Biogenic Silver Nanoparticles/Mg-Al Layered Double Hydroxides with Peroxidase-like Activity for Mercury Detection and Antibacterial Activity

Over the past decade, the attention of researchers has been drawn to materials with enzyme-like properties to substitute natural enzymes. The ability of nanomaterials to mimic enzymes makes them excellent enzyme mimics; nevertheless, there is a wide berth for improving their activity and providing a platform to heighten their potential. Herein, we report a green and facile route for Tectona grandis leaves extract-assisted synthesis of silver nanoparticles (Ag NPs) decorated on Mg-Al layered double hydroxides (Mg-Al-OH@TGLE-AgNPs) as a nanocatalyst. The Mg-Al-OH@TGLE-AgNPs nanocatalyst was well characterized, and the average crystallite size of the Ag NPs was found to be 7.92 nm. The peroxidase-like activity in the oxidation of o-phenylenediamine in the presence of H2O2 was found to be an intrinsic property of the Mg-Al-OH@TGLE-AgNPs nanocatalyst. In addition, the use of the Mg-Al-OH@TGLE-AgNPs nanocatalyst was extended towards the quantification of Hg2+ ions which showed a wide linearity in the concentration range of 80-400 μM with a limit of detection of 0.2 nM. Additionally, the synergistic medicinal property of Ag NPs and the phytochemicals present in the Tectona grandis leaves extract demonstrated notable antibacterial activity for the Mg-Al-OH@TGLE-AgNPs nanocatalyst against Gram-negative Escherichia coli and Gram-positive Bacillus cereus.

Fe-Ti bimetal oxide adsorbent for removing low concentration H2S at room temperature

ABSTRACTHerein, a series of Fe-Ti bimetal oxide adsorbents were prepared by reduction-co-precipitation method, and their performance in removing low concentration H₂S at room temperature was investigated. The adsorbents were characterized by X-Ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), Ultraviolet Visible diffuse reflectance spectroscopy (UV-Vis-DRS), X-Ray photoelectron spectroscopy (XPS) and N₂ adsorption-desorption. The results showed that the addition of Ti increased the specific surface area, pore volume and small oligomeric Fe₂O₃ of ferrihydrite. When the Fe/Ti molar ratio was 8:1, Fe-Ti bimetal oxide formed a large amount of oligomeric Fe₂O₃, and its specific surface area and pore volume reached 344.99 m²/g and 0.34 cm³/g, respectively. At this time, Fe-Ti bimetal oxide exhibited the highest breakthrough sulfur capacity of 222.8 mg/g. High temperature calcination caused Fe-Ti bimetal oxide to form small specific surface area and pore volume, and produced crystalline α-Fe₂O₃. And the breakthrough sulfur capacity of Fe-Ti bimetal oxide decreased with the increasing calcination temperature. In addition, the desulfurization process conformed to the unreacted shrinking nucleus model.

Enhanced Peroxidase-mimicking Activity of Plasmonic Gold-modified Mn3 O4 Nanocomposites through Photoexcited Hot Electron Transfer

Enzyme-mimicking artificial nanomaterials often termed nanozymes have broad applications in many fields, including biosensing, pollutant degradation and cancer diagnosis. Herein, we introduce a plasmonic gold nanoparticle-modified Mn₃ O₄ nanozyme (Mn₃ O₄ -Au). Visible or near infrared light excitation into the plasmonic absorption band of the surface-bound gold nanoparticles enhances the catalytic oxidation of tetramethylbenzidine (TMB). The mechanism of light-enhanced peroxidase activity is proposed based on the Mn₃ O₄ conduction band mediated hot electron transfer from photoexcited gold nanoparticles to H₂ O₂ which undergoes further oxygen-oxygen bond cleavage to yield hydroxyl radical. The surface decoration of plasmonic gold nanoparticles endows Mn₃ O₄ -Au to be a light-regulated nanozyme.

Enzyme mimics in-focus: Redefining the catalytic attributes of artificial enzymes for renewable energy production

Herein, the advantages of enzyme mimetics by redefining the catalytic attributes and implementing artificial enzymes (AEs) for energy-related applications have presented. The intrinsic enzyme-like catalytic characteristics of nanozymes have become a growing area of prime interest in bio-catalysis. The development of AEs has redefined the concept of catalytic activity, opening a wide range of possibilities in biotechnological and energy sectors. Nowadays, power-energy is one of the most valuable resources that enable the development and progress of humanity. Over the last 50 years, fossil fuels' burning has released greenhouse gases and negatively impacted the environment and health. In 2019, around 84% of global primary energy came from coal, oil, and gas. Therefore, a global energy transition to renewable and sustainable energy is urgently needed to generate clean energy as biofuels and biohydrogen. However, to achieve this, the implementation of natural enzymes brings more significant challenges because their practical application is limited by the low operational stability, harsh environmental conditions, and expensive preparation processes. Hence, to accelerate the transition, promising substitutes are AEs, well-defined structures made of organic or inorganic materials that can mimic the catalytic power of natural enzymes. Despite being still in the midst, enzyme mimics overcome the main obstacles for a conventional enzyme. It opens future opportunities to optimize the production of renewable energies with excellent performance, high efficiency, and increasingly competitive prices. Thus, this work is a comprehensive study covering the promising potential of AEs, as biocatalysts, specifically for renewable energy production.

Magnetic nanomaterials with unique nanozymes-like characteristics for colorimetric sensors: A review

Colorimetric sensors for the rapid detection of numerous analytes have been widely applied in many fields such as biomedicine, food industry and environmental science due to their highly sensitive and selective response, easy operation and visual identification by naked eyes. In this review, the recent progress of the colorimetric sensors based on the magnetic nanomaterials with unique nanozymes-like catalytic activity (magnetic nanozyme) and their colorimetric sensing applications are presented. Emerging magnetic nanozyme-based colorimetric sensors, such as metal oxide/sulfides-based, metal-based, carbon-based, and aptamer-conjugated magnetic nanomaterials, offer many desirable features for target analytes detection. And due to the unique nanoscale physical-chemical properties, magnetic nanozymes have been used to mimic the catalytic activity of natural enzymes such as peroxidases, oxidases and catalases. This review also highlights the catalytic mechanisms of enzyme-like reactions, and promising colorimetric sensing system for the detection of chemical compounds like H₂O₂, pesticide, ascorbic acid, dopamine, tetracyclines, perfluorooctane sulfonate, phenolic compounds, heavy metal ion and sulfite have been deeply discussed. In addition, the remaining challenges and future directions in utilizing magnetic nanozyme for colorimetric sensors are addressed.

Recent advances in nanomaterials for colorimetric cancer detection

The early diagnosis of cancer can significantly improve patient survival rates. Colorimetric methods for real-time naked-eye detection have aroused growing interest owing to their low cost, simplicity, and practicability. With the rapid development of nanotechnology, compared with conventional diagnostic methods, nanomaterials with unique physical and chemical properties were applied to improve selectivity and sensitivity in colorimetric detection of cancer biomarkers, such as MUC1 aptamer conjugated PtAuNPs to specifically recognize MUC1 proteins on the cancer cell surfaces, etching of silver nanoprisms to detect prostate-specific antigen, and aggregation or dispersion of AuNPs to sense prostate cancer antigen gene 3 or glutathione, by which the limit of detection (LOD) could approach values down to a few cancer cells per mL, several fg per mL proteins, several ng of nucleic acids, or even tens of nM of organic molecules. Herein, we review the recent progress achieved in developing colorimetric nanosensors for cancer diagnosis, particularly providing an overview of the sensing principles, target biomarkers, advanced nanomaterials employed in the fabrication of sensing platforms, and strategies for improving signal sensitivity and specificity. Finally, we sum up the nanomaterial-based colorimetric cancer detection as well as existing challenges that should be resolved to extend their clinical application.

Silver-Decorated Cobalt Ferrite Nanoparticles Anchored onto the Graphene Sheets as Electrode Materials for Electrochemical and Photocatalytic Applications

The present work describes the synthesis of Ag-CoFe₂O₄/rGO nanocomposite as a photocatalyst through the hydrothermal process by the attachment of silver and cobalt ferrite (CoFe₂O₄) nanoparticles on the surface of reduced graphene oxide. The effect of Ag and reduced graphene oxide (rGO) on the structure, optical, magnetic, photocatalytic, and electrochemical performance of the CoFe₂O₄ is systematically explored through various analytical techniques. The analyses of the observed outcomes reveal that the graphene sheets are exfoliated and decorated with well-dispersed Ag and CoFe₂O₄ nanoparticles. UV-vis spectra indicate a gradual shift in the absorption edge toward the higher wavelength with the addition of Ag ions, which signifies variation in the energy gap of the samples. Photoluminescence results divulge that graphene can decline the electron-hole recombination rate and improve the photocatalytic activity of the Ag-CoFe₂O₄/rGO nanocomposite. In this context, the Ag-CoFe₂O₄/rGO sample presents good catalytic activity as compared to the CoFe₂O₄ and Ag-CoFe₂O₄ photocatalysts for the degradation of methylene blue (MB) dye and suggests that the rGO plays a vital role in the Ag-CoFe₂O₄/rGO nanocomposite. The deterioration rate of the samples is found to be in the order of CoFe₂O₄(78.03%) < Ag-CoFe₂O₄(83.04%) < Ag-CoFe₂O₄/rGO(93.25%) in 100 min for MB dye, respectively, under visible-light irradiation. The room-temperature ferromagnetic behavior of the samples is confirmed by the M-H hysteresis loop measurements. Overall, the Ag-CoFe₂O₄/rGO nanocomposite promises to be a strong magnetic photocatalyst for contaminated wastewater treatment. The electrochemical performance of all of the samples was examined by the cyclic voltammetry (CV) that exhibits a superior rate performance and cycle stability of the Ag-CoFe₂O₄/rGO nanocomposite as compared to the other samples.

Enzyme Mimetic Activity of ZnO-Pd Nanosheets Synthesized via a Green Route

Recent developments in the area of nanotechnology have focused on the development of nanomaterials with catalytic activities. The enzyme mimics, nanozymes, work efficiently in extreme pH and temperature conditions, and exhibit resistance to protease digestion, in contrast to enzymes. We developed an environment-friendly, cost-effective, and facile biological method for the synthesis of ZnO-Pd nanosheets. This is the first biosynthesis of ZnO-Pd nanosheets. The synthesized nanosheets were characterized by UV-visible spectroscopy, X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray. The d-spacing (inter-atomic spacing) of the palladium nanoparticles in the ZnO sheets was found to be 0.22 nm, which corresponds to the (111) plane. The XRD pattern revealed that the 2θ values of 21.8°, 33.3°, 47.7°, and 56.2° corresponded with the crystal planes of (100), (002), (112), and (201), respectively. The nanosheets were validated to possess peroxidase mimetic activity, which oxidized the 3,3',5,5'-tetramethylbenzidine (TMB) substrate in the presence of H2O2. After 20 min of incubation time, the colorless TMB substrate oxidized into a dark-blue-colored one and a strong peak was observed at 650 nm. The initial velocities of Pd-ZnO-catalyzed TMB oxidation by H2O2 were analyzed by Michaelis-Menten and Lineweaver-Burk plots, resulting in 64 × 10-6 M, 8.72 × 10-9 Msec-1, and 8.72 × 10-4 sec-1 of KM, Vmax, and kcat, respectively.

Intracellular Antioxidant Activity of Biocompatible Citrate-Capped Palladium Nanozymes

A method for the aqueous synthesis of stable and biocompatible citrate-coated palladium nanoparticles (PdNPs) in the size range comparable to natural enzymes (4–8 nm) has been developed. The toxicological profile of PdNPs was assessed by different assays on several cell lines demonstrating their safety in vitro also at high particle concentrations. To elucidate their cellular fate upon uptake, the localization of PdNPs was analyzed by Transmission Electron Microscopy (TEM). Moreover, crucial information about their intracellular stability and oxidation state was obtained by Sputtering-Enabled Intracellular X-ray Photoelectron Spectroscopy (SEI-XPS). TEM/XPS results showed significant stability of PdNPs in the cellular environment, an important feature for their biocompatibility and potential for biomedical applications. On the catalytic side, these PdNPs exhibited strong and broad antioxidant activities, being able to mimic the three main antioxidant cellular enzymes, i.e., peroxidase, catalase, and superoxide dismutase. Remarkably, using an experimental model of a human oxidative stress-related disease, we demonstrated the effectiveness of PdNPs as antioxidant nanozymes within the cellular environment, showing that they are able to completely re-establish the physiological Reactive Oxygen Species (ROS) levels in highly compromised intracellular redox conditions.

Spinel ferrite (AFe2O4)-based heterostructured designs for lithium-ion battery, environmental monitoring, and biomedical applications

The development of spinel ferrite nanomaterial (SFN)-based hybrid architectures has become more popular owing to the fascinating physicochemical properties of SFNs, such as their good electro-optical and catalytic properties, high chemothermal stability, ease of functionalization, and superparamagnetic behaviour. Furthermore, achieving the perfect combination of SFNs and different nanomaterials has promised to open up many unique synergistic effects and advantages. Inspired by the above-mentioned noteworthy properties, numerous and varied applications have been recently developed, such as energy storage in lithium-ion batteries, environmental pollutant monitoring, and, especially, biomedical applications. In this review, recent development efforts relating to SFN-based hybrid designs are described in detail and logically, classified according to 4 major hybrid structures: SFNs/carbonaceous nanomaterials; SFNs/metal–metal oxides; SFNs/MS₂; and SFNs/other materials. The underlying advantages of the additional interactions and combinations of effects, compared to the standalone components, and the potential uses have been analyzed and assessed for each hybrid structure in relation to lithium-ion battery, environmental, and biomedical applications.

We have summarized recent developments in SFN-based hybrid designs. The additional interactions, combination effects, and important changes have been analyzed and assessed for LIB, environmental monitoring, and biomedical applications.

Enzyme mimetic activities of spinel substituted nanoferrites (MFe2O4): A review of synthesis, mechanism and potential applications

Recently, the intrinsic enzyme-like activities of some nanoscale materials known as "nanozymes" have become a growing area of interest. Nanosized spinel substituted ferrites (SFs) with general formula of MFe₂O₄, where M represents a transition metal, are among a group of magnetic nanomaterials attracting researchers' enormous attention because of their excellent catalytic performance, biomedical applications and capability for environmental remediation. Due to their unique nanoscale physical-chemical properties, they have been used to mimic the catalytic activity of natural enzymes such as peroxidases, oxidases and catalases. In addition, various nanocomposite materials based on SFs have been introduced as novel artificial enzymes. This review mainly highlights the synthetic approaches for newly developed SF-nanozymes and also the structural/experimental factors that are effective on the kinetics and catalytic mechanisms of enzyme-like reactions. SF-nanozymes have been found potentially capable of being applied in various fields such as enzyme-free immunoassays and biosensors for colorimetric detection of biological molecules. Therefore, the application of SF nanoparticles, as efficient enzyme mimetics have been detailed discussed.

Magnetic-Plasmonic Heterodimer Nanoparticles: Designing Contemporarily Features for Emerging Biomedical Diagnosis and Treatments

Magnetic-plasmonic heterodimer nanostructures synergistically present excellent magnetic and plasmonic characteristics in a unique platform as a multipurpose medium for recently invented biomedical applications, such as magnetic hyperthermia, photothermal therapy, drug delivery, bioimaging, and biosensing. In this review, we briefly outline the less-known aspects of heterodimers, including electronic composition, interfacial morphology, critical properties, and present concrete examples of recent progress in synthesis and applications. With a focus on emerging features and performance of heterodimers in biomedical applications, this review provides a comprehensive perspective of novel achievements and suggests a fruitful framework for future research.

An efficient thin-walled Pd/polypyrrole hybrid nanotube biocatalyst for sensitive detection of ascorbic acid

Controllable fabrication of novel and uniform noble metal nanoparticles on a specific support with a superior catalytic or electrocatalytic performance is of significantly importance for practical applications. In this report, we demonstrated an effective way to fabricate uniform thin-walled Pd/polypyrrole (PPy) hollow nanotubes. The prepared Pd/PPy hybrid nanotubes exhibited an excellent peroxidase-like activity to oxidize a typical peroxidase substrate such as 3,3',5,5'-tetramethylbenzidine in comparison with traditional Pd/C and Pd black catalysts. The outstanding catalytic activity of the Pd/PPy hybrid nanotubes for peroxidase mimicking could be resulting from their unique hollow characteristic and an interfacial effect between PPy and Pd components. Based on the favorable catalytic property of the Pd/PPy hybrid nanotubes, a convenient and rapid colorimetric way to sensitively determine ascorbic acid has been presented. The detection limit was around 0.062 μM and an excellent selectivity was also achieved. The developed detection system in this study could be extended to the fields of bioscience and biotechnology with promising prospects.

The promoted catalytic hydrogenation performance of bimetallic Ni–Co–B noncrystalline alloy nanotubes

A noncrystalline Ni–B alloy in the shape of nanotubes has demonstrated its superior catalytic performance for some hydrogenation reactions. Remarkable synergistic effects have been observed in many reactions when bimetallic catalysts were used; however, bimetallic noncrystalline alloy nanotubes are far less investigated. Here, we report a simple acetone-assisted lamellar liquid crystal approach for synthesizing a series of bimetallic Ni–Co–B nanotubes and investigate their catalytic performances. The dilution effect of acetone on liquid crystals was characterized by small-angle X-ray diffraction (SAXRD) and scanning electron microscopy (SEM). The Ni/Co molar ratio of the catalyst was varied to study the composition, porous structure, electronic interaction, and catalytic efficiency. In the liquid-phase hydrogenation of p-chloronitrobenzene, the as-prepared noncrystalline alloy Ni–Co–B nanotubes exhibited higher catalytic activity and increased stability as compared to Ni–B and Co–B alloy nanotubes due to electronic interactions between the nickel and cobalt. The excellent hydrogenation performance of the Ni–Co–B nanotubes was attributed to their high specific surface area and the characteristic confinement effects, compared with Ni–Co–B nanoparticles.

Ni–Co–B noncrystalline alloy nanotubes exhibited higher catalytic activity and better stability due to the synergistic interactions between nickel and cobalt.

Nanomaterials with enzyme-like characteristics (nanozymes): next-generation artificial enzymes (II)

An updated comprehensive review to help researchers understand nanozymes better and in turn to advance the field.

Functional nanomaterials with unique enzyme-like characteristics for sensing applications

We highlight the recent developments in functional nanomaterials with unique enzyme-like characteristics for sensing applications.

In Situ Vapor Polymerization of Poly(3,4-ethylenedioxythiophene) Coated SnO₂-Fe₂O₃ Continuous Electrospun Nanotubes for Rapid Detection of Iodide Ions

In this work poly(3,4-ethylenedioxythiophene) (PEDOT) coated SnO₂-Fe₂O₃ continuous nanotubes with a uniform core–shell structure have been demonstrated for rapid sensitive detection of iodide ions. The SnO₂-Fe₂O₃ nanotubes were firstly fabricated via an electrospinning technique and following calcination process. An in situ polymerization approach was then performed to coat a uniform PEDOT shell on the surface of as-prepared SnO₂-Fe₂O₃ nanotubes by vapor phase polymerization, using Fe₂O₃ on the surface of nanotubes as an oxidant in an acidic condition. The resultant PEDOT@SnO₂-Fe₂O₃ core-shell nanotubes exhibit a fast response time (~4 s) toward iodide ion detection and a linear current response ranging from 10 to 100 μM, with a detection limit of 1.5 μM and sensitivity of 70 μA/mM/cm². The facile fabrication process and high sensing performance of this study can promote a wide range of potential applications in human health monitoring and biosensing systems.

MOF-derived porous Fe2O3 with controllable shapes and improved catalytic activities in H2S selective oxidation

Porous Fe₂O₃ architectures with controllable shapes are synthesized by the MOF-template method and show excellent catalytic activity for H₂S selective oxidation.

Strongly coupled CeO2/Co3O4/poly(3,4-ethylenedioxythiophene) nanofibers with enhanced nanozyme activity for highly sensitive colorimetric detection

In this work, we have prepared CeO₂/Co₃O₄ composite nanofibers via an electrospinning technique followed by a calcination process. Then core-shell structured CeO₂/Co₃O₄/poly(3,4-ethylenedioxythiophene) (PEDOT) composite nanofibers were fabricated through a redox reaction between the 3,4-ethylenedioxythiophene (EDOT) monomer and Co₃O₄ on the surface of CeO₂/Co₃O₄ composite nanofibers. The morphology and composition of the two composite nanofibers were confirmed by field-emission scanning electron microscopy, transmission electron microscopy, x-ray diffraction, Fourier transform infrared spectroscopy, and x-ray photoelectron spectra measurements. Due to the synergistic effect between CeO₂ and Co₃O₄, the catalytic activity was enhanced compared to that of independent oxide nanofibers. After the growth of PEDOT, the catalytic activity process was further improved, having achieved a secondary synergistic effect. Application of the two prepared composite nanofibers as peroxidase-like catalysts for the colorimetric detection of H₂O₂ was investigated. It is anticipated that this work can inspire researchers to develop various novel functional nanocomposites for applications in biosensing and environmental monitoring.

Fabrication of oxidase-like hollow MnCo2O4 nanofibers and their sensitive colorimetric detection of sulfite and l-cysteine

Hollow MnCo₂O₄ nanofibers as efficient oxidase mimics for sensitive detection of sulfite and l-cysteine have been developed.

Electrospun magnetic CoFe2O4/Ag hybrid nanotubes for sensitive SERS detection and monitoring of the catalytic degradation of organic pollutants

We report on the synthesis of magnetic CoFe₂O₄/Ag hybrid nanotubes as both SERS substrate and catalyst to monitor the catalytic degradation process of organic pollutants.

Design, synthesis and properties of a reactive chromophoric/fluorometric probe for hydrogen peroxide detection

A succinct chromophoric/fluorometric probe, AVPM, for sensitive and selective H₂O₂detection.

Bi-functional reduced graphene oxide/AgCo composite nanosheets: an efficient catalyst and SERS substrate for monitoring the catalytic reactions

We describe the fabrication of bifunctional rGO/AgCo composite nanosheets as SERS substrates to monitor catalytic and photocatalytic reaction.

Sulfur-doped CoFe2O4 nanopowders for enhanced visible-light photocatalytic activity and magnetic properties

Magnetic recovery S-CoFe₂O₄ nanopowders showed excellent visible photocatalytic degradation of oxytetracycline and recycling performances in aqueous solution.