Ultra-mild synthesis of nanometric metal chalcogenides using organyl chalcogenide precursors

Bis(trialkylsilyl) monochalcogenides and diorganyl dichalcogenides, (R₃Si)₂E and R₂E₂ (E = S, Se or Te and R = alkyl, aryl or allyl group), have emerged in the past decade as excellent reagents for the synthesis of metal chalcogenide nanoparticles (NPs) and clusters owing to their ability to transfer the chalcogenide anion (E^2-) under ultra-mild conditions and versatility in reacting even with non-conventional metal reagents or being employed in a variety of synthetic methods. In comparison, the related non-silylated diorganyl monochalcogenides R₂E have received attention only recently for the solution phase synthesis of metal chalcogenide NPs. In spite of sharing many similarities, these three families of organyl chalcogenides are different in their coordination ability and decomposition behavior, and therefore in reactivities towards metal reagents. This feature article provides a concise overview on the use of these three families as synthons for the ultralow-temperature synthesis of metal chalcogenide nanomaterials, deliberating their different decomposition mechanisms and critically assessing their advantages for certain applications. More specifically, it discusses their usefulness in (i) affording molecular precursors with different kinetic and thermal stabilities, (ii) isolating reactive intermediates for comprehending the mechanism of molecule-to-nanoparticle transformation and, therefore, achieving fine control over the synthesis, (iii) stabilizing isolable metastable or difficult-to-achieve phases, and (iv) yielding complex ternary nanoparticles with controlled stoichiometry or composites with sensitive materials without modifying the characteristics of the latter. Besides providing a perspective on the low-temperature synthesis of nanomaterials, this overview is expected to assist further progress, particularly in the field of R₂E, leading to interesting materials including metastable ones for new applications.

Exploration of metal sulfide syntheses and the dissolution process of antimony sulfide in phosphonium-based ionic liquids

Ionic liquids (ILs), especially task-specific ILs, are capable of dissolving various solids at moderate temperatures without the need for special reaction vessels. Direct synthesis of binary sulfides of B, Bi, Ge, Mo, Cu, Au, Sn, In, Ti, V, Fe, Co, Ga, Ni, Al, Zn, and Sb in [P₆₆₆₁₄]Cl was tested at 100 °C, i.e. below the melting point of sulfur. Under these conditions, substantial sulfide formation occurred only for nickel (Ni₃S₄, Ni₃S₂, NiS) and copper (Cu₂S, CuS). Sb showed no formation of crystalline sulfide, but after addition of EtOH, an orange material precipitated which was identified as amorphous metastibnite. Subsequently, the dissolution of antimony sulfide (Sb₂S₃), the main source of antimony production, in the phosphonium-based ILs [P₆₆₆₁₄][OAc] and [P₆₆₆₁₄]Cl at 100 °C was studied in detail. The dissolution proceeds without H₂S evolution, and amorphous Sb₂S₃ can be precipitated from these solutions. Heating Sb₂S₃ in the Lewis-acidic IL [BMIm]Cl·4.7AlCl₃ led to the crystallization of [Sb₁₃S₁₆Cl₂][AlCl₄]₅, which contains a new quadruple heterocubane cation.

Solid Solution of Bi and Sb for Robust Lithium Storage Enabled by Consecutive Alloying Reaction

Materials with alloying reactions have significant potential as electrodes for lithium-ion batteries (LIBs) due to its high theoretical capacity and appropriate lithiation potentials. Nonetheless, their cycling performance is inferior due to violent volume expansion and severe pulverization of active materials. Herein, solid solution of Bi_0.5 Sb_0.5 encapsulated with carbon is discovered to enable consecutive alloying reactions with manageable volume change, suitable for developing LIBs with high capacity and robust cyclability. A Sb-rich shell and Bi-rich core structure is formed in cycling since the alloying reaction between Sb and Li occurs first, followed by the alloying reaction between Bi and Li. Such a consecutive alloying reaction obeying the thermodynamic path is experimentally realized by the carbon capsulation, which acts as a protecting solid layer to avoid polarized reactions occurred when exposed directly to liquid electrolyte. The LIBs using Bi_0.5 Sb_0.5 @carbon run on the consecutive alloying reactions exhibits high capacity, prolonged lifespan (489.4 mAh g^-1 after 2000 cycles at 1 A g^-1 ) and fast kinetic, while those using bare Bi_0.5 Sb_0.5 suffer from worsened kinetic and thus a poor cycling performance owning to the polarized reactions. The work paves a way of developing alloy electrodes for alkaline-ion rechargeable batteries with potential industry applications.

Amorphous Framework in Electrodeposited CuBiTe Thermoelectric Thin Films with High Room-Temperature Performance

Bismuth telluride-based alloys are the most efficient thermoelectric materials near room temperature and widely used in commercial thermoelectric devices. Nevertheless, their thermoelectric performance needs to be improved further for wide-scale implementation either as a thermoelectric generator or cooler. Here, we propose a simultaneous codeposition of CuBiTe thin films and their phase transition strategy via the traditional electrodeposition process. With just 13 atom % Cu doping, crystalline-to-amorphous phase transformation resulted for the electroplated CuBiTe alloy. A close look at the alloy composition revealed spike-shaped nanocrystalline Bi₂Te₃ embedded in the CuBiTe amorphous matrix. Our result shows an exceptionally high power factor (3.02 mW m^-1 K^-2), which comes from the enhanced Seebeck coefficient (-275 μV K^-1) and high electrical conductivity (3.99 × 10⁴ S m^-1) of CuBiTe films. Therefore, it can be suggested that the adopted strategy to form a unique nanocrystallite-embedded amorphous framework provides a platform to develop next-generation high-performance thermoelectric materials with an extraordinary power factor.

Heavy Chalcogenide-Based Ionic Liquids in Syntheses of Metal Chalcogenide Materials near Room Temperature

This minireview describes two strategically different and unexplored approaches to use ionic liquids (IL) containing weakly solvated and highly reactive chalcogenide anions [E-SiMe3 ]- and [E-H]- of the heavy chalcogens (E=S, Se, Te) in materials synthesis near room temperature. The first strategy involves the synthesis of unprecedented trimethylsilyl chalcogenido metalates Cat+ [M(E-SiMe3 )n ]- (Cat=organic IL cation) of main group and transition metals (M=Ga, In, Sn, Zn, Cu, Ag, Au). These fully characterized homoleptic metalates serve as thermally metastable precursors in low-temperature syntheses of binary, ternary and even quaternary chalcogenide materials such as CIGS and CZTS relevant for semiconductor and photovoltaics (PV) applications. Furthermore, thermally and protolytically metastable coinage metalates Cat+ [M(ESiMe3 )2 ]- (M=Cu, Ag, Au; E=S, Se) are accessible. Finally, the use of precursors BMPyr[E-SiMe3 ] (E=Se,Te; BMPyr=1-butyl-1-methylpyrrolidinium) as sources of activated selenium and tellurium in the synthesis of high-grade thermoelectric nanoparticles Bi2 Se3 and Bi2 Te3 is shortly highlighted. The second synthesis strategy involves the metalation of ionic liquids Cat[S-H] and Cat[Se-H] by protolytically highly active metal alkyls or amides Rn M. This rather general approach towards unknown chalcogenido metalates Catm [Rn-1 M(E)]m (E=S, Se) will be demonstrated in a research paper following this short review head-to-tail.

Influence of Nanoparticle Processing on the Thermoelectric Properties of (Bix Sb1-X )2 Te3 Ternary Alloys

The synthesis of phase-pure ternary solutions of tetradymite-type materials (Bix Sb1-x )2 Te3 (x=0.25; 0.50; 0.75) in an ionic liquid approach has been carried out. The nanoparticles are characterized by means of energy-dispersive X-ray spectroscopy (EDX), powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), and transmission electron microscopy. In addition, the role of different processing approaches on the thermoelectric properties - Seebeck coefficient as well as electrical and thermal conductivity - is demonstrated.

Pseudohalogen Chemistry in Ionic Liquids with Non-innocent Cations and Anions

Within the second funding period of the SPP 1708 "Material Synthesis near Room Temperature",which started in 2017, we were able to synthesize novel anionic species utilizing Ionic Liquids (ILs) both, as reaction media and reactant. ILs, bearing the decomposable and non-innocent methyl carbonate anion [CO3 Me]- , served as starting material and enabled facile access to pseudohalide salts by reaction with Me3 Si-X (X=CN, N3 , OCN, SCN). Starting with the synthesized Room temperature Ionic Liquid (RT-IL) [nBu3 MeN][B(OMe)3 (CN)], we were able to crystallize the double salt [nBu3 MeN]2 [B(OMe)3 (CN)](CN). Furthermore, we studied the reaction of [WCC]SCN and [WCC]CN (WCC=weakly coordinating cation) with their corresponding protic acids HX (X=SCN, CN), which resulted in formation of [H(NCS)2 ]- and the temperature labile solvate anions [CN(HCN)n ]- (n=2, 3). In addition, the highly labile anionic HCN solvates were obtained from [PPN]X ([PPN]=μ-nitridobis(triphenylphosphonium), X=N3 , OCN, SCN and OCP) and HCN. Crystals of [PPN][X(HCN)3 ] (X=N3 , OCN) and [PPN][SCN(HCN)2 ] were obtained when the crystallization was carried out at low temperatures. Interestingly, reaction of [PPN]OCP with HCN was noticed, which led to the formation of [P(CN)2 ]- , crystallizing as HCN disolvate [PPN][P(CN⋅HCN)2 ]. Furthermore, we were able to isolate the novel cyanido(halido) silicate dianions of the type [SiCl0.78 (CN)5.22 ]2- and [SiF(CN)5 ]2- and the hexa-substituted [Si(CN)6 ]2- by temperature controlled halide/cyanide exchange reactions. By facile neutralization reactions with the non-innocent cation of [Et3 HN]2 [Si(CN)6 ] with MOH (M=Li, K), Li2 [Si(CN)6 ] ⋅ 2 H2 O and K2 [Si(CN)6 ] were obtained, which form three dimensional coordination polymers. From salt metathesis processes of M2 [Si(CN)6 ] with different imidazolium bromides, we were able to isolate new imidazolium salts and the ionic liquid [BMIm]2 [Si(CN)6 ]. When reacting [Mes(nBu)Im]2 [Si(CN)6 ] with an excess of the strong Lewis acid B(C6 F5 )3 , the voluminous adduct anion {Si[CN⋅B(C6 F5 )3 ]6 }2- was obtained.

Bi-Sb Nanocrystals Embedded in Phosphorus as High-Performance Potassium Ion Battery Electrodes

The development of high-performance potassium ion battery (KIB) electrodes requires a nanoengineering design aimed at optimizing the construction of active material/buffer material nanocomposites. These nanocomposites will alleviate the stress resulting from large volume changes induced by K⁺ ion insertion/extraction and enhance the electrical and ion conductivity. We report the synthesis of phosphorus-embedded ultrasmall bismuth-antimony nanocrystals (Bi_xSb_1-x@P, (0 ≤ x ≤ 1)) for KIB anodes via a facile solution precipitation at room temperature. Bi_xSb_1-x@P nanocomposites can enhance potassiation-depotassiation reactions with K⁺ ions, owing to several attributes. First, by adjusting the feed ratios of the Bi/Sb reactants, the composition of Bi_xSb_1-x nanocrystals can be systematically tuned for the best KIB anode performance. Second, extremely small (diameter ≈ 3 nm) Bi_xSb_1-x nanocrystals were obtained after cycling and were fixed firmly inside the P matrix. These nanocrystals were effective in buffering the large volume change and preventing the collapse of the electrode. Third, the P matrix served as a good medium for both electron and K⁺ ion transport to enable rapid charge and discharge processes. Fourth, thin and stable solid electrolyte interface (SEI) layers that formed on the surface of the cycled Bi_xSb_1-x@P electrodes resulted in low resistance of the overall battery electrode. Lastly, in situ X-ray diffraction analysis of K⁺ ion insertion/extraction into/from the Bi_xSb_1-x@P electrodes revealed that the potassium storage mechanism involves a simple, direct, and reversible reaction pathway: (Bi, Sb) ↔ K(Bi, Sb) ↔ K₃(Bi, Sb). Therefore, electrodes with the optimized composition, i.e., Bi_0.5Sb_0.5@P, exhibited excellent electrochemical performance (in terms of specific capacity, rate capacities, and cycling stability) as KIB anodes. Bi_0.5Sb_0.5@P anodes retained specific capacities of 295.4 mA h g^-1 at 500 mA g^-1 and 339.1 mA h g^-1 at 1 A g^-1 after 800 and 550 cycles, respectively. Furthermore, a capacity of 258.5 mA h g^-1 even at 6.5 A g^-1 revealed the outstanding rate capability of the Sb-based KIB anodes. Proof-of-concept KIBs utilizing Bi_0.5Sb_0.5@P as an anode and PTCDA (perylenetetracarboxylic dianhydride) as a cathode were used to demonstrate the applicability of Bi_0.5Sb_0.5@P electrodes to full cells. This study shows that Bi_xSb_1-x@P nanocomposites are promising carbon-free anode materials for KIB anodes and are readily compatible with the commercial slurry-coating process applied in the battery manufacturing industry.

Water-resistant AgBiS2 colloidal nanocrystal solids for eco-friendly thin film photovoltaics

Lead-free, water-resistant photovoltaic absorbers are of significant interest for use in environment-friendly and water-stable thin film solar cells. However, there are no reports on the water-resistance characteristics of such photoactive materials. Here, we demonstrate that silver bismuth sulfide (AgBiS2) nanocrystal solids exhibit inherent water resistance and can be employed as effective photovoltaic absorbers in all-solid-state thin film solar cells that show outstanding air and moisture stabilities under ambient conditions. The results of X-ray photon spectroscopy (XPS) and X-ray diffraction (XRD) analyses show that there is no change in the chemical composition and crystal structure of the AgBiS2 nanocrystal solids after a water treatment. Based on these results, AgBiS2 nanocrystal solar cells are fabricated. These devices also do not show any drop in performance after a water treatment, confirming that the AgBiS2 nanocrystal solids are indeed highly water-resistant. In contrast, lead sulfide (PbS) colloidal quantum dot (CQD) solar cells show significant decrease in performance after a similar water treatment. Using XPS analysis and density functional theory (DFT) calculations, we confirm that the iodine removal and the surface hydroxylation of the water-treated PbS CQD solids are the primary reasons for the observed decrease in the device performance of the CQD solar cells.

Improving the zT value of thermoelectrics by nanostructuring: tuning the nanoparticle morphology of Sb2Te3by using ionic liquids

Morphology and thermoelectric properties of Sb₂Te₃nanoparticles synthesized in ionic liquids are controlled by the cation and anion.