Adsorption properties of β-cyclodextrin modified hydrogel for methylene blue

With the development of dye and printing, production wastewater has become one of the most primary pollution sources of water and soil pollution. Most of the dyes are toxic substances, which have the "three-way" effect of carcinogenic, teratogenic and mutagenic. Therefore, it is a very difficult but significant issue to deal with the dye in the wastewater. Here, we report a study on low-cost, high-capacity hydrogels that remove water-soluble dyes. The hydrogel is prepared by crosslinking the β-cyclodextrin and functional monomer: acrylamido and 2-acrylamide-2-methylpropane sulfonic acid by aqueous solution polymerization, meanwhile, alkaline hydrolysis is also an important step for adsorption performance. After alkaline hydrolysis, the amide and sulfonic groups in the hydrogel were converted into carboxylate and sulfonate, which was beneficial to the adsorption of cationic dyes. This polymer could remove 96.58% methylene blue (400 mg/L) and only requires 0.02 wt%. Its maximum adsorption capacity for methylene blue could reach 2638.22 mg/g under equilibrium condition. It is the most powerful adsorbent used to treat dye wastewater, according to the report. It also provides some references for hydrogel treatment of dye wastewater.

The use of olive tree pruning waste compost to sequestrate methylene blue dye from aqueous solution

Considering that quality water supplies are diminishing and climate disorder affects water cycle, wastewaters should be decontaminated for reuse either by the same establishment or in agriculture for the growth of industrial plants. In that context, much research work has been focused on the development of low cost biosorbents. In this study, the effect of composting on the adsorption capacity of olive tree pruning waste (OTPW) biomass for methylene blue (MB) removal from aqueous solutions was examined. Composting procedure may improve the sorption properties of the raw organic materials, is economical and easy to apply. MB adsorption on both OTPW and composted olive tree pruning waste (COTPW) biomasses was found to be fast. The maximum monolayer adsorption capacity obtained from Langmuir isotherm was estimated to be 129.87 and 250.00 mg/g for OTPW and COTPW, respectively, indicating that composting procedure greatly improved the adsorptive properties of OTPW. The raise of temperature from 25°C to 60°C decreased the efficiency of OTPW for MB removal whereas the adsorption capacity of COTPW was not affected at high temperatures. Moreover, COTPW showed constant adsorption over the 2-8 solution pH range.