supported the temperature sensitivity of the microspheres.Among the microsphere formulations, the highest entrapment efficiency was 57.86% obtained for B₇ formulation microspheres.These microspheres can be used as a temperature-sensitive drug delivery system in the biomedical field and also as an encapsulation system of cancer drugs for cancer treatment modalities such as hyperthermia.

Thermoresponsive Hydrogel-Enabled Thermostatic Photothermal Therapy for Enhanced Healing of Bacteria-Infected Wounds

Photothermal therapy (PTT) has emerged as an attractive technique for the treatment of bacterial infections. However, the uncontrolled heat generation in conventional PTT inevitably causes thermal damages to healthy tissues and/or organs. It is thus essential to develop a smart and universal strategy to regulate the photothermal equilibrium temperature to a preset safe threshold. Herein, a thermoresponsive hydrogel-enabled thermostatic PTT system for enhanced healing of bacteria-infected wounds is reported. In this system, the near-infrared (NIR)-triggered heat generation by photothermal nanomaterials is spontaneously transferred to a thermoresponsive hydrogel with a lower critical solution temperature (LCST), leading to its rapid phase transition by forming considerable light-scattering centers to block NIR penetration. Such a dynamic and reversible process automatically regulates the photothermal equilibrium temperature to the phase-transition point of the LCST-type hydrogel. In contrast to temperature-uncontrolled conventional PTT with severe thermal damages, the thermoresponsive hydrogel-enabled thermostatic PTT provides effective protection on healthy tissues and/or organs, which remarkably accelerates wound healing by efficient bacterial eradication. This study establishes a smart, simple and universal PTT platform, holding great promise in the safe and efficient treatment of bacterial skin infections.

Nanomaterials based on thermosensitive polymer in biomedical field

The progress of nanotechnology enables us to make use of the special properties of materials on the nanoscale and open up many new fields of biomedical research. Among them, thermosensitive nanomaterials stand out in many biomedical fields because of their “intelligent” behavior in response to temperature changes. However, this article mainly reviews the research progress of thermosensitive nanomaterials, which are popular in biomedical applications in recent years. Here, we simply classify the thermally responsive nanomaterials according to the types of polymers, focusing on the mechanisms of action and their advantages and potential. Finally, we deeply investigate the applications of thermosensitive nanomaterials in drug delivery, tissue engineering, sensing analysis, cell culture, 3D printing, and other fields and probe the current challenges and future development prospects of thermosensitive nanomaterials.

Programed Thermoresponsive Polymers with Cleavage-Induced Phase Transition

A new programed upper critical solution temperature-type thermoresponsive polymer was developed using water-soluble anionic polymer conjugates derived from polyallylamine and phthalic acid with cleavage-induced phase transition property. Intrinsic charge inversion from anion to cation of the polymer side chain is induced through a side chain cleavage reaction in acidic aqueous media. With the progress of side chain cleavage under fixed external conditions, the polymer conjugates express a thermoresponsive property, followed by shifting a phase boundary due to the change in polymer composition. When the phase transition boundary eventually reached the examined temperature, phase transition occurs under fixed external conditions. Such new insight obtained in this study opens up the new concept of time-programed stimuli-responsive polymer possessing a cleavage-induced phase transition.

Nature-Derived Okra Gel as Strong Hemostatic Bioadhesive in Human Blood, Liver, and Heart Trauma of Rabbits and Dogs

Bioadhesive performance can be compromised due to bleeding. Bleeding increases mortality. Adhesives with hemostatic function are of great significance. A sustainable and robust hemostatic bioadhesive from okra is reported. The adhesive strength reaches around three and six-fold higher than commercial fibrin on pigskin and glass, respectively. The okra gel presents high-pressure resistance and great underwater adhesive strength. In human blood experiments, the okra gel can activate platelets, enhance the adhesion of activated platelets, and release coagulation factors XI and XII. By forming a fast gel layer and closely adhering to the wound, it can quickly stop bleeding in the liver and heart of rabbits and dogs. Meanwhile, okra gel can cause platelet activation at the wound site and further strengthen its hemostatic performance. It is biocompatible, biodegradable, and can promote wound healing and shows potential as a sustainable bioadhesive, especially in the scenario of significant hemorrhage.

Hypothermia-Triggered Mesoporous Silica Particles for Controlled Release of Hydrogen Sulfide to Reduce the I/R Injury of the Myocardium

Despite the fact that heart transplantation (HTx) is a relatively mature procedure, heart ischemic and reperfusion (I/R) injury during HTx remains a challenge. Even after a successful operation, the heart will be at risk of primary graft failure and mortality during the first year. In this study, temperature-sensitive polymer poly(N-n-propylacrylamide-co-N-tert-butyl acrylamide) (PNNTBA) was coated on diallyl trisulfide (DATS)-loaded mesoporous silica nanoparticles (DATS-MSN) to synthesize hypothermia-triggered hydrogen sulfide (H₂S) releasing particles (HT-MSN). Because the PNNTBA shell dissolves in phosphate-buffered saline at 4 °C, the loaded DATS could continuously release H₂S within 6 h when activated by glutathione (GSH). Furthermore, after co-culturing biocompatible HT-MSN with cardiomyocytes, H₂S released from HT-MSN at 4 °C was found to protect cardiomyocytes from ischemic and reperfusion (I/R) injury. In detail, the rate of cell apoptosis and lactate dehydrogenase activity was decreased, as manifested by increased BCL-2 expression and decreased BAX expression. More importantly, in an isolated heart preservation experiment, HT-MSN demonstrated potent protection against cardiac I/R injury and reduced expression of inflammatory factors TNF-α and IL-1β. This study provided a new method for the controlled release of H₂S by the donor and myocardial protection from I/R injury.

Log Poct/SA Predicts the Thermoresponsive Behavior of P(DMA-co-RA) Statistical Copolymers

Polymers that exhibit a lower critical solution temperature (LCST) have been of great interest for various biological applications such as drug or gene delivery, controlled release systems, and biosensing. Tuning the LCST behavior through control over polymer composition (e.g., upon copolymerization of monomers with different hydrophobicity) is a widely used method, as the phase transition is greatly affected by the hydrophilic/hydrophobic balance of the copolymers. However, the lack of a general method that relates copolymer hydrophobicity to their temperature response leads to exhaustive experiments when seeking to obtain polymers with desired properties. This is particularly challenging when the target copolymers are comprised of monomers that individually form nonresponsive homopolymers, that is, only when copolymerized do they display thermoresponsive behavior. In this study, we sought to develop a predictive relationship between polymer hydrophobicity and cloud point temperature (T_CP). A series of statistical copolymers were synthesized based on hydrophilic N,N-dimethyl acrylamide (DMA) and hydrophobic alkyl acrylate monomers, and their hydrophobicity was compared using surface area-normalized octanol/water partition coefficients (Log P_oct/SA). Interestingly, a correlation between the Log P_oct/SA of the copolymers and their T_CPs was observed for the P(DMA-co-RA) copolymers, which allowed T_CP prediction of a demonstrative copolymer P(DMA-co-MMA). These results highlight the strong potential of this computational tool to improve the rational design of copolymers with desired temperature responses prior to synthesis.

Molecular bases for temperature sensitivity in supramolecular assemblies and their applications as thermoresponsive soft materials

Thermoresponsive supramolecular assemblies have been extensively explored in diverse formats, from injectable hydrogels to nanoscale carriers, for a variety of applications including drug delivery, tissue engineering and thermo-controlled catalysis. Understanding the molecular bases behind thermal sensitivity of materials is fundamentally important for the rational design of assemblies with optimal combination of properties and predictable tunability for specific applications. In this review, we summarize the recent advances in this area with a specific focus on the parameters and factors that influence thermoresponsive properties of soft materials. We summarize and analyze the effects of structures and architectures of molecules, hydrophilic and lipophilic balance, concentration, components and external additives upon the thermoresponsiveness of the corresponding molecular assemblies.

Dendronized Gelatins Showing Both LCST and UCST-type Thermoresponsive Behavior

Modification of natural polymers with stimuli-responsive synthetic moieties witnesses convergences of superior properties from natural polymers and stimuli-responsiveness to generate new intelligent materials. This was usally performed through synthetic polymers...

Precision synthesis for well-defined linear and/or architecturally controlled thermoresponsive poly(N-substituted acrylamide)s

We describe the progress in precision polymerizations of specific kinds of N-alkylacrylamides and N,N-dialkylacrylamides to produce polymers showing thermoresponsive properties in aqueous media, which representatively include the reversible-deactivation radical polymerizations...

Thermo-Gelling Dendronized Chitosans as Biomimetic Scaffolds for Corneal Tissue Engineering

Biomimetic scaffolds with transparent, biocompatible, and in situ-forming properties are highly desirable for corneal tissue engineering, which can deeply fill corneal stromal defects with irregular shapes and support tissue regeneration. We here engineer a novel class of corneal scaffolds from oligoethylene glycol (OEG)-based dendronized chitosans (DCs), whose aqueous solutions show intriguing sol-gel transitions triggered by physiological temperature, resulting in highly transparent hydrogels. Gelling points of these hydrogels can be easily tuned, and furthermore, their mechanical strengths can be significantly enhanced when injected into PBS at 37 °C instead of pure water. In vitro tests indicate that these DC hydrogels exhibit excellent biocompatibility and can promote proliferation and migration of keratocyte. When applied in the rabbit eyes with corneal stromal defects, in situ formed DC hydrogels play a positive effect for new tissue regeneration. Overall, this thermo-gelling DCs possess appealing features as corneal tissue substitutes with their excellent biocompatibility and unprecedented thermoresponsiveness.

Magnetic nanoparticles and clusters for magnetic hyperthermia: optimizing their heat performance and developing combinatorial therapies to tackle cancer

Magnetic hyperthermia (MHT) is a therapeutic modality for the treatment of solid tumors that has now accumulated more than 30 years of experience. In the ongoing MHT clinical trials for the treatment of brain and prostate tumors, iron oxide nanoparticles are employed as intra-tumoral MHT agents under a patient-safe 100 kHz alternating magnetic field (AMF) applicator. Although iron oxide nanoparticles are currently approved by FDA for imaging purposes and for the treatment of anemia, magnetic nanoparticles (MNPs) designed for the efficient treatment of MHT must respond to specific physical-chemical properties in terms of magneto-energy conversion, heat dose production, surface chemistry and aggregation state. Accordingly, in the past few decades, these requirements have boosted the development of a new generation of MNPs specifically aimed for MHT. In this review, we present an overview on MNPs and their assemblies produced via different synthetic routes, focusing on which MNP features have allowed unprecedented heating efficiency levels to be achieved in MHT and highlighting nanoplatforms that prevent magnetic heat loss in the intracellular environment. Moreover, we review the advances on MNP-based nanoplatforms that embrace the concept of multimodal therapy, which aims to combine MHT with chemotherapy, radiotherapy, immunotherapy, photodynamic or phototherapy. Next, for a better control of the therapeutic temperature at the tumor, we focus on the studies that have optimized MNPs to maintain gold-standard MHT performance and are also tackling MNP imaging with the aim to quantitatively assess the amount of nanoparticles accumulated at the tumor site and regulate the MHT field conditions. To conclude, future perspectives with guidance on how to advance MHT therapy will be provided.

Thermoresponsive Polymers Based on Tertiary Amine Moieties

Thermoresponsive polymers exhibiting unique reversible phase transition properties in aqueous solution in response to temperature stimuli have been extensively investigated. In the past two decades, thermoresponsive polymers based on tertiary amine moieties have achieved considerable progress and become an important family of thermoresponsive polymers, including tertiary amine functionalized poly((meth)acrylamide)s, poly((meth)acrylate)s, poly(styrene)s, poly(vinyl alcohol)s, and poly(ethylene oxide)s, which exhibit lower critical solution temperature and/or upper critical solution temperature in water or aliphatic alcohols. Their phase transition behavior can be modulated by the solution pH and CO₂ due to the protonation of tertiary amine moieties in acidic condition and deprotonation in alkaline condition and the charged ammonium bicarbonate formed by the tertiary amine moieties and CO₂ . The aim of this review is to summarize the recent progress in the thermoresponsive polymers based on tertiary amine moieties.

Effects of cosolvent partitioning on conformational transitions and tethered chain flexibility in spherical polymer brushes

In this work, based on the framework of preferential adsorption concept and analytical self-consistent field (SCF) theory, a model is proposed to investigate the reentrant transition experimentally observed from the thermoresponsive spherical brush in a series of aqueous alcohol solutions. The interaction between monomers is incorporated into the model. Conformational transitions of the spherical brush are quantitatively correlated to the physical parameters, including the number of adsorbed cosolvents which facilitates the solvent quality, the number of cosolvent bridges which drives the brush collapse, as well as their partition coefficients between the brush and the bulk solution. An analytical formula for the number of Kuhn segments per tethered chain is obtained based on the analytical SCF theory, which elucidates the flexibility of tethered chains in the intricate system of multicomponents involving the conformational transitions. Under the experimental conditions associated with the cosolvent-brush interaction, the variation of the monomer chemical potential with the monomer concentration indicates that the monomer distribution of the spherical brush remains continuous. The analysis based on the SFC theory also reveals that the distribution of adsorbed cosolvents is a positive parabola while the distribution of cosolvent bridges appears to be an exponential decay function, implying that the intervening space between tethered chains, rather than the number of adsorbed cosolvents, plays a crucial role in forming the cosolvent bridge. We demonstrate that the model formulated for the reentrant transition under weaker cosolvent-brush interactions provides guidelines for the one under stronger nanoparticle-brush interactions.

Recent Advances in Thermoresponsive OEGylated Poly(amino acid)s

Thermoresponsive polymers have been widely studied in the past decades due to their potential applications in biomedicine, nanotechnology, and so on. As is known, poly(N-isopropylacrylamide) (PNIPAM) and poly(oligo(ethylene glycol)methacrylates) (POEGMAs) are the most popular thermoresponsive polymers, and have been studied extensively. However, more advanced thermoresponsive polymers with excellent biocompatibility, biodegradability, and bioactivity also need to be developed for biomedical applications. OEGylated poly(amino acid)s are a kind of novel polymer which are synthesized by attaching one or multiple oligo(ethylene glycol) (OEG) chains to poly(amino acid) (PAA).These polymers combine the great solubility of OEG, and the excellent biocompatibility, biodegradability and well defined secondary structures of PAA. These advantages allow them to have great application prospects in the field of biomedicine. Therefore, the study of OEGylated poly(amino acid)s has attracted more attention recently. In this review, we summarized the development of thermoresponsive OEGylated poly(amino acid)s in recent years, including the synthesis method (such as ring-opening polymerization, post-polymerization modification, and Ugi reaction), stimuli-response behavior study, and secondary structure study. We hope that this periodical summary will be more conducive to design, synthesis and application of OEGylated poly(amino acid)s in the future.

Effect of Host-Guest Complexation on the Thermoresponsive Behavior of Poly(oligo ethylene glycol acrylate)s Functionalized with Dialkoxynapththalene Guest Side Chains

The combination of thermoresponsive polymers with supramolecular host-guest interactions enables accurate tuning of the phase transition temperature, while also providing additional response mechanisms based on host-guest complexation. Most studies focused on a single thermoresponsive polymer to demonstrate the effect of host-guest complexation on the responsive behavior. In this work, the effect of the polymer structure on the host-guest complexation and thermoresponsive behavior is reported. Therefore, different poly(oligoethylene glycol acrylate)s, namely, poly(2-hydroxyethylacrylate) (PHEA), poly(methoxy diethylene glycol acrylate), poly(methoxy triethylene glycol acrylate), and poly(methoxy tetraethylene glycol acrylate), are synthesized functionalized with 1,5-dialkoxynaphthalene guest molecules in the side chain. Their complexation with the cyclobis(paraquat-p-phenylene) tetrachloride host is studied to understand the effect of polymer structure on the supramolecular association and the polymer phase transition, revealing that the oligoethylene glycol side chains lead to weaker host-guest complexation and also have a smaller increase in the cloud point temperature compared to PHEA.

Exploration of Bioengineered Scaffolds Composed of Thermo-Responsive Polymers for Drug Delivery in Wound Healing

Innate and adaptive immune responses lead to wound healing by regulating a complex series of events promoting cellular cross-talk. An inflammatory response is presented with its characteristic clinical symptoms: heat, pain, redness, and swelling. Some smart thermo-responsive polymers like chitosan, polyvinylpyrrolidone, alginate, and poly(ε-caprolactone) can be used to create biocompatible and biodegradable scaffolds. These processed thermo-responsive biomaterials possess 3D architectures similar to human structures, providing physical support for cell growth and tissue regeneration. Furthermore, these structures are used as novel drug delivery systems. Locally heated tumors above the polymer lower the critical solution temperature and can induce its conversion into a hydrophobic form by an entropy-driven process, enhancing drug release. When the thermal stimulus is gone, drug release is reduced due to the swelling of the material. As a result, these systems can contribute to the wound healing process in accelerating tissue healing, avoiding large scar tissue, regulating the inflammatory response, and protecting from bacterial infections. This paper integrates the relevant reported contributions of bioengineered scaffolds composed of smart thermo-responsive polymers for drug delivery applications in wound healing. Therefore, we present a comprehensive review that aims to demonstrate these systems' capacity to provide spatially and temporally controlled release strategies for one or more drugs used in wound healing. In this sense, the novel manufacturing techniques of 3D printing and electrospinning are explored for the tuning of their physicochemical properties to adjust therapies according to patient convenience and reduce drug toxicity and side effects.

Judging Enzyme-Responsive Micelles by Their Covers: Direct Comparison of Dendritic Amphiphiles with Different Hydrophilic Blocks

Enzymatically degradable polymeric micelles have great potential as drug delivery systems, allowing the selective release of their active cargo at the site of disease. Furthermore, enzymatic degradation of the polymeric nanocarriers facilitates clearance of the delivery system after it has completed its task. While extensive research is dedicated toward the design and study of the enzymatically degradable hydrophobic block, there is limited understanding on how the hydrophilic shell of the micelle can affect the properties of such enzymatically degradable micelles. In this work, we report a systematic head-to-head comparison of well-defined polymeric micelles with different polymeric shells and two types of enzymatically degradable hydrophobic cores. To carry out this direct comparison, we developed a highly modular approach for preparing clickable, spectrally active enzyme-responsive dendrons with adjustable degree of hydrophobicity. The dendrons were linked with three different widely used hydrophilic polymers—poly(ethylene glycol), poly(2-ethyl-2-oxazoline), and poly(acrylic acid) using the CuAAC click reaction. The high modularity and molecular precision of the synthetic methodology enabled us to easily prepare well-defined amphiphiles that differ either in their hydrophilic block composition or in their hydrophobic dendron. The micelles of the different amphiphiles were thoroughly characterized and their sizes, critical micelle concentrations, drug loading, stability, and cell internalization were compared. We found that the micelle diameter was almost solely dependent on the hydrophobicity of the dendritic hydrophobic block, whereas the enzymatic degradation rate was strongly dependent on the composition of both blocks. Drug encapsulation capacity was very sensitive to the type of the hydrophilic block, indicating that, in addition to the hydrophobic core, the micellar shell also has a significant role in drug encapsulation. Incubation of the spectrally active micelles in the presence of cells showed that the hydrophilic shell significantly affects the micellar stability, localization, cell internalization kinetics, and the cargo release mechanism. Overall, the high molecular precision and the ability of these amphiphiles to report their disassembly, even in complex biological media, allowed us to directly compare the different types of micelles, providing striking insights into how the composition of the micelle shells and cores can affect their properties and potential to serve as nanocarriers.

Adamantane Functionalized Poly(2-oxazoline)s with Broadly Tunable LCST-Behavior by Molecular Recognition

Smart or adaptive materials often utilize stimuli-responsive polymers, which undergo a phase transition in response to a given stimulus. So far, various stimuli have been used to enable the modulation of drug release profiles, cell-interactive behavior, and optical and mechanical properties. In this respect, molecular recognition is a powerful tool to fine-tune the stimuli-responsive behavior due to its high specificity. Within this contribution, a poly(2-oxazoline) copolymer bearing adamantane side chains was synthesized via triazabicyclodecene-catalyzed amidation of the ester side chains of a poly(2-ethyl-2-oxazoline-stat-2-methoxycarbonylpropyl-2-oxazoline) statistical copolymer. Subsequent complexation of the pendant adamantane groups with sub-stoichiometric amounts (0-1 equivalents) of hydroxypropyl β-cyclodextrin or β-cyclodextrin enabled accurate tuning of its lower critical solution temperature (LCST) over an exceptionally wide temperature range, spanning from 30 °C to 56 °C. Furthermore, the sharp thermal transitions display minimal hysteresis, suggesting a reversible phase transition of the complexed polymer chains (i.e., the β-cyclodextrin host collapses together with the polymers) and a minimal influence by the temperature on the supramolecular association. Analysis of the association constant of the polymer with hydroxypropyl β-cyclodextrin via 1H NMR spectroscopy suggests that the selection of the macrocyclic host and rational polymer design can have a profound influence on the observed thermal transitions.

Thermoresponsive Polypeptoids

Stimuli-responsive polymers have been widely studied in many applications such as biomedicine, nanotechnology, and catalysis. Temperature is one of the most commonly used external triggers, which can be highly controlled with excellent reversibility. Thermoresponsive polymers exhibiting a reversible phase transition in a controlled manner to temperature are a promising class of smart polymers that have been widely studied. The phase transition behavior can be tuned by polymer architectures, chain-end, and various functional groups. Particularly, thermoresponsive polypeptoid is a type of promising material that has drawn growing interest because of its excellent biocompatibility, biodegradability, and bioactivity. This paper summarizes the recent advances of thermoresponsive polypeptoids, including the synthetic methods and functional groups as well as their applications.

Designing single trigger/dual-response release and degradation into amine-functional hyperbranched-polydendron nanoprecipitates

The synthesis of complex polymer architectures using relatively facile experimental protocols provides access to materials with the opportunity to control functionality and physical behaviour. The scope of hyperbranched-polydendron chemistries has been expanded here to include primary chains comprising amine-functional 'homopolymer', 'statistical copolymer' and amphiphilic 'block copolymer' analogues using 2-(diethyl amino)ethyl methacrylate, 2-hydroxy propyl methacrylate and t-butyl methacrylate. The different primary chain chemistry and architectures leads to a marked variation in nanoprecipitation behaviour and the response of the resulting amine-functional nanoparticles to varying pH. When acid-sensitive and acid-stable branchers, 1,4-butanediol di(methacryoyloxy)-ethyl ether and ethylene glycol dimethacrylate respectively, are utilised, nanoparticles with encapsulation properties are formed and may be triggered to either release-and-disassemble or release-disassemble-degrade to form a solution of lower molecular weight constituent primary chains.

Revealing the NIR-triggered chemotherapy therapeutic window of magnetic and thermoresponsive nanogels

The combination of magnetic nanoparticles and thermoresponsive nanogels represents an appealing strategy for the development of theranostic probes. These hybrid nanocarriers present several advantages such as outstanding properties for guided therapy, magnetic resonance imaging, and triggered release of encapsulated cargoes. Most magnetic thermoresponsive nanogels are built with strategies that comprise a physical interaction of particles with the polymeric network or the covalent attachment of a single particle to the linear polymer. Herein, we report a facile synthetic approach for the synthesis of magnetic and thermoresponsive nanogels that allows the controlled incorporation of multiple superparamagnetic inorganic cores as covalent cross-linkers. An ultrasonication-assisted precipitation-polymerization afforded nanogels with sizes in the nanometric range and similar magnetization and light transduction properties compared to the discrete magnetic nanoparticles. The theranostic capability of these nanocarriers was further investigated both in vitro and in vivo. In vivo experiments demonstrated the capacity of these materials as nanocarriers for near-infrared (NIR) triggered chemotherapy and highlighted the relevance of the correct concentration/dose in this antitumoral modality to achieve a superior therapeutic efficacy.