Schiff base MOFs and their derivatives for sequestration and degradation of pollutants: present and future

Removal of contaminants via adsorption and catalysis have received a significant interest as energy and money-saving solutions for treating the world's wastewater. Metal-organic frameworks (MOFs), a newly discovered class of porous crystalline materials, have demonstrated tremendous promise in the removal and destruction of contaminants for water purification. In order to improve the interactions of MOFs with the target pollutants for their selective removal and degradation, the Schiff base functionalities emerged as promising active sites. Through pre- and post-synthetic alterations, Schiff base functionalities are integrated into the pore cages of MOF adsorbent materials. To understand the adsorptive/catalytic mechanism, potential interactions between the Schiff base sites and the target pollutants are discussed. Based on cutting-edge techniques for their synthesis, this paper examines current developments in the creation of Schiff base-functionalized MOFs as innovative materials for adsorptive removal and catalytic degradation of contaminants for water remediation.

NiGA MOF-based dispersive micro solid phase extraction coupled to temperature-assisted evaporation using low boiling point solvents for the extraction and preconcentration of butylated hydroxytoluene and some phthalate and adipate esters

The first-ever attempt to apply nickel gallic acid metal-organic framework (NiGA MOF) in analytical method development was done in this research by the extraction of some plasticizers from aqueous media. The greenness of the method is owing to the use of gallic acid and nickel as safe reagents and water as the safest solvent. Low boiling point solvents were applied as desorption solvents that underwent temperature-assisted evaporation in the preconcentration step. Performing the evaporation using a low-temperature water bath for a short period of time streamlines the preconcentration section. Into the solution of interest enriched with sodium sulfate, a mg amount of NiGA MOF was added alongside vortexing to extract the analytes. Following centrifugation and discarding the supernatant, a μL level of diethyl ether was added onto the analyte-loaded NiGA MOF particles and vortexed. The analyte-enriched diethyl ether phase was transferred into a conical bottom glass test tube and located in a water bath set at the temperature of 35 °C under a laboratory hood. After the evaporation, a μL level of 1,2-dibromoethane was added to the test tube and vortexed to dissolve the analytes from the inner perimeter of the tube. One microliter of the organic phase was injected into a gas chromatograph equipped with flame ionization detection. Appreciable extraction recoveries (61-98%), high enrichment factors (305-490), low limits of detection (0.80-1.74 μg L-1) and quantification (2.64-5.74 μg L-1), and wide linear ranges (5.74-1000 μg L-1) were obtained at the optimum conditions.

Nickel hexacyanoferrate nanoparticle-decorated 3D rGO composites-based electrochemical sensing platform for detection of di-2-ethylhexyl phthalate

A label-free and efficient electrochemical (EC) sensing platform for di-2-ethylhexyl phthalate (DEHP) was developed based on in situ probe nickel hexacyanoferrate nanoparticle (NiHCF NP)-decorated three-dimensional reduced graphene oxide (3D rGO) composites. NiHCF NPs in the composites as an in situ probe show a pair of well-defined peaks with good reversibility and stability. Coupling 3D rGO with NiHCF NPs not only improved the electron transfer capability of NiHCF NPs but also provided more sites for aptamer immobilization. The synthesized NiHCF NP-decorated 3D rGO composites were used to act as a substrate for the immobilization of anti-DEHP aptamer by the covalent bonding method. The designed EC sensing platform displays excellent sensing performance for DEHP with a low detection limit of 3.64 pg/L, and a linear working range of 0.01 - 1000 ng/L. The application of the sensing platform to actual environmental samples was studied and satisfactory results were obtained. Thus, the proposed EC sensing platform would provide a potential tool for efficient detection of pollutants in the environment.

Chain-Shattering Polymers as Degradable Microdispersive Solid-Phase Extraction Sorbents

A chain-shattering polymer (CSP) has been proposed as a microdispersive solid-phase extraction (μdSPE) sorbent in a proof-of-concept study of degradable materials for analytical purposes. The responsive CSP was synthesized from 1,3,5-tris(bromomethyl)-2-nitrobenzene acting as the self-immolative trigger responsive unit and 2,6-naphthalenedicarboxylic acid as aromatic linker to enhance noncovalent aromatic interactions with the analytes. The CSP was characterized and applied as a μdSPE sorbent of a group of plasticizers, which were selected as model analytes, from different types of environmental water samples (tap, waste, and spring waters). Gas chromatography coupled to mass spectrometry detection was used for analyte determination. Mean recovery values were in the range of 80%–118% with RSD values below 22%. After the extraction, the polymer could be efficiently degraded by UV irradiation or by chemical reduction, recovering the aromatic linker. This work has proved the potential of CSPs as recyclable sorbents, paving the way to more environmentally benign analytical procedures.

Highly sensitive and selective photoelectrochemical aptasensing of di-2-ethylhexyl phthalate based on graphene quantum dots decorated TiO2 nanotube arrays

A photoelectrochemical (PEC) sensing platform for di-2-ethylhexyl phthalate (DEHP) was constructed using graphene quantum dots decorated TiO₂ nanotube arrays (GQDs-decorated TiO₂ NTs) as the transducer species and the anti-DEHP aptamer as the biological recognition element. GQDs were synthesized using the alkali-mediated hydrothermal method, and then anchored onto the TiO₂ NTs uniformly and intimately via pronounced electrostatic interaction. Coupling GQDs with TiO₂ NTs not only enhanced visible-light absorption, but promoted charge separation and transportation, exhibiting excellent photocurrent response, and PEC activity. Various means were conducted to explore morphologies, optical, structural and PEC properties of the materials. As an identification unit, the anti-DEHP aptamer molecules were immobilized on GQDs-decorated TiO₂ NTs using a cross-linking coupling method. The developed PEC sensing platform exhibits excellent sensing behavior for DEHP, and provides a low detection limit of 0.1 ng/L, high selectivity and stability. Meanwhile, its application in real environmental samples was evaluated and satisfying results were achieved. Thus, the established sensing platform provides a promising tool to detect DEHP in the environment.

On the use of metal-organic frameworks for the extraction of organic compounds from environmental samples

The determination of trace metals and organic contaminants in environmental samples, such as water, air, soil, and sediment, is until today a challenging process for the analytical chemistry. Metal-organic frameworks (MOFs) are novel porous nanomaterials that are composed of metal ions and an organic connector. These materials are gaining more and more attention due to their superior characteristics, such as high surface area, tunable pore size, mechanical and thermal stability, luminosity, and charge transfer ability between metals and ligands. Among the various applications of MOFs are gas storage, separation, catalysis, and drug delivery. Recently, MOFs have been successfully introduced in the field of sample preparation for analytical chemistry and they have been used for sample pretreatment of various matrices. This review focuses on the applications of MOFs as novel adsorbents for the extraction of organic compounds from environmental samples.

Development and Application of Aptamer-Based Surface-Enhanced Raman Spectroscopy Sensors in Quantitative Analysis and Biotherapy

Surface-enhanced Raman scattering (SERS) is one of the most special and important Raman techniques. An apparent Raman signal can be observed when the target molecules are absorbed onto the surface of the SERS substrates, especially on the "hot spots" of the substrates. Early research focused on exploring the highly active SERS substrates and their detection applications in label-free SERS technology. However, it is a great challenge to use these label-free SERS sensors for detecting hydrophobic or non-polar molecules, especially in complex systems or at low concentrations. Therefore, antibodies, aptamers, and antimicrobial peptides have been used to effectively improve the target selectivity and meet the analysis requirements. Among these selective elements, aptamers are easy to use for synthesis and modifications, and their stability, affinity and specificity are extremely good; they have been successfully used in a variety of testing areas. The combination of SERS detection technology and aptamer recognition ability not only improved the selection accuracy of target molecules, but also improved the sensitivity of the analysis. Variations of aptamer-based SERS sensors have been developed and have achieved satisfactory results in the analysis of small molecules, pathogenic microorganism, mycotoxins, tumor marker and other functional molecules, as well as in successful photothermal therapy of tumors. Herein, we present the latest advances of the aptamer-based SERS sensors, as well as the assembling sensing platforms and the strategies for signal amplification. Furthermore, the existing problems and potential trends of the aptamer-based SERS sensors are discussed.

Mixed-Metal MOFs: Unique Opportunities in Metal-Organic Framework (MOF) Functionality and Design

Mixed-metal metal-organic frameworks (MM-MOFs) can be considered to be those MOFs having two different metals anywhere in the structure. Herein we summarize the various strategies for the preparation of MM-MOFs and some of their applications in adsorption, gas separation, and catalysis. It is shown that compared to homometallic MOFs, MM-MOFs bring about the opportunity to take advantage of the complexity and the synergism derived from the presence of different metal ions in the structure of MOFs. This is reflected in a superior performance and even stability of MM-MOFs respect to related single-metal MOFs. Emphasis is made on the use of MM-MOFs as catalysts for tandem reactions.

Application of a Pillared-Layer Zn-Triazolate Metal-Organic Framework in the Dispersive Miniaturized Solid-Phase Extraction of Personal Care Products from Wastewater Samples

The pillared-layer Zn-triazolate metal-organic framework (CIM-81) was synthesized, characterized, and used for the first time as a sorbent in a dispersive micro-solid phase extraction method. The method involves the determination of a variety of personal care products in wastewaters, including four preservatives, four UV-filters, and one disinfectant, in combination with ultra-high performance liquid chromatography and UV detection. The CIM-81 MOF, constructed with an interesting mixed-ligand synthetic strategy, demonstrated a better extraction performance than other widely used MOFs in D-µSPE such as UiO-66, HKUST-1, and MIL-53(Al). The optimization of the method included a screening design followed by a Doehlert design. Optimum conditions required 10 mg of CIM-81 MOF in 10 mL of the aqueous sample at a pH of 5, 1 min of agitation by vortex and 3 min of centrifugation in the extraction step; and 1.2 mL of methanol and 4 min of vortex in the desorption step, followed by filtration, evaporation and reconstitution with 100 µL of the initial chromatographic mobile phase. The entire D-µSPE-UHPLC-UV method presented limits of detection down to 0.5 ng·mL-1; intra-day and inter-day precision values for the lowest concentration level (15 ng·mL-1)-as a relative standard deviation (in %)-lower than 8.7 and 13%, respectively; average relative recovery values of 115%; and enrichment factors ranging from ~3.6 to ~34. The reuse of the CIM-81 material was assessed not only in terms of maintaining the analytical performance but also in terms of its crystalline stability.

A SERS aptasensor for sensitive and selective detection of bis(2-ethylhexyl) phthalate

Bis(2-ethylhexyl)phthalate (DEHP) is an endocrine disruptor commonly present in plastic products, such as PVC tubes and water bottles. In this work, a surface enhanced Raman spectroscopy (SERS) based aptasensor was developed and utilized for rapid, easy, sensitive, and specific detection of trace DEHP. A DEHP aptamer was immobilized on magnetic particles. Raman reporter molecule conjugated silver nanoparticles were clustered and coated with silica to provide a stable SERS signal. The SERS silica particle was then functionalized with 1,2,4-benzenetricarboxylic acid 1,2-bis(2-ethylhexyl) ester to increase its affinity to the DEHP aptamer. In the presence of a sample with DEHP, the high-affinity SERS silica particle competes with the DEHP molecule to bind with the aptamer on the magnetic particle. By measuring the signal of free SERS silica particles in the supernatant after magnetic separation, the concentration of DEHP in the sample was quantitatively determined. The developed DEHP aptasensor had a detection range from 0.008 to 182 nM and a limit of detection (LOD) of 8 pM. The aptasensor also showed high selectivity when exposed to interferents with analogous structures. The aptasensor was successfully tested for the detection of DEHP spiked in tap water, bottled water, and a carbonate beverage. The developed SERS-based aptasensor provides a rapid, sensitive, and easy-to-use method for the quantitative detection of DEHP in environmental and food analysis.

This paper reports a SERS aptasensor developed to detect DEHP at relevant ranges with ultrasensitive performance and good selectivity.

Ultrasound-assisted dispersive magnetic solid phase extraction based on metal–organic framework/1-(2-pyridylazo)-2-naphthol modified magnetite nanoparticle composites for speciation analysis of inorganic tin

A novel magnetic metal–organic framework (MMOF) consisting of MIL-101(Cr) and 1-(2-pyridylazo)-2-naphthol-modified magnetite nanoparticles was synthesized and utilized for the ultrasound-assisted magnetic solid phase extraction and speciation analysis of Sn(ii) and Sn(iv) at trace amounts.

Recent advances in metal-organic frameworks for adsorption of common aromatic pollutants

This review (with 85 refs.) summarizes the recent literature on the adsorption of common aromatic pollutants by using modified metal-organic frameworks (MOFs). Four kinds of aromatic pollutants are discussed, namely benzene homologues, polycyclic aromatic hydrocarbons (PAHs), organic dyes and their intermediates, and pharmaceuticals and personal care products (PPCPs). MOFs are shown to be excellent adsorbents that can be employed to both the elimination of pollutants and to their extraction and quantitation. Adsorption mechanisms and interactions between aromatic pollutants and MOFs are discussed. Finally, the actual challenges of existence and the perspective routes towards future improvements in the field are addressed. Graphical abstract Recent advance on adsorption of common aromatic pollutants including benzene series, polycyclic aromatic hydrocarbons, organic dyes and their intermediates, pharmaceuticals and personal care products by metal-organic frameworks.

Morphology-dependent sensing performance of dihydro-tetrazine functionalized MOF toward Al(III)

A pillared MOF, [Zn(OBA)(H₂DPT)_0.5].DMF (TMU-34), based on dihydro tetrazine functionalized pillar spacer (H₂DPT=3,6-di(pyridin-4-yl)-1,4-dihydro-1,2,4,5-tetrazine) and V-shape dicarboxylate linker (H₂OBA=4,4'-oxybis(benzoic acid)) was synthesized by reflux and ultrasonic methods. The effects of sonication time, initial concentration of reagents and sonication power on size and morphology have been optimized. This MOF has been characterized by scanning electron microscopy, FT-IR spectra, X-ray powder diffraction and N₂ adsorption at 77K. Bulk and nano samples of TMU-34 have been applied in cation sensing for detection of Al(III) in presence of other cations (Na(I), Mg(II), Sr(II), Al(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Pb(II), Hg(II),Cr(III), Li(I), Fe(III), K(I)). The results show that nano powder of TMU-34 with uniform separated plate-like morphology (TMU-34-F) has higher detection limit and short response time compared to bulk material. So, in this work we show the application of luminescent metal-organic frameworks synthesized by sonochemistry approach in effective cation detection.

Trace amount determination of Cd(ii), Pb(ii) and Ni(ii) ions in agricultural and seafood samples after magnetic solid phase extraction by MIL-101(Cr)/phenylthiosemicarbazide-functionalized magnetite nanoparticle composite

Herein, a novel nanosorbent consisting of phenylthiosemicarbazide magnetite nanoparticles and MIL-101(Cr) was synthesized, characterized and utilized to magnetic solid phase extraction of some heavy metals in various agricultural and seafood samples.

Recent advances in metal-organic frameworks and covalent organic frameworks for sample preparation and chromatographic analysis

In the field of analytical chemistry, sample preparation and chromatographic separation are two core procedures. The means by which to improve the sensitivity, selectivity and detection limit of a method have become a topic of great interest. Recently, porous organic frameworks, such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), have been widely used in this research area because of their special features, and different methods have been developed. This review summarizes the applications of MOFs and COFs in sample preparation and chromatographic stationary phases. The MOF- or COF-based solid-phase extraction (SPE), solid-phase microextraction (SPME), gas chromatography (GC), high-performance liquid chromatography (HPLC) and capillary electrochromatography (CEC) methods are described. The excellent properties of MOFs and COFs have resulted in intense interest in exploring their performance and mechanisms for sample preparation and chromatographic separation.

Speciation analysis of inorganic arsenic in food and water samples by electrothermal atomic absorption spectrometry after magnetic solid phase extraction by a novel MOF-199/modified magnetite nanoparticle composite

A novel magnetic metal–organic framework (MOF-199/dithiocarbamate modified magnetite nanoparticles composite) was synthesized and utilized for speciation analysis of inorganic arsenic.