Nonlinear spectral and lifetime management in upconversion nanoparticles by controlling energy distribution

Polarized Upconversion of sub-100 nm Single Nanoparticles

Upconversion nanoparticles are popular as imaging probes due to their advantages in photostability and controllable emission dimensions. However, upconversion polarization remains largely uncharted with previous reports limited to microstructures. In this work, we report the observation of polarized upconversion emissions from β-NaYF4 single nanostructures below 100 nm. At the sub-100 nm scale, nanorods, nanodiscs, and nanoplates exhibit distinctive polarization degrees despite the same doping concentrations of lanthanides. We find this varied polarization degree results from the crystallographic orientation of nanostructure in relation to the light field and can be linked to the distinctive emission spectrum profile with varied Stark splitting transition ratios from Er3+. Our findings provide a comprehensive understanding of the polarization properties of upconversion nanoparticles, revealing a previously unexplored aspect of light emission. This discovery expands our knowledge of upconversion nanoparticles and also opens new possibilities for their use in future imaging and sensing applications, where polarization sensitivity is crucial.

Boosting Dye-Sensitized Luminescence by Enhanced Short-Range Triplet Energy Transfer

Dye-sensitization can enhance lanthanide-based upconversion luminescence, but is hindered by interfacial energy transfer from organic dye to lanthanide ion Yb3+ . To overcome these limitations, modifying coordination sites on dye conjugated structures and minimizing the distance between fluorescence cores and Yb3+ in upconversion nanoparticles (UCNPs) are proposed. The specially designed near-infrared (NIR) dye, disulfo-indocyanine green (disulfo-ICG), acts as the antenna molecule and exhibits a 2413-fold increase in luminescence under 808 nm excitation compared to UCNPs alone using 980 nm irradiation. The significant improvement is attributed to the high energy transfer efficiency of 72.1% from disulfo-ICG to Yb3+ in UCNPs, with majority of energy originating from triplet state (T1 ) of disulfo-ICG. Shortening the distance between the dye and lanthanide ions increases the probability of energy transfer and strengthens the heavy atom effect, leading to enhanced T1 generation and improved dye-triplet sensitization upconversion. Importantly, this approach also applies to 730 nm excitation Cy7-SO3 sensitization system, overcoming the spectral mismatch between Cy7 and Yb3+ and achieving a 52-fold enhancement in luminescence. Furthermore, the enhancement of upconversion at single particle level through dye-sensitization is demonstrated. This strategy expands the range of NIR dyes for sensitization and opens new avenues for highly efficient dye-sensitized upconversion systems.

Tm3+; Yb3+:Zn2TiO4 near infrared to blue upconversion phosphors for anti-counterfeit applications

Tm3+; Yb3+:Zn2TiO4 samples have been synthesized using a solid state reaction route. The phase, lattice parameters, crystallite size has been examined using X-ray Diffraction (XRD) and high resolution transmission electron microscopy (HRTEM). An intense peak of Yb3+ codoped samples is observed near ∼957 nm due to the 2F7/2 → 2F5/2 transition in diffuse reflectance spectra (DRS), which confirms the presence of Yb3+ ion in the prepared compound. The optical band gap of Yb3+ codoped samples has been calculated using Kubelka-Munk function. The Raman spectra corresponds to incorporation of Tm3+/Yb3+ at the octahedral and tetrahedral site of the spinel host. The emission spectra recorded by using 370 nm excitation wavelength shows intense blue colour band corresponding to the 1G4 → 3H6 transition of Tm3+ ion. The upconversion (UC) emission spectra recorded by using 980 nm laser excitation source shows emission bands due to the 1G4 → 3H6, 1G4 → 3F4 and 3H4 → 3H6 transitions of Tm3+ ion in the host matrix lying in the blue, red and NIR regions respectively. There is effective enhancement of about ∼35 times in the blue UC emission intensity with incorporation of Yb3+ at 3% doping concentration in the prepared sample. The anti-counterfeit application of the optimized upconverting phosphor has been successfully demonstrated.

Plasmon Modulated Upconversion Biosensors

Over the past two decades, lanthanide-based upconversion nanoparticles (UCNPs) have been fascinating scientists due to their ability to offer unprecedented prospects to upconvert tissue-penetrating near-infrared light into color-tailorable optical illumination inside biological matter. In particular, luminescent behavior UCNPs have been widely utilized for background-free biorecognition and biosensing. Currently, a paramount challenge exists on how to maximize NIR light harvesting and upconversion efficiencies for achieving faster response and better sensitivity without damaging the biological tissue upon laser assisted photoactivation. In this review, we offer the reader an overview of the recent updates about exciting achievements and challenges in the development of plasmon-modulated upconversion nanoformulations for biosensing application.

Photon Upconversion in Small Molecules

Upconversion (UC) is a process that describes the emission of shorter-wavelength light compared to that of the excitation source. Thus, UC is also referred to as anti-Stokes emission because the excitation wavelength is longer than the emission wavelength. UC materials are used in many fields, from electronics to medicine. The objective of using UC in medical research is to synthesize upconversion nanoparticles (UCNPs) composed of a lanthanide core with a coating of adsorbed dye that will generate fluorescence after excitation with near-infrared light to illuminate deep tissue. Emission occurs in the visible and UV range, and excitation mainly in the near-infrared spectrum. UC is observed for lanthanide ions due to the arrangement of their energy levels resulting from f-f electronic transitions. Organic compounds and transition metal ions are also able to form the UC process. Biocompatible UCNPs are designed to absorb infrared light and emit visible light in the UC process. Fluorescent dyes are adsorbed to UCNPs and employed in PDT to achieve deeper tissue effects upon irradiation with infrared light. Fluorescent UCNPs afford selectivity as they may be activated only by illumination of an area of diseased tissue, such as a tumor, with infrared light and are by themselves atoxic in the absence of infrared light. UCNP constructs can be monitored as to their location in the body and uptake by cancer cells, aiding in evaluation of exact doses required to treat the targeted cancer. In this paper, we review current research in UC studies and UCNP development.

Synchronous enhancement of upconversion and NIR-IIb photoluminescence of rare-earth nanoprobes for theranostics

This study develops a multifunctional molecular optical nanoprobe (SiO₂@Gd₂O₃: Yb³⁺/Er³⁺/Li⁺@Ce6/MC540) with a unique core-satellite form. The rare-earth doped nanodots with good crystallinity are uniformly embedded on the surface of a hydrophilic silica core, and the nanoprobe can emit near-infrared-IIb (NIR-IIb) luminescence for imaging as well as visible light that perfectly matches the absorption bands of two included photosensitizers under 980 nm irradiation. The optimal NIR-IIb emission and upconversion efficiency are attainable via regulating the doping ratios of Yb³⁺, Er³⁺ and Li⁺ ions. The relevant energy transfer mechanism was addressed theoretically that underpins rare-earth photoluminescence where energy back-transfer and cross relaxation processes play pivotal roles. The nanoprobe can achieve an excellent dual-drive photodynamic treatment performance, verified by singlet oxygen detections and live-dead cells imaging assays, with a synergistic effect. And a brightest NIR-IIb imaging was attained in tumoral site of mouse. The nanoprobe has a high potential to serve as a new type of optical theranostic agent for tumor.

Luminescent Lifetime Regulation of Lanthanide-Doped Nanoparticles for Biosensing

Lanthanide-doped nanoparticles possess numerous advantages including tunable luminescence emission, narrow peak width and excellent optical and thermal stability, especially concerning the long lifetime from microseconds to milliseconds. Differing from other shorter-lifetime fluorescent nanomaterials, the long lifetime of lanthanide-doped nanomaterials is independent with background fluorescence interference and biological tissue depth. This review presents the recent advances in approaches to regulating the lifetime and applications of bioimaging and biodetection. We begin with the introduction of the strategies for regulating the lifetime by modulating the core-shell structure, adjusting the concentration of sensitizer and emitter, changing energy transfer channel, establishing a fluorescence resonance energy transfer pathway and changing temperature. We then summarize the applications of these nanoparticles in biosensing, including ion and molecule detecting, DNA and protease detection, cell labeling, organ imaging and thermal and pH sensing. Finally, the prospects and challenges of the lanthanide lifetime regulation for fundamental research and practical applications are also discussed.

Evaluation of relative beam-profile-compensated quantum yield of upconverting nanoparticles over a wide dynamic range of power densities

The presented work uses a discrete strategy of beam profile compensation to evaluate the local internal quantum yield (iQY) of upconverting nanoparticles (UCNPs) at the pixel level of the beam profile using a compact CMOS camera. The two-photon process of upconversion with a central emission peak at 804 nm was studied for a β-phase core-shell Tm-codoped UCNP under 976 nm excitation. At the balancing power density point, ρ_b, found to be 44 ± 3 W cm^-2, the iQY, η_b, was obtained as 2.3 ± 0.1%. Combining the power density dynamic range provided by the pixel depth of the camera with the dynamic range achieved using two distinct beam profiles to excite the UCNPs, the iQY was evaluated throughout a range of 10⁴ in the iQY scale (from 0.0003% to 4.6%) and 10⁶ in power densities of excitation (from 0.003 W cm^-2 to 1050 W cm^-2). To the best of our knowledge, these are the lowest values ever obtained as QY results have never been reported under 0.02% or at excitation power densities below 0.01 W cm^-2.

Near infrared bioimaging and biosensing with semiconductor and rare-earth nanoparticles: recent developments in multifunctional nanomaterials

Research in novel materials has been extremely active over the past few decades, wherein a major area of interest has been nanoparticles with special optical properties. These structures can overcome some of the intrinsic limitations of contrast agents routinely used in medical practice, while offering additional functionalities. Materials that absorb or scatter near infrared light, to which biological tissues are partially transparent, have attracted significant attention and demonstrated their potential in preclinical research. In this review, we provide an at-a-glance overview of the most recent developments in near infrared nanoparticles that could have far-reaching applications in the life sciences. We focus on materials that offer additional functionalities besides diagnosis based on optical contrast: multiple imaging modalities (multimodal imaging), sensing of physical and chemical cues (multivariate diagnosis), or therapeutic activity (theranostics). Besides presenting relevant case studies for each class of optically active materials, we discuss their design and safety considerations, detailing the potential hurdles that may complicate their clinical translation. While multifunctional nanomaterials have shown promise in preclinical research, the field is still in its infancy; there is plenty of room to maximize its impact in preclinical studies as well as to deliver it to the clinics.

High-Fidelity NIR-II Multiplexed Lifetime Bioimaging with Bright Double Interfaced Lanthanide Nanoparticles

Fluorescence lifetime imaging provides more possibility of in vivo multiplexing in second near infrared (NIR-II) window. However, it still faces the obstacle that fluorescent probes with differentiable lifetime often exhibit quite different fluorescence intensity, especially the short lifetime usually accompanies with a weak fluorescence intensity, resulting in the difficulty for simultaneously decoding multiplexed lifetime information due to the interference of background noise. To facilitate high-fidelity lifetime multiplexed imaging, we developed a series of Er³⁺ doped double interface fluorescent nanoprobes (Er-DINPs): α-NaYF₄ @NaErF₄ : Ce@NaYbF₄ @NaErF₄ : Ce@NaYF₄ with strong fluorescence intensity and easily distinguishable fluorescence lifetime. Both in vitro and in vivo experimental results confirmed the advantage of these probes with comparable fluorescence intensity for high-fidelity multiplexed lifetime bioimaging.

Super-Resolution Imaging With Lanthanide Luminescent Nanocrystals: Progress and Prospect

Stimulated emission depletion (STED) nanoscopy has overcome a serious diffraction barrier on the optical resolution and facilitated new discoveries on detailed nanostructures in cell biology. Traditional fluorescence probes employed in the super-resolution imaging approach include organic dyes and fluorescent proteins. However, some limitations of these probes, such as photobleaching, short emission wavelengths, and high saturation intensity, still hamper the promotion of optical resolution and bio-applications. Recently, lanthanide luminescent probes with unique optical properties of non-photobleaching and sharp emissions have been applied in super-resolution imaging. In this mini-review, we will introduce several different mechanisms for lanthanide ions to achieve super-resolution imaging based on an STED-like setup. Then, several lanthanide ions used in super-resolution imaging will be described in detail and discussed. Last but not least, we will emphasize the future challenges and outlooks in hope of advancing the next-generation lanthanide fluorescent probes for super-resolution optical imaging.

Independent Luminescent Lifetime and Intensity Tuning of Upconversion Nanoparticles by Gradient Doping for Multiplexed Encoding

Luminescent materials with engineered optical properties have been developed for multiplexed labeling detection, where encoding capacity plays a pivotal role in the efficiency. However, multi-dimensional optical identities are usually not independent which essentially hinder the practical encoding numbers to access theoretical capacity. In this work, we carefully studied the sensitizer gradient doping structure in near-infrared (NIR) excitable upconversion nanoparticles (UCNPs) and managed to achieve independent emission intensity and lifetime tuning. With the orthogonally tunability, it breaks the constraint of intensity (k) and lifetime (n) correlation and expands the practical encoding number to theoretical value as (k+1)ⁿ -1 in binary encoding. This method can also be combined with previous lifetime engineering as well to realize high level multiplexing.

Lanthanide-Doped Near-Infrared Nanoparticles for Biophotonics

Light in the near-infrared (NIR) spectral region is increasingly utilized in bioapplications, providing deeper penetration in biological tissues owing to the lower absorption and scattering in comparison with light in the visible range. Lanthanide-doped luminescent nanoparticles with excitation and/or emission in the NIR range have recently attracted tremendous attention as one of the prime candidates for noninvasive biological applications due to their unique optical properties, such as large Stokes shift, spectrally sharp luminescence emissions, long luminescence lifetimes, and excellent photostability. Herein, recent advances of lanthanide-doped nanoparticles with NIR upconversion or downshifting luminescence and their uses in cutting-edge biophotonic applications are presented. A set of efficient strategies for overcoming the fundamental limit of low luminescence brightness of lanthanide-doped nanoparticles is introduced. An in-depth literature review of their state-of-art biophotonics applications is also included, showing their superiority for high-resolution imaging, single-nanoparticle-level detection, and efficacy for tissue-penetrating diagnostics and therapeutics.

Recent advances of lanthanide-doped upconversion nanoparticles for biological applications

Near infrared (NIR) excited lanthanide-doped upconversion nanoparticles (UCNPs) are emerging as a new type of fluorescent tag for biological applications, which can emit multi-photon ultraviolet, visible or NIR luminescence for imaging or activation of photosensitive molecules. Here, we present a comprehensive review on recent advances of UCNPs for a manifold of biological applications, including upconversion mechanisms, building bright multicolor upconversion nanocrystals, single nanoparticle and super resolution imaging, in vivo optical and multimodal imaging, photodynamic therapy, light-controlled drug release, biosensing, and toxicities. Our perspectives on the future development of UCNPs are also described.

Anti-escaping of incident laser in rare-earth doped fluoride ceramics with glass forming layer

Adaptive fluoride ceramic with glass forming layer (GC_ZBL-Er) used in laser anti-escaping has been prepared by one-step synthesis, and the thickness of glass layer is identified as ~0.41 mm. Blue, green and red emissions of Er³⁺/Yb³⁺ codoped fluoride ceramic (C_ZBL-Er) and glass layer (G_ZBL-Er) have been investigated under ~980 nm laser pumping. With the forming of thin glass layer on ceramic surface, the absorption intensities on diffuse reflection of GC_ZBL-Er at 974 nm and 1.53 μm increase by 48% and 53% than those of C_ZBL-Er. Excited by a 979 nm laser, the presence of the glass layer increases the absolute absorption rate in spectral power from 75% in C_ZBL-Er to 83% in GC_ZBL-Er, which is consistent with the improvement in the absorbed photon number. In addition, the quantum yield of GC_ZBL-Er complex is raised by 28.4% compared to the case of ceramic substrate by photon quantification. Intense absorption-conversion ability and efficient macroscopical anti-escaping effect confirm the superiority of ingenious structure in the fluoride ceramics with glass forming layer, which provides a new approach for developing the absorption-conversion materials of anti-NIR laser detection.

Temperature Rise under Two-Photon Optogenetic Brain Stimulation

In recent decades, optogenetics has been transforming neuroscience research, enabling neuroscientists to drive and read neural circuits. The recent development in illumination approaches combined with two-photon (2P) excitation, either sequential or parallel, has opened the route for brain circuit manipulation with single-cell resolution and millisecond temporal precision. Yet, the high excitation power required for multi-target photostimulation, especially under 2P illumination, raises questions about the induced local heating inside samples. Here, we present and experimentally validate a theoretical model that makes it possible to simulate 3D light propagation and heat diffusion in optically scattering samples at high spatial and temporal resolution under the illumination configurations most commonly used to perform 2P optogenetics: single- and multi-spot holographic illumination and spiral laser scanning. By investigating the effects of photostimulation repetition rate, spot spacing, and illumination dependence of heat diffusion, we found conditions that make it possible to design a multi-target 2P optogenetics experiment with minimal sample heating.

Compact and Filter-Free Luminescence Biosensor for Mobile in Vitro Diagnoses

We report a sensitive and versatile biosensing approach, LUCID (luminescence compact in vitro diagnostics), for quantitative molecular and cellular analyses. LUCID uses upconversion nanoparticles (UCNPs) as luminescent reporters in mutually exclusive photoexcitation and read-out sequences implemented on a smartphone. The strategy improves imaging signal-to-noise ratios, eliminating interference from excitation sources and minimizing autofluorescence, and thus enables filterless imaging. Here we developed a miniaturized detection system and optimized UCNPs for the system and biological applications. Nanoparticle luminescence lifetime was extended by controlling particle structure and composition. When tested with a range of biological targets, LUCID achieved high detection sensitivity (0.5 pM for protein and 0.1 pM for nucleic acids), differentiated bacterial samples, and allowed profiling of cells. In proof-of-concept clinical use, LUCID demonstrated effective screening of cancer cells in cervical brushing specimens, identifying patients at high risk for malignancy. These results suggest that LUCID could serve as a broadly applicable and inexpensive diagnostic platform.

Thermal Enhancement of Upconversion by Negative Lattice Expansion in Orthorhombic Yb2 W3 O12

Thermal quenching of photoluminescence represents a significant obstacle to practical applications such as lighting, display, and photovoltaics. Herein, a novel strategy is established to enhance upconversion luminescence at elevated temperatures based on the use of negative thermal expansion host materials. Lanthanide-doped orthorhombic Yb₂ W₃ O₁₂ crystals are synthesized and characterized by in situ X-ray diffraction and photoluminescence spectroscopy. The thermally induced contraction and distortion of the host lattice is demonstrated to enhance the collection of excitation energy by activator ions. When the temperature is increased from 303 to 573 K, a 29-fold enhancement of green upconversion luminescence in Er³⁺ activators is achieved. Moreover, the temperature dependence of the upconversion luminescence is reversible. The thermally enhanced upconversion is developed as a sensitive ratiometric thermometer by referring to a thermally quenched upconversion.

Excitation of erbium-doped nanoparticles in 1550-nm wavelength region for deep tissue imaging with reduced degradation of spatial resolution

Rare-earth-doped nanoparticles are one of the emerging probes for bioimaging due to their visible-to-near-infrared (NIR) upconversion emission via sequential single-photon absorption at NIR wavelengths. The NIR-excited upconversion property and high photostability make this probe appealing for deep tissue imaging. So far, upconversion nanoparticles include ytterbium ions (Yb3  +  ) codoped with other rare earth ions, such as erbium (Er3  +  ) and thulium (Tm3  +  ). In these types of upconversion nanoparticles, through energy transfer from Yb3  +   excited with continuous wave light at a wavelength of 980 nm, upconversion emission of the other rare earth dopants is induced. We have found that the use of the excitation of Er3  +   in the 1550-nm wavelength region allows us to perform deep tissue imaging with reduced degradation of spatial resolution. In this excitation–emission process, three and four photons of 1550-nm light are sequentially absorbed, and Er3  +   emits photons in the 550- and 660-nm wavelength regions. We demonstrate that, compared with the case using 980-nm wavelength excitation, the use of 1550-nm light enables us to moderate degradation of spatial resolution in deep tissue imaging due to the lower light scattering coefficient compared with 980-nm light. We also demonstrate that live cell imaging is feasible with this 1550 nm excitation.

A critical comparison of lanthanide based upconversion nanoparticles to fluorescent proteins, semiconductor quantum dots, and carbon dots for use in optical sensing and imaging

The right choice of a fluorescent probe is essential for successful luminescence imaging and sensing and especially concerning in vivo and in vitro applications, the development of new classes have gained more and more attention in the last years. One of the most promising class are upconversion nanoparticles (UCNPs)-inorganic nanocrystals capable to convert near-infrared light in high energy radiation. In this review we will compare UCNPs with other fluorescent probes in terms of (a) the optical properties of the probes, such as their brightness, photostability and excitation wavelength; (b) their chemical properties such as the dispersibility, stability under experimental or physiological conditions, availability of chemical modification strategies for labelling; and (c) the potential toxicity and biocompatibility of the probe. Thereby we want to provide a better understanding of the advantages and drawbacks of UCNPs and address future challenges in the design of the nanocrystals.

Self-sensitization induced upconversion of Er3+ in core-shell nanoparticles

A mechanistic study of upconversion from lanthanides is of great importance for the fundamental research of upconversion materials and their diverse frontier applications. However, the most efficient upconversion of lanthanides is still obtained in a commonly used sensitizer-activator coupled system. Here we report a mechanistic investigation on the upconversion of Er3+ through self-sensitization which is applicable for 808, 980 and 1530 nm excitations. It is found that the cooperative energy transfer upconversion followed by cross-relaxation occurring among Er3+ ions plays a critical role in producing and enhancing the red upconversion for the samples with high dopant concentrations (e.g., >20 mol%). The red upconversion color can be further purified and enhanced by mediating the upconversion dynamics through introducing the lanthanides of Ho3+, Tm3+ and Yb3+, which can effectively contribute to the population in the red emitting state. Moreover, the energy migration in the Er-sublattice was also found to be a possible origin for quenching upconversion, which was proved and effectively suppressed by designing a tri-layered nanostructure where the distribution of Er3+ is spatially controllable. Our results gain access into the insight of upconversion dynamics in self-sensitization induced upconversion which would help the search for other new kinds of upconversion materials.

Remote manipulation of upconversion luminescence

The precise control over the luminescence profile of lanthanide-doped upconversion nanomaterials is of fundamental importance for their applications in wide-ranging fields of research. Conventional chemical approaches can lead to color-tunable emissions, but they generally require stringent modification either on dopant composition or doping concentration. In this Tutorial Review, we highlight a number of complementary methods that offer remote dynamic modulation of upconversion luminescence across the visible spectrum. This review serves to provide a summary of existing guidelines for controlling the emission spectrum of upconversion nanocrystals with fixed materials composition. The review will also discuss the major approaches to manipulating excitation energies and consider likely research challenges for further development of the field at the interface between nanotechnology and biological science.

Markedly enhanced up-conversion luminescence by combining IR-808 dye sensitization and core–shell–shell structures

The up-conversion emission of core–shell–shell structured nanoparticles has been greatly enhanced by IR-808 dye sensitization of 808 nm photons.

Comprehensive studies of the Li+ effect on NaYF4:Yb/Er nanocrystals: morphology, structure, and upconversion luminescence

Impurity doping plays a critical role in altering the properties of target nanomaterials in terms of designed morphologies, crystal structures, and functionalities.