Synthesis of lignin-based carbon/graphene oxide foam and its application as sensors for ammonia gas detection

The present study highlights the integration of lignin with graphene oxide (GO) and its reduced form (rGO) as a significant advancement within the bio-based products industry. Lignin-phenol-formaldehyde (LPF) resin is used as a carbon source in polyurethane foams, with the addition of 1 %, 2 %, and 4 % of GO and rGO to produce carbon structures thus producing carbon foams (CFs). Two conversion routes are assessed: (i) direct addition with rGO solution, and (ii) GO reduction by heat treatment. Carbon foams are characterized by thermal, structural, and morphological analysis, alongside an assessment of their electrochemical behavior. The thermal decomposition of samples with GO is like those having rGO, indicating the effective removal of oxygen groups in GO by carbonization. The addition of GO and rGO significantly improved the electrochemical properties of CF, with the GO2% sensors displaying 39 % and 62 % larger electroactive area than control and rGO2% sensors, respectively. Furthermore, there is a significant electron transfer improvement in GO sensors, demonstrating a promising potential for ammonia detection. Detailed structural and performance analysis highlights the significant enhancement in electrochemical properties, paving the way for the development of advanced sensors for gas detection, particularly ammonia, with the prospective market demands for durable, simple, cost-effective, and efficient devices.

Carbon nanotube incorporated eucalyptus derived activated carbon-based novel adsorbent for efficient removal of methylene blue and eosin yellow dyes

Carbon nanotube (CNT) incorporated eucalyptus derived activated carbon-based novel adsorbent is synthesized by a novel route. This adsorbent is investigated for the removal of two different dyes; methylene blue (MB) and eosin yellow (EY) from the waste water. The effect of pH, adsorbent dose, contact time and initial concentration, has been used to measure the dye removal efficiency of the adsorbent. Langmuir isotherm, Freundlich isotherm and D-R isotherm models were used to fit the experimental dye adsorption data, with the D-R model providing the best fit. The maximum adsorption efficiency of adsorbent for MB and EY removal is 49.61 and 49.15 mg/g, respectively. Reaction kinetics studies were also established to further investigate the dye adsorption mechanism. It is observed that pseudo second order model define the reaction kinetics involved in the reaction. This activated carbon adsorbent based on CNTs is shown to be highly promising for water decontamination applications.

Cobalt ferrite nanoparticle-loaded nitrogen-doped carbon sponge as a magnetic 3D heterogeneous catalyst for monopersulfate-based oxidation of salicylic acid

As salicylic acid (SAL) is increasingly consumed as a pharmaceutical product, release of SAL into the environment poses threats to ecology because of its low bio-degradability. Thus, SO₄^•--based chemical oxidation processes have been proposed for degrading SAL. Since monopersulfate (MPS) represents a primary reagent for generating SO₄^•-, and Co is the most capable metal for activating MPS to generate SO₄^•-, C₃O₄ NPs are frequently proposed for activating MPS but they are difficult to recover from water. Thus CoFe₂O₄ is considered as a magnetic alternative to Co₃O₄, and loading of CoFe₂O₄ NPs on substrates could further improve dispersion and avoid aggregation of NPs. Therefore, this study proposes a 3-Dimensional (3D) hierarchical catalyst which is fabricated by loading CoFe₂O₄ NPs on nitrogen-doped carbon sponge (NCS). The NCS is not only adopted as a support for CoFe₂O₄ NPs but also provides additional catalytic sites and enhances catalytic activities of CoFe₂O₄ NPs for MPS activation. As a result, CoFe₂O₄ NPs loaded on NCS (CFNCS) exhibits substantially higher catalytic activities than CoFe₂O₄ NPs and NCS individually with 100% of SAL could be afforded within 30 min. E_a of SAL degradation of 47.4 kJ/mol by CFNCS-activated MPS is also lower than those by other reported catalysts, whereas the RSE was 11.1%, which was also much higher than most of reported values. These features demonstrate that CFNCS is a promising 3D catalyst for enhancing MPS activation to degrade SAL. The findings obtained here are also insightful to develop efficient MPS-activating catalysts for eliminating contaminants.

Co3O4 nanocube-decorated nitrogen-doped carbon foam as an enhanced 3-dimensional hierarchical catalyst for activating Oxone to degrade sulfosalicylic acid

As sulfosalicylic acid (SUA) is extensively used as a pharmaceutical product, discharge of SUA into the environment becomes an emerging environmental issue because of its low bio-degradability. Thus, SO₄^--based advanced oxidation processes have been proposed for degrading SUA because of many advantages of SO₄^-. As Oxone represents a dominant reagent for producing SO₄^-, and Co is the most capable metal for activating Oxone to generate SO₄^-, it is critical to develop an effective but easy-to-use Co-based catalysts for Oxone activation to degrade SUA. Herein, a 3D hierarchical catalyst is specially created by decorating Co₃O₄ nanocubes (NCs) on macroscale nitrogen-doped carbon form (NCF). This Co₃O₄-decorated NCF (CONCF) is free-standing, macroscale and even squeezable to exhibit interesting and versatile features. More importantly, CONCF consists of Co₃O₄ NCs evenly distributed on NCF without aggregation. The NCF not only serves as a support for Co₃O₄ NCs but also offers additional active sites to synergistically enhance catalytic activities towards Oxone activation. Therefore, CONCF exhibits a higher catalytic activity than the conventional Co₃O₄ nanoparticles for activating Oxone to fully eliminate SUA in 30 min with a rate constant of 0.142 min^-1. CONCF exhibits a much lower Ea value of SUA degradation (35.2 kJ/mol) than reported values, and stable catalytic activities over multi-cyclic degradation of SUA. The mechanism of SUA degradation is also explored, and degradation intermediates of SUA degradation are identified to provide a possible pathway of SUA degradation. These features validate that CONCF is certainly a promising 3D hierarchical catalyst for enhanced Oxone activation to degrade SUA. The findings obtained here are also insightful to develop efficient heterogeneous Oxone-activating catalysts for eliminating emerging contaminants.

As(V) sorption from aqueous solutions using quaternized algal/polyethyleneimine composite beads

Composite beads (APEI*), obtained by the controlled interaction of algal biomass with PEI, followed by ionotropic gelation and crosslinking processes using CaCl₂/glutaraldehyde solution, constitute efficient supports for metal binding. The quaternization of algal/PEI beads (Q-APEI*) significantly increases the sorption properties of the composite beads (APEI*) for As(V). The materials are characterized by SEM/EDX, TGA, BET, elemental analysis, FTIR, XPS, and titration. The sorption of As(V) is studied in function of pH while sorption mechanism is discussed in function of metal speciation and surface characteristics of the sorbent. Optimum sorption occurs at pH close to 7. Fast uptake kinetics, correlated to textural properties are successfully fitted by pseudo-first order rate equation and the Crank equation (for resistance to intraparticle diffusion); equilibrium is reached with 45-60 min. The Langmuir equation finely fits sorption isotherms; maximum sorption capacity reaches 1.34 mmol As g^-1. Arsenic can be completely eluted using 0.5 M CaCl₂/0.5 M HCl solutions; the sorbent maintains high sorption and desorption efficiencies for a minimum of 5 cycles. The sorbent is tested for the removal of As(V) from mining effluents containing high concentration of iron and traces of zinc. At pH 3, the sorbent shows remarkable selectivity for As(V) over Fe. After controlling the initial pH to 5, a sorbent dosage of 2 g L^-1 is sufficient for achieving the complete recovery of As(V) from mining effluent (corresponding to initial concentration of 1.295 mmol As L^-1).

Structured carbon foam derived from waste biomass: application to endocrine disruptor adsorption

In this paper, a novel structured carbon foam has been prepared from argan nut shell (ANS) was developed and applied in bisphenol A (BPA) removal from water. The results showed that the prepared carbon foam remove 93% of BPA (60 mg/L). The BPA equilibrium data obeyed the Liu isotherm, displaying a maximum uptake capacity of 323.0 mg/g at 20 °C. The calculated free enthalpy change (∆H° = - 4.8 kJ/mol) indicated the existence of physical adsorption between BPA and carbon foam. Avrami kinetic model was able to explain the experimental results. From the regeneration tests, we conclude that the prepared carbon foam has a good potential to be used as an economic and efficient adsorbent for BPA removal from contaminated water. Based on these results and the fact that the developed structured carbon foam is very easy to separate from treated water, it can serve as an interesting material for real water treatment applications.

The removal of pentavalent arsenic by graphite intercalation compound functionalized carbon foam from contaminated water

In the present investigation, Graphite intercalation compound (GIC) functionalized phenolic resin based carbon foam for removal of arsenic (As(V)) from contaminated water is developed by sacrificial template technique followed by carbonization at 1000 °C in N₂. The GICCF adsorbent is characterised by scanning electron microscope (SEM) for morphological study, X-ray diffraction (XRD) patterns explains the phase information and interlayer spacing of the adsorbent, whereas Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Photoelectron Spectroscopy (XPS) gives the information about surface functionality and mechanism of adsorption of As(V) over the surface of adsorbent. The time data is fitted well in pseudo second order kinetics and follows multilinear nature of intra-particle diffusion model. The adsorption nature of adsorbent and adsorbate is explained by Langmuir isotherm better than Freundlich isotherm, Temkin isotherm, and D-R isotherm. The adsorption capacity of adsorbent is 62.5 μgg^-1, which is calculated by Langmuir isotherm. Arsenic removal by GICCF is taken place within two hrs up to acceptable limit. The proposed GICCF can be regenerated after treating with 0.1 M HNO₃ and 0.1 M HCl solution and it can be used for multiple times.

Successive extraction of As(V), Cu(II) and P(V) ions from water using spent coffee powder as renewable bioadsorbents

For the first time, renewable and easy accessible pre-bleached spent coffee powder coated with polyethylenimine (PEI) and ferric ions (Coffee-PEI-Fe) was used for the successive adsorption of As(V), Cu(II) and P(V) ions from spiked water samples. Fully characterized coffee-PEI-Fe was employed for batch mode experiments. Kinetic regression analysis showed that the adsorption processes of As(V) and P(V) anions follows a pseudo-second-order model, while the adsorption of Cu(II) ions fit with a pseudo-first-order model. The maximum adsorption capacities estimated by Langmuir model for As(V), Cu(II) and P(V) ions were 83.3, 200.1, and 50.2 mg/g, respectively. The simulated results revealed that the internal diffusion is the rate-determining step for the adsorptions of As(V) and Cu(II) ions, while film diffusion is the mass transfer resistance for the adsorption of P(V) ions on the surface of coffee-PEI-Fe. The successive adsorptions of adsorbates were achieved through electrostatic attraction between adsorbent surface and adsorbates. The dynamic column adsorption behavior of the adsorbent was described by Thomas model, which showed a good agreement with the experimental values (q_exp). The results presented in this paper could be used for developing efficient adsorbent from renewable materials for water purification.

Modeling of adsorption behavior of the amine-rich GOPEI aerogel for the removal of As(iii) and As(v) from aqueous media

In the present study, a PEI cross-linked graphene oxide aerogel (GOPEI) was prepared.

Automated solid-phase extraction of organic pollutants using melamine–formaldehyde polymer-derived carbon foams

Solid-phase extraction of environmental pollutants is accomplished using carbon foams derived from melamine–formaldehyde polymer foams.