Adsorption of ionic contaminants from complex water matrices by versatile chitosan-based beads

Most adsorbents are currently restricted by their single function in pollutant removal from complex wastewater. Herein, we constructed a versatile chitosan-based adsorbent (MC-DA) by grafting amphoteric copolymers with high pH-responsiveness property, aiming at the removal of multiple ionic contaminants. Specifically, the surface charge and hydrophobicity/hydrophilicity of MC-DA can be finely tuned under different pH conditions. As a result, the effective adsorption of cationic methylene blue (MB) and anionic Acid Orange 7 (AO7) with capacities of 627.4 mg/g and 1146.8 mg/g were achieved respectively, superior to most reported materials. Regarding the characterization results, the adsorption mechanisms for MB adsorption were electrostatic and hydrophobic interactions, while the electrostatic attraction was the main driving force for AO7 adsorption. Apart from the versatile adsorption performance, high acid resistance (pH ≥ 2.0), good reusability and rapid separation property under an external magnetic field suggested MC-DA's promising environmental benefits and practical application potential in water remediation.

Multi-responsive Pickering emulsifiers: a comprehensive study on the emulsification-demulsification behavior of modified chitosan-coated Fe3O4 nanocomposites

The surface characteristics of stimuli-responsive Pickering emulsifiers can be modified by external environmental triggers, making them highly versatile in various applications. In this study, we report three novel organic-inorganic composite structure emulsifiers. These emulsifiers were designed with a core of magnetic Fe3O4 particles, surrounded by a protective silica layer, and coated on the exterior with three distinct types of modified chitosan (CS). Experimental results demonstrate that these emulsifiers can stabilize emulsion systems consisting of liquid paraffin and deionized water at a concentration of 0.5 wt%. The unique properties of the modified CS coatings allowed for the controlled demulsification of two types of emulsions by adjusting the proton concentration. Additionally, these emulsifiers exhibited magnetic-responsive demulsification under the control of an external magnetic field. The findings of this study provide valuable insights into the design and construction of multi-responsive chitosan-based magnetic Pickering emulsifiers with controllable properties.

Development and evaluation of a pH-responsive Mimosa pudica seed mucilage/β- cyclodextrin-co-poly(methacrylate) hydrogel for controlled drug delivery: In vitro and in vivo assessment

In this comprehensive investigation, a novel pH-responsive hydrogel system comprising mimosa seed mucilage (MSM), β-cyclodextrin (β-CD), and methacrylic acid (MAA) was developed via free radical polymerization technique to promote controlled drug delivery. The hydrogel synthesis involved strategic variations in polymer, monomer, and crosslinker content in fine-tuning its drug-release properties. The resultant hydrogel exhibited remarkable pH sensitivity, selectively liberating the model drug (Capecitabine = CAP) under basic conditions while significantly reducing release in an acidic environment. Morphological, thermal, and structural analyses proved that CAP has a porous texture, high stability, and an amorphous nature. In vitro drug release experiments showcased a sustained and controlled release profile. Optimum release (85.33 %) results were recorded over 24 h at pH 7.4 in the case of MMB9. Pharmacokinetic evaluation in healthy male rabbits confirmed bioavailability enhancement and sustained release capabilities. Furthermore, rigorous toxicity evaluations and histopathological analyses ensured the safety and biocompatibility of the hydrogel. This pH-triggered drug delivery system can be a promising carrier system for drugs involving frequent administrations.

Evaluating physiochemical characteristics of tragacanth gum-gelatin network hydrogels designed through graft copolymerization technique

The present work deals with the evaluation of the physiochemical and biomedical properties of hydrogels derived from copolymerization of tragacanth gum (TG) and gelatin for use in drug delivery (DD) applications. Copolymers were characterized by field emission-scanning electron micrographs (FE-SEM), electron dispersion X-ray analysis (EDAX), Fourier transform infrared spectroscopy (FTIR), 13C-nuclear magnetic resonance (NMR), thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analysis. FE-SEM revealed heterogeneous morphology and XRD analysis demonstrated an amorphous nature with short range pattern of polymer chains within the copolymers. The release of the drug ofloxacin occurred through a non-Fickian diffusion mechanism and the release profile was best described by the Korsmeyer-Peppas kinetic model. The hydrogels exhibited blood compatibility and demonstrated a thrombogenicity value of 75.63 ± 1.98 % during polymer-blood interactions. Polymers revealed mucoadhesive character during polymer-mucous membrane interactions and required 119 ± 8.54 mN detachment forces to detach from the biological membrane. The copolymers illustrated the antioxidant properties as evidenced by 2, 2'-diphenylpicrylhydrazyl (DPPH) assay which demonstrated a 65.71 ± 3.68 % free radical inhibition. Swelling properties analysis demonstrated that by change in monomer and cross linker content during the reaction increased the crosslinking of the network. These results suggest that the pore size of network hydrogels could be controlled as per the requirement of DD systems. The copolymers were prepared at optimized reaction conditions using 14.54 × 10-1 molL-1 of acrylic acid monomer and 25.0 × 10-3 molL-1 of crosslinker NNMBA. The optimized hydrogels exhibited a crosslink density of 2.227 × 10-4 molcm-3 and a mesh size of 7.966 nm. Additionally, the molecular weight between two neighboring crosslinks in the hydrogels was determined to be 5332.209 gmol-1.The results indicated that the combination of protein-polysaccharide has led to the development of hydrogels suitable for potential applications in sustained drug delivery.

Applications of inverse opal photonic crystal hydrogels in the preparation of acid-base color-changing materials

Hydrogels are three-dimensional (3D) crosslinked network hydrophilic polymers that have structures similar to that of biological protein tissue and can quickly absorb a large amount of water. Opal photonic crystals (OPCs) are a kind of photonic band gap material formed by the periodic arrangement of 3D media, and inverse opal photonic crystals (IOPCs) are their inverse structure. Inverse opal photonic crystal hydrogels (IOPCHs) can produce corresponding visual color responses to a change in acid or alkali in an external humid environment, which has wide applications in chemical sensing, anti-counterfeiting, medical detection, intelligent display, and other fields, and the field has developed rapidly in recent years. In this paper, the research progress on fast acid-base response IOPCHs (pH-IOPCHs) is comprehensively described from the perspective of material synthesis. The technical bottleneck of enhancing the performance of acid-base-responsive IOPCHs and the current practical application limitations are summarized, and the development prospects of acid-base-responsive IOPCHs are described. These comprehensive analyses are expected to provide new ideas for solving problems in the preparation and application of pH-IOPCHs.

Injectable hydrogels for cartilage and bone tissue regeneration: A review

Annually, millions of patients suffer from irreversible injury owing to the loss or failure of an organ or tissue caused by accident, aging, or disease. The combination of injectable hydrogels and the science of stem cells have emerged to address this persistent issue in society by generating minimally invasive treatments to augment tissue function. Hydrogels are composed of a cross-linked network of polymers that exhibit a high-water retention capacity, thereby mimicking the wet environment of native cells. Due to their inherent mechanical softness, hydrogels can be used as needle-injectable stem cell carrier materials to mend tissue defects. Hydrogels are made of different natural or synthetic polymers, displaying a broad portfolio of eligible properties, which include biocompatibility, low cytotoxicity, shear-thinning properties as well as tunable biological and physicochemical properties. Presently, novel ongoing developments and native-like hydrogels are increasingly being used broadly to improve the quality of life of those with disabling tissue-related diseases. The present review outlines various future and in-vitro applications of injectable hydrogel-based biomaterials, focusing on the newest ongoing developments of in-situ forming injectable hydrogels for bone and cartilage tissue engineering purposes.

Drug-Loaded Biocompatible Chitosan Polymeric Films with Both Stretchability and Controlled Release for Drug Delivery

Chitosan is a natural polysaccharide with the advantageous qualities of biocompatibility and biodegradability, and it has recently been spotlighted as a soft material for a sustainable society. Advantages such as these are in demand for application in various biomaterials. Although extensive studies have been conducted on the preparation of chitosan films, overcoming the problems of weak mechanical properties remains a significant barrier. In the present study, we developed stretchable doxorubicin-loaded biocompatible chitosan films by adding acetic acid in controlled concentrations. The stretchable properties of doxorubicin-loaded chitosan film at various concentrations of acetic acid were measured. Elongation to the point of breakage reached 27% with a high concentration of acetic acid, which could be described as high stretchability. The release ratio of doxorubicin from chitosan film reached 70% with a high acetic acid concentration. The cytotoxicity of doxorubicin-loaded chitosan films was measured, and cancer spheroids had completely collapsed after 7 days. According to the results of skin permeability testing, use of the doxorubicin-loaded chitosan film is a plausible choice for a drug sealant.

pH Responsive Hydrogels for the Delivery of Capecitabine: Development, Optimization and Pharmacokinetic Studies

The objective of the current study was to achieve a sustained release profile of capecitabine (CAP), an anticancer agent frequently administered in conventional dosage form due to its short plasma half-life. A drug-loaded smart pH responsive chitosan/fenugreek-g-poly (MAA) hydrogel was synthesized by an aqueous free radical polymerization technique. The developed network was evaluated for capecitabine loading %, swelling response, morphology, structural and compositional characteristics, and drug release behavior. Significantly higher swelling and in vitro drug release rate were exhibited by formulations at pH 7.4 than at pH 1.2, demonstrating the pH responsive character of hydrogels. Swelling percentage and CAP loading ranged within 74.45-83.54% and 50.13-72.43%, respectively. Maximum release, up to 93%, was demonstrated over 30 h, evidencing the controlled release pattern of CAP from hydrogels. The optimized formulation was further screened for acute oral toxicity studies. No signs of oral, dermal, or ocular toxicities were noticed, confirming safety evidence of the network. Furthermore, pharmacokinetic analysis demonstrated the sustained release response of CAP from hydrogels as confirmed by a significant increase in plasma half-life (t_1/2) (13 h) and AUC (42.88 µg h/mL) of CAP. Based on these findings, fabricated hydrogels are strongly recommended as a biocompatible carrier for colorectal delivery of active agents.

4D Printing of Hydrogels: Innovation in Material Design and Emerging Smart Systems for Drug Delivery

Advancements in the material design of smart hydrogels have transformed the way therapeutic agents are encapsulated and released in biological environments. On the other hand, the expeditious development of 3D printing technologies has revolutionized the fabrication of hydrogel systems for biomedical applications. By combining these two aspects, 4D printing (i.e., 3D printing of smart hydrogels) has emerged as a new promising platform for the development of novel controlled drug delivery systems that can adapt and mimic natural physio-mechanical changes over time. This allows printed objects to transform from static to dynamic in response to various physiological and chemical interactions, meeting the needs of the healthcare industry. In this review, we provide an overview of innovation in material design for smart hydrogel systems, current technical approaches toward 4D printing, and emerging 4D printed novel structures for drug delivery applications. Finally, we discuss the existing challenges in 4D printing hydrogels for drug delivery and their prospects.

A Temperature/pH Double-Responsive and Physical Double-Crosslinked Hydrogel Based on PLA and Histidine

Hydrogel is a good drug carrier, widely used in the sustained-release aspect of tumor drugs, which can achieve the continuous release of drugs to the tumor sites. In this study, diethylene glycol monomethyl ether methacrylate (MEO2MA) and poly (ethylene glycol) methyl ether methacrylate (OEGMA) are temperature-sensitive monomers. N-Methacryloyl-L-Histidine (Mist) is pH sensitive monomer and ligand for metal coordination bond. The temperature-sensitive monomers and pH sensitive monomer with stereocomplex of modified polylactic acid (HEMA-PLLA30/PDLA30) were mixed, under 2,2'-azobis (2-methylpropionitrile) (AIBN) as radical initiator, polymer was formed by free-radical polymerization. The polymer was then immersed in ZnSO4 solution, the imidazole group of Mist monomer forms a tridentate metal coordination bond with Zn2+, temperature/pH double-responsive and physical double-crosslinked hydrogel was finally obtained. Comparing the hydrogen bond hydrogel, hydrogen bond and metal coordination bond double crosslinking hydrogel, metal coordination bond hydrogel, testing thermal stability, viscoelasticity, swelling, and morphology of three hydrogels. In addition, using UV-Visible spectroscopy (UV-Vis) to test the sustained release of the hydrophobic drug doxorubicin hydrochloride (DOX-HCl) in the human tumor environment (37 °C, pH = 5). We found that the temperature/pH double-responsive and physical double-crosslinked hydrogel had the most potential for the sustained drug release.

A novel pH-responsive nanoniosomal emulsion for sustained release of curcumin from a chitosan-based nanocarrier: emphasis on the concurrent improvement of loading, sustained release, and apoptosis induction

Curcumin application as an anti-cancer drug is faced with several impediments. This study has developed a platform that facilitates the sustained release of curcumin, improves loading efficiency, and anti-cancer activity. Montmorillonite (MMT) nanoparticles were added to chitosan (CS)-agarose (Aga) hydrogel and then loaded with curcumin (Cur) to prepare a curcumin-loaded nanocomposite hydrogel. The loading capacity increased from 63% to 76% by adding MMT nanoparticles to a chitosan-agarose hydrogel. Loading the fabricated nanocomposite in the nanoniosomal emulsion resulted in sustained release of curcumin under acidic conditions. Release kinetics analysis showed diffusion and erosion are the dominant release mechanisms, indicating non-fickian (or anomalous) transport based on the Korsmeyer-Peppas model. FTIR spectra confirmed that all nanocomposite components were present in the fabricated nanocomposite. Besides, XRD results corroborated the amorphous structure of the prepared nanocomposite. Zeta potential results corroborated the stability of the fabricated nanocarrier. Cytotoxicity of the prepared CS-Aga-MMT-Cur on MCF-7 cells was comparable to that of curcumin-treated cells (p <0.001). Moreover, the percentage of apoptotic cells increased due to the enhanced release profile resulting from the addition of MMT to the hydrogel and the incorporation of the fabricated nanocomposite into the nanoniosomal emulsion. To recapitulate, the current delivery platform improved loading, sustained release, and curcumin anti-cancer effect. Hence, this platform could be a potential candidate to mitigate cancer therapy restrictions with curcumin. This article is protected by copyright. All rights reserved.

Photocatalytic performance of 3D engineered chitosan hydrogels embedded with sulfur-doped C3N4/ZnO nanoparticles for Ciprofloxacin removal: Degradation and mechanistic pathways

Ciprofloxacin, a biotoxic micropollutant, is ubiquitously found in the water environment, which is a global concern. This study developed polymeric S-C3N4/ZnO-Chitosan (indexed as SCZ-CH) hydrogels for degrading Ciprofloxacin. The SCZ-CH hydrogels provided the Ciprofloxacin degradation efficiencies of ~93% and ~69% in UV and visible lights, respectively, at optimum conditions (SCZ-CH hydrogels with 2 g/L SCZ, 20 mg/L initial concentration, pH 5, and room temperature). In addition, immobilized SCZ-CH hydrogels structures enable easy separation of the SCZ catalyst from water. The spectroscopic and microscopic analyses of SCZ-CH hydrogels show multifaceted properties, like high oxygen concentrations, crystallinity, stacked structure, high roughness, and improved bandgap energy, which are responsible for the enhanced photocatalytic activity. The effects of water matrix and experimental conditions on Ciprofloxacin degradation were also studied, which suggested that the catalyst dose and solution pH have significant effects on photocatalytic activity. SCZ-CH hydrogels have shown good mineralization efficiency (~98%) and reusability (up to 10 cycles) for Ciprofloxacin removal. Superoxide radicals played an essential role in the degradation of Ciprofloxacin. The Ciprofloxacin molecules get degraded by driving radicals through oxidation, defluorination, substitution, and breaking of the rings. The proposed SCZ-CH hydrogels can be effectively used at a large scale to treat micropollutants.

Synthesis and Characterization of Acrylamide/Acrylic Acid Co-Polymers and Glutaraldehyde Crosslinked pH-Sensitive Hydrogels

This project aims to synthesize and characterize the pH-sensitive controlled release of 5-fluorouracil (5-FU) loaded hydrogels (5-FULH) by polymerization of acrylamide (AM) and acrylic acid (AA) in the presence of glutaraldehyde (GA) as a crosslinker with ammonium persulphate as an initiator. The formulation's code is named according to acrylamide (A1, A2, A3), acrylic acid (B1, B2, B3) and glutaraldehyde (C1, C2, C3). The optimized formulations were exposed to various physicochemical tests, namely swelling, diffusion, porosity, sol gel analysis, and attenuated total reflection-Fourier transform infrared (ATR-FTIR). These 5-FULH were subjected to kinetic models for drug release data. The 5-FU were shown to be soluble in distilled water and phosphate buffer media at pH 7.4, and sparingly soluble in an acidic media at pH 1.2. The ATR-FTIR data confirmed that the 5-FU have no interaction with other ingredients. The lowest dynamic (0.98 ± 0.04% to 1.90 ± 0.03%; 1.65 ± 0.01% to 6.88 ± 0.03%) and equilibrium swelling (1.85 ± 0.01% to 6.68 ± 0.03%; 10.12 ± 0.02% to 27.89 ± 0.03%) of formulations was observed at pH 1.2, whereas the higher dynamic (4.33 ± 0.04% to 10.21 ± 0.01%) and equilibrium swelling (22.25 ± 0.03% to 55.48 ± 0.04%) was recorded at pH 7.4. These findings clearly indicated that the synthesized 5-FULH have potential swelling characteristics in pH 6.8 that will enhance the drug's release in the same pH medium. The porosity values of formulated 5-FULH range from 34% to 62% with different weight ratios of AM, AA, and GA. The gel fractions data showed variations ranging from 74 ± 0.4% (A1) to 94 ± 0.2% (B3). However, formulation A1 reported the highest 24 ± 0.1% and B3 the lowest 09 ± 0.3% sol fractions rate among the formulations. Around 20% drug release from the 5-FULH was found at 1 h in an acidic media (pH1.2), whereas >65% of drug release (pH7.4) was observed at around 25 h. These findings concluded that GA crosslinked 5-FU loaded AM and AA based hydrogels would be a potential pH-sensitive oral controlled colon drug delivery carrier.

Synthesis, classification and properties of hydrogels: their applications in drug delivery and agriculture

Absorbent polymers or hydrogel polymer materials have an enhanced water retention capacity and are widely used in agriculture and medicine. The controlled release of bioactive molecules (especially drug proteins) by hydrogels and the encapsulation of living cells are some of the active areas of drug discovery research. Hydrogel-based delivery systems may result in a therapeutically advantageous outcome for drug delivery. They can provide various sequential therapeutic agents including macromolecular drugs, small molecule drugs, and cells to control the release of molecules. Due to their controllable degradability, ability to protect unstable drugs from degradation and flexible physical properties, hydrogels can be used as a platform in which various chemical and physical interactions with encapsulated drugs for controlled release in the system can be studied. Practically, hydrogels that possess biodegradable properties have aroused greater interest in drug delivery systems. The original three-dimensional structure gets broken down into non-toxic substances, thus confirming the excellent biocompatibility of the gel. Chemical crosslinking is a resource-rich method for forming hydrogels with excellent mechanical strength. But in some cases the crosslinker used in the synthesis of the hydrogels may cause some toxicity. However, the physically cross-linked hydrogel preparative method is an alternative solution to overcome the toxicity of cross-linkers. Hydrogels that are responsive to stimuli formed from various natural and synthetic polymers can show significant changes in their properties under external stimuli such as temperature, pH, light, ion changes, and redox potential. Stimulus-responsive hydrogels have a wider range of applications in biomedicine including drug delivery, gene delivery and tissue regeneration. Stimulus-responsive hydrogels loaded with multiple drugs show controlled and sustained drug release and can act as drug carriers. By integrating stimulus-responsive hydrogels, such as those with improved thermal responsiveness, pH responsiveness and dual responsiveness, into textile materials, advanced functions can be imparted to the textile materials, thereby improving the moisture and water retention performance, environmental responsiveness, aesthetic appeal, display and comfort of textiles. This review explores the stimuli-responsive hydrogels in drug delivery systems and examines super adsorbent hydrogels and their application in the field of agriculture.

Dual pH-/thermo-responsive chitosan-based hydrogels prepared using "click" chemistry for colon-targeted drug delivery applications

A dual pH-/thermo-responsive hydrogel was designed based on a polyelectrolyte complex of polyacrylic acid (PAA) and norbornene-functionalized chitosan (CsNb), which was synergized with chemical crosslinking using bistetrazine-poly(N-isopropyl acrylamide) (bisTz-PNIPAM). The thermo-responsive polymeric crosslinker, bisTz-PNIPAM, was synthesized via reversible addition-fragmentation transfer polymerization of NIPAM. FTIR, XRD, rheological and morphological analyses demonstrated the successful formation of the polyelectrolyte network. The highly porous structure generated through the in-situ "click" reaction between Tz and Nb resulted in a higher drug loading (29.35 %). The hydrogel (COOH/NH₂ mole ratio of 3:1) exhibited limited drug release (8.5 %) of 5-ASA at a pH of 2.2, but it provided an almost complete release (92 %) at pH 7.4 and 37 °C within 48 h due to the pH responsiveness of PAA, hydrogel porosity, and shrinkage behavior of PNIPAM. The hydrogels were biodegradable and non-toxic against human fibroblast cells, suggesting their considerable potential for a colon-targeted drug delivery system.

Stimuli-Responsive Polymeric Nanocarriers for Drug Delivery, Imaging, and Theragnosis

In the past few decades, polymeric nanocarriers have been recognized as promising tools and have gained attention from researchers for their potential to efficiently deliver bioactive compounds, including drugs, proteins, genes, nucleic acids, etc., in pharmaceutical and biomedical applications. Remarkably, these polymeric nanocarriers could be further modified as stimuli-responsive systems based on the mechanism of triggered release, i.e., response to a specific stimulus, either endogenous (pH, enzymes, temperature, redox values, hypoxia, glucose levels) or exogenous (light, magnetism, ultrasound, electrical pulses) for the effective biodistribution and controlled release of drugs or genes at specific sites. Various nanoparticles (NPs) have been functionalized and used as templates for imaging systems in the form of metallic NPs, dendrimers, polymeric NPs, quantum dots, and liposomes. The use of polymeric nanocarriers for imaging and to deliver active compounds has attracted considerable interest in various cancer therapy fields. So-called smart nanopolymer systems are built to respond to certain stimuli such as temperature, pH, light intensity and wavelength, and electrical, magnetic and ultrasonic fields. Many imaging techniques have been explored including optical imaging, magnetic resonance imaging (MRI), nuclear imaging, ultrasound, photoacoustic imaging (PAI), single photon emission computed tomography (SPECT), and positron emission tomography (PET). This review reports on the most recent developments in imaging methods by analyzing examples of smart nanopolymers that can be imaged using one or more imaging techniques. Unique features, including nontoxicity, water solubility, biocompatibility, and the presence of multiple functional groups, designate polymeric nanocues as attractive nanomedicine candidates. In this context, we summarize various classes of multifunctional, polymeric, nano-sized formulations such as liposomes, micelles, nanogels, and dendrimers.

Carbon Dioxide and Nitrogen-Modulated Shape Transformation of Chitosan-Based Composite Nanogels

Chitosan/poly[N-(3-(dimethylamino)propyl)methacrylamide]/poly(acrylic acid) (CS/PDMAPMA/PAA) composite nanogels (CPACNGs) were fabricated in the solution of chitosan by surfactant-free emulsion polymerization. N-(3-(Dimethylamino)propyl)methacrylamide (DMAPMA) and acrylic acid (AA) were initiated by 2,2'-azobis-2-methyl-propanimidamide to graft from the backbone of chitosan. Nanogels were formed by noncovalent forces, including of hydrogen bonds, hydrophobic, and electrostatic interaction. Nanogels were characterized by transmission electron microscopy, scanning electron microscope dynamic light scattering, X-ray photoelectron spectroscopy, Fourier transform infrared spectrometer spectra, and 1H NMR. Spherical nanoparticles were observed in the latex system. Nanogels exhibited an excellent CO2 responsivity and CO2/N2 reversible response and switchability and had a faster response rate. The morphological shape transformation of nanogels was modulated by bubbling with CO2 and N2. The responsive mechanism was explored by determining the pH and electrical conductivity. In addition, nanogels were successfully emulsified by bubbling with CO2, and then a phase transition was achieved by bubbling with N2 in the organic solvent/water mixture.

Dual-responsive (pH/temperature) Pluronic F-127 hydrogel drug delivery system for textile-based transdermal therapy

A dual-responsive hydrogel (pH/temperature) was developed from a thermos-responsive polymer, pluronic F-127 (PF127), and pH-responsive polymers, N,N,N-trimethyl chitosan (TMC) and polyethylene glycolated hyaluronic acid (PEG-HA). Gallic acid, the principal component of the traditional Chinese drug Cortex Moutan was loaded into the hydrogel (PF127/TMC/PEG-HA) for possible application in textile-based transdermal therapy as Cortex Moutan has been proven to be an effective drug for the treatment of atopic dermatitis (AD). TMC and PEG-HA were synthesized, characterized (1H-NMR and FTIR), and added to the formulations to enhance drug release from the hydrogels, and increase the drug targeting of the carriers. The thermo-responsive properties of the hydrogel were assessed by dynamic viscosity analysis and the tube inversion method, and the pH-responsiveness of the formulation was determined by changing the pH of the external media. Rheology study of the hydrogels showed that complex viscosity and storage/loss moduli for PF127/TMC/PEG-HA hydrogel formulation are higher than PF127 hydrogel. The microstructure analysis by reflection SAXS indicated similar type of frozen inhomogeneity of hydrogel formulations. Various characterizations such as FTIR, SEM, TEM, zeta potential, and degradation of the hydrogel formulation indicated that the PF127/TMC/PEG-HA hydrogel showed better physico-chemical properties and morphology than did the PF127 hydrogel, and drug release was also higher for the PF127/TMC/PEG-HA hydrogel than for PF127. The drug release from hydrogels followed more closely first-order rate model than other rate models.

Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application

This review describes some commercially available stimuli-responsive polymers of natural and synthetic origin, and their applications in drug delivery and textiles. The polymers of natural origin such as chitosan, cellulose, albumin, and gelatin are found to show both thermo-responsive and pH-responsive properties and these features of the biopolymers impart sensitivity to act differently under different temperatures and pH conditions. The stimuli-responsive characters of these natural polymers have been discussed in the review, and their respective applications in drug delivery and textile especially for textile-based transdermal therapy have been emphasized. Some practically important thermo-responsive polymers such as pluronic F127 (PF127) and poly(N-isopropylacrylamide) (pNIPAAm) of synthetic origin have been discussed in the review and they are of great importance commercially because of their in situ gel formation capacity. Some pH-responsive synthetic polymers have been discussed depending on their surface charge, and their drug delivery and textile applications have been discussed in this review. The selected stimuli-responsive polymers of synthetic origin are commercially available. Above all, the applications of bio-based or synthetic stimuli-responsive polymers in textile-based transdermal therapy are given special regard apart from their general drug delivery applications. A special insight has been given for stimuli-responsive hydrogel drug delivery systems for textile-based transdermal therapy, which is critical for the treatment of skin disease atopic dermatitis.

Synthesis of Thermo-Responsive Block-Graft Copolymer Based on PCL and PEG Analogs, and Preparation of Hydrogel via Click Chemistry

Thermo-responsive cross-linkable mPEG-b-[PCL-g-(MEO2MA-co-OEGMA)]-b-mPEG was synthesized by ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP). Then, the cross-linkable block-graft copolymer was used to prepare hydrogel via a copper-catalyzed 1,3-dipolar azide-alkyne cycloaddition reaction. The chemical structure and composition of copolymer were characterized by proton nuclear magnetic resonance (1H NMR), Fourier-transform infrared (FT-IR) and gel permeation chromatography (GPC). The self-assembly behaviors of the copolymer in aqueous solution were studied by UV spectrophotometer, fluorescence probes, the surface tension method, dynamic light scattering, and transmission electron microscopy. The results proved that the copolymer has excellent solubility and better temperature response. The three-dimensional network structure of the gels, observed by scanning electron microscopy at different temperatures, indicated that the gels have temperature response.

Non-dye cell viability monitoring by using pH-responsive inverse opal hydrogels

Recent advances in the field of drug screening focus on accurate, rapid and high-throughput screening methods. In our work, hydrogel inverse opal photonic crystal microspheres (HPCMs) were fabricated through a templating method and exhibited a robust and reversible response to temperature and pH. The response performance was tested under various temperature (25-55 °C) and pH (1.5-7.5) conditions and the reflective peak shifted noticeably within the visible wavelength range. Furthermore, HPCMs were used as drug delivery carriers and not only displayed high doxorubicin (DOX) drug loading but also presented thermo/pH-induced drug release properties. More importantly, these carriers were shown to be good reporters for monitoring cell viability due to their tunable colour variation. This capability was applied to H460 cell cultures with or without DOX. The structure colour of HPCMs varied in different cell culture microenvironments, and cell apoptosis was able to be distinguished. In this way, this fast, non-dyeing method for reporting cell viability in tumour cytotoxicity assays has potential in the field of drug screening and may give new insights into the use of structural colour to report results in drug screening systems.

Thermoresponsive double network cryogels from dendronized copolymers showing tunable encapsulation and release of proteins

Thermoresponsive double network cryogels were prepared from OEG-based dendronized copolymers with PVA, which can reversibly capture and release proteins.

Photodegradable hydrogels for external manipulation of cellular microenvironments with real-time monitoring

A designed hydrogel whose stiffness could not only be controlled but also monitored in situ by fluorescence.

Facile fabrication of a magnetic self-healing poly(vinyl alcohol) composite hydrogel

This study proposes a simple method to fabricate a magnetic self-healing poly(vinyl alcohol) (ms-PVA) composite hydrogel.