Dye-sensitized solar cells strike back

Dye-sensitized solar cells (DSCs) are celebrating their 30th birthday and they are attracting a wealth of research efforts aimed at unleashing their full potential. In recent years, DSCs and dye-sensitized photoelectrochemical cells (DSPECs) have experienced a renaissance as the best technology for several niche applications that take advantage of DSCs' unique combination of properties: at low cost, they are composed of non-toxic materials, are colorful, transparent, and very efficient in low light conditions. This review summarizes the advancements in the field over the last decade, encompassing all aspects of the DSC technology: theoretical studies, characterization techniques, materials, applications as solar cells and as drivers for the synthesis of solar fuels, and commercialization efforts from various companies.

Influence of Surface and Structural Variations in Donor-Acceptor-Donor Sensitizers on Photoelectrocatalytic Water Splitting

Conjugated organic chromophores composed of linked donor (D) and acceptor (A) moieties have attracted considerable attention for photoelectrochemical applications. In this work, we compare the optoelectronic properties and photoelectrochemical performance of two D-A-D structural isomers with thiophene-X-carboxylic acid (X denotes 3 and 2 positions) derivatives and 2,1,3-benzothiadiazole as the D and A moieties, respectively. 5,5'-(Benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-3-carboxylic acid), BTD1, and 5,5'-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-2-carboxylic acid), BTD2, were employed in the study to understand how structural isomers affect surface attachments within chromophore-catalyst assemblies and their influence on charge-transfer dynamics. Crystal structures revealed that varying the position of the -COOH anchoring group causes the molecules to either contort out of a plane (BTD1) or adopt a near-perfect planar conformation (BTD2). BTD1 and BTD2 were co-loaded with either a water oxidation catalyst, [Ru(2,6-bis(1-methylbenzimidazol-2-yl)pyridine)-(4,4'-((HO)₂OPCH₂)₂-2,2'-bipyridine)(OH₂)]², RuCt²⁺, or proton reduction catalyst [Ni(P₂^PhN₂^{C₆H₄CH₂PO₃H₂})₂]²⁺, NiCt²⁺, on oxide electrodes to facilitate photodriven water splitting reactions. Emission quenching measurements indicate that both BTD1 and BTD2 inject electrons into n-type SnO₂|TiO₂ electrodes and holes into p-type NiO semiconductors from their respective excited states at high efficiencies >60%. Photocurrent densities of chromophore-catalyst assemblies obtained using linear sweep voltammetry (LSV) show that BTD2-sensitized photoanodes generate significantly more photocurrent than BTD1-sensitized electrodes; however, both exhibit similar performances at the photocathode. Photoelectrocatyltic measurements demonstrate that both BTD1 and BTD2 performed similarly, generating Faradaic efficiencies of 39 and 38% at the anode or 61 and 79% at the cathode. Transient absorption measurements suggest that the differences between the LSV and photoelectrocatalytic measurements result from the differences in quantum yields of the photogenerated redox equivalents, which is also a reflection of the varying metal oxide surface conformation. Our findings suggest that BTD2 should be investigated further in photocathodic studies since it has the structural advantage of being incorporated into diverse types of chromophore-catalyst assemblies.

Naphthalene diimides: perspectives and promise

In this review, we describe the developments in the field of naphthalene diimides (NDIs) from 2016 to the presentday. NDIs are shown to be an increasingly interesting class of molecules due to their electronic properties, large electron deficient aromatic cores and tendency to self-assemble into functional structures. Almost all NDIs possess high electron affinity, good charge carrier mobility, and excellent thermal and oxidative stability, making them promising candidates for applications in organic electronics, photovoltaic devices, and flexible displays. NDIs have also been extensively studied due to their potential real-world uses across a wide variety of applications including supramolecular chemistry, sensing, host-guest complexes for molecular switching devices, such as catenanes and rotaxanes, ion-channels, catalysis, and medicine and as non-fullerene accepters in solar cells. In recent years, NDI research with respect to supramolecular assemblies and mechanoluminescent properties has also gained considerable traction. Thus, this review will assist a wide range of readers and researchers including chemists, physicists, biologists, medicinal chemists and materials scientists in understanding the scope for development and applicability of NDI dyes in their respective fields through a discussion of the main properties of NDI derivatives and of the status of emerging applications.

Nanotechnology for catalysis and solar energy conversion

This roadmap on Nanotechnology for Catalysis and Solar Energy Conversion focuses on the application of nanotechnology in addressing the current challenges of energy conversion: 'high efficiency, stability, safety, and the potential for low-cost/scalable manufacturing' to quote from the contributed article by Nathan Lewis. This roadmap focuses on solar-to-fuel conversion, solar water splitting, solar photovoltaics and bio-catalysis. It includes dye-sensitized solar cells (DSSCs), perovskite solar cells, and organic photovoltaics. Smart engineering of colloidal quantum materials and nanostructured electrodes will improve solar-to-fuel conversion efficiency, as described in the articles by Waiskopf and Banin and Meyer. Semiconductor nanoparticles will also improve solar energy conversion efficiency, as discussed by Boschloo et al in their article on DSSCs. Perovskite solar cells have advanced rapidly in recent years, including new ideas on 2D and 3D hybrid halide perovskites, as described by Spanopoulos et al 'Next generation' solar cells using multiple exciton generation (MEG) from hot carriers, described in the article by Nozik and Beard, could lead to remarkable improvement in photovoltaic efficiency by using quantization effects in semiconductor nanostructures (quantum dots, wires or wells). These challenges will not be met without simultaneous improvement in nanoscale characterization methods. Terahertz spectroscopy, discussed in the article by Milot et al is one example of a method that is overcoming the difficulties associated with nanoscale materials characterization by avoiding electrical contacts to nanoparticles, allowing characterization during device operation, and enabling characterization of a single nanoparticle. Besides experimental advances, computational science is also meeting the challenges of nanomaterials synthesis. The article by Kohlstedt and Schatz discusses the computational frameworks being used to predict structure-property relationships in materials and devices, including machine learning methods, with an emphasis on organic photovoltaics. The contribution by Megarity and Armstrong presents the 'electrochemical leaf' for improvements in electrochemistry and beyond. In addition, biohybrid approaches can take advantage of efficient and specific enzyme catalysts. These articles present the nanoscience and technology at the forefront of renewable energy development that will have significant benefits to society.

Assembly, charge-transfer and solar cell performance with porphyrin-C60 on NiO for p-type dye-sensitized solar cells

A series of zinc tetraphenylporphyrin photosensitizers furnished with three different anchoring groups, benzoic acid, phenylphosphonate and coumarin-3-carboxylic acid, were prepared using 'click' methodology. All three gave modest performances in liquid junction devices with I₃^-/I^- as the electrolyte. The distinct spectroscopic properties of the porphyrins allowed a detailed investigation of the adsorption behaviour and kinetics for charge transfer at the NiO|porphyrin interface. The adsorption behaviour was modelled using the Langmuir isotherm model and the phosphonate anchoring group was found to have the highest affinity for NiO (6.65 × 10⁴M^-1) and the fastest rate of adsorption (2.46 × 10⁷cm²mol^-1min^-1). The photocurrent of the p-type dye-sensitized solar cells increased with increasing dye loading and corresponding light harvesting efficiency of the electrodes. Coordinating the zinc to a pyridyl-functionalized fullerene (C₆₀PPy) extended the charge-separated state lifetime from ca 200 ps to 4 ns and a positive improvement in the absorbed photon to current conversion efficiency was observed. Finally, we confirmed the viability of electron transfer from the appended C₆₀PPy to phenyl-C61-butyric acid methyl ester, a typical electron transporting layer in organic photovoltaics. This has implications for assembling efficient solid-state tandem solar cells in the future. This article is part of a discussion meeting issue 'Energy materials for a low carbon future'.

Collaboration between experiment and theory in solar fuels research

As the challenges in science increase in scope and interdisciplinarity, collaboration becomes increasingly important.

Ultrafast Dynamics of Charge Transfer and Photochemical Reactions in Solar Energy Conversion

For decades, ultrafast time-resolved spectroscopy has found its way into an increasing number of applications. It has become a vital technique to investigate energy conversion processes and charge transfer dynamics in optoelectronic systems such as solar cells and solar-driven photocatalytic applications. The understanding of charge transfer and photochemical reactions can help optimize and improve the performance of relevant devices with solar energy conversion processes. Here, the fundamental principles of photochemical and photophysical processes in photoinduced reactions, in which the fundamental charge carrier dynamic processes include interfacial electron transfer, singlet excitons, triplet excitons, excitons fission, and recombination, are reviewed. Transient absorption (TA) spectroscopy techniques provide a good understanding of the energy/electron transfer processes. These processes, including excited state generation and interfacial energy/electron transfer, are dominate constituents of solar energy conversion applications, for example, dye-sensitized solar cells and photocatalysis. An outlook for intrinsic electron/energy transfer dynamics via TA spectroscopic characterization is provided, establishing a foundation for the rational design of solar energy conversion devices.

A Phosphonic Acid Anchoring Analogue of the Sensitizer P1 for p-Type Dye-Sensitized Solar Cells

We report the synthesis and characterization of the first example of an organic dye, PP1, for p-type dye-sensitized solar cells (DSCs) bearing a phosphonic acid anchoring group. PP1 is structurally related to the benchmarking dye, P1, which possesses a carboxylic acid anchor. The solution absorption spectra of PP1 and P1 are similar (PP1 has λmax = 478 nm and εmax = 62,800 dm3 mol−1 cm−1), as are the solid-state absorption spectra of the dyes adsorbed on FTO/NiO electrodes. p-Type DSCs with NiO as semiconductor and sensitized with P1 or PP1 perform comparably. For PP1, short-circuit current densities (JSC) and open-circuit voltages (VOC) for five DSCs lie between 1.11 and 1.45 mA cm−2, and 119 and 143 mV, respectively, compared to ranges of 1.55–1.80 mA cm−2 and 117–130 mV for P1. Photoconversion efficiencies with PP1 are in the range 0.054–0.069%, compared to 0.065–0.079% for P1. Electrochemical impedance spectroscopy, open-circuit photovoltage decay and intensity-modulated photocurrent spectroscopy have been used to compare DSCs with P1 and PP1 in detail.

Molecular Engineering of Zinc-Porphyrin Sensitisers for p-Type Dye-Sensitised Solar Cells

Design of novel efficient light-harvesters for p-type dye-sensitised solar cells (DSSCs) is indispensable for further advances in this photovoltaic technology. Herein, a novel D-π-A (D=donor, π=π-conjugated linker, A=acceptor) sensitiser, ZnP1, featuring an electron acceptor, perylenemonoimide (PMI), connected to an electron donor, di(p-carboxyphenyl)amine (DCPA), through fluorene and a zinc(II) porphyrin with alkyl chains as a π-conjugated bridge is introduced. Spectroscopic and electrochemical characterisation of this dye along with a newly synthesised PMI-free reference dye ZnP0 has been undertaken to demonstrate strong electron coupling between the DCPA donor and PMI acceptor subunits through the porphyrin ring in ZnP1, which redshifts the light absorption onset to the near-IR region. When integrated into p-DSSCs based on a mesoporous nickel(II) oxide semiconductor electrode and a tris(acetylacetonato) iron(III/II) redox mediator, ZnP1 exhibits an onset of the incident photon-to-current conversion efficiency at 800 nm and a power conversion efficiency of up to 0.92 % under simulated 100 mW cm^-2 AM 1.5 G irradiation. This is the highest efficiency of the porphyrin-based p-DSSCs hitherto reported.

Tunable Rh2(II,II) Light Absorbers as Excited-State Electron Donors and Acceptors Accessible with Red/Near-Infrared Irradiation

A series of dirhodium(II,II) paddlewheeel complexes of the type cis-[Rh₂(μ-DTolF)₂(μ-L)₂][BF₄]₂, where DTolF = N,N'-di( p-tolyl)formamidinate and L = 1,8-naphthyridine (np), 2-(pyridin-2-yl)-1,8-naphthyridine (pynp), 2-(quinolin-2-yl)-1,8-naphthyridine (qnnp), and 2-(1,8-naphthyridin-2-yl)quinoxaline (qxnp), were synthesized and characterized. These molecules feature new tridentate ligands that concomitantly bridge the dirhodium core and cap the axial positions. The complexes absorb light strongly throughout the ultraviolet/visible range and into the near-infrared region and exhibit relatively long-lived triplet excited-state lifetimes. Both the singlet and triplet excited states exhibit metal/ligand-to-ligand charge transfer (ML-LCT) in nature as determined by transient absorption spectroscopy and spectroelectrochemistry measurements. When irradiated with low-energy light, these black dyes are capable of undergoing reversible bimolecular electron transfer both to the electron acceptor methyl viologen and from the electron donor p-phenylenediamine. Photoinduced charge transfer in the latter was inaccessible with previous Rh₂(II,II) complexes. These results underscore the fact that the excited state of this class of molecules can be readily tuned for electron-transfer reactions upon simple synthetic modification and highlight their potential as excellent candidates for p- and n-type semiconductor applications and for improved harvesting of low-energy light to drive useful photochemical reactions.

Effect of the triazole ring in zinc porphyrin-fullerene dyads on the charge transfer processes in NiO-based devices

Three covalently linked donor–acceptor zinc porphyrin–fullerene (ZnP–C₆₀) dyads were tested as sensitizers in NiO-based dye-sensitized solar cells (DSCs).

Probing single-molecule electron-hole transfer dynamics at a molecule-NiO semiconductor nanocrystalline interface

Interfacial charge transfer dynamics in dye-sensitized NiO nanoparticles are being investigated for photocathodes in p-type dye-sensitized solar cells. In the photoreaction, after fast electron transfer from NiO to a molecule, the recombination of the hole in the nanoparticles with the electron in a reduced molecule plays an important role in the charge separation process and solar energy harvesting. Nevertheless, knowledge of the interfacial charge recombination (CR) rate and its mechanism is still limited due to the complex photoinduced electron and hole dynamics and lack of characterization of the inhomogeneity of the dynamics. Here, we report our work on probing interfacial charge recombination dynamics in Zn(ii)-5,10,15,20-tetra(3-carboxyphenyl)porphyrin (m-ZnTCPP) dye-sensitized NiO nanoparticles by correlating single-molecule fluorescence blinking dynamics with charge transfer dynamics using single-molecule photon-stamping spectroscopy. The correlated analyses of single-molecule fluorescence intensity, lifetime, and blinking reveal the intrinsic distribution and temporal fluctuation of interfacial charge transfer reactivity, which are closely related to site-specific molecular interactions and dynamics.

Designing Squaraines to Control Charge Injection and Recombination Processes in NiO-based Dye-Sensitized Solar Cells

Herein, the synthesis of a new family of squaraines (SQs) and their application in p-type dye-sensitized solar cells (DSSCs) is presented. In particular, two sets of SQs were designed featuring either two or four anchoring carboxylic groups combined with either oxygen or dicyanovinyl central groups. The SQs were characterized by using a joint theoretical, photophysical, and electrochemical approach. Importantly, the presence of different central groups forces a frozen cis (dicyanovinyl group) or a trans (oxygen group) SQ conformation. Based on the latter, the current work enables a direct comparison between cis and trans isomers as well as the impact of a different number of anchors. Considering their electron-accepting and light-harvesting character, they were tested in NiO-based DSSCs. Photocurrent-voltage, incident photon-to-current conversion efficiency (IPCE), and electrochemical impedance spectroscopy measurements were performed. By virtue of their different symmetry, stereochemistry, and number of carboxylic groups, altered adsorption behavior onto NiO electrodes as well as diverse charge injection and charge recombination dynamics were noted under operation conditions. SQs with four linkers in a frozen cis isomerism show the best charge collection properties among the investigated SQs, providing a valuable guideline for the molecular design of future SQs for p-type DSSCs. In addition, we assembled tandem DSSCs featuring SQ/NiO photocathodes and N719/TiO₂ photoanodes. The IPCE of the resulting tandem DSSCs implies light harvesting throughout most of the visible part of the solar spectrum owing to the complementary absorption features of SQ and N719.

A simple synthesis method to prepare a molybdenum oxide hole-transporting layer for efficient polymer solar cells

We report a simple synthetic method to prepare amorphous molybdenum oxide (p-MoO₃) using a favorably stable peroxomolybdic acid organosol as the precursor solution prepared by an ultrasonic reaction for the first time.