The degradation mechanism of sulfamethoxazole under ozonation: a DFT study

Hydroxylated transformation products of pharmaceutical active compounds: Generation from processes used in wastewater treatment plants and its environmental monitoring

Pharmaceutical active compounds (PhACs) are organic pollutants detected in wastewater and aquatic environments worldwide in concentrations ranging from ng L-1 to μg L-1. Wastewater effluents containing PhACs residues is discharged in municipal sewage and, subsequently collected in municipal wastewater treatment plants (WWTPs) where are not entirely removed. Thus, PhACs and its transformation products (TPs) are discharged into water bodies. In the current work, the transformation of PhACs under treatments used in municipal WWTPs such as biological, photolysis, chlorination, and ozonation processes was reviewed. Data set of the major transformation pathways were obtained of studies that performed the PhACs removal and TPs monitoring during batch-scale experiments using gas and liquid chromatography coupled with tandem mass spectrometry (GC/LC-MS/MS). Several transformation pathways as dealkylation, hydroxylation, oxidation, acetylation, aromatic ring opening, chlorination, dehalogenation, photo-substitution, and ozone attack reactions were identified during the transformation of PhACs. Especially, hydroxylation reaction was identified as transformation pathway in all the processes. During the elucidation of hydroxylated TPs several isobaric compounds as monohydroxylated and dihydroxylated were identified. However, hydroxylated TPs monitoring in wastewater and aquatic environments is a topic scarcely studied due to that has no environmental significance, lack of available analytic standars of hydroxylated TPs and lack of analytic methods for their identification. Thus, screening strategy for environmental monitoring of hydroxylated TPs was proposed through target and suspect screening using GC/LC-MS/MS systems. In the next years, more studies on the hydroxylated TPs monitoring are necessary for its detection in WWTPs effluents as well as studies on their environmental effects in aquatic environments.

Isotopically labeled ozone: A new approach to elucidate the formation of ozonation products

As ozonation becomes a widespread treatment for removal of chemicals of emerging concern from wastewater treatment plant effluents, there are increasing concerns regarding the formation of ozonation products (OPs), and their possible impacts on the aquatic environment and eventually human health. In this study, a novel method was developed that utilizes heavy oxygen (¹⁸O₂) for the production of heavy ozone ([¹⁸O₁]O₂, [¹⁸O₂]O₁, [¹⁸O₃]) to actively label OPs from oxygen transfer reactions. To establish and validate this new approach, venlafaxine with a well-described oxygen transfer reaction (tertiary amine -> N-oxide) was chosen as a model compound. Observed ¹⁸O/¹⁶O ratios in the major OP venlafaxine N-oxide (NOV) correlated with expected ¹⁸O purities based on tracer experiments. These results confirmed the successful labeling with heavy oxygen and furthermore demonstrate the potential to monitor NOV as an indicator of ¹⁸O/¹⁶O ratios during ozonation. As a next step, ¹⁸O/¹⁶O ratios were used to elucidate the formation mechanism of previously described OPs from sulfamethoxazole (SMX). Seven OPs were detected including the frequently described nitro-SMX, which was formed with a maximum yield of 3.2% (of initial SMX). With the successful labeling of six of the seven OPs from sulfamethoxazole, it was possible to confirm their previously proposed formation pathways, and to distinguish oxygen transfer from electron transfer reactions. ¹⁸O/¹⁶O ratios in OPs indicate that hydroxylation of the aromatic ring and formation of nitro-groups mostly follows oxygen transfer reactions, while electron transfer reactions initiate the formation of hydroxylamine and the abstraction of NH₂ leading to catechol.

Catalytic Ozonation of Norfloxacin Using Co-Mn/CeO2 as a Multi-Component Composite Catalyst

In this study, a Co-Mn/CeO2 composite was prepared through a facile sol-gel method and used as an efficient catalyst for the ozonation of norfloxacin (NOR). The Co-Mn/CeO2 composite was characterized via XRD, SEM, BET and XPS analysis. The catalytic ozonation of NOR by Co-Mn/CeO2 under different conditions was systematically investigated, including the effect of the initial solution’s pH, Co-Mn/CeO2 composite dose, O3 dose and NOR concentration on degradation kinetics. Only about 3.33% of total organic carbon (TOC) and 72.17% of NOR could be removed within 150 min by single ozonation under the conditions of 60 mg/L of NOR and 200 mL/min of O3 at pH= 7 and room temperature, whereas in the presence of 0.60 g/L of the Co-Mn/CeO2 composite under the same conditions, 87.24% NOR removal was obtained through the catalytic ozonation process. The results showed that catalytic ozonation with the Co-Mn/CeO2 composite could effectively enhance the degradation and mineralization of NOR compared to a single ozonation system alone. The catalytic performance of CeO2 was significantly improved by the modification with Mn and Co. Co-Mn/CeO2 represents a promising way to prepare efficient catalysts for the catalytic ozonation of organic polluted water. The removal efficiency of NOR in five cycles indicates that Co-Mn/CeO2 is stable and recyclable for catalytic ozonation in water treatment.

Metabolism of the Pyrethroid Insecticide Momfluorothrin in Lettuce (Lactuca sativa L.)

The metabolism of the insecticide momfluorothrin (1), 2,3,5,6-tetrafluoro-4-(methoxymethyl)benzyl (EZ)-(1R,3R)-3-(2-cyanoprop-1-enyl)-2,2-dimethylcyclopropanecarboxylate, 14C-labeled at the benzyl or cyclopropyl carbon, was investigated in lettuce. The metabolic profiles were similar between the two active ingredients, 1-R-trans-Z and 1-R-trans-E. On the leaf surface, 1 gradually volatilized and penetrated into the plant with concomitant degradation to form aldehyde/carboxylic acid derivatives via oxidative cleavage of the propenyl double bond. No isomerization of 1 proceeded at any chiral carbon. In the leaf tissues, 1 underwent ester hydrolysis to give the corresponding alcohol and chrysanthemic acid moieties, followed by glucose conjugation and successive malonic acid or ribose modification. Assuming O3 or 1O2 as the major reactant for the degradation on the plant, the reactivity with the alkenyl group in the substructure methyl (1R,3R)-3-[(Z)-2-cyanoprop-1-enyl]-2,2-dimethylcyclopropane-1-carboxylate was estimated from the HOMO/LUMO energy at the B3LYP/6-311+G** level, which indicated a lower potential of 1 than analogous pyrethroids due to its electron-withdrawing cyano group.

Ferrate(VI) Oxidation Mechanism of Substituted Anilines: A Density Functional Theory Investigation

Ferrate(VI) (Fe(VI)) is a promising oxidant coagulant and disinfectant for the degradation of organic micropollutants. However, it is hard to elucidate the detailed oxidation mechanism through the current experimental approaches. Substituted anilines (SANs) are important chemical compounds that are widely used in many industries. This paper presents the use of density functional theory (DFT) to understand the oxidation mechanism of SANs by Fe(VI) and the effect of substituents. The calculation results revealed that the primary oxidations of SANs follow the hydrogen atom transfer (HAT) mechanism. Interestingly, the hydroxyl oxygen of HFeO₄ ^- is more reactive than the carbonyl oxygen when reacting with SANs. The formation of the SAN radical is crucial, and all of the products are formed from it. Azobenzene is more favorable to generate the above products. In addition, the obtained results indicate that this kind of substituent has a much greater influence on the reaction rather than the position. Thus, the present study provides a valuable insight into the transformation pathways of SANs in the Fe(VI) oxidation process and the effects of the substituent on oxidation. These results will advance the understanding of Fe(VI) involved in wastewater treatment.

NDMA formation mechanisms from typical hydrazines and hydrazones during ozonation: A computational study

N-nitrosodimethylamine (NDMA) as the most frequently detected disinfection by-product has aroused widespread concern due to its unusually high carcinogenicity, however, there is still limited understanding of its formation mechanisms. In this study, the formation mechanisms of NDMA from some typical hydrazines and hydrazones with high NDMA conversion yields (60%∼90%) during ozonation, i.e., unsymmetrical dimethylhydrazine (UDMH), 1-formyl-2,2-dimethylhydrazine (FDMH), formaldehyde dimethylhydrazone (FDH) and acetone dimethylhydrazone (ADMH), were investigated by using DFT method with the M05 functional. A new NDMA formation mechanism from hydrazines during ozonation was proposed, in which the initial step is hydrogen abstraction rather than previously reported oxygen addition. For hydrazones, the C atom of the -N = C moiety in hydrazones is preferred to be attacked by ozone to generate N,N-dimethylaminonitrene (DMAN), which is an important intermediate in NDMA formation during ozonation. Moreover, the reactivity order of the following H atoms in hydrogen/hydride ion abstraction (HA) by ozone is -NH₂ > -N(CH₃)₂ > -CO-NH ∼ =C(CH₃)₂ > =CH-. Additionally, formation pathways of some experimentally detected compounds, i.e., HOOOH, HOOH and HCOH, in the ozonation of hydrazine were elucidated in this study. The results are expected to expand our understanding of NDMA formation mechanisms and ozone reaction characteristics.

Products and Mechanistic Investigations on the Reactions of Hydrazines with Ozone in Gas-Phase

The toxic transformation products of hydrazines are of great concern. These products’ properties combined with their formation mechanisms are needed to assess their potential environmental and human impacts. In this study, the gas-phase reaction of hydrazine (N2H4), monomethyldrazine (MMH) and unsymmetrical dimethyhydrazine (UDMH) with O3 have been studied at varying reactant ratios, both in the presence and absence of a radical trap. Gas chromatography-mass spectroscopy (GC-MS) has been implied to follow reactant consumption and product formation. Apart from the reported products detected by Fourier transform infrared spectroscopy (FT-IR), the newly found compounds (hydrazones, formamides, dimethylamine, 1,1,4,4-tetramethyl-1,2-tetrazene,dimethylamino-acetonitrile, N2, H2O, et al.) are identified by GC-MS. The relative yields of the organic products vary considerably at different O3/MMH or UDMH ratios. UDMH and MMH are confirmed as high potential precursors of N-nitrosodimethylamine (NDMA). The presence of hydroxyl radicals (HO·) hinders NDMA formation in MMH-O3 system. Meanwhile, it increases NDMA formation in UDMH-O3 system. The suggested reaction mechanisms which account for the observed products are discussed.

Degradation of sulfamethoxazole using ozone and chlorine dioxide - Compound-specific stable isotope analysis, transformation product analysis and mechanistic aspects

The sulfonamide antibiotic sulfamethoxazole (SMX) is a widely detected micropollutant in surface and groundwaters. Oxidative treatment with e.g. ozone or chlorine dioxide is regularly applied for disinfection purposes at the same time exhibiting a high potential for removal of micropollutants. Especially for nitrogen containing compounds such as SMX, the related reaction mechanisms are largely unknown. In this study, we systematically investigated reaction stoichiometry, product formation and reaction mechanisms in reactions of SMX with ozone and chlorine dioxide. To this end, the neutral and anionic SMX species, which may occur at typical pH-values of water treatment were studied. Two moles of chlorine dioxide and approximately three moles of ozone were consumed per mole SMX degraded. Oxidation of SMX with ozone and chlorine dioxide leads in both cases to six major transformation products (TPs) as revealed by high-resolution mass spectrometry (HRMS). Tentatively formulated TP structures from other studies could partly be confirmed by compound-specific stable isotope analysis (CSIA). However, for one TP, a hydroxylated SMX, it was not possible by HRMS alone to identify whether hydroxylation occurred at the aromatic ring, as suggested in literature before, or at the anilinic nitrogen. By means of CSIA and an analytical standard it was possible to identify sulfamethoxazole hydroxylamine unequivocally as one of the TPs of the reaction of SMX with ozone as well as with chlorine dioxide. H-abstraction and electron transfer at the anilinic nitrogen are suggested as likely initial reactions of ozone and chlorine dioxide, respectively, leading to its formation. Oxidation of anionic SMX with ozone did not show any significant isotopic fractionation whereas the other reactions studied resulted in a significant carbon isotope fractionation.

History of EPI Suite™ and future perspectives on chemical property estimation in US Toxic Substances Control Act new chemical risk assessments

Chemical property estimation is a key component in many industrial, academic, and regulatory activities, including in the risk assessment associated with the approximately 1000 new chemical pre-manufacture notices the United States Environmental Protection Agency (US EPA) receives annually. The US EPA evaluates fate, exposure and toxicity under the 1976 Toxic Substances Control Act (amended by the 2016 Frank R. Lautenberg Chemical Safety for the 21^st Century Act), which does not require test data with new chemical applications. Though the submission of data is not required, the US EPA has, over the past 40 years, occasionally received chemical-specific data with pre-manufacture notices. The US EPA has been actively using this and publicly available data to develop and refine predictive computerized models, most of which are housed in EPI Suite™, to estimate chemical properties used in the risk assessment of new chemicals. The US EPA develops and uses models based on (quantitative) structure-activity relationships ([Q]SARs) to estimate critical parameters. As in any evolving field, (Q)SARs have experienced successes, suffered failures, and responded to emerging trends. Correlations of a chemical structure with its properties or biological activity were first demonstrated in the late 19^th century and today have been encapsulated in a myriad of quantitative and qualitative SARs. The development and proliferation of the personal computer in the late 20^th century gave rise to a quickly increasing number of property estimation models, and continually improved computing power and connectivity among researchers via the internet are enabling the development of increasingly complex models.