Copper oxides supported sulfur-doped porous carbon material as a remarkable catalyst for reduction of aromatic nitro compounds

Synthesis and manufacturing of metal-organic framework derived carbon/metal oxide nanomaterials with an advisable porous structure and composition are essential as catalysts in various organic transformation processes for the preparation of environmentally friendly catalysts. In this work, we report a scalable synthesis of sulfur-doped porous carbon-containing copper oxide nanoparticles (marked CuxO@CS-400) via direct pyrolysis of a mixture of metal-organic framework precursor called HKUST-1 and diphenyl disulfide for aromatic nitro compounds reduction. X-ray diffraction, surface area analysis (BET), X-ray energy diffraction (EDX) spectroscopy, thermal gravimetric analysis, elemental mapping, infrared spectroscopy (FT-IR), transmission electron microscope, and scanning electron microscope (FE-SEM) analysis were accomplished to acknowledge and investigate the effect of S and CuxO as active sites in heterogeneous catalyst to perform the reduction-nitro aromatic compounds reaction in the presence of CuxO@CS-400 as an effective heterogeneous catalyst. The studies showed that doping sulfur in the resulting carbon/metal oxide substrate increased the catalytic activity compared to the material without sulfur doping.

Reactivity of metal-oxo clusters towards biomolecules: from discrete polyoxometalates to metal-organic frameworks

Metal-oxo clusters hold great potential in several fields such as catalysis, materials science, energy storage, medicine, and biotechnology. These nanoclusters of transition metals with oxygen-based ligands have also shown promising reactivity towards several classes of biomolecules, including proteins, nucleic acids, nucleotides, sugars, and lipids. This reactivity can be leveraged to address some of the most pressing challenges we face today, from fighting various diseases, such as cancer and viral infections, to the development of sustainable and environmentally friendly energy sources. For instance, metal-oxo clusters and related materials have been shown to be effective catalysts for biomass conversion into renewable fuels and platform chemicals. Furthermore, their reactivity towards biomolecules has also attracted interest in the development of inorganic drugs and bioanalytical tools. Additionally, the structural versatility of metal-oxo clusters allows for the efficiency and selectivity of the biomolecular reactions they promote to be readily tuned, thereby providing a pathway towards reaction optimization. The properties of the catalyst can also be improved through incorporation into solid supports or by linking metal-oxo clusters together to form Metal-Organic Frameworks (MOFs), which have been demonstrated to be powerful heterogeneous catalysts. Therefore, this review aims to provide a comprehensive and critical analysis of the state of the art on biomolecular transformations promoted by metal-oxo clusters and their applications, with a particular focus on structure-activity relationships.

Selective adsorption mechanisms of iodinated trihalomethanes onto thiol-functionalized HKUST-1s in a mixed solute

The selective adsorption mechanisms involved in the competitive adsorption of five iodinated trihalomethanes (I-THMs) onto dithiolglycol and (3-mercaptopropyl)-trimethoxy functionalized HKUST-1 (HK-SH and HK-MPTS, respectively) were investigated by single- and mixed-batch adsorption. HK-SH had the highest adsorption rates and capacities for the five I-THMs, followed by HK-MPTS and pristine HKUST-1, even though the porosity and surface area decreased after modification. The primary adsorptive mechanism of HK-SH consists of ion-dipole interactions of I-THMs with the protonated hydroxyl and thiol groups at the metal (Cu) node, which is supported by Lewis acid-base reactions via Cu-Cu complex and π-π interactions. In a mixed solute, bromodiiodomethane, which was the most hydrophobic and had the smallest molecular size, exhibited the most competitive adsorption on HK-SH. In contrast, the selective adsorption of I-THMs onto HK-MPTS was affected by their log K_ow values, causing hydrophobic partitioning onto the alkyl chain of the mercaptopropyl group. Iodinated haloforms tend to achieve a higher adsorption rate and capacity than chlorinated and brominated haloforms via hydrophobic partitioning. Moreover, dithiolglycol grafted onto HK-SH can better promote the excellent selective adsorption performance of iodoacetamide than dichloroiodomethane and iodoacetic acid in both single- and mixed-solute solutions due to hydrogen bonding via the -NH₂ group of diiodoacetamide.

Rational strategies for proton-conductive metal-organic frameworks

Since the transition of energy platforms, proton-conducting materials have played a significant role in broad applications for electrochemical devices. In particular, solid-state proton conductors (SSPCs) are emerging as the electrolyte in fuel cells (FC), a promising power generation technology, because of their high performance and safety for operating in a wide range of temperatures. In recent years, proton-conductive porous metal-organic frameworks (MOFs) exhibiting high proton-conducting properties (>10-2 S cm-1) have been extensively investigated due to their potential application in solid-state electrolytes. Their structural designability, crystallinity, and porosity are beneficial to fabricate a new type of proton conductor, providing a comprehensive conduction mechanism. For the proton-conductive MOFs, each component, such as the metal centres, organic linkers, and pore space, is manipulated by a judicious predesign strategy or post-synthetic modification to improve the mobile proton concentration with an efficient conducting pathway. In this review, we highlight rational design strategies for highly proton-conductive MOFs in terms of MOF components, with representative examples from recent years. Subsequently, we discuss the challenges and future directions for the design of proton-conductive MOFs.

Free-standing metal-organic framework (MOF) monolayers by self-assembly of polymer-grafted nanoparticles

We report a general method for the synthesis of free-standing, self-assembled MOF monolayers (SAMMs) at an air-water interface using polymer-brush coated MOF nanoparticles. UiO-66, UiO-66-NH2, and MIL-88B-NH2 were functionalized with a catechol-bound chain-transfer agent (CTA) to graft poly(methyl methacrylate) (PMMA) from the surface of the MOF using reversible addition-fragmentation chain transfer polymerization (RAFT). The polymer-coated MOFs were self-assembled at the air-water interface into monolayer films ∼250 nm thick and capable of self-supporting at a total area of 40 mm2. Mixed-particle films were prepared through the assembly of MOF mixtures, while multilayer films were achieved through sequential transfer of the monolayers to a glass slide substrate. This method offers a modular and generalizable route to fabricate thin-films with inherent porosity and sub-micron thickness composed of a variety of MOF particles and functionalities.

Two-Step Elution Recovery of Cyanide Platinum Using Functional Metal Organic Resin

A novel functional ion-exchange/adsorption metal organic resin (MOR), TEBAC-HKUST-1, was prepared and characterized. Ethanedithiol was used as the grafting agent to introduce thiol groups onto HKUST-1, and 4-vinylbenzyl chloride was then grafted onto SH-HKUST-1 using thiol groups. Finally, the quaternary ammonium functional group was immobilized onto the carrier by performing a quaternization reaction. The structure and property of TEBAC-HKUST-1 MOR were characterized by TGA, N₂ adsorption–desorption, FTIR, SEM, and XRD. TEBAC-HKUST-1 MOR was used to remove metal cyanide complexes from wastewater. The adsorption was rapid, and the metal cyanide complexes including Pt(CN)₄²⁻, Co(CN)₆³⁻, Cu(CN)₃²⁻, and Fe(CN)₆³⁻ were removed in 30 min. TEBAC-HKUST-1 MOR exhibited a high stability in neutral and weak basic aqueous solutions. Furthermore, Pt(II) could be efficiently recovered through two-step elution. The recovery rate of Pt(II) for five cycles were over 92.0% in the mixture solution containing Pt(CN)₄²⁻, Co(CN)₆³⁻, Cu(CN)₃²⁻, and Fe(CN)₆³⁻. The kinetic data were best fitted with the pseudo second-order model. Moreover, the isothermal data were best fitted with the Langmuir model. The thermodynamic results show that the adsorption is a spontaneous and exothermic process. TEBAC-HKUST-1 MOR not only exhibited excellent ability for the rapid removal of metal cyanide complexes, but also provided a new idea for the extraction of noble metals from cyanide-contaminated water.

Deep oxidative desulfurization of model fuels catalysed by immobilized ionic liquid on MIL-100(Fe)

Deep desulfurization of fossil fuels has become urgently required because of the serious pollution by the large-scale use of fossil fuels. In this study, [PrSO₃HMIm]HSO₄@MIL-100(Fe) was synthesized by wet-impregnation of the ionic liquid (IL) of [PrSO₃HMIm]HSO₄ on MIL-100(Fe). The construction of [PrSO₃HMIm]HSO₄@MIL-100(Fe) was then confirmed by X-ray powder diffraction, N₂ adsorption-desorption experiments, infrared spectroscopy and elemental analysis, and then applied in the oxidative desulfurization of model fuels. In comparison with the corresponding IL, [PrSO₃HMIm]HSO₄@MIL-100(Fe) showed an enhanced performance in the desulfurization rate of model fuels due to the increase of the mass transfer rate. Under the optimized conditions (oxidant to sulphur ratio = 25, oil to acetonitrile ratio = 1, and temperature = 60 °C), a sulphur removal rate of 99.3% was observed (initial sulphur concentration = 50 ppm). The sulphur removal of three sulphur compounds by catalytic oxidation and extraction followed the order of dibenzothiophene (DBT) > thiophene (T) > benzothiophene (BT).

MOP × MOF: Collaborative Combination of Metal-Organic Polyhedra and Metal-Organic Framework for Proton Conductivity

We report a hybrid solid system, UMOM-100-a and UMOM-100-b, synthesized by incorporation of Cu-based metal-organic polyhedra (MOPs) into a porous metal-organic framework (MOF) host, PCN-777. The MOP guests have acid (SO₃^-) functional groups, acting as functionalized nanocages, whereas the porosity is still maintained for proton conductivity. The key parameter for the UMOM-100 series is the number of MOPs inside a MOF, which controls the ratio between meso- and micropores, polarity, and finally proton conductivity. This is an example demonstrating a new design strategy for porous solids to add active components into porous MOFs, opening up possibilities in other applications such as solid-state electrolytes and heterogeneous catalysts.

Highly Effective Removal of Metal Cyanide Complexes and Recovery of Palladium Using Quaternary-Ammonium-Functionalized MOFs

In this study, quaternary-ammonium-functionalized metal–organic frameworks (MOFs) Et-N-Cu(BDC-NH₂)(DMF), were prepared, characterized, and applied for the highly effective removal of metal cyanide complexes, including Pd(CN)₄²⁻, Co(CN)₆³⁻, and Fe(CN)₆³⁻. Batch studies were carried out, and the maximum adsorption capacities of Pd(II), Co(III), and Fe(III) reached 172.9, 101.0, and 102.6, respectively. Adsorption was rapid, and equilibrium was established within 30 min. Et-N-Cu(BDC-NH₂)(DMF) exhibited high thermal and chemical stability. Furthermore, absorbed Pd(CN)₄²⁻ was selectively recovered by two-step elution. First, Co(CN)₆³⁻ and Fe(CN)₆³⁻ were eluted with a 1.5 mol L⁻¹ KCl solution. Elution rates of Co(CN)₆³⁻ and Fe(CN)₆³⁻ were greater than 98.0%, whereas the elution percentage of Pd(CN)₄²⁻ was less than 2.0%. Second, >97.0% Pd(CN)₄²⁻ on the loaded MOFs was eluted using a 2.0 mol L⁻¹ KI solution. The recovery rate of Pd(CN)₄²⁻ was greater than 91.0% after five testing cycles. Adsorption isotherms, kinetics models, and adsorption thermodynamics of Pd(CN)₄²⁻ on Et-N-Cu(BDC-NH₂) (DMF) were also systematically investigated. The Et-N-Cu(BDC-NH₂) (DMF) absorbent exhibited a rapid, excellent ability for the adsorption of metal cyanide complexes.

Acidic ionic liquid based UiO-67 type MOFs: a stable and efficient heterogeneous catalyst for esterification

Acidic ionic liquid groups were introduced into the frameworks successfully and the resulting materials showed excellent activity.

Ionic Liquid/Metal-Organic Framework Composites: From Synthesis to Applications

Metal-organic frameworks (MOFs) have been widely studied for different applications owing to their fascinating properties such as large surface areas, high porosities, tunable pore sizes, and acceptable thermal and chemical stabilities. Ionic liquids (ILs) have been recently incorporated into the pores of MOFs as cavity occupants to change the physicochemical properties and gas affinities of MOFs. Several recent studies have shown that IL/MOF composites show superior performances compared with pristine MOFs in various fields, such as gas storage, adsorption and membrane-based gas separation, catalysis, and ionic conductivity. In this review, we address the recent advances in syntheses of IL/MOF composites and provide a comprehensive overview of their applications. Opportunities and challenges of using IL/MOF composites in many applications are reviewed and the requirements for the utilization of these composite materials in real industrial processes are discussed to define the future directions in this field.

Synthesis of Hierarchically Structured Hybrid Materials by Controlled Self-Assembly of Metal-Organic Framework with Mesoporous Silica for CO2 Adsorption

The HKUST-1@SBA-15 composites with hierarchical pore structure were constructed by in situ self-assembly of metal-organic framework (MOF) with mesoporous silica. The structure directing role of SBA-15 had an obvious impact on the growth of MOF crystals, which in turn affected the morphologies and structural properties of the composites. The pristine HKUST-1 and the composites with different content of SBA-15 were characterized by XRD, N₂ adsorption-desorption, SEM, TEM, FT-IR, TG, XPS, and CO₂-TPD techniques. It was found that the composites were assembled by oriented growth of MOF nanocrystals on the surfaces of SBA-15 matrix. The interactions between surface silanol groups and metal centers induced structural changes and resulted in the increases in surface areas as well as micropore volumes of hybrid materials. Besides, the additional constraints from SBA-15 also restrained the expansion of HKUST-1, contributing to their smaller crystal sizes in the composites. The adsorption isotherms of CO₂ on the materials were measured and applied to calculate the isosteric heats of adsorption. The HS-1 composite exhibited an increase of 15.9% in CO₂ uptake capacity compared with that of HKUST-1. Moreover, its higher isosteric heats of CO₂ adsorption indicated the stronger interactions between the surfaces and CO₂ molecules. The adsorption rate of the composite was also improved due to the introduction of mesopores. Ten cycles of CO₂ adsorption-desorption experiments implied that the HS-1 had excellent reversibility of CO₂ adsorption. This study was intended to provide the possibility of assembling new composites with tailored properties based on MOF and mesoporous silica to satisfy the requirements of various applications.

Ionic liquid/metal–organic framework hybrid generated by ion-exchange reaction: synthesis and unique catalytic activity

The catalytic activity of an ionic liquid was drastically changed by immobilization inside an MOF by ion-exchange reaction.