Surface-active agent enhanced FRET effect Cu-doped NH2-MIL-88(Fe) for highly sensitive detection of 3-nitro-L-tyrosine

In this study, Cu-doped NH2-MIL-88(Fe) metal-organic frameworks (MOF) were synthesized via a one-step method. Characterization techniques such as XPS, XRD and FTIR confirmed the successful incorporation of Cu2+ into NH2-MIL-88(Fe), naming this MOF as NH2-MIL-88(Fe)@Cu2+. This MOF was employed to develop a highly sensitive fluorescence sensing platform for detecting 3-nitro-L-tyrosine(3-NT). The potential for fluorescence resonance energy transfer (FRET) was suggested by the spectral overlap between NH2-MIL-88(Fe)@Cu2+'s emission and 3-NT's UV absorption. To augment this effect, cationic surfactant hexadecyltrimethylammonium bromide (CTAB), which self-assembled into nanostructured microspheres above its critical micelle concentration, was utilized. The charged surface of these microspheres, formed by the self-assembly of CTAB, is bound to the MOF surface through electrostatic force and simultaneously attracts 3-NT. Adjusting the solution's pH strengthened the interaction between NH2-MIL-88(Fe)@Cu2+ and 3-NT, thereby enhancing their mutual FRET interaction. Experimental results indicated that CTAB's introduction markedly improved the FRET effects, potentially converting a weak FRET into a strong one and enhancing detection sensitivity and accuracy. Under optimal conditions, NH2-MIL-88(Fe)@Cu2+ detected 3-NT within 0-30 μM range, with a limit of detection (LOD, S/N = 3) of 41.1 nM. Finally, the applicability of the sensor is tested by calibrating measurements in fetal bovine serum samples, achieving good performance in terms of sensitivity, selectivity and reproducibility. This research provides a method for efficient and highly sensitive 3-NT detection and insights into the FRET effect between MOF and target molecules, likely advancing related fields and inspiring future fluorescence sensor designs.

Silver Nanoparticle-Functionalized Postsynthetically Modified Thiol MOF UiO-66-NH-SH for Efficient CO2 Fixation

Thiols are essential functional groups imparting unique properties, such as reactivity and selectivity, to many vital enzymes and biomolecules. The integration of electronically soft thiol groups within metal-organic frameworks (MOFs) yields elevated reactivity and a pronounced affinity for soft metal ions. However, the scarcity of thiol-based ligands and synthetic challenges hinder the advancement of thiol-based MOFs. To bypass the difficulties of synthesizing thiol MOFs by a direct reaction between thiol-based ligands and corresponding metal salts, postsynthetic modification (PSM) of MOFs is an efficient strategy to introduce thiol functionality. Herein, we have introduced Ag nanoparticles in postsynthetically modified thiol MOFs UiO-66-NH-SH (1) (synthesized by reaction between UiO-66-NH2 and thioglycolic acid) and UiO-66-NH-SH (2) (synthesized by reaction between UiO-66-NH2 and 3-mercaptopropionic acid) to synthesize a series of heterogeneous catalysts for CO2 fixation. Catalysts Cat 1-2 and Cat 3 - 4 were synthesized from UiO-66-NH-SH (1) and UiO-66-NH-SH (2), respectively, by using varying concentrations of silver (AgNO3). Catalyst Ag@UiO-66-NH-SH (1) (Ag = 3.45%; namely Cat 2) shows the highest efficiency for the catalytic conversion of propargylic alcohol and terminal epoxide to the corresponding cyclic carbonates. Finally, a rationalized reaction mechanism is proposed by correlating our results with the current literature. This work presents a viable strategy to utilize the thiol functionality of MOFs (avoiding the complexities associated with synthesizing thiol MOFs directly from thiol ligands) as a platform for introducing catalytically active metal centers and applying them as a heterogeneous catalyst for CO2 fixation reactions.

Construction of Highly Luminescent Lanthanide Coordination Polymers and Their Visualization for Luminescence Sensing

NaH2SIP was selected as an organic ligand (NaH2SIP = 5-sulfoisophthalic acid monosodium salt). We successfully constructed a new class of lanthanide coordination polymers Ln-HS ([Ln(SIP)(DMF)(H2O)4]DMF·H2O; Ln = Eu, Tb, Sm, and Dy) by a simple solvothermal synthesis method. They exhibited excellent photoluminescence properties for Ln3+ ions, where Eu-HS and Tb-HS exhibited high quantum yields of 13.70 and 42.38%, respectively. The codoped lanthanide coordination polymers obtained by doping with different ratios of Eu3+/Tb3+ serve as excellent ratiometric thermometers with high sensitivities in the physiological temperature range, with values of 16.8, 7.0, and 14.5%·K-1, respectively. The luminescent colors of Tb0.95Eu0.05-HS and Tb0.94Eu0.06-HS exhibit variations from green to yellow to orange, achieving visualized luminescence in a narrow temperature range. The composite film material Tb0.94Eu0.06-HS@PMMA demonstrates this color variation. Next, Tb0.5Sm0.5-HS obtained by Tb3+/Sm3+ codoping was investigated. The difference in the luminescence colors visible to the naked eye at different excitation wavelengths and the change in luminescence colors occur in a very narrow temperature range. All of them show the great value of the visualized luminescence in practical anticounterfeiting, with double anticounterfeiting function and high security.

MOF-based nanocomposites as transduction matrices for optical and electrochemical sensing

Metal Organic Frameworks (MOFs), a class of crystalline microporous materials have been into research limelight lately due to their commendable physio-chemical properties and easy fabrication methods. They have enormous surface area which can be a working ground for innumerable molecule adhesions and site for potential sensor matrices. Their biocompatibility makes them valuable for in vitro detection systems but a compromised conductivity requires a lot of surface engineering of these molecules for their usage in electrochemical biosensors. However, they are not just restricted to a single type of transduction system rather can also be modified to achieve feat as optical (colorimetry, luminescence) and electro-luminescent biosensors. This review emphasizes on recent advancements in the area of MOF-based biosensors with focus on various MOF synthesis methods and their general properties along with selective attention to electrochemical, optical and opto-electrochemical hybrid biosensors. It also summarizes MOF-based biosensors for monitoring free radicals, metal ions, small molecules, macromolecules and cells in a wide range of real matrices. Extensive tables have been included for understanding recent trends in the field of MOF-composite probe fabrication. The article sums up the future scope of these materials in the field of biosensors and enlightens the reader with recent trends for future research scope.

A Soluble Porous Coordination Polymer for Fluorescence Sensing of Explosives and Toxic Anions under Homogeneous Environment

In the past decades, porous coordination polymers (PCPs) based fluorescent (FL) sensors have received intense attention due to their promising applications. In this work, a soluble Zn-PCP is presented as a sensitive probe towards explosive molecules, chromate, and dichromate ions. In former reports, PCP sensors were usually ground into fine powders and then dispersed in solvents to form FL emulsion for sensing applications. However, their insoluble characters would cause the sensing accuracy which is prone to interference from environmental effects. While in this work, the as-made PCP could be directly soluble in organic solvents to form a clear solution with bright blue emission, representing the first soluble PCP based fluorescence sensor to probe explosive molecules under a homogeneous environment. Moreover, the FL PCP solution also shows sensitive detection behaviors towards the toxic anions of CrO42- and Cr2O72-, which exhibit a good linear relationship between the fluorescence intensity of Zn-PCP and the concentrations of both analytes. This work provides a reference for designing task-specific PCP sensors utilized under a homogeneous environment.

Green and Low-temperature Synthesis of Carbon Dots for Simple Detection of Kaempferol

As a common flavonols, kaempferol (Kae) has a broad market as health food and medicine for its anti-inflammatory, anti-oxidation, and anti-cancer properties. In this study, a novel convenient and simple fluorescent sensor based on carbon dots (CDs) for the detection of Kae was developed. The fluorescent CDs, with excellent photo-luminescence (PL) and up-conversion luminescence (UCPL) properties, were successfully prepared by low-temperature oil bath reaction based on ascorbic acid as carbon source at 90 °C in one pot. Under the optimal conditions, the fluorescence (FL) intensity of CDs was gradually quenched by the increasing addition of Kae with a linear relationship between F0/F and Kae concentration in a wide range from 5 µM to 100 µM with a detection limit of 0.38 µM. And this designed sensor was favourably applied for the detection of Kae in actual sample (xin-da-kang tablets). Moreover, the proposed CDs has great application prospects as a drug-sensor for detecting Kae due to its simple operation, economical and green materials, low equipment requirement, and rapid detection.

Solvent-induced luminescence behavior of NH2-MIL-53(Fe) in H2O and D2O: a potential approach for D2O detection

An anomalous solvent-induced luminescence quenching of NH2-MIL-53(Fe) in D2O is reported. Contrary to conventional understanding, the quenching is originated from the inhibition of charge transfer by hydrogen bonding between NH2-MIL-53(Fe) and D2O, rather than protonation or high-frequency vibrations of solvent molecules. This enables accurate quantitative detection towards specific volume fractions of D2O in H2O.

Stable Europium(III) Metal-Organic Framework Demonstrating High Proton Conductivity and Fluorescence Detection of Tetracyclines

A europium(III) metal-organic framework (MOF), namely, {[[(CH₃)₂NH₂]₃Eu₂(DTTP-2OH)₂(HCOO)(H₂O)]·4H₂O}_n (Eu-MOF, H₄DTTP-2OH = 2',5'-dihydroxy-[1,1':4',1″-terphenyl]-3,3″,5,5″-tetracarboxylic acid) has been assembled through solvothermal method. The Eu-MOF is a three-dimensional (3D) (4,4,8)-connected topological framework with binuclear Eu(III) clusters as secondary building units, in which a richly ordered hydrogen bonding network formed among the free H₂O molecules, dimethylamine cations, and phenolic hydroxyl groups provides a potential pathway for proton conduction. The proton conductivity reaches the category of superionic conductors (σ > 10^-4 S cm^-1) at room temperature with a maximum conductivity of 1.91 × 10^-3 S cm^-1 at 60 °C and 98% RH. Moreover, it also can be used as a fluorescence sensor in aqueous solution with detection limits of 0.14 μM for tetracycline, 0.13 μM for oxytetracycline and 0.11 μM for doxycycline. These results pave new methods for constructing MOFs with high proton conductivity and responsive fluorescence.

Dual-targeting lanthanide-ICG-MOF nanoplatform for cancer Theranostics: NIR II luminescence imaging guided sentinel lymph nodes surgical navigation

Sentinel lymph node imaging is important for breast tumor staging and prediction of postoperative metastasis. However, clinical sentinel lymph node imaging has limitations such as low specificity, low contrast, and short retention time. The combination of bio-conjugates chemistry and luminescence technology may achieve the specific targeting effect. In this research, we designed a dual-targeting composite nanoprobe (∼50 nm) using a metal-organic framework (MOF) as carrier, loaded with lanthanide and ICG, and combined with hyaluronic acid and folic acid to detect metastatic lymph nodes. The coupled hyaluronic acid and folic acid can target to the tumor cells and dentritic cells with a dual-targeting effect. The FA-HA/ZIF-8@ICG nanoprobes can accumulate rapidly in sentinel lymph node with a stronger luminescence intensity (1.6 times) than that of normal popliteal lymph nodes in vivo, thus distinguish metastatic sentinel lymph node from normal effectively. Furthermore, due to the MOF carrier, the integrated lanthanide and near-infrared dye by transferring the absorbed excitation energy from ICG to Nd³⁺ can enhance the signal-to-background ratio of NIR II imaging and have long retention time in vivo imaging. Finally, the FA-HA/ICG@Ln@ZIF-8 nanoplatform increased the penetration depth and contrast of imaging, prolonged the retention time, and achieved the sentinel lymph nodes surgical resection. This study has important implications for lymph node imaging and surgical navigation.

Metal-organic framework-based nanomaterials as opto-electrochemical sensors for the detection of antibiotics and hormones: A review

Increasing trace levels of antibiotics and hormones in the environment and food samples are concerning and pose a threat. Opto-electrochemical sensors have received attention due to their low cost, portability, sensitivity, analytical performance, and ease of deployment in the field as compared to conventional expensive technologies that are time-consuming and require experienced professionals. Metal-organic frameworks (MOFs) with variable porosity, active functional sites, and fluorescence capacity are attractive materials for developing opto-electrochemical sensors. Herein, the insights into the capabilities of electrochemical and luminescent MOF sensors for detection and monitoring of antibiotics and hormones from various samples are critically reviewed. The detailed sensing mechanisms and detection limits of MOF sensors are addressed. The challenges, recent advances, and future directions for the development of stable, high-performance MOFs as commercially viable next-generation opto-electrochemical sensor materials for the detection and monitoring of diverse analytes are discussed.

Lanthanide(III)-Cu4 I4 Organic Framework Scintillators Sensitized by Cluster-Based Antenna for High-Resolution X-ray Imaging

Scintillator-based X-ray imaging has attracted great attention from industrial quality inspection and security to medical diagnostics. Herein, a series of lanthanide(III)-Cu₄ I₄ heterometallic organic frameworks (Ln-Cu₄ I₄ MOFs)-based X-ray scintillators are developed by rationally assembling X-ray absorption centers ([Cu₄ I₄ ] clusters) and luminescent chromophores (Ln(III) ions) in a specific manner. Under X-ray irradiation, the heavy inorganic units ([Cu₄ I₄ ] clusters) absorb the X-ray energy to populate triplet excitons via halide-to-ligand charge transfer (XLCT) combined with the metal-to-ligand charge-transfer (MLCT) state (defined as the X/MLCT state), and then the ³ X/MLCT excited state sensitizes Tb³⁺ for intense X-ray-excited luminescence via excitation energy transfer. The obtained Tb-Cu₄ I₄ MOF scintillators exhibit high resistance to humidity and radiation, excellent linear response to X-ray dose rate, and high X-ray relative light yield of 29 379 ± 3000 photons MeV^-1 . The relative light yield of Tb-Cu₄ I₄ MOFs is ≈3 times higher than that of the control Tb(III) complex. X-ray imaging tests show that the Tb-Cu₄ I₄ MOFs-based flexible scintillator film exhibits a high spatial resolution of 12.6 lp mm^-1 . These findings not only provide a promising design strategy to develop lanthanide-MOF-based scintillators with excellent scintillation performance, but also exhibit high-resolution X-ray imaging for biological specimens and electronic chips.

Cation-Exchange in Metal-Organic Framework as a Strategy to Obtain New Material for Ascorbic Acid Detection

Ascorbic acid (AA) is an important biomolecule, the deficiency or maladjustment of which is associated with the symptoms of many diseases (e.g., cardiovascular disease or cancer). Therefore, there is a need to develop a fluorescent probe capable of detecting AA in aqueous media. Here, we report the synthesis, structural, and spectroscopic characterization (by means of, e.g., XRD, XPS, IR and Raman spectroscopy, TG, SEM, and EDS analyses), as well as the photoluminescent properties of a metal-organic framework (MOF) based on Cu²⁺ and Eu³⁺ ions. The ion-exchange process of the extraframework cation in anionic Cu-based MOF is proposed as an appropriate strategy to obtain a new material with a nondisturbed structure and a sensitivity to interaction with AA. Accordingly, a novel Eu[Cu₃(μ₃-OH)(μ₃-4-carboxypyrazolato)₃] compound for the selective optical detection of AA with a short detection time of 5 min is described.

Novel Gemini Surfactant for Binding Eu(III)-Polyoxometalate into Hydrogels and Polymer Latexes

The incorporation of rare-earth ions into polymer matrices can lead to useful materials in various fields such as biomarkers, lasers, luminescent devices, optical storage materials, and so on. Methods of incorporation are either extremely simple, such as mixing the polymer and the ion of interest in adequate solvents, or more sophisticated such as synthesizing predesigned monomers that contain the rare-earth ion or binding the ion on an already formed polymer chain. Cationic gemini surfactants represent a class of surfactants that can be used to incorporate metal-oxygen cluster compounds by means of strong electrostatic interactions. In this study, first, a novel cationic gemini surfactant having double bonds on both side chains was designed and prepared. After characterization, the surfactant was used to synthesize hydrogels with different degrees of crosslinking and also as a surfmer in emulsion polymerization of methyl methacrylate. The resulted polymer matrices were able to bind europium-polyoxometalate Na₉[EuW₁₀O₃₆]^.32H₂O. In case of luminescent lanthanide ions, changing the microenvironment around the metal ion also changes the intensity of some emission peaks as well as other luminescent parameters. Investigation of emission spectra of Eu³⁺ indicates a decrease in the symmetry of the microenvironment, when the polyanions pass from water to latex, to surfactant solution, and to hydrogel.

A smartphone-integrated light-up lanthanide fluorescent probe for the visual and ratiometric detection of total phosphorus in human urine and environmental water samples

Phosphate (Pi) plays an essential role in aquatic ecosystems as well as in physiological processes. Here, a dual-emission probe for the sensitive, specific and visual analysis of Pi is fabricated by coordinating Eu³⁺ with luminol and 2,6-pyridinedicarboxylic acid (DPA). Pi can significantly enhance the characteristic fluorescence of Eu³⁺ at 615 nm by promoting energy transfer from DPA to Eu³⁺ and reducing the quenching effect of water molecule, luminol with inherent emission at 423 nm further enhances the Eu³⁺ fluorescence. Accordingly, ratiometric detection of Pi can be achieved with the fluorescence ratio F₆₁₅/F₄₂₃ as a function of Pi concentration. Linearity between F₆₁₅/F₄₂₃ and Pi concentration in the range of 0.1-25 μM is shown, and the limit of detection (LOD, 3σ/K) for Pi is 0.027 µM. In addition, a continuous change in the fluorescence color of the probe from blue to red is observed with increasing Pi concentration under a UV lamp, and a smartphone-based visual method is used for the convenient and effective semi-quantitative determination of Pi. The dual-emission probe has been successfully applied to ratiometric and visual analysis of Pi in human urine and environmental water samples, and adequate results are obtained.

Materials for Chemical Sensing: A Comprehensive Review on the Recent Advances and Outlook Using Ionic Liquids, Metal–Organic Frameworks (MOFs), and MOF-Based Composites

The ability to measure and monitor the concentration of specific chemical and/or gaseous species (i.e., “analytes”) is the main requirement in many fields, including industrial processes, medical applications, and workplace safety management. As a consequence, several kinds of sensors have been developed in the modern era according to some practical guidelines that regard the characteristics of the active (sensing) materials on which the sensor devices are based. These characteristics include the cost-effectiveness of the materials’ manufacturing, the sensitivity to analytes, the material stability, and the possibility of exploiting them for low-cost and portable devices. Consequently, many gas sensors employ well-defined transduction methods, the most popular being the oxidation (or reduction) of the analyte in an electrochemical reactor, optical techniques, and chemiresistive responses to gas adsorption. In recent years, many of the efforts devoted to improving these methods have been directed towards the use of certain classes of specific materials. In particular, ionic liquids have been employed as electrolytes of exceptional properties for the preparation of amperometric gas sensors, while metal–organic frameworks (MOFs) are used as highly porous and reactive materials which can be employed, in pure form or as a component of MOF-based functional composites, as active materials of chemiresistive or optical sensors. Here, we report on the most recent developments relative to the use of these classes of materials in chemical sensing. We discuss the main features of these materials and the reasons why they are considered interesting in the field of chemical sensors. Subsequently, we review some of the technological and scientific results published in the span of the last six years that we consider among the most interesting and useful ones for expanding the awareness on future trends in chemical sensing. Finally, we discuss the prospects for the use of these materials and the factors involved in their possible use for new generations of sensor devices.

Potential of biocompatible calcium-based metal-organic frameworks for the removal of endocrine-disrupting compounds in aqueous environments

Rapid urbanization, industrialization and population growth have accelerated the amount and variety of emerging contaminants being released into the aqueous environment, including endocrine-disrupting compounds (EDCs). The introduction of these compounds constitutes a threat to human health and the environment, even at trace levels. Hence, new water treatment technologies are urgently required to effectively remove EDCs from water. The currently available technologies used in water remediation processes are expensive and ineffective, and some produce harmful by-products. Calcium-based metal-organic frameworks (Ca-MOFs) are porous synthetic materials that can potentially be applied as adsorbents. These MOFs are hydrolytically stable, biocompatible and low-cost compared with conventional porous materials. The structure of Ca-MOFs is maintained even though calcium metal centers in the structure can easily coordinate with water. Ca-MOFs and their composite derivatives have the potential for use in water purification because these biocompatible adsorbents have been shown to selectively extract a significant quantity of contaminants. This review highlights the potential of Ca-MOFs to adsorb EDCs from aqueous environments and discusses adsorbent preparation methods, adsorption mechanisms, removal capacity, water stability and recyclability. This review will support future efforts in synthesizing new biocompatible MOFs as an environmental treatment technology that can effectively remove EDCs from water, thereby improving environmental and human health.

Four series of lanthanide coordination polymers based on the tetrabromobenzene-1,4-dicarboxylate ligand: structural diversity and multifunctional properties

Four series of lanthanide-based coordination polymers (LnCPs), namely [Ln(Br₄bdc)_1.5(MeOH)₃] (1Ln; Ln = Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy), [Ln₂(Br₄bdc)₂(NO₃)₂(MeOH)₄] (2Ln; Ln = Ce, Pr, Nd, Sm), [Ln(Br₄bdc)(NO₃)(MeOH)] (3Ln; Ln = Gd, Tb, Dy), and [Ln₂(Br₄bdc)₃(H₂O)_2.3(MeOH)_2.7] (4Ln; Ln = Gd, Tb, Dy) have been synthesized by reacting hydrated lanthanide(III) salts with tetrabromobenzene-1,4-dicarboxylic acid (H₂Br₄bdc) in different solvents under solvothermal conditions. The structural diversity found in the system mainly resulted from the effects of anions, solvents, and the variation in the ionic radii of the lanthanide(III) ions. Compounds in series 1Ln feature a two-dimensional (2D) layered structure with sql topology based on {(Ln(COO)₂)₂(μ-COO)₂} secondary building units (SBUs). Compounds in series 2Ln and 3Ln comprise, respectively, infinite uniform and alternate chains of {Ln(COO)₂}_n SBUs that are assembled into a similar network topology to 1Ln. Meanwhile, compounds in series 4Ln feature 3D coordination networks of a pcu α-Po topological net consisting of binuclear {Ln₂(COO)₃} SBUs. The formation of polymeric networks in series 1Ln-4Ln is facilitated by the numerous coordination sites of the ligand Br₄bdc^2- and the fact that its bromine atoms can participate in the formation of various types of intermolecular interactions. The solid-state photoluminescence studies on Eu- (1Eu) and Tb- (1Tb, 3Tb, 4Tb) containing compounds indicate that the Br₄bdc^2- ligands can efficiently sensitize Eu³⁺ and Tb³⁺ emission. Notably, such compounds exhibit highly sensitive fluorescence sensing for acetone, water, and Fe³⁺ ions via the fluorescence quenching effect. As the representatives of the series, activated 1Eu, 2Pr, 3Tb, and 4Tb show the maximum CO₂ uptake capacities of 170.4, 273.7, 255.3, and 303.5 cm³ g^-1, respectively, at 50 bar and 298 K with good repeatability of the adsorption-desorption properties. Magnetic studies indicate that the Gd- and Dy-based compounds 1Gd, 1Dy, 3Gd, 3Dy, and 4Gd show simple paramagnetic behaviours, whereas compound 4Dy exhibits weak ferromagnetic interactions.

Eu3+- and Tb3+-Based Coordination Complexes of Poly(N-Isopropyl,N-methylacrylamide-stat-N,N-dimethylacrylamide) Copolymer: Synthesis, Characterization and Property

This contribution reports the syntheses, structural analyses and properties of europium (Eu³⁺)- and terbium (Tb³⁺)-based coordination complexes of poly(N-isopropyl,N-methylacrylamide-stat-N,N-dimethylacrylamide) (poly(iPMAm-stat-DMAm)) copolymer, named as poly-Eu(III) and poly-Tb(III), respectively. In greater detail, poly(iPMAm₈₅-stat-DMAm₁₅) is first prepared by random copolymerization of N-isopropyl,N-methylacrylamide (iPMAm) and N,N-dimethylacrylamide (DMAm) via group transfer polymerization (GTP). Next, poly(iPMAm₈₅-stat-DMAm₁₅) is used as the polymer matrix for chelating with Eu³⁺ and Tb³⁺ cations at its side amide groups, to produce poly-Eu(III) and poly-Tb(III). Their structural characterizations by FT-IR spectroscopy and XPS confirm the formation of polymeric complexes. The study on their fluorescence emission characteristics and luminescence lifetime demonstrates that Poly-Eu(III) shows four strong emission peaks at 578, 593, 622, and 651 nm, which are responsible for the electron transitions from the excited ⁵D₀ state to the multiplet ⁷F_J (J = 0, 1, 2, 3) states, respectively, and poly-Tb(III) also displays four emission peaks at 489, 545, 588, and 654 nm, mainly due to the electron transitions of ⁵D₄ → ⁷F_i (i = 6, 5, 4, 3). The luminescence lifetimes of poly-Eu(III) (τ_poly-Eu(III)) and poly-Tb(III) (τ_poly-Tb(III)) are determined to be 4.57 and 7.50 ms, respectively. In addition, in aqueous solutions, poly-Eu(III) and poly-Tb(III) are found to exhibit thermoresponsivity, with their cloud temperatures (T_cs) locating around 36.4 and 36.8 °C, respectively. Finally, the cytotoxicity study on the human colon carcinoma cells LoVo and DLD1 suggests that the luminescent Eu³⁺ and Tb³⁺ in the chelated state with poly(iPMAm-stat-DMAm) show much better biocompatibility and lower toxicity than their inorganic salts.

Three isostructural hexanuclear lanthanide-organic frameworks for sensitive luminescence temperature sensing over a wide range

Temperature sensing plays essential roles in both fundamental research and high-tech applications. In this work, three isomorphic hexanuclear lanthanide metal-organic frameworks (Ln-MOFs), Ln(BPDC-xN) (Ln = Eu³⁺/Tb³⁺, x = 0, 1, 2) were prepared based on the cluster-based synthesis strategy with three structurally similar dicarboxylate ligands 4,4'-biphenyldicarboxylic acid (H₂BPDC-0N), 6-(4-carboxyphenyl)nicotinic acid (H₂BPDC-1N), and [2,2'-bipyridine]-5,5'-dicarboxylic acid (H₂BPDC-2N) as the organic linkers. The as-synthesized Ln-MOFs were fully characterized using single-crystal X-ray diffraction (SCXRD), powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), elemental analysis (EA), and Fourier transform infrared spectra (FT-IR). Using a Eu³⁺/Tb³⁺ co-doping approach, Eu_0.001Tb_0.999(BPDC-xN) (x = 0, 1, 2) were identified as potential ratiometric luminescence thermometers. Since there are two suitable distances between the energy donors and acceptors within the framework for efficient energy transfer, all Eu_0.001Tb_0.999(BPDC-xN) (x = 0, 1, 2) maintain high relative sensitivity over a wide temperature range from 50 K to 300 K.

Preparation and Luminescence Properties of PVDF/ZnS:Mn Flexible Thin-Film Sensors

Flexible luminescent thin-film sensors have attracted widespread attention for their potential applications in biomedical detection, structural health detection, and smart wear. In this work, PVDF/ZnS:Mn flexible luminescent thin-film sensors were fabricated using electro-assisted 3D-printing techniques. The interaction and influence of PVDF thin film and ZnS:Mn were studied. The mechanism through which the PVDF matrix and ZnS:Mn particles affects the luminescence of the flexible thin-film sensor were investigated. The results demonstrate that the ZnS:Mn luminescent particles in PVDF thin films can promote the formation of the β-phase in the PVDF thin films. The mechano-luminesce spectra of the PVDF/ZnS:Mn composite thin film is consistent with the photoluminescence spectra, both of which exhibit yellow light with a wavelength of 580 nm. Mn entering the ZnS lattice increases the number of effective luminescent centres. Because of the double piezoelectric field, when the Mn content of ZnS:Mn is 4 at.% and PVDF films contain 3 wt.% ZnS:Mn particles, the PVDF/ZnS:Mn flexible thin-film sensors demonstrate excellent mechano-luminescence performance.

Information encryption, highly sensitive detection of nitrobenzene, tetracycline based on a stable luminescent Cd-MOF

A stable luminescent Cd-MOF, formulated as [Cd(L)_0.5(4, 4'-bpy)_0.5]·H₂O (1), (H₄L = 1, 1'-ethylbiphenyl -3, 3', 5, 5'- tetracarboxylic acid, 4, 4' -bpy = 4, 4'-bipyridine), is acquired under solvothermal conditions. 1 exhibits stability in the pH range from 1.5 to 12.2 and in different organic solvents. 1 can detect tetracycline and nitrobenzene by fluorescence quenching with high sensitivity and selectivity. The detection limits are 0.14 μM and 14 nM, respectively. Interestingly, 1 can encapsulate Tb³⁺ and sensitize its characteristic peaks. Moreover, the fluorescent ink is prepared by using the luminescent properties of the Tb³⁺@Cd-MOF. The light of the fluorescent ink disappears in an acid gas HCl atmosphere and then reappears in an alkaline gas ammonia atmosphere. This phenomenon can be repeated and the reason for this phenomenon is also explained in the article. Therefore, Tb³⁺@Cd-MOF has huge application potential in information encryption.

Synthesis of a Lanthanide Metal-Organic Framework and Its Fluorescent Detection for Phosphate Group-Based Molecules Such as Adenosine Triphosphate

Adenosine triphosphate (ATP) is an important kind of metabolized biological molecule that is formed in organisms, especially in mitochondria, is used universally as energy, and is one of the most significant multifunctional biological molecules. Metal-organic frameworks (MOFs) have been widely used in many applications such as gas storage and separation, drug delivery, heterogeneous catalysis, chemical sensors, etc. Remarkably, lanthanide MOFs (Ln-MOFs), which display large pores, multiple dimensions, and unique lanthanide luminescence properties, are widely used as chemical sensors. A novel three-dimensional probe, Eu₂(sbdc)₃(H₂O)₃ (Eu-sbdc), was successfully self-assembled with Eu(NO₃)₃·6H₂O and 5,5-dioxo-5H-dibenzo[b,d]thiophene-3,7-dicarboxylic acid (H₂sbdc). The Ln-MOF Eu-sbdc can quickly and effectively optically detect ATP via a luminescent quenching mechanism. The K_sv value of Eu-sbdc is 1.02 × 10⁴ M^-1, and the lower detection limit of Eu-sbdc for ATP is 20 μM, which is more sensitive to ATP. Its mechanism of monitoring ATP might be a dynamic or static quenching process. Eu-sbdc could effectively and quickly recognize ATP with high sensitivity.

In situ ligand-induced Ln-MOFs based on a chromophore moiety: white light emission and turn-on detection of trace antibiotics

Series novel 3D Ln-MOFs containing both carboxyphenyl and pyridinyl moieties have been constructed. Tb-MOF fluorescence turn-on sensor of levofloxacin solution with highly sensitive and excellent selective was achieved through d-PET approach.

Wheel-like Gd42 Polynuclear Complex with Significant Magnetocaloric Effect

Two novel wheel-like lanthanide nanoclusters with 42 nuclearity [Ln42L14(OH)28(OAc)84] (abbreviated as Ln42, 1-Gd; 2-Dy, HL=3-methoxysalicylaldehyde O-vanillin) were structurally and magnetically characterized. The Ln42 species were constructed by O-vanillin and lanthanide...

Dual-emission 3D supramolecular framework hydrogel beads: highly selective detection of antibiotics and mechanism research

Ratiometric fluorescent probes based on coordination polymers (CPs) have been widely applied in optical applications. Therefore, it is very important to develop a dual-emitting gel material based on coordination polymers for specific recognition of molecules. Cu-atda (H₂atda = 3,3'-(4-amino-1,2,4-triazol-3,5-diyl) dibenzoic acid) is synthesized with a porous structure and a large number of amino sites exposed on the surface, which can be regarded as a carrier for fluorescent molecules and well disperse in the SA hydrogel network. A dual-emission Eu³⁺ functionalized CP hydrogel bead (9A/Cu-atda@Eu3+/SA, 9A = 9-anthraldehyde and SA = sodium alginate) is successfully prepared, which presents ratiometric fluorescence detection of flumequine with a low detection limit (48 nM) and high selectivity. Furthermore, it also displays an excellent fluorescence quenching effect on nitrofuran antibiotics, exhibiting a dual functional performance. In addition, the fluorescence response mechanisms of flumequine and nitrofuran antibiotics are discussed in depth. As a portable material, visualization 9A/Cu-atda@Eu3+/SA beads provide an extensive and convenient application prospect for real-time monitoring of antibiotics in the water environment.

Flexible luminescent non-lanthanide metal-organic frameworks as small molecules sensors

Toxic, carcinogenic, and hazardous materials are omnipresent, generally obtained by anthropogenic activities, industrial activities, aerobic and anaerobic degradation of waste materials and are harmful to human health and environment. Thus, sensing, colorimetric detection, and subsequent inclusion of these chemicals are of prime importance for human health and environment. In comparison to other classes of highly porous materials, luminescent metal-organic frameworks (LMOFs) have chromophoric organic ligands, high surface area, high degree of tunability and structural diversity. They have received scientific interest as sensory materials for device fabrication to detect and sense toxic small molecules. Especially, as soft-porous materials exhibiting a degree of flexibility or dynamic behaviour, flexible LMOFs are promising for selective detection and sensing, and for encapsulation of toxic and health hazardous molecules. Such flexible LMOFs offer a potential platform for selective adsorption/separation, molecular recognition, and sensing application. In this perspective, we highlight the advantages of flexibility of LMOFs for selective detection and sensing, and inclusion of toxic small molecules (solvents, anions, halobenzenes, aromatics, aromatic amines, nitro-explosives and acetylacetone). In addition, the principles and strategies guiding the design of these MOF based materials and recent progress in the luminescent detection of toxic small molecules are also discussed. In this perspective we limit our discussion on the 'non-lanthanide' based luminescent MOFs that have flexibility in the framework and show small molecule sensing applications.

Achieving colour tuneable and white-light luminescence in a large family of dual-emission lanthanide coordination polymers

Expanding the family of lanthanide terpyridine coordination polymers has yielded eighteen new complexes with two different phases, Ln(TPC)₂(HCOO)(H₂O) (Ln-1) and Ln(TPC)(HCOO)₂ (Ln-2) (Ln = Sm-Lu, except Tm). Both structures are composed of lanthanide cations interconnected by 2,2':6',2''-terpyridine-4'-carboxylate ligands to yield one-dimensional chain topologies. However, the incorporation of an additional crystallographically unique decorative TPC ligand into Ln-1 gives rises to a distinct phase. The encapsulation of both metal- and ligand-based phosphors within single coordination polymers leads to dual-emission of the afforded materials. Furthermore, judicious lanthanide doping in heterometallic Ln-1 and Ln-2 allows for fine-tuning the photoluminescent colours over a wide range of gamut. Such a combination showcases the capability to fine-tune the emission colours from deep green, to red, and to blue. In addition, direct white-light emission upon UV excitation can be achieved in the Sm_xGd_1-x-1 system.

Bottom-Up Approach for the Rational Loading of Linear Oligomers and Polymers with Lanthanides

The adducts between luminescent lanthanide tris(β-diketonate)s and diimine or triimine ligands have been explored exhaustively for their exceptional photophysical properties. Their formation, stability, and structures in solution, together with the design of extended metallopolymers exploiting these building blocks, remain, however, elusive. The systematic peripheral substitution of tridentate 2,6-bis(benzimidazol-2-yl)pyridine binding units (Lk = L1-L5), taken as building blocks for linear oligomers and polymers, allows a fine-tuning of their affinity toward neutral [Ln(hfa)₃] (hfa = hexafluoroacetylacetonate) lanthanide containers in the [LkLn(hfa)₃] adducts. Two trends emerge with (i) an unusual pronounced thermodynamic selectivity for midrange lanthanides (Ln = Eu) and (ii) an intriguing influence of remote peripheral substitutions of the benzimidazole rings on the affinity of the tridentate unit for [Ln(hfa)₃]. These trends are amplified upon the connection of several tridentate binding units via their benzimidazole rings to give linear segmental dimers (L6) and trimers (L7), which are considered as models for programming linear Wolf-Type II metallopollymers. Modulation of the affinity between the terminal and central binding units in the linear multitridentate ligands deciphers the global decrease of metal-ligand binding strengths with an increase in the length of the receptors (monomer → dimer → trimer → polymer). Application of the site binding model shed light onto the origin of the variation of the thermodynamic affinities: a prerequisite for the programmed loading of a polymer backbone with luminescent lanthanide β-diketonates. Analysis of the crystal structures for these adducts reveals delicate correlations between the chemical bond lengths measured in the solid state (or bond valence parameters) and the metal-ligand affinities operating in solution.

Ultrasound-Assisted Synthesis of Luminescent Micro- and Nanocrystalline Eu-Based MOFs as Luminescent Probes for Heavy Metal Ions

The luminescent coarse-, micro- and nanocrystalline europium(III) terephthalate tetrahydrate (Eu₂bdc₃·4H₂O) metal-organic frameworks were synthesized by the ultrasound-assisted wet-chemical method. Electron micrographs show that the europium(III) terephthalate microparticles are 7 μm long leaf-like plates. According to the dynamic light scattering technique, the average size of the Eu₂bdc₃·4H₂O nanoparticles is equal to about 8 ± 2 nm. Thereby, the reported Eu₂bdc₃·4H₂O nanoparticles are the smallest nanosized rare-earth-based MOF crystals, to the best of our knowledge. The synthesized materials demonstrate red emission due to the ⁵D₀–⁷F_J transitions of Eu³⁺ upon 250 nm excitation into ¹ππ* state of the terephthalate ion. Size reduction results in broadened emission bands, an increase in the non-radiative rate constants and a decrease in both the quantum efficiency of the ⁵D₀ level and Eu³⁺ and the luminescence quantum yields. Cu²⁺, Cr³⁺, and Fe³⁺ ions efficiently and selectively quench the luminescence of nanocrystalline europium(III) terephthalate, which makes it a prospective material for luminescent probes to monitor these ions in waste and drinking water.

A Photoluminescent Ag10 Cu6 Cluster Stablized by a PNNP Ligand and Phenylacetylides Selectively and Reversibly Senses Ammonia in Air and Water

A photoluminescent bimetallic cluster [Ag₁₀ Cu₆ (bdppthi)₂ (C≡CPh)₁₂ (MeOH)₂ (H₂ O)](ClO₄ )₄ (1, bdppthi=N,N'-bis(diphenylphosphanylmethyl)-tetrahydroimidazole} was synthesized from the PNNP type ligand bdppthi generated in-situ. Upon excitation at 365 nm, 1 exhibited strong phosphorescent emission at 630 nm, which was selectively quenched by NH₃ in air or water. The sensing of NH₃ was rapid and recoverable, with detection limits of 53 ppm (v/v) in N₂ and 21 μmol/L (0.36 ppm, w/w) for NH₃  ⋅ H₂ O in water. Cluster 1 could potentially serve as a bifunctional chemical sensor for the efficient detection of ammonia in waste-gas and waste-water.

Structure, Luminescent Sensing and Proton Conduction of a Boiling-Water-Stable Zn(II) Metal-Organic Framework

A novel Zn(II) metal-organic framework [Zn₄O(C₃₀H₁₂F₄O₄S₈)₃]_n, namely ZnBPD-4F4TS, has been constructed from a fluoro- and thiophenethio-functionalized ligand 2,2',5,5'-tetrafluoro-3,3',6,6'-tetrakis(2-thiophenethio)-4,4'-biphenyl dicarboxylic acid (H₂BPD-4F4TS). ZnBPD-4F4TS shows a broad green emission around 520 nm in solid state luminescence, with a Commission International De L'Eclairage (CIE) coordinate at x = 0.264, y = 0.403. Since d¹⁰-configured Zn(II) is electrochemically inert, its photoluminescence is likely ascribed to ligand-based luminescence which originates from the well-conjugated system of phenyl and thiophenethio moieties. Its luminescent intensities diminish to different extents when exposed to various metal ions, indicating its potential as an optical sensor for detecting metal ion species. Furthermore, ZnBPD-4F4TS and its NH₄Br-loaded composite, NH₄Br@ZnBPD-4F4TS, were used for proton conduction measurements in different relative humidity (RH) levels and temperatures. Original ZnBPD-4F4TS shows a low proton conductivity of 9.47 × 10^-10 S cm^-1 while NH₄Br@ZnBPD-4F4TS shows a more than 25,000-fold enhanced value of 2.38 × 10^-5 S cm^-1 at 40 °C and 90% RH. Both of the proton transport processes in ZnBPD-4F4TS and NH₄Br@ZnBPD-4F4TS belong to the Grotthuss mechanism with E_a = 0.40 and 0.32 eV, respectively.

Structural Design of Low Toxicity Metal-Organic Frameworks for Multifunction Detection of Organic and Inorganic Contaminants from Water

Metal-organic frameworks (MOFs)-based sensors for monitoring toxic substances in wastewater have attracted great attention due to the efficient and reliable performance. Here, we has synthesized two novel zinc-based MOFs [Zn(ttb)₂(H₂O)₂]_n (Zn1-ttb) and {[Zn(ttb)₂]·0.5CH₃CN}_n (Zn2-ttb) through changing the polarity of reaction solvents and finally obtained target 2D MOF material [Zn(ttb)(bdc)_0.5]_n(Zn3-ttb-bdc) by successfully introducing an ancillary ligand H₂bdc (Httb = 1-(triazo-1-ly)-4-(tetrazol-5-ylmethyl)benzene, H₂bdc = 1,4-benzenedicarboxylic acid). As-prepared Zn3-ttb-bdc exhibits high water and chemical stability as well as excellent fluorescence property. Due to the -COOH binding sites from H₂bdc, Zn3-ttb-bdc shows high sensitivity and a rapid luminescent response to a representative organic micropollutant trinitrophenol (TNP) and inorganic pollutants (Fe³⁺ and Cr₂O₇^2-) in wastewater. The mechanisms of multifunctional detection abilities of Zn3-ttb-bdc toward different types of pollutants are further studied. This work presents the structural design in preparing MOF materials for multifunctional detection performance, thus opening new perspectives for emerging MOF-based sensors as environmental monitors.