Overall reaction mechanism of photocatalytic CO2 reduction on a Re(i)-complex catalyst unit of a Ru(ii)-Re(i) supramolecular photocatalyst

Rhenium(i) complexes fac-[ReI(diimine)(CO)3(L)]n+ are mostly used and evaluated as photocatalysts and catalysts in both photochemical and electrochemical systems for CO2 reduction. However, the selective reduction mechanism of CO2 to CO is unclear, although numerous mechanistic studies have been reported. A Ru(ii)-Re(i) supramolecular photocatalyst with fac-[ReI(diimine)(CO)3{OC(O)OCH2CH2NR2}] (R = C2H4OH) as a catalyst unit (RuC2Re) exhibits very high efficiency, selectivity, and durability of CO formation in photocatalytic CO2 reduction reactions. In this work, the reaction mechanism of photocatalytic CO2 reduction using RuC2Re is fully clarified. Time-resolved IR (TR-IR) measurements using rapid-scan FT-IR spectroscopy with laser flash photolysis verify the formation of RuC2Re(COOH) with a carboxylic acid unit, i.e., fac-[ReI(diimine)(CO)3(COOH)], in the photocatalytic reaction solution. Additionally, this important intermediate is detected in an actual photocatalytic reaction using steady state irradiation. Kinetics analysis of the TR-IR spectra and DFT calculations demonstrated the reaction mechanism of the conversion of the one-electron reduced species of RuC2Re with a fac-[ReI(diimine˙-)(CO)3{OC(O)OCH2CH2NR2}]- unit, which was produced via the photochemical reduction of RuC2Re by 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH), to RuC2Re(COOH). The kinetics of the recovery processes of the starting complex RuC2Re from RuC2Re(COOH) accompanying the release of CO and OH- was also clarified. As a side reaction of RuC2Re(COOH), a long-lived carboxylate-ester complex with a fac-[ReI(diimine)(CO)3(COOC2H4NR2)] unit, which was produced by the nucleophilic attack of TEOA to one of the carbonyl ligands of RuC2Re(CO) with a fac-[ReI(diimine)(CO)4]+ unit, was formed during the photocatalytic reaction. This complex works not only as a precursor in another minor CO formation process but also as an external photosensitiser that photochemically reduces the other complexes i.e., RuC2Re, RuC2Re(COOH), and the intermediate that is reductively converted to RuC2Re(COOH).

Insight into the Photocatalytic Activity of Cobalt-Based Metal–Organic Frameworks and Their Composites

Nowadays, materials with great potential for environmental protection are being sought. Metal–organic frameworks, in particular those with cobalt species as active sites, have drawn considerable interest due to their excellent properties. This review focuses on describing cobalt-based MOFs in the context of light-triggered processes, including dye degradation, water oxidation and splitting, carbon dioxide reduction, in addition to the oxidation of organic compounds. With the use of Co-based MOFs (e.g., ZIF-67, Co-MOF-74) as photocatalysts in these reactions, even over 90% degradation efficiencies of various dyes (e.g., methylene blue) can be achieved. Co-based MOFs also show high TOF/TON values in water splitting processes and CO2-to-CO conversion. Additionally, the majority of alcohols may be converted to aldehydes with efficiencies exceeding 90% and high selectivity. Since Co-based MOFs are effective photocatalysts, they can be applied in the elimination of toxic contaminants that endanger the environment.

Systematic Variation of 3d Metal Centers in a Redox-Innocent Ligand Environment: Structures, Electrochemical Properties, and Carbon Dioxide Activation

Coordination compounds of earth-abundant 3d transition metals are among the most effective catalysts for the electrochemical reduction of carbon dioxide (CO₂). While the properties of the metal center are crucial for the ability of the complexes to electrochemically activate CO₂, systematic variations of the metal within an identical, redox-innocent ligand backbone remain insufficiently investigated. Here, we report on the synthesis, structural and spectroscopic characterization, and electrochemical investigation of a series of 3d transition-metal complexes [M = Mn(I), Fe(II), Co(II), Ni(II), Cu(I), and Zn(II)] coordinated by a new redox-innocent PNP pincer ligand system. Only the Fe, Co, and Ni complexes reveal distinct metal-centered electrochemical reductions from M(II) down to M(0) and show indications for interaction with CO₂ in their reduced states. The Ni(0) d¹⁰ species associates with CO₂ to form a putative Aresta-type Ni-η²-CO₂ complex, where electron transfer to CO₂ through back-bonding is insufficient to enable electrocatalytic activity. By contrast, the Co(0) d⁹ intermediate binding CO₂ can undergo additional electron uptake into a formal cobalt(I) metallacarboxylate complex able to promote turnover. Our data, together with the few literature precedents, single out that an unsaturated coordination sphere (coordination number = 4 or 5) and a d⁷-to-d⁹ configuration in the reduced low oxidation state (+I or 0) are characteristics that foster electrochemical CO₂ activation for complexes based on redox-innocent ligands.

A series of 3d transition-metal complexes (M = Mn, Fe, Co, Ni, Cu, and Zn) coordinated by a new redox-innocent PNP pincer ligand system were synthesized and structurally as well as electrochemically analyzed to illuminate the role of the metal center in molecular electrochemical carbon dioxide (CO₂) activation.

Cobalt-based metal-organic frameworks for the photocatalytic reduction of carbon dioxide

Metal-organic frameworks (MOFs) are porous materials composed of metal centers and organic connectors. They are formed by complexation reactions and exhibit characteristics of both polymers and coordination compounds. They exhibit numerous advantageous features, including a large specific surface area, adjustable pore size/shape, and modifiable pore wall functional groups. Consequently, MOFs have been extensively applied in the photocatalytic reduction of carbon dioxide (CO2). Despite considerable research on cobalt-based MOFs, the photocatalytic reduction of CO2 in the presence of these materials remains challenging. The present review summarizes the current studies concerning the utilization of cobalt-based MOFs in the photocatalytic reduction of CO2. Additionally, approaches used to enhance the catalytic reduction performance are evaluated and the challenges associated with Co-based MOFs are discussed.

Transition Metal Complexes as Catalysts for the Electroconversion of CO2 : An Organometallic Perspective

The electrocatalytic transformation of carbon dioxide has been a topic of interest in the field of CO2 utilization for a long time. Recently, the area has seen increasing dynamics as an alternative strategy to catalytic hydrogenation for CO2 reduction. While many studies focus on the direct electron transfer to the CO2 molecule at the electrode material, molecular transition metal complexes in solution offer the possibility to act as catalysts for the electron transfer. C1 compounds such as carbon monoxide, formate, and methanol are often targeted as the main products, but more elaborate transformations are also possible within the coordination sphere of the metal center. This perspective article will cover selected examples to illustrate and categorize the currently favored mechanisms for the electrochemically induced transformation of CO2 promoted by homogeneous transition metal complexes. The insights will be corroborated with the concepts and elementary steps of organometallic catalysis to derive potential strategies to broaden the molecular diversity of possible products.

Dual roles of the electronic effect on selectivity: pincer nickel-electrocatalyzed CO2 reduction

The unconventional dual roles of the electronic effect on the selectivity are unfolded, i.e., (1) the electronic effect on redox originating from σ-donation and (2) the electronic effect on π-back-donation.

Nanostructured Cobalt-Based Electrocatalysts for CO2 Reduction: Recent Progress, Challenges, and Perspectives

CO₂ reduction reaction (CO₂ RR) provides a promising strategy for sustainable carbon fixation by converting CO₂ into value-added fuels and chemicals. In recent years, considerable efforts are focused on the development of transition-metal (TM)-based catalysts for the selectively electrochemical CO₂ reduction reaction (ECO₂ RR). Co-based catalysts emerge as one of the most promising electrocatalysts with high Faradaic efficiency, current density, and low overpotential, exhibiting excellent catalytic performance toward ECO₂ RR for CO and HCOOH productions that are economically viable. The intrinsic contribution of Co and the synergistic effects in Co-hybrid catalysts play essential roles for future commercial productions by ECO₂ RR. This review summarizes the rational design of Co-based catalysts for ECO₂ RR, including molecular, single-metal-site, and oxide-derived catalysts, along with the nanostructure engineering techniques to highlight the distribution of the ECO₂ RR products by Co-based catalysts. The density functional theory (DFT) simulations and advanced in situ characterizations contribute to interpreting the synergies between Co and other materials for the enhanced product selectivity and catalytic activity. Challenges and outlook concerning the catalyst design and reaction mechanism, including the upgrading of reaction systems of Co-based catalysts for ECO₂ RR, are also discussed.

Tuning Magnetism of Metal Porphyrazine Molecules by a Ferroelectric In2Se3 Monolayer

Electric field tuning of magnetism is highly desirable for nanoelectronics, but volatility in electron spin manipulation presents a major challenge that needs urgent resolution. Here, we show by first-principles calculations that magnetism of metal porphyrazine (MPz) molecules can be effectively tuned by switching ferroelectric polarization of an adjacent In₂Se₃ monolayer. The magnetic moments of TiPz and VPz (MnPz, FePz, and CoPz) decrease (increase) at one polarization but remain unchanged at reversed polarization. This intriguing phenomenon stems from distinct metal d-orbital occupation caused by electron transfer and energy-level shift associated with the polarization switch of the In₂Se₃ monolayer. Moreover, the ferroelectric switch also tunes the underlying electronic properties, producing a metallic, half-metallic, or semiconducting state depending on polarization. These findings of robust ferroelectric tuning of magnetism and related electronic properties in MPz-adsorbed In₂Se₃ hold great promise for innovative design and implementation in advanced magnetic memory storage, sensor, and spintronic devices.

Transition metal-based catalysts for the electrochemical CO2 reduction: from atoms and molecules to nanostructured materials

An overview of the main strategies for the rational design of transition metal-based catalysts for the electrochemical conversion of CO₂, ranging from molecular systems to single-atom and nanostructured catalysts.

Effect of metal ion substitution on the catalytic activity of a pentanuclear metal complex

A pentanuclear cobalt complex that consists of five cobalt ions and six bpp⁻ ligands (Co5, Hbpp = 3,5-bis(2-pyridyl)pyrazole) was newly developed. The obtained complex can catalyze CO₂ reduction under electrochemical and photochemical conditions.

Connecting Solution-Phase to Single-Molecule Properties of Ni(Salophen)

We present a strong correlation of the Ni(salophen) structure and properties measured in single-molecule vs bulk quantities and in ultra high vacuum vs solution phase. Under a scanning tunneling microscope (STM), Ni(salophen) forms a self-assembled monolayer (SAM) on Au(111) at 23 °C with molecular structure identical to that of the X-ray crystallographic measurement. The HOMO and LUMO levels are determined using elastic tunneling spectroscopy at the single-molecule level with confirmation by monolayer-quantity ultraviolet photoelectron spectroscopy (UPS) and by cyclic voltammetry (CV) measurements. The STM-determined HOMO-LUMO gap of 3.28 eV and (HOMO-1)-HOMO gap of 0.36 eV form a new foundation for the selection of hybrid functionals with a simple basis set to be effective in accurately calculating single-molecule Ni(salophen) frontier MO levels. Our results suggest that microscopy-based experiments on a surface, along with free-molecule gas-phase calculations, can provide useful insights into the physical properties of metal(salen) complexes, especially when such direct measurements are not available in solution.

Electro- and Solar-Driven Fuel Synthesis with First Row Transition Metal Complexes

The synthesis of renewable fuels from abundant water or the greenhouse gas CO2 is a major step toward creating sustainable and scalable energy storage technologies. In the last few decades, much attention has focused on the development of nonprecious metal-based catalysts and, in more recent years, their integration in solid-state support materials and devices that operate in water. This review surveys the literature on 3d metal-based molecular catalysts and focuses on their immobilization on heterogeneous solid-state supports for electro-, photo-, and photoelectrocatalytic synthesis of fuels in aqueous media. The first sections highlight benchmark homogeneous systems using proton and CO2 reducing 3d transition metal catalysts as well as commonly employed methods for catalyst immobilization, including a discussion of supporting materials and anchoring groups. The subsequent sections elaborate on productive associations between molecular catalysts and a wide range of substrates based on carbon, quantum dots, metal oxide surfaces, and semiconductors. The molecule-material hybrid systems are organized as "dark" cathodes, colloidal photocatalysts, and photocathodes, and their figures of merit are discussed alongside system stability and catalyst integrity. The final section extends the scope of this review to prospects and challenges in targeting catalysis beyond "classical" H2 evolution and CO2 reduction to C1 products, by summarizing cases for higher-value products from N2 reduction, C x>1 products from CO2 utilization, and other reductive organic transformations.

Substituents drive ligand rearrangements, giving dinuclear rather than mononuclear complexes, and tune CoII/III redox potential

Three new tetradentate imine ligands, HLHBr, HLClH and HLBrH (HLR1R2) were synthesised by 2 : 1 condensation of the appropriately n-halo substituted pyridine-2-carboxaldehyde (5-bromo-4a, 6-bromo-4b or 6-chloro-4c) with 1,3-diaminopropan-2-ol (5). Reactions of each of these three ligands with one equivalent of cobalt(ii) tetrafluoroborate resulted in the formation of three N4O2 coordinated cobalt(ii) complexes: the anticipated mononuclear complex [CoII(HLHBr)(MeOH)2](BF4)2 (1), and two unexpected dinuclear complexes, [CoII2(LBrH-BF2OMe)]2(BF4)2 (2) and [CoII2(LClH-BF2OMe)]2(BF4)2 (3). Dinuclear 2 and 3 result from complexation of cobalt(ii) to the ligands derived from the sterically demanding 6-halo substituted pyridine-2-carboxaldehydes (4b and 4c) undergoing rearrangement, reacting with MeOH and a BF4 anion, resulting in a pair of borate ester bridges between the two cobalt(ii) centres. A similar type of rearrangement is proposed for the PF6 analogues. Cyclic voltammetry in acetonitrile reveals that cobalt(ii) complexes 1-3 undergo a quasi-reversible oxidation: Em = 0.57, 0.38 and 0.29 V vs. 0.01 AgNO3/Ag, respectively. The observed Em value is tuned by the ligand, with the 6-chloro-substituent leading to the lowest Em value being observed for the corresponding cobalt complex, 3, rather than for either of the complexes of the n-bromo-substituted ligands (n = 6 or 5), 2 and 1.

Electrocatalytic and Photocatalytic Reduction of CO2 to CO by Cobalt(II) Tripodal Complexes: Low Overpotentials, High Efficiency and Selectivity

The reduction of carbon dioxide (CO₂ ) has been considered as an approach to mitigate global warming and to provide renewable carbon-based fuels. Rational design of efficient, selective, and inexpensive catalysts with low overpotentials is urgently desired. In this study, four cobalt(II) tripodal complexes are tested as catalysts for CO₂ reduction to CO in a MeCN/H₂ O (4:1 v/v) solution. The replacement of pyridyl groups in the ligands with less basic quinolinyl groups greatly reduces the required overpotential for CO₂ -to-CO conversion down to 200-380 mV. Benefitting from the low overpotentials, a photocatalyst system for CO₂ -to-CO conversion is successfully constructed, with an maximum turnover number (TON) of 10 650±750, a turnover frequency (TOF) of 1150±80 h^-1 , and almost 100 % selectivity to CO. These outstanding catalytic performances are further elucidated by DFT calculations.

Photocatalytic reduction of CO2 to CO and formate by a novel Co(ii) catalyst containing a cis-oxygen atom: photocatalysis and DFT calculations

A novel CoN₄-complex containing an oxygen atom at cis-coordination site enables to convert CO₂ to CO and formate in a photocatalytic system.

Photo- and Electrochemical Valorization of Carbon Dioxide Using Earth-Abundant Molecular Catalysts

The dramatic increase in anthropogenic carbon dioxide emissions in recent decades has forced us to look for alternative carbon-neutral processes for the production of energy vectors and commodity chemicals. Photo- and electrochemical reduction of CO₂ are appealing strategies for the storage of sustainable and intermittent energies in the form of chemical bonds of synthetic fuels and value-added molecules. In these approaches, carbon dioxide is converted to products such as CO, HCOOH and MeOH through proton-coupled electron transfer reactions. The use of earth-abundant elements as components of the catalytic materials is crucial for the large-scale applicability of this technology. This review summarizes the most recent advances related to this issue, with particular focus on studies where molecular metal complexes are used as catalysts. In addition, with the aim of aiding in the design of more robust and efficient non-noble metal-based catalysts, we discuss the lessons learned from the corresponding mechanistic studies.

Artificial Photosynthetic Systems for CO2 Reduction: Progress on Higher Efficiency with Cobalt Complexes as Catalysts

The conversion of CO₂ into fuels or value-added chemicals is currently a field of great research interest. Molecular cobalt catalysts have long been used as mediators of reductive transformations of CO₂ . In this Minireview, the cobalt complex-based photocatalytic and photoelectrocatalytic systems for CO₂ reduction are discussed and summarized, alongside progress on the design of new molecular cobalt catalysts and their performance in photocatalysis.