Simultaneous tunable structure and composition of PtAg alloyed nanocrystals as superior catalysts

Multifunctional Ti3C2Tx MXene/Silver Nanowire Membranes with Excellent Catalytic, Antifouling, and Antibacterial Properties for Nitrophenol-Containing Water Purification

The uncontrolled release of nitrophenol and dye pollutants into water systems is an increasingly serious worldwide concern, and thus efficient wastewater treatment technologies are urgently needed. Herein we report a novel two-dimensional (2D) transition metal carbides and/or nitrides (Ti3C2Tx MXene) membrane modified with silver nanowires (AgNWs) by vacuum assisted filtration technology for the ultrafast nitrophenol catalysis and water purification applications. Regular and controllable membrane transport channels were constructed by stacking Ti3C2Tx MXene nanosheets. Furthermore, the intercalation of AgNWs into the Ti3C2Tx MXene interlayer greatly enlarged the interlayer spacing, resulting in more gaps for fast and selective molecular transport. The optimized Ti3C2Tx MXene@AgNWs (M@A) membrane exhibited a water flux up to ∼191.9 L/(m2 h) while maintaining a high bovine serum albumin (BSA) rejection of ∼95.4%. We emphatically used M@A membranes as efficient catalysts for the reduction of 4-nitrophenol (4-NP), and the results indicated that M@A-12% membrane exhibited the greatest catalytic reduction ability, and recycling utilization. M@A-12% membrane also had an antibacterial rate of more than 99% against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). This work provides a possibility to expand the application of 2D multifunctional M@A membranes in wastewater treatment and pollutant catalytic degradation.

Structural Analysis and Intrinsic Enzyme Mimicking Activities of Ligand-Free PtAg Nanoalloys

Nanozymes are nanomaterials with biocatalytic properties under physiological conditions and are one class of artificial enzymes to overcome the high cost and low stability of natural enzymes. However, surface ligands on nanomaterials will decrease the catalytic activity of the nanozymes by blocking the active sites. To address this limitation, ligand-free PtAg nanoclusters (NCs) are synthesized and applied as nanozymes for various enzyme-mimicking reactions. By taking advantage of the mutual interaction of zeolitic imidazolate frameworks (ZIF-8) and Pt precursors, a good dispersion of PtAg bimetal NCs with a diameter of 1.78 ± 0.1 nm is achieved with ZIF-8 as a template. The incorporation of PtAgNCs in the voids of ZIF-8 is confirmed with structural analysis using the atomic pair-distribution function and powder X-ray diffraction. Importantly, the PtAgNCs present good catalytic activity for various enzyme-mimicking reactions, including peroxidase-/catalase- and oxidase-like reactions. Further, this work compares the catalytic activity between PtAg NCs and PtAg nanoparticles with different compositions and finds that these two nanozymes present a converse dependency of Ag-loading on their activity. This study contributes to the field of nanozymes and presents a potential option to prepare ligand-free bimetal biocatalysts with sizes in the nanocluster regime.

Facile electrooxidation of ethanol on reduced graphene oxide supported Pt-Pd bimetallic nanocomposite surfaces in acidic media

Development of electrocatalysts with extended homogeneity and improved metal-support interactions is of urgent scientific need in the context of electrochemical energy applications. Herein, bimetallic Pt-Pd nanoparticles with good homogeneity are fabricated using a convenient solution phase chemical reduction method onto a reduced graphene oxide (rGO) support. X-ray diffraction studies revealed that Pt-Pd/rGO possesses the crystallite size of 3.1 nm. The efficacies of Pt-Pd/rGO catalyst (20 wt% Pt + 10 wt% Pd on rGO support, Pt:Pd atomic ratio = 1:1) towards ethanol electrooxidation reaction (EOR) are evaluated in acidic conditions by cyclic voltammetry using catalyst-coated glassy carbon electrode as a working electrode. With the better dispersion on rGO support the Pt-Pd/rGO nancomposite catalyst exhibit highest mass specific activity (0.358 mA/µg-Pt) which is observed to be 1.9 times of similarly synthesized 20 wt% Pt/rGO (0.189 mA/µg-Pt) and 2.5 times of commercial 20 wt% Pt/C (0.142 mA/µg-Pt), respectively. Apart from the observed improved EOR activity, the Pt-Pd/rGO catalyst exhibited better stability than Pt/rGO and Pt/C catalysts. Strong synergy offered by Pt, Pd and rGO support could contribute to the observed higher EOR activity of Pt-Pd/rGO.

Platinum-Based Electrocatalysts for Direct Alcohol Fuel Cells: Enhanced Performances toward Alcohol Oxidation Reactions

In the past few decades, Pt-based electrocatalysts have attracted great interests due to their high catalytic performances toward the direct alcohol fuel cell (DAFC). However, the high cost, poor stability, and the scarcity of Pt have markedly hindered their large-scale utilization in commerce. Therefore, enhancing the activity and durability of Pt-based electrocatalysts, reducing the Pt amount and thus the cost of DAFC have become the keys for their practical applications. In this minireview, we summarized some basic concepts to evaluate the catalytic performances in electrocatalytic alcohol oxidation reaction (AOR) including electrochemical active surface area, activity and stability, the effective approaches for boosting the catalytic AOR performance involving size decrease, structure and morphology modulation, composition effect, catalyst supports, and assistance under other external energies. Furthermore, we also presented the remaining challenges of the Pt-based electrocatalysts to achieve the fabrication of a real DAFC.

Promoting Effects of Au Submonolayer Shells on Structure-Designed Cu-Pd/Ir Nanospheres: Greatly Enhanced Activity and Durability for Alkaline Ethanol Electro-Oxidation

Rationally engineering the surface physicochemical properties of nanomaterials can improve their activity and durability for various electrocatalytic and energy conversion applications. Cu-Pd/Ir (CPI) nanospheres (NSs) anchored on N-doped porous graphene (NPG) [(CPI NSs/NPG)] have been recently demonstrated as a promising electrocatalyst for the alkaline ethanol oxidation reaction (EOR); to further enhance their electrocatalytic performance, the NPG-supported CPI NSs are coated with Au submonolayer (SML) shells (SMSs), through which their surface physicochemical properties can be tuned. CPI NSs/NPG is prepared by our previously developed method and possesses the special structures of composition-graded Cu₁Pd₁ and surface-doped Ir_0.03. The Au SMSs with designed surface coverages are formed via an electrochemical technology involving incomplete Cu underpotential deposition (UPD) and Au³⁺ galvanic replacement. A distinctive volcano-type relation between the EOR electrocatalytic activity and the Au-SMS surface coverage for CPI@Au_SML NSs/NPG is revealed, and the optimal CPI@Au_1/6ML NSs/NPG greatly surpasses commercial Pd/C and CPI NSs/NPG in electrocatalytic activity and noble metal utilization. More importantly, its electrocatalytic durability in 1 h chronoamperometric and 500-cycle potential cycling degradation tests is also significantly improved. According to detailed physicochemical characterizations, electrochemical analyses, and density functional theory calculations, the promoting effects of the Au SMS for enhancing the EOR electrocatalytic activity and durability of CPI NSs/NPG can be mainly attributed to the greatly weakened carbonaceous intermediate bonding and properly increased surface oxidation potential. This work also proposes a versatile and effective strategy to tune the surface physicochemical properties of metal-based nanomaterials via incomplete UPD and metal-cation galvanic replacement for advancing their electrocatalytic and energy conversion performance.

Realization of red plasmon shifts by the selective etching of Ag nanorods

The red plasmon shifts is realized through selective deposition of Au atoms and etching of Ag atoms on the Ag nanorods.

Improved LSPR Properties of Ag–Pt and Pt Nanoparticles: A Systematic Study on Various Configurations and Compositions of NPs via the Solid-State Dewetting of Ag–Pt Bilayers

The localized surface plasmon resonance (LSPR) of noble metal nanoparticles (NPs) has become an important research topic in various fields and can be systematically tuned to obtain the desired device performance through the appropriate structural and elemental modifications. In this research, the improved LSPR properties of Pt NPs and diverse configurations and compositions of Ag–Pt bimetallic alloy NPs were demonstrated on sapphire (0001) via the solid-state dewetting (SSD) of Ag–Pt bilayers. A strong and dynamic LSPR response in the ultraviolet (UV) and visible (VIS) regions was demonstrated depending on the elemental composition and surface morphology of the NPs, which is discussed along with finite difference time domain (FDTD) simulations. In comparison, the Ag–Pt NPs exhibited stronger LSPR excitation, whereas the Pt NPs showed a relatively weaker and broader response. Meanwhile, the Pt NPs fabricated in this study still demonstrated a much-enhanced LSPR response compared to previous studies on the solid-state dewetting of pure Pt films due to improvements in configuration, uniformity, and interparticle gaps. Various surface morphologies of NPs, such as connected nanoclusters, elongated NPs, and isolated spherical NPs, were obtained on the basis of alloying, diffusion, Rayleigh instability, and a surface minimization mechanism, which were different from those of pure Ag and Pt NPs in similar growth conditions. Particularly, one-step annealing of an Ag–Pt bilayer yielded Ag–Pt alloy NPs below 600 °C, which subsequently transformed into pure Pt NPs above 650 °C, in which the high diffusivity and high vapor pressure of Ag atoms significantly facilitated the overall growth process of the NPs.

Selective Electro-Oxidation of Glycerol to Dihydroxyacetone by PtAg Skeletons

Developing high-performance electrocatalysts for the selective conversion of glycerol into value-added chemicals is of great significance. Herein, three-dimensional nanoporous PtAg skeletons were studied as catalysts for the electro-oxidation of glycerol. The structural features of the PtAg skeletons were revealed by electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and UV-vis spectroscopy. The electrochemical activity of the catalysts was examined by cyclic voltammetry, linear sweeping voltammetry, and chronoamperometry. The resulting PtAg skeletons exhibit a peak current density of 7.57 mA cm^-2, which is 15.4-fold higher than that of Pt/C, making the PtAg skeletons one of the best electrocatalysts for glycerol oxidation. High-performance liquid chromatography results show that the PtAg skeletons yield a remarkable dihydroxyacetone selectivity of 82.6%, which has so far been the second largest value reported in the literature. The superior activity and selectivity of the PtAg skeletons are ascribed to the large surface area and abundant Pt(111) facets. Additionally, the effects of glycerol and KOH concentrations and reaction time on product selectivity were investigated.

Localized surface plasmon enhanced electrocatalytic methanol oxidation of AgPt bimetallic nanoparticles with an ultra-thin shell

AgPt bimetallic hollow nanoparticles (AgPt-BHNPs) with an ultra-thin shell were synthesized.

Hollow Ag44Pt56 nanotube bundles with high electrocatalytic performances for hydrogen evolution and ethylene glycol oxidation reactions

It is a main challenge to synthesize highly efficient and durable nanocatalysts towards hydrogen evolution reaction (HER) and alcohol oxidation reaction in energy conversion and storage. Herein, a green wet-chemical approach was developed to directly prepare hollow Ag₄₄Pt₅₆ nanotube bundles (H-Ag₄₄Pt₅₆ NTBs), utilizing 5-azacytosine as a structure-directing agent. The obtained electrocatalyst displayed superior catalytic activity and durability for HER in acid media, and the great improvement in catalytic performance for ethylene glycol oxidation reaction (EGOR) in the alkaline electrolyte, outperforming home-made Ag₃₄Pt₆₆ nanoparticles (NPs), Ag₇₀Pt₃₀ NPs, and commercial Pt/C catalysts. The high electrocatalytic characters are mainly attributed to the special nanostructures and the synergetic effects between the bimetals.