Water-Based Synthesis of β-Sheet-Like Supramolecular Metallohydrogel Organized by Using a Native Ultrashort Peptide Sequence

Designing supramolecular hydrogels using short peptides is challenging. To control self-assembly, a certain amount of organic solvent is typically added to the system, or the short peptide is modified with a functional group that is hydrophobic, hydrophilic, or highly coordinative. We discovered that l-His-l-Ile-l-Thr (HIT), a very short unmodified "native" tripeptide, selectively responds to Cu2+ ions in pure water to form a transparent supramolecular metallohydrogel. Circular dichroism analysis revealed that Cu2+ ions, but no other metal species, caused HIT to change from a random-coil-like to a β-sheet-like structure. Other spectroscopic methods were used to characterize the properties of the supramolecular metallohydrogel. These results are expected to facilitate the development of native short peptides as advanced functional biomaterials.

Exploration of a wide bandgap semiconducting supramolecular Mg(II)-metallohydrogel derived from an aliphatic amine: a robust resistive switching framework for brain-inspired computing

A rapid metallohydrogelation strategy has been developed of magnesium(II)-ion using trimethylamine as a low molecular weight gelator in water medium at room temperature. The mechanical property of the synthesized metallohydrogel material is established through the rheological analysis. The nano-rose like morphological patterns of Mg(II)-metallohydrogel are characterized through field emission scanning electron microscopic study. The energy dispersive X-ray elemental mapping analysis confirms the primary gel forming elements of Mg(II)-metallohydrogel. The possible metallohydrogel formation strategy has been analyzed through FT-IR spectroscopic study. In this work, magnesium(II) metallohydrogel (Mg@TMA) based metal-semiconductor-metal structures have been developed and charge transport behaviour is studied. Here, it is confirmed that the magnesium(II) metallohydrogel (Mg@TMA) based resistive random access memory (RRAM) device is showing bipolar resistive switching behaviour at room temperature. We have also explored the mechanism of resistive switching behaviour using the formation (rupture) of conductive filaments between the metal electrodes. This RRAM devices exhibit excellent switching endurance over 10,000 switching cycles with a large ON/OFF ratio (~ 100). The easy fabrication techniques, robust resistive switching behaviour and stability of the present system makes these structures preferred candidate for applications in non-volatile memory design, neuromorphic computing, flexible electronics and optoelectronics etc.

A 5-aminoisophthalic acid low molecular weight gelator based novel semiconducting supramolecular Zn(ii)-metallogel: unlocking an efficient Schottky barrier diode for microelectronics

A novel method has been successfully developed for creating supramolecular metallogels using zinc(ii) ions and 5-aminoisophthalic acid as the gelator (low molecular weight gelator) in a dimethylformamide (DMF) solvent at room temperature. Comprehensive rheological investigations confirm the robust mechanical strength of the resulting zinc(ii)-metallogel. Microstructural analysis conducted through field-emission scanning electron microscopy (FESEM) unveils a unique flake-like morphology, with energy-dispersive X-ray (EDX) elemental mapping confirming the prevalence of zinc as the primary constituent of the metallogel. To understand the formation mechanism of this metallogel, Fourier-transform infrared (FT-IR) spectroscopy was employed. Notably, these supramolecular zinc(ii)-metallogel assemblies exhibit electrical conductivity reminiscent of metal-semiconductor (MS) junction electronic components. Surprisingly, the metallogel-based thin film device showcases an impressive electrical conductivity of 1.34 × 10-5 S m-1. The semiconductor characteristics of the synthesized zinc(ii)-metallogel devices, including their Schottky barrier diode properties, have been extensively investigated. This multifaceted study opens up a promising avenue for designing functional materials tailored for electronic applications. It harnesses the synergistic properties of supramolecular metallogels and highlights their significant potential in the development of semiconductor devices. This work represents a novel approach to the creation of advanced materials with unique electronic properties, offering exciting prospects for future innovations in electronic and semiconductor technologies.

Recent Advances in Stimuli-Responsive Metallogels

Recently, stimuli-responsive supramolecular gels have received significant attention because their properties can be modulated through external stimuli such as heat, light, electricity, magnetic fields, mechanical stress, pH, ions, chemicals and enzymes. Among these gels, stimuli-responsive supramolecular metallogels have shown promising applications in material science because of their fascinating redox, optical, electronic and magnetic properties. In this review, research progress on stimuli-responsive supramolecular metallogels in recent years is systematically summarized. According to external stimulus sources, stimuli-responsive supramolecular metallogels, including chemical, physical and multiple stimuli-responsive metallogels, are discussed separately. Moreover, challenges, suggestions and opportunities regarding the development of novel stimuli-responsive metallogels are presented. We believe the knowledge and inspiration gained from this review will deepen the current understanding of stimuli-responsive smart metallogels and encourage more scientists to provide valuable contributions to this topic in the coming decades.

Strategic fabrication of efficient photo-responsive semiconductor electronic diode-devices by Bovine Serum Albumin protein-based Cu(II)-metallohydrogel scaffolds

Bovine Serum Albumin protein-based two fascinating functional self-healing Cu(II) metallohydrogel scaffolds (MD1 and MD2) have been studied for the development of metal-semiconductor junction based Schottky diode device. Multiple metal-semiconductor (MS) junction devices, offering the sandwich-like configuration of Indium tin oxide (ITO)/ metallogel/Aluminium (Al), have been made-up to investigate the electrical properties of the synthesized metallohydrogel materials. Optical characterizations including optical band gap measurement have been carried out using Tauc's equation for both the metallohydrogels. The current-voltage (I-V) characteristics of just made-up devices are studied under irradiation and non- irradiation conditions to explore the electrical features through investigating the charge transport phenomenon. The electrical conductivity gets estimated as 3.13 × 10^-5 S.m^-1 and 2.69 × 10^-5 S.m^-1 for MD1 and MD2 under dark condition, and 11.06 × 10^-5 S.m^-1 and 5.99 × 10^-5 S.m^-1 for MD1 and MD2, respectively, in photo-irradiation. The measured optical and electrical properties of MD1 and MD2 metallohydrogels are thoroughly investigated and the data indicates that MD1 and MD2 metallohyrogels are semiconducting in nature with excellent photo-responsive behaviour. Moreover, the representative I - V characteristic of the MD1 and MD2 metallohydrogels at both irradiation and non-irradiation conditions represents the nonlinear rectifying behaviour, a typical signature for Schottky diode (SD).

A multistimulus-responsive self-healable supramolecular copper(ii)-metallogel derived from l-(+) tartaric acid: an efficient Schottky barrier diode

A low molecular weight gelator l-(+) tartaric acid- based self-healing supramolecular Cu(ii)-metallogel offers an electronic device of Schottky barrier diode at room temperature.

Controlling Syneresis of Hydrogels Using Organic Salts

Supramolecular hydrogels can spontaneously undergo syneresis through fibre–fibre interactions and expel significant amounts of water upon aging. In this process, the hydrophobicity of fibres which regulates the 3D‐rearrangement of the self‐assembled structures during syneresis is important. Here, we show that we can control the hydrophobic microenvironment of gels by incorporating organic salts into the co‐assembled gel fibres thereby enabling control of the macroscopic gel volume phase transition.

Stimuli responsive dynamic transformations in supramolecular gels

Supramolecular gels are formed by the self-assembly of small molecules under the influence of various non-covalent interactions. As the interactions are individually weak and reversible, it is possible to perturb the gels easily, which in turn enables fine tuning of their properties. Synthetic supramolecular gels are kinetically trapped and usually do not show time variable changes in material properties after formation. However, such materials potentially become switchable when exposed to external stimuli like temperature, pH, light, enzyme, redox, and chemical analytes resulting in reconfiguration of gel matrix into a different type of network. Such transformations allow gel-to-gel transitions while the changes in the molecular aggregation result in alteration of physical and chemical properties of the gel with time. Here, we discuss various methods that have been used to achieve gel-to-gel transitions by modifying a pre-formed gel material through external perturbation. We also describe methods that allow time-dependent autonomous switching of gels into different networks enabling synthesis of next generation functional materials. Dynamic modification of gels allows construction of an array of supramolecular gels with various properties from a single material which eventually extend the limit of applications of the gels. In some cases, gel-to-gel transitions lead to materials that cannot be accessed directly. Finally, we point out the necessity and possibility of further exploration of the field.

Triethylenetetramine-Based Semiconducting Fe(III) Metallogel: Effective Catalyst for Aryl-S Coupling

A fascinating way to originate a mechanically stable metallogel of ferric ions with metal-coordinating organic ligand triethylenetetramine through direct mixing of their water solutions in a stoichiometric ratio is achieved under ambient conditions. The rheological study established the mechanical property of the Fe(III) metallogel. A cashew-shaped microstructure of the metallogel was observed by FESEM analysis. The electrical property of the Fe(III) metallogel was also carefully scrutinized. The semiconducting features like the Schottky barrier diode property of the Fe(III) metallogel were explored. The catalytic role of the Fe(III) metallogel was also critically explored. The Fe(III) metallogel shows an excellent catalytic property toward the synthesis of aryl thioethers via a C-S coupling reaction under mild reaction conditions without the use of any organic solvent.

Supramolecular Peptide Gels: Influencing Properties by Metal Ion Coordination and Their Wide-Ranging Applications

Supramolecular gels have been an area of interest in many research fields. They provide a means to understand assembly of nanostructures, and through the use of amino acid- and peptide-based gelators they can give insights into the similar assembly pathways of their more complex structural counterparts. Bio-inspired metal coordination, such as histidine-copper coordination, in the supramolecular assembly of these gelators is one method for furthering our understanding and development of these materials. Metal-gelator coordination mimics biologically relevant metal-peptide coordination, thus influencing hydrogel self-assembly and mechanical properties, including biodegradability, biocompatibility, tunability, and recyclablity, while the metal coordination can functionalize the gels to allow for widespread applications in biomedical industries (e.g., drug delivery), waste management, and catalysis. This review aims to discuss recent insights into the supramolecular assembly of gels involving metal ions, as well as a few key areas of application using metal interactions and incorporation.

A heat-set lanthanide metallogel capable of emitting stable luminescence under thermal, mechanical and water stimuli

A luminescence-stable lanthanide-based metallogel prepared by a heat-set procedure.

Assembly of (l+d)-Tryptophan Derivatives Containing an Imidazole Group Selectively Forms a Rare Purple Ni2+-Hydrogel

Design of metal-selective hydrogels is attractive due to potential applications in materials and biological sciences. Although much progress has been made, assembly of both l- and d-amino acid derivatives was less explored for design of metallohydrogels. In this study, we synthesized a facile and small tryptophan derivative containing an imidazole ligand with both l- and d- configurations (denoted as l/d-ImW). Intriguingly, the assembly of (l+d)-ImW gelators was found to selectively form a Ni2+-hydrogel in aqueous medium at room temperature, which shows a rare purple color and exhibits excellent multi-responsiveness. In addition to insights into the gelation mechanism, this study provides a novel approach to the design of metallohydrogels, by the assembly of (l+d)-amino acid derivatives containing both aromatic rings and multiple metal coordination sites.

A novel supramolecular AIE π-gel for fluorescence detection and separation of metal ions from aqueous solution

A novel supramolecular aggregation induced emission (AIE) π-gel (ONT) was constructed by using a functionalized trimesic amide (TCP) molecule assembled with a bis-pyridine functionalized naphthalene diimide (ND) molecule using a non-covalent interaction. The ONT showed strong AIE at 468 nm. Furthermore, the ONT could detect and adsorb ferric (Fe³⁺) or cupric (Cu²⁺) ions from water. Meanwhile, a thin film based on supramolecular AIE π-gel ONT was prepared, which could be used as a fluorescent security display material for detecting Fe³⁺ or Cu²⁺. Thus, the AIE π-gel ONT shows potential for practical applications in efficient multi-analyte detection and separation and as a fluorescent display material.

Chirality control of multi-stimuli responsive and self-healing supramolecular metallo-hydrogels

The spontaneous formation of supramolecular metallo-hydrogels showing multi stimuli-responsiveness and intrinsic self-healing properties upon the interaction of chiral-histidine with Zn²⁺ ions.

A supramolecular self-assembly material based on a quinoline derivative and its sensitive response toward volatile acid and organic amine vapors

A new gelator 1, containing a quinoline group, was designed, synthesized, and fully characterized.