Biogenic sulfide for azo dye decolorization from textile dyeing wastewater

Azo dye is the most versatile class of dyes used in the textile industry. Although the sulfidogenic process shows superiority in the removal of azo dye, the role of biogenic sulfide produced by sulfate-reducing bacteria (SRB) in the decolorization of azo dye is unclear. This study explored the mechanism of biogenic sulfide for removal of a model azo dye (Direct Red 81 (DR 81)) through biotic and abiotic batch tests with analysis of intermediates of the azo dye degradation. The results showed that biogenic sulfide produced from sulfate reduction directly cleaved two groups of azo bond (-NN-), thereby achieving decolorization. Moreover, the decolorization rate was enhanced by nearly 3-fold (up to 42 ± 1 mg/L-hr; removal efficiency > 99%) by adding an external carbon source or elevating the initial azo dye concentration. This study showed that biogenic sulfide plays an essential role in azo dye decolorization and provides a new avenue for the potential application of biogenic sulfide from the sulfidogenic system for the treatment of azo dye-laden wastewater.

Adsorption of direct yellow brown D3G from aqueous solution using loaded modified low-cost lignite: Performance and mechanism

Low-cost lignite-based, copper-containing adsorbents (Cu-raw) were developed through a simple ultrasonic impregnation protocol for enhanced adsorption of direct yellow brown D3G (DYB) from aqueous solutions while treating copper-containing wastewater. The adsorbent was characterized by X-ray diffraction (XRD), scanning electron microscopy-energy dispersion spectroscopy (SEM-EDS), Fourier transform infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS). The adsorption isotherms and kinetics were studied, and the factors that affect the adsorption, such as adsorbent dosage and solution pH, were investigated. The results showed that DYB adsorption was highly pH dependent and the isotherm of adsorption could be well described by the Langmuir-Freundlich model and the maximum DYB adsorption capacity was estimated to be 369 mg/g at 25°C. The electrostatic and chelating interactions were the main interfacial interaction mechanism, and the synergetic removal performance of lignite toward cationic metal ions and anionic dye was shown. The kinetic data were well fitted to the pseudo-second-order equation, indicating that chemical sorption was the rate-limiting step. The findings reported in this work highlight the potential of using lignite as an effective low-cost adsorbent for the removal of organic pollutants from wastewater.

Use of Nanotechnology for the Bioremediation of Contaminants: A Review

Contaminants, organic or inorganic, represent a threat for the environment and human health and in recent years their presence and persistence has increased rapidly. For this reason, several technologies including bioremediation in combination with nanotechnology have been explored to identify more systemic approaches for their removal from environmental matrices. Understanding the interaction between the contaminant, the microorganism, and the nanomaterials (NMs) is of crucial importance since positive and negative effects may be produced. For example, some nanomaterials are stimulants for microorganisms, while others are toxic. Thus, proper selection is of paramount importance. The main objective of this review was to analyze the principles of bioremediation assisted by nanomaterials, nanoparticles (NPs) included, and their interaction with environmental matrices. It also analyzed the response of living organisms employed to remediate the contaminants in the presence of nanomaterials. Besides, we discuss the international regulatory frame applicable to these technologies and how they might contribute to sustainability.

Facilitated bioreduction of nitrobenzene by lignite acting as low-cost and efficient electron shuttle

The searching for efficient and economical redox mediators to promote the treatment of wastewater containing recalcitrant organic compounds is greatly needed. In this study, the redox mediator activities of four different lignite samples to facilitate the bioreduction of nitrobenzene by Shewanella oneidensis MR-1 were tested for the first time. The initial nitrobenzene reduction rate was increased by 40.4%-90.3% in the presence of 50 mg/L of different lignite samples. Lignite collected from Xinjiang (XJL) having more oxygenated groups performed better in enhancing nitrobenzene bioreduction. The stimulating effects increased with the increase of lignite dosage (0-200 mg/L) and the decrease of lignite particle size (150-0.1 μm). However, the pristine XJL samples with assorted sizes of particles exhibited better stimulating effects than size-fractionated ones, implying that different-sized XJL particles might have synergetic effects on the bioreduction process. When humic acid or iron was removed from XJL, its promoting effects were decreased, demonstrating the crucial roles of both components in lignite-enhanced nitrobenzene bioreduction. Nitric acid treatment could form more oxygenated moieties on lignite surface, which played vital roles in promoting nitrobenzene bioreduction. The initial nitrobenzene bioreduction rate in the presence of HNO₃-treated XJL was 80.8% higher than that obtained with pristine XJL. This study proposed an effective and readily available redox mediator that could be applied to promote the bioreduction of recalcitrant electrophilic pollutants.

Treatability of hexabromocyclododecane using Pd/Fe nanoparticles in the soil-plant system: Effects of humic acids

Hexabromocyclododecane (HBCD) is a persistent organic pollutant that accumulates in soil and sediments, however, it has been difficult to degrade HBCD with developed remediation technologies so far. In this study, degradation of HBCD by bimetallic iron-based nanoparticles (NPs) under both aqueous and soil conditions considering the effects of humic acids (HAs) and tobacco plant was investigated. In the aqueous solution, 99% of the total HBCD (15 mM) was transformed by Pd/nFe (1 g L-1) within 9 h of treatment and the HBCD debromination by Pd/nFe increased with the addition of HAs. In the soil system, 13%, 15%, 41% and 27% of the total HBCD were removed by treatments consisting of plant only, plant with HAs, plant with NPs and plant + NPs + HAs, respectively, compared to the HBCD removal in an unplanted soil. The 221-986 ng/g of HBCD were detected inside the plant after the treatments, and HAs showed considerable influence on the selective bioaccumulation of HBCD stereoisomers in the plant. Overall, this approach represents a meaningful attempt to develop an efficient and eco-friendly technology for HBCD removal, and it provides advantages for the sustainable remediation of recalcitrant emerging contaminants in soils.