Neural regeneration ability of Polypyrrole-Collagen-Quercetin composite in the spinal cord injury

Spinal cord injury (SCI) is a major clinical problem in young patients. The major hurdle in SCI regeneration is the replacement of lost nerve communication signals due to injury. Here we have prepared a biocompatible electrical conductive composite such as Collagen-Polypyrrole combined with Quercetin (Col-PPy-Qur) composite. The prepared composites are characterized for their chemical functionality and morphology by the FTIR and SEM & TEM analysis, respectively. The Col-PPy-Qur composite observed electrical conductivity at 0.0653 s/cm due to the conductive Polypyrrole polymer present in the composite. The Col-PPy-Qur composite exhibits a mechanical strength of 0.1281 mPa, similar to the native human spinal cord's mechanical strength. In order to explore the regeneration potential, the viability of the composite has been tested with human astrocyte cells (HACs). The Tuj1 and GFAF marker expression was quantized by RT-PCR analysis. Increased Tuj1 and decreased GFAF expression by the Col-PPy-Qur composite indicated the potential differentiation ability of the HACs into neuron cells. The results indicated that the Col-PPy-Qur composite could have good regeneration and differentiation ability, better biocompatibility, and suitable mechanical and conductivity properties. It can act as an excellent strategy for spinal cord regeneration in the nearer future.

Polymeric Systems for the Controlled Release of Flavonoids

Flavonoids are natural compounds that are attracting great interest in the biomedical field thanks to the wide spectrum of their biological properties. Their employment as anticancer, anti-inflammatory, and antidiabetic drugs, as well as for many other pharmacological applications, is extensively investigated. One of the most successful ways to increase their therapeutic efficacy is to encapsulate them into a polymeric matrix in order to control their concentration in the physiological fluids for a prolonged time. The aim of this article is to provide an updated overview of scientific literature on the polymeric systems developed so far for the controlled release of flavonoids. The different classes of flavonoids are described together with the polymers most commonly employed for drug delivery applications. Representative drug delivery systems are discussed, highlighting the most common techniques for their preparation. The flavonoids investigated for polymer system encapsulation are then presented with their main source of extraction and biological properties. Relevant literature on their employment in this context is reviewed in relationship to the targeted pharmacological and biomedical applications.

Organometallic Folate Gold Nanoparticles Ameliorate Lipopolysaccharide-Induced Oxidative Damage and Inflammation in Zebrafish Brain

Synthesized organometallic gold-based folate nanoparticles (FAuNPs) were characterized, and its defense against lipopolysaccharide (LPS)-induced brain inflammation in Zebra fish was proven. Vitamin entrapment efficiency of these particles was found to be nearly 70%. The in vitro pH-dependent drug release dialysis study of FAuNPs confirmed a slow, sustained, and gradual release of folate for a period of 24 h. Both AuNPs and FAuNPs did not cause any marked changes in food intake, body weight, color, behavioral pattern, blood parameters, and hepatotoxicity. Histology of liver showed no changes between treated and control groups of fishes. The ex vivo study showed significant uptake of FAuNPs to free folate in folate receptor negative Hek293 cells, confirming a strategy to overcome folate deficiency in the brain. Antioxidant status and activities of few crucial brain enzymes were also measured to assess the brain function and found to be returned to the basal level, following FAuNP treatment. The transcription factor NRF2-Keap 1 expression pattern was also noted, and a prominent modulation was observed in the LPS-treated and FAuNP-administered group. Decisive brain enzymes like AChE and Na⁺K⁺ATPase were decreased significantly after LPS treatment, which is restored with FAuNP treatment. Caspases increased sharply after LPS treatment and diminished following FAuNP treatment. We conclude that FAuNP due to its high physical stability and uptake could be utilized against severe brain inflammation, leading to brain injury and neurodegeneration.

Targeting mangiferin loaded N-succinyl chitosan-alginate grafted nanoparticles against atherosclerosis - A case study against diabetes mediated hyperlipidemia in rat

Mangiferin (MGF), from Mangifera indica is well reported for its hypoglycemic activity and hypolipidemic activity. However, MGF suffers therapeutic limitation due to poor solubility causing disparaging bioavailability. Herein to address this problem, we have incorporated MGF in alginate grafted N-succinylated chitosan (NSC) nanomatrix. Characterization by molecular docking, FT-IR and 2D-NMR (COSY) has revealed that MGF could reinforce interaction with NSC. The OH and CH₂OH groups of MGF may set interactions with pyranosic OH, CH₂OH, NH₂ (or NH-succinyl and COOH-succinyl) of NSC. The NSC-MGF nanoconjugate revealed a spherical particle geometry of 100 ∼ 200 nm size. The encapsulated MGF showed 100% release in vitro. In vivo, NSC-MGF nanoconjugate revealed blood glucose lowering from 300 mg/dL to ∼ 90 mg/dL as well as ∼ 37% lowering of total plasma cholesterol. This is well comparative to the earlier reports which acknowledged only 1 ∼ 36% lowering of plasma cholesterol with MGF. Furthermore, NSC-MGF lowered serum trigyceride to ∼ 61%, while in earlier studies, only 10 ∼ 40% serum triglycerides reduction was found with solitary MGF.

Preparation and Characterization of Chitosan-Alginate Microspheres Loaded with Quercetin

The aim of this paper was to formulate microspheres based on biodegradable polymers (chitosan and sodium alginate), using the complex coacervation technique. Subsequently, the prepared microspheres were loaded with quercetin (QUE), a pharmacological active ingredient insoluble in water and unstable to light, temperature and air. After preparation, the loaded microspheres underwent several studies for physical chemical characterization (performed by scanning electron microscopy-SEM, laser 3D scanning, and thermal analysis-TA). Furthermore, they were analyzed in order to obtain information regarding swelling index, drug entrapment, and in vitro release capacity. The obtained experimental data demonstrated 86.07% entrapment of QUE into the microspheres, in the case of the one with the highest Ch concentration. Additionally, it was proved that such systems allow the controlled release of the active drug over 24 h at the intestinal level. SEM micrographs proved that the prepared microspheres have a wrinkled surface, with compact structures and a large number of folds. On the basis of the TA analysis, it was concluded that the obtained microspheres were thermally stable, facilitating their usage at normal physiological temperatures as drug delivery systems.

Calcium-Silicate-Incorporated Gellan-Chitosan Induced Osteogenic Differentiation in Mesenchymal Stromal Cells

Gellan-chitosan (GC) incorporated with CS: 0% (GC-0 CS), 10% (GC-10 CS), 20% (GC-20 CS) or 40% (GC-40 CS) w/w was prepared using freeze-drying method to investigate its physicochemical, biocompatible, and osteoinductive properties in human bone-marrow mesenchymal stromal cells (hBMSCs). The composition of different groups was reflected in physicochemical analyses performed using BET, FTIR, and XRD. The SEM micrographs revealed excellent hBMSCs attachment in GC-40 CS. The Alamar Blue assay indicated an increased proliferation and viability of seeded hBMSCs in all groups on day 21 as compared with day 0. The hBMSCs seeded in GC-40 CS indicated osteogenic differentiation based on an amplified alkaline-phosphatase release on day 7 and 14 as compared with day 0. These cells supported bone mineralization on GC-40 CS based on Alizarin-Red assay on day 21 as compared with day 7 and increased their osteogenic gene expression (RUNX2, ALP, BGLAP, BMP, and Osteonectin) on day 21. The GC-40 CS-seeded hBMSCs initiated their osteogenic differentiation on day 7 as compared with counterparts based on an increased expression of type-1 collagen and BMP2 in immunocytochemistry analysis. In conclusion, the incorporation of 40% (w/w) calcium silicate in gellan-chitosan showed osteoinduction potential in hBMSCs, making it a potential biomaterial to treat critical bone defects.

pH-Sensitive Alginate/Carboxymethyl Chitosan/Aminated Chitosan Microcapsules for Efficient Encapsulation and Delivery of Diclofenac Sodium

To develop an effective pH-sensitive drug carrier, alginate (Alg), carboxymethyl chitosan (CMCs), and aminated chitosan (AmCs) derivatives were employed in this study. A simple ionic gelation technique was employed to formulate Alg-CMCs@AmCs dual polyelectrolyte complexes (PECs) microcapsules as a pH-sensitive carrier for efficient encapsulation and release of diclofenac sodium (DS) drug. The developed microcapsules were characterized by Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analyzer (TGA), and scanning electron microscope (SEM). The results clarified that formation of dual PECs significantly protected Alg microcapsules from rapid disintegration at colon conditions (pH 7.4), and greatly reduced their porosity. In addition, the dual PECs microcapsules can effectively encapsulate 95.4% of DS-drug compared to 86.3 and 68.6% for Alg and Alg-CMCs microcapsules, respectively. Higher DS-release values were achieved in simulated colonic fluid [SCF; pH 7.4] compared to those obtained in simulated gastric fluid [SGF; pH 1.2]. Moreover, the drug burst release was prevented and a sustained DS-release was achieved as the AmCs concentration increased. The results confirmed also that the developed microcapsules were biodegradable in the presence of the lysozyme enzyme. These findings emphasize that the formulated pH-sensitive microcapsules could be applied for the delivery of diclofenac sodium.

Glycyrrhizin mediated liver-targeted alginate nanogels delivers quercetin to relieve acute liver failure

Acute liver failure is an uncommon and dramatic clinical syndrome with a high risk of mortality. Previous treatments existed some limitations of poor bioavailability and targeting the efficiency of drugs. In this study, a novel glycyrrhizin mediated liver-targeted alginate nanogels, which can deliver the antioxidant quercetin to the liver for the treatment of acute liver injury. In vitro radical scavenging results showed that the antioxidant activity of quercetin was increased 81-fold. The tissue distribution results indicated that glycyrrhizin-mediated nanogels showed stronger fluorescence intensity in the liver, which improved liver targeting and therapeutic efficacy. Quercetin-glycyrrhizin nanogels were more effective at restoring liver injury as indicated on serum markers, including alanine transaminase, aspartate aminotransferase, and total bilirubin. The histopathology result showed that quercetin-glycyrrhizin nanogels reversed liver damage. Oxidative parameters of malondialdehyde and glutathione s-transferase were decreased, which provided supporting evidence of antioxidation. Moreover, quercetin-glycyrrhizin nanogels were more effective in down-regulating the inflammation-related gene expression of tumor necrosis factor-α, interleukin-6, inducible nitric oxide synthase and monocyte chemotactic protein-1. In conclusion, the novel glycyrrhizin mediated liver-targeted alginate nanogels might be a promising treatment for acute liver failure.

Application of quercetin flavonoid based hybrid nanocomposites: A review

Natural bioflavonoids are an essential component of dietary supplements possessing antimicrobial properties. Many of the bioflavonoids have resulted in positive antitumor, anticancer, antibacterial, antifungal, anti-inflammatory properties, but the efficacy remains low due to toxicity at the molecular level whereas antiviral property limits to negative. The synergistic link between nanoscience and flavonoid chemistry enhances the epidemiological properties of flavonoid and also diminish the antimicrobial resistivity (AMR) by forming their hybrid nanocomposites. Nanochemistry uses various nanocomposite and nanomaterials for biosensing the flavonoids and their delivery as a drug. The quercetin flavonoid and its derivatives such as rutin, and myricetin are used for sensing and drug delivery. Quercetin with 15Carbon-5Hydroxyl chemical scaffold has been explored for a few decades for the development of hybrid nanocomposite and nanomaterial with metallic as well as organic nano co-composites. This quercetin flavonoid based hybrid nanocomposites seemed to show a significant effect on In vitro and some animal model processes along with attenuating lipid peroxidation, platelet aggregation, and capillary permeability actions. This review mainly focused on the hybrid nanoscience of quercetin bioflavonoid and its application in numerous biological, material fields with a future perspective.

A pH-sensitive delivery system based on N-succinyl chitosan-ZnO nanoparticles for improving antibacterial and anticancer activities of curcumin

Inherent selective cytotoxicity, antibacterial activity and unique physicochemical properties of ZnO nanostructures and chitosan (CS) make them promising candidates for drug delivery. In this study, ZnO nanoparticles functionalized by N-succinyl chitosan as a pH-sensitive delivery system were synthesized to enhance the therapeutic potential of curcumin (CUR). CS coated-ZnO nanoparticles were synthesized by a co-precipitation method in the presence of CS. Chemical modification of CS-ZnO particles was performed by succinic anhydride for introducing -COOH functional groups which were then activated using 1,1'‑carbonyldiimidazole for CUR conjugation. The spherical-like CUR-conjugated system (CUR-CS-ZnO) with the average particle size of 40 nm presented significantly enhanced water dispersibility versus free CUR. The experimental study of CUR release from the system showed a pH-sensitive release profile, which enabled drug delivery to tumors and infection sites. MTT and Annexin-V FITC/PI assays revealed the superior anticancer activity of CUR-CS-ZnO compared to free CUR against breast cancer cells (MDA-MB-231) by inducing the apoptotic response with no cytotoxic effects on HEK293 normal cells. Moreover, CUR conjugation to the system notably dropped the MIC (25 to 50-fold) and MBC values (10 to 40-fold) against S. aureus and E. coli. The features qualify the formulation for anticancer and antimicrobial applications in the future.

Comparison of Traditional and Ultrasound-Enhanced Electrospinning in Fabricating Nanofibrous Drug Delivery Systems

We investigated nozzleless ultrasound-enhanced electrospinning (USES) as means to generate nanofibrous drug delivery systems (DDSs) for pharmaceutical and biomedical applications. Traditional electrospinning (TES) equipped with a conventional spinneret was used as a reference method. High-molecular polyethylene oxide (PEO) and chitosan were used as carrier polymers and theophylline anhydrate as a water-soluble model drug. The nanofibers were electrospun with the diluted mixture (7:3) of aqueous acetic acid (90% v/v) and formic acid solution (90% v/v) (with a total solid content of 3% w/v). The fiber diameter and morphology of the nanofibrous DDSs were modulated by varying ultrasonic parameters in the USES process (i.e., frequency, pulse repetition frequency and cycles per pulse). We found that the USES technology produced nanofibers with higher fiber diameter (402 ± 127 nm) than TES (77 ± 21 nm). An increase of a burst count in USES increased the fiber diameter (555 ± 265 nm) and the variation in fiber size. The slight-to-moderate changes in a solid state (crystallinity) were detected when compared the nanofibers generated by TES and USES. In conclusion, USES provides a promising alternative for aqueous-based fabrication of nanofibrous DDSs for pharmaceutical and biomedical applications.

Polyelectrolyte Multicomponent Colloidosomes Loaded with Nisin Z for Enhanced Antimicrobial Activity against Foodborne Resistant Pathogens

Food grade micro- or nano-carrier systems (NCS) are being developed to improve the controlled release of antimicrobial agents. To augment the stability of liposomal NCS and to overcome the limitations associated with the use of free bacteriocin (nisin) in the food system, multi-component colloidosomes (MCCS) were developed by electrostatic interactions between anionic alginate and cationic chitosan (multilayer) around phospholipids based liposomes (core). Zeta-sizer results revealed the average diameter of 145 ± 2 nm, 596 ± 3 nm, and 643 ± 5 nm for nano-liposome (NL), chitosomes (chitosan coated NL) and MCCS, respectively. Zeta potential values of NCS varied from −4.37 ± 0.16 mV to 33.3 ± 6 mV, thus both chitosomes (CS) and MCCS were positively charged. Microstructure analysis by scanning electron microscope (SEM) revealed relatively higher size of MCCS with smooth and round morphology. TGA and DSC based experiments revealed that MCCS were thermally more stable than uncoated liposomes. Encapsulation efficiency of nisin in MCCS was observed to be 82.9 ± 4.1%, which was significantly higher than NL (56.5 ± 2.5%). FTIR analyses confirmed the cross-linking between sodium alginate and chitosan layer. Both qualitative (growth kinetics) and quantitative (colony forming unit) antimicrobial assays revealed that nisin loaded MCCS have superior potential to control resistant foodborne pathogens including Staphylococcus aureus, Listeria monocytogenes, and Enterococcus faecalis, (5.8, 5.4, and 6.1 Log CFUmL⁻¹ reduction, respectively) as compared to free nisin, loaded NL or CS. Controlled release kinetics data fitted with Korsmeyer–Peppas model suggested that nisin release from MCCS followed Fickian diffusion. Cytotoxic studies on human blood cells and HepG2 cell lines revealed hemocompatibility and non-toxicity of MCCS. Thus, due to enhanced controlled release, stability and biocompatibility; these multi-component colloidosomes can be useful for incorporating antimicrobial agents into functional foods, beverages and pharmaceutical products to combat pathogenic and spoilage bacteria.

Preparation, characterization and in vivo evaluation of pH sensitive, safe quercetin-succinylated chitosan-alginate core-shell-corona nanoparticle for diabetes treatment

The study aims for development of an efficient polymeric carrier for evaluating pharmaceutical potentialities in modulating the drug profile of quercetin (QUE) in anti-diabetic research. Alginate and succinyl chitosan are focused in this investigation for encapsulating quercetin into core-shell nanoparticles through ionic cross linking. The FT-IR, XRD, NMR, SEM, TEM, drug entrapment and loading efficiency are commenced to examine the efficacy of the prepared nanoparticles in successful quercetin delivery. Obtained results showed the minimum particle size of ∼91.58nm and ∼95% quercetin encapsulation efficiently of the particles with significant pH sensitivity. Kinetics of drug release suggested self-sustained QUE release following the non-fickian trend. A pronounced hypoglycaemic effect and efficient maintenance of glucose homeostasis was evident in diabetic rat after peroral delivery of these quercetin nanoparticles in comparison to free oral quercetin. This suggests the fabrication of an efficient carrier of oral quercetin for diabetes treatment.