A review of carbon nanomaterials/bacterial cellulose composites for nanomedicine applications

Carbon nanomaterials (CNMs) mainly include fullerene, carbon nanotubes, graphene, carbon quantum dots, nanodiamonds, and their derivatives. As a new type of material in the field of nanomaterials, it has outstanding physical and chemical properties, such as minor size effects, substantial specific surface area, extremely high reaction activity, biocompatibility, and chemical stability, which have attracted widespread attention in the medical community in the past decade. However, the single use of carbon nanomaterials has problems such as self-aggregation and poor water solubility. Researchers have recently combined them with bacterial cellulose to form a new intelligent composite material to improve the defects of carbon nanomaterials. This composite material has been widely synthesized and used in targeted drug delivery, biosensors, antibacterial dressings, tissue engineering scaffolds, and other nanomedicine fields. This paper mainly reviews the research progress of carbon nanomaterials based on bacterial cellulose in nanomedicine. In addition, the potential cytotoxicity of these composite materials and their components in vitro and in vivo was discussed, as well as the challenges and gaps that need to be addressed in future clinical applications.

Rheological insights on Carboxymethyl cellulose hydrogels

Hydrogels are copiously studied for tissue engineering, drug delivery, and bone regeneration owing to their water content, mechanical strength, and elastic behaviour. The preparation of stable and mechanically strengthened hydrogels without using toxic crosslinkers and expensive approaches is immensely challenging. In this study, we prepared Carboxymethyl cellulose based hydrogels with different polymer concentration via a less expensive physical crosslinking approach without using any toxic crosslinkers and evaluated their mechanical strength. In this hydrogel system, the carbopol concentration was fixed at 1 wt/v% and the Carboxymethyl cellulose concentration was varied between 1 and 5 wt/v%. In this hydrogel system, Carbopol serves as the crosslinker to bridge Carboxymethyl cellulose polymer through hydrogen bonds. Rheological analysis was employed in assessing the mechanical properties of the prepared hydrogel, in particular, the viscoelastic behaviour of the hydrogels. The viscoelastic nature and mechanical strength of the hydrogels increased with an increase in the Carboxymethyl cellulose polymer concentration. Further, our results suggested that gels with Carboxymethyl cellulose concentration between 3 wt/v % and 4 wt/v % with yield stresses of 58.83 Pa and 81.47 Pa, respectively, are potential candidates for use in transdermal drug delivery. The prepared hydrogels possessed high thermal stability and retained their gel network structure even at 50 °C. These findings are beneficial for biomedical applications in transdermal drug delivery and tissue engineering owing to the biocompatibility, stability, and mechanical strength of the prepared hydrogels.

TEMPO-Oxidized Cellulose Nanofibril Films Incorporating Graphene Oxide Nanofillers

To design a new system of novel TEMPO-oxidized cellulose nanofibrils (TOCNs)/graphene oxide (GO) composite, 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-mediated oxidation was utilized. For the better dispersion of GO into the matrix of nanofibrillated cellulose (NFC), a unique process combining high-intensity homogenization and ultrasonication was adopted with varying degrees of oxidation and GO percent loadings (0.4 to 2.0 wt%). Despite the presence of carboxylate groups and GO, the X-ray diffraction test showed that the crystallinity of the bio-nanocomposite was not altered. In contrast, scanning electron microscopy showed a significant morphological difference in their layers. The thermal stability of the TOCN/GO composite shifted to a lower temperature upon oxidation, and dynamic mechanical analysis signified strong intermolecular interactions with the improvement in Young's storage modulus and tensile strength. Fourier transform infrared spectroscopy was employed to observe the hydrogen bonds between GO and the cellulosic polymer matrix. The oxygen permeability of the TOCN/GO composite decreased, while the water vapor permeability was not significantly affected by the reinforcement with GO. Still, oxidation enhanced the barrier properties. Ultimately, the newly fabricated TOCN/GO composite through high-intensity homogenization and ultrasonification can be utilized in a wide range of life science applications, such as the biomaterial, food, packaging, and medical industries.

Carboxymethyl cellulose@multi wall carbon nanotubes functionalized with Ugi reaction as a new curcumin carrier

In recent years, the fabrication of new drug delivery systems (DDSs) based on functionalization by multi-component reactions (MCRs) has received special attention. In this regard, to obtain a new oral administration system for colon-specific cancer treatment, the CMC@MWCNTs@FCA carrier was designed and prepared from the functionalization of the CMC@MWCNTs as a biocompatible raw material with carboxamide group by the Ugi reaction. FT-IR analysis confirmed the successful synthesis of the product through the change in the functional groups of reagents. Additionally, the crystalline structure and porosity of the samples were studied by XRD and BET techniques. After a detailed characterization, the curcumin (CUR) was loaded on CMC@MWCNTs and CMC@MWCNTs@FCA, respectively, about 29 % and 38 %. In vitro drug release behavior studies for CUR-loaded CMC@MWCNTs@FCA showed the controlled release for it, so 11.6 % and 76.5 % of CUR, respectively were released at pH 1.2 and pH 7.4. Toxicological analysis displayed the IC₅₀ of CMC@MWCNTs@FCA@CUR is 752 μg/mL. In conclusion, the obtained findings display that the fabricated system can be proposed as a biocompatible carrier for specific colon cancer treatment.

Enhanced aqueous dissolution of hydrophobic apixaban via direct incorporation of hydrophilic nanographene oxide

In this study, we have directly incorporated nanographene oxide (nGO) into a hydrophobic drug for enhanced dissolution performance through an antisolvent technique. Apixaban (APX) drug composites were synthesized with nGO incorporation ranging from 0.8% to 2.0% concentration. It was observed that the nGO was successfully embedded without any changes to the original drug crystal structure or physical properties. Dissolution of the drug composites was evaluated using US Pharmacopeia Paddle Method (USP 42). The time needed to reach a 50% release (T₅₀) reduced from 106 min to 24 min with the integration of 1.96% nGO in APX and the T₈₀ also dropped accordingly. Alternatively, dissolution rate showed promising performance with increase in nGO concentration. Initial dissolution rate increased dramatically from 74 µg/min to 540 µg/min. Further, work done in intestinal media revealed T₅₀ went from not dissolving to 79.0 min. Decreased lipophilicity or logP value and increased aqueous solubility are both accredited to hydrophilic nGO water dispersion, producing a hydrophilic channel into the drug crystal surfaces through intermolecular interaction. Additionally, physical, and chemical characterizations confirm that hydrophobic apixaban was successfully transformed into a hydrophilic composite, showing potential for this technology to improve dissolution rate of a model hydrophobic compound.

Recent advances in the hybridization of cellulose and carbon nanomaterials: Interactions, structural design, functional tailoring, and applications

Due to the good biocompatibility and flexibility of cellulose and the excellent optical, electronic, as well as mechanical properties of carbon nanomaterials (CNMs), cellulose/CNM hybrid materials have been widely synthesized and used in energy storage, sensors, adsorption, biomedicine, and many other fields. In this review, we present recent advances (2016-current) in the design, structural design, functional tailoring and various applications of cellulose/CNM hybrid materials. For this aim, first the interactions between cellulose and CNMs for promoting the formation of cellulose/CNM materials are analyzed, and then the hybridization between cellulose with various CNMs for tailoring the structures and functions of hybrid materials is introduced. Further, abundant applications of cellulose/CNM hybrid materials in various fields are presented and discussed. This comprehensive review will be helpful for readers to understand the functional design and facile synthesis of cellulose-based nanocomposites, and to promote the high-performance utilization and sustainability of biomass materials in the future.

Cytocompatible drug delivery hydrogels based on carboxymethylagarose/chitosan pH-responsive polyelectrolyte complexes

Several drugs are chemically unstable in the gastric environment and have low bioavailability restricted by intestinal absorption, which motivates the development of alternative routes for drug release, such as transdermal drug carriers for drug delivery to specific areas of the skin. Herein, novel polyelectrolyte complexes (PEC) consisting of carboxymethylagarose (CMA) and chitosan (CS) were prepared. pH-responsive CMA/CS hydrogels were obtained by mixing CMA and CS at various weight ratios. Swelling ratio was modulated by varying the CMA and CS weight ratio, and the highest swelling values were achieved for 2:1 wt% hydrogels at 25 °C and pH 6.0. PEC films were characterized by ATR-FTIR spectroscopy, TGA, DSC, and SEM. Results indicated that CMA and CS were successfully crosslinked by ionic complexation. As a model drug, diclofenac sodium (DS) was loaded in CMA/CS PECs. Association efficiency and loading capacity were ca. 69% and 79%, respectively, exhibiting 67% cumulative release after 72 h at 37 °C and pH 6.0 through Fickian diffusion mechanism. Viability assay of immortalized human keratinocyte (HaCat) cells showed ca. 100% survival in the presence of hydrogels and DS. Therefore, this work suggests that CMA/CS PECs can be applied as pH-responsive carriers for dermal drug delivery.

The Impact of MOF in pH-dependent Drug Delivery System: Progress in Last Decade

Metal-organic frameworks (MOFs) are porous crystalline materials of one-, two-, or three-dimensional networks manufactured from metal ions/clusters and multidentate organic linkers through coordination bonding. MOFs are one of the most...

Pharmaceutical Perspective in Wearable Drug Delivery Systems

Humans have been dealing with health problems for millions of years. Normal health services need well-trained personnel and high-cost diagnostic tests, which forces patients to go to hospitals if medical treatment is required. To address this, prototype testing has been carried out into the wearable drug delivery health care perspectives. Researchers have devised a wide variety of formulations for the treatment of various diseases at home by performing real-time monitoring of different routes of drug administration such as ocular, transdermal, intraoral, intracochlear, and several more. A comprehensive review of the different types of wearable drug delivery systems with respect to their manufacturing, mechanism of action and specifications has been done. In the pharmaceutical context, these devices are technologically well-equipped interfaces for diverse physicochemical signals. Above mentioned information with a broader perspective has also been discussed in this article. Several wearable drug delivery systems have been introduced in the market in recent years. But a lot of testing needs to be conducted to address the numerous obstacles before the wearable devices are successfully launched in the market.

Combinatorial microneedle patch with tunable release kinetics and dual fast-deep/sustained release capabilities

Transdermal microneedle (MN) drug delivery patches, comprising water-soluble polymers, have played an essential role in diverse biomedical applications, but with limited development towards fast deep release or sustained delivery applications. The effectiveness of such MN delivery patches strongly depends on the materials from which they are constructed. Herein, we present a dual-action combinatorial programmable MN patch, comprising of fast and sustained-release MN zones, with tunable release kinetics towards delivering a wide range of therapeutics over different timeframes in single application. We demonstrate the fine tuning of MN materials; the patches can be tailored to deliver a first payload faster and deeper within minutes, while simultaneously delivering a second payload over long times ranging from weeks to months. The active and rapid burst release relies on embedding biodegradable Mg microparticle 'engines' in dissolvable MNs while the sustained release is attributed to biocompatible polymers that allow prolonged release in a controllable tunable manner. In addition, the patches are characterized and optimized for their design, materials and mechanical properties. These studies indicate that such programmable dual-action versatile MN platform is expected to improve therapeutic efficacy and patient compliance, achieving powerful benefits by single patch application at low manufacturing cost.

A signal-on electrochemical aptasensor based on silanized cellulose nanofibers for rapid point-of-use detection of ochratoxin A

An innovative ultrasensitive electrochemical aptamer-based sensor was developed for ochratoxin A (OTA) detection in cold brew coffee through revolutionary combination of nanofibers, electrochemical method, and aptamer technologies. The assembly of the aptasensor was based on the activation of silanized cellulose nanofibrous membranes as a supporting matrix for methylene blue (MB) redox probe-labeled aptamer tethering. Cellulose nanofibrous membranes were regenerated by deacetylating electrospun cellulose acetate nanofibrous membranes with deacetylation efficacy of 97%, followed by silanization of the nanofiber surfaces by using (3-aminopropyl)triethoxysilane (APTES). A replacement of conventionally casted membranes by the nanofibrous membranes increased the active surface area on the working electrode of a screen-printed three-electrode sensor by more than two times, consequently enhancing the fabricated aptasensor performance. The developed aptasensor demonstrated high sensitivity and specificity toward OTA in a range 0.002-2 ng mL^-1, with a detection limit of 0.81 pg mL^-1. Moreover, the assembled aptamer-based sensor successfully detected OTA in cold brew coffee samples without any pretreatment. The aptasensor exhibited good reusability and stability over long storage time. Graphical abstract.

Carbohydrate-based nanomaterials for biomedical applications

Carbohydrates are abundant biomolecules, with a strong tendency to form supramolecular networks. A host of carbohydrate-based nanomaterials have been exploited for biomedical applications. These structures are based on simple mono- or disaccharides, as well as on complex, polymeric systems. Chemical modifications serve to tune the shapes and properties of these materials. In particular, carbohydrate-based nanoparticles and nanogels were used for drug delivery, imaging, and tissue engineering applications. Due to the reversible nature of the assembly, often based on a combination of hydrogen bonding and hydrophobic interactions, carbohydrate-based materials are valuable substrates for the creations of responsive systems. Herein, we review the current research on carbohydrate-based nanomaterials, with a particular focus on carbohydrate assembly. We will discuss how these systems are formed and how their properties are tuned. Particular emphasis will be placed on the use of carbohydrates for biomedical applications. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

Microcapsule-embedded hydrogel patches for ultrasound responsive and enhanced transdermal delivery of diclofenac sodium

Transdermal delivery of diclofenac sodium (DS) has drawn much attention for the advantages of avoiding first-pass metabolism, reduced systemic toxicity and better patient compliance, but the successful translation of reported transdermal drug delivery systems (TDDSs) is still limited by poor skin permeability and uncontrollable drug release. Herein, we designed and fabricated a novel ultrasound responsive TDDS by embedding DS-loaded polyester microcapsules into a hydrogel patch based on four-armed poly(ethylene glycol). The rational design endows the microcapsule-embedded hydrogel patch with good biocompatibility, excellent skin-adhesion properties and well-controlled ultrasound responsive release behavior. More importantly, by employing ultrasound as a simultaneous trigger of drug release and efficient penetration enhancer, the encapsulated drug could be released and pass through the skin barrier rapidly under ultrasound, while without the action of ultrasound, a negligible amount of drug was released and penetrated into the subcutaneous tissues in ex vivo and in vivo transdermal drug release experiments, indicating that improved and controllable transdermal delivery of DS was achieved. Our work demonstrated that the microcapsule-embedded hydrogel patch may be a promising candidate as an ultrasound responsive and enhanced TDDS of DS for treating diseases such as arthritis and topical soft tissue injuries.

Carbon nanotubes (CNTs) based advanced dermal therapeutics: current trends and future potential

The search for effective and non-invasive delivery modules to transport therapeutic molecules across skin has led to the discovery of a number of nanocarriers (viz.: liposomes, ethosomes, dendrimers, etc.) in the last few decades. However, available literature suggests that these delivery modules face several issues including poor stability, low encapsulation efficiency, and scale-up hurdles. Recently, carbon nanotubes (CNTs) emerged as a versatile tool to deliver therapeutics across skin. Superior stability, high loading capacity, well-developed synthesis protocol as well as ease of scale-up are some of the reason for growing interest in CNTs. CNTs have a unique physical architecture and a large surface area with unique surface chemistry that can be tailored for vivid biomedical applications. CNTs have been thus largely engaged in the development of transdermal systems such as tuneable hydrogels, programmable nonporous membranes, electroresponsive skin modalities, protein channel mimetic platforms, reverse iontophoresis, microneedles, and dermal buckypapers. In addition, CNTs were also employed in the development of RNA interference (RNAi) based therapeutics for correcting defective dermal genes. This review expounds the state-of-art synthesis methodologies, skin penetration mechanism, drug liberation profile, loading potential, characterization techniques, and transdermal applications along with a summary on patent/regulatory status and future scope of CNT based skin therapeutics.

Design and evaluation of chitosan/poly(l-lactide)/pectin based composite scaffolds for cartilage tissue regeneration

Poor regenerative potential of cartilage tissue due to the avascular nature and lack of supplementation of reparative cells impose an important challenge in recent medical practice towards development of artificial extracellular matrix with enhanced neo-cartilage tissue regeneration potential. Chitosan (CH), poly (l-lactide) (PLLA), and pectin (PC) compositions were tailored to generate polyelectrolyte complex based porous scaffolds using freeze drying method and crosslinked by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC), N-hydroxysuccinimide (NHS) solution containing chondroitin sulfate (CS) to mimic the composition as well as architecture of the cartilage extracellular matrix (ECM). The physical, chemical, thermal, and mechanical behaviors of developed scaffolds were done. The scaffolds were porous with homogeneous pore structure with pore size 49-170μm and porosities in the range of 79 to 84%. Fourier transform infrared study confirmed the presence of polymers (CH, PLLA and PC) within the scaffolds. The crystallinity of the scaffold was examined by the X-ray diffraction studies. Furthermore, scaffold shows suitable swelling property, moderate biodegradation and hemocompatibility in nature and possess suitable mechanical strength for cartilage tissue regeneration. MTT assay, GAG content, and attachment of chondrocyte confirmed the regenerative potential of the cell seeded scaffold. The histopathological analysis defines the suitability of scaffold for cartilage tissue regeneration.

Recent Advances in Wearable Transdermal Delivery Systems

Wearable transdermal delivery systems have recently received tremendous attention due to their noninvasive, convenient, and prolonged administration of pharmacological agents. Here, the material prospects, fabrication processes, and drug-release mechanisms of these types of therapeutic delivery systems are critically reviewed. The latest progress in the development of multifunctional wearable devices capable of closed-loop sensation and drug delivery is also discussed. This survey reveals that wearable transdermal delivery has already made an impact in diverse healthcare applications, while several grand challenges remain.

Synthesis and characterizations of alginate-α-tricalcium phosphate microparticle hybrid film with flexibility and high mechanical property as a biomaterial

A biocompatible hybrid film has been fabricated using alginate (Alg), α-tricalcium phosphate (α-TCP) microparticle and calcium chloride through ionic crosslinking as a biomaterial. The 'screeding method' (like a concrete finishing process) has been employed to develop the Alg-α-TCP film. For this method, the Alg/α-TCP blend has been prepared using an ultra-sonicator and then put on a glass slide. After that, the excess volume of blend has been cut off by skidding another slide along with the surface of the blend to achieve proper grade and flatness. The mechanical strength and flexibility of the film (Alg-α-TCP) has been controlled by changing its compositions. The crosslinking phenomenon has been confirmed by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), ¹³C nuclear magnetic resonance (NMR), x-ray diffraction and thermogravimetric analyses. The ATR-FTIR and ¹³C NMR analysis results suggest that carboxylate groups of the alginate are ionically cross-linked with Ca²⁺ ions, while the α-TCP particles reside in the network by physical interaction. The micro-fatigue test results imply high tensile strength (up to 257 MPa) and flexibility (up to 13% elongation) of the Alg-α-TCP hybrid films. The SEM analysis suggests the α-TCP particles are homogeneously distributed on the surface of Alg-α-TCP films, whereas cross-sectional images confirmed the presence of α-TCP in the cross-linked network. TGA results demonstrated that thermal stability of the hybrid film was enhanced due to ionic crosslinking and interfacial interaction between alginate and α-TCP. The incorporation of α-TCP particles diminished the swelling ratio of the hybrid film. The in vitro bone cell (MC3T3) culture and cytotoxicity tests showed that the hybrid film is biocompatible. The hybrid film releases bovine serum albumin and dimethyloxaloylglycine in a controlled way at pH 7 and 7.4, and 37 °C. Overall, the biocompatible Alg-α-TCP hybrid film with excellent mechanical strength and flexibility could be applied as an interfacial film in tissue engineering.

Xerogel modified diatomaceous earth microparticles for controlled drug release studies

An alternative facile approach for the surface modification of naturally available diatoms with xerogel for controlled drug release applications.

In Situ Silver Nanowire Deposited Cross-Linked Carboxymethyl Cellulose: A Potential Transdermal Anticancer Drug Carrier

Recently, a novel biopolymeric nanocomposite hydrogel comprised of in situ formed silver nanowires (AgNWs) deposited chemically cross-linked carboxymethyl cellulose (CMC) has been developed, which demonstrates superior efficacy as anticancer drug-curcumin carrier. The cross-linked polymer has been prepared by grafting poly [2-(methacryloyloxy) ethyl trimethylammonium chloride] on CMC using diethylene glycol dimethacrylate cross-linker. The nanocomposite hydrogel has the capability to encapsulate both hydrophobic/hydrophilic transdermal drugs. With variation in reaction conditions/parameters, several composite materials have been synthesized and depending on lower swelling/higher cross-linking and greater gel strength, an optimized grade of nanocomposite hydrogel has been selected. The developed nanocomposite hydrogel is characterized with FTIR/NMR spectra, FESEM/XRD/TGA/AFM/XPS analyses, and UV-visible spectroscopy. Rheological study has been performed to enlighten the gel strength of the composite material. The synthesized nanocomposite hydrogel is biodegradable and nontoxic to mesenchymal stem cells (hMSCs). In vitro release of curcumin suggests that in situ incorporation of AgNWs on cross-linked CMC enhanced the penetration power of nanocomposite hydrogel and released the drug in sustained way (∼62% for curcumin released in 4 days). Ex vivo rat skin permeation study confirms that the drug from both the cross-linked and nanocomposite hydrogel was permeable through the rat skin in controlled fashion. Additionally the curcumin loaded composite hydrogel can efficiently kill the MG 63 cancer cells, which has been confirmed by apoptosis study and therefore, probably be a suitable carrier for curcumin delivery toward cancer cells.

Carbon Nanomaterials in Biological Studies and Biomedicine

The "carbon nano-world" has made over the past few decades huge contributions in diverse scientific disciplines and technological advances. While dramatic advances have been widely publicized in using carbon nanomaterials such as fullerenes, carbon nanotubes, and graphene in materials sciences, nano-electronics, and photonics, their contributions to biology and biomedicine have been noteworthy as well. This Review focuses on the use of carbon nanotubes (CNTs), graphene, and carbon quantum dots [encompassing graphene quantum dots (GQDs) and carbon dots (C-dots)] in biologically oriented materials and applications. Examples of these remarkable nanomaterials in bio-sensing, cell- and tissue-imaging, regenerative medicine, and other applications are presented and discussed, emphasizing the significance of their unique properties and their future potential.

Carbon nanotubes: a novel material for multifaceted applications in human healthcare

Remarkable advances achieved in modern material technology, especially in device fabrication, have facilitated diverse materials to expand the list of their application fields.

Synthesis and investigation of a self-assembled hydrogel based on hydroxyethyl cellulose and its in vitro ibuprofen drug release characteristics

IBU is solubilized and encapsulated by β-CDP. Then C₁₂ side-chain grafting onto HEC forms inclusion complexes with the cavities of β-CDP in β-CDP/IBU through host–guest interactions to form a new self-assembled hydrogel gel-(β)CDP-HEC/IBU.

Stimuli-responsive, biocompatible hydrogel derived from glycogen and poly(N-isopropylacrylamide) for colon targeted delivery of ornidazole and 5-amino salicylic acid

A novel stimuli-responsive hydrogel (cl-Gly/pNIPAm) has been fabricated using biopolymer glycogen and N-isopropylacrylamide.

Synthesis of polydopamine-coated halloysite nanotube-based hydrogel for controlled release of a calcium channel blocker

A stimuli-triggered drug delivery vehicle has been synthesized by self-polymerization of dopamine (DA) on the outer surface of halloysite nanotubes (HNT) followed by gelationviaalginate.