Simultaneous determination of triazine herbicides and their metabolites in shellfish by HPLC-MS/MS combined with Q/E-Orbitrap HRMS

Triazine herbicides are used extensively in agriculture and aquaculture worldwide because of their broad effectiveness in weed control. However, after they are discharged into the sea, they seriously contaminate aquatic ecosystems and threaten aquatic organisms, especially shellfish. Currently, there are no established methods for the detection and confirmation of triazine herbicides and their metabolites in biological matrixes. Hence, the food safety of aquatic products cannot be accurately evaluated, which creates a technical barrier against international aquatic product trade. In this study, for the first time, a method was developed for the analysis and confirmation of seven triazine herbicides and 13 metabolites in shellfish, based on alkaline acetonitrile extraction and neutral Al₂O₃ cartridge purification coupled with internal standard calibration. Specifically, quantitative and qualitative analysis was conducted using high-performance liquid chromatography-triple quadrupole mass spectrometry (HPLC-MS/MS), and accurate identification was carried out by quadrupole orbitrap high-resolution mass spectrometry (Q/E Orbitrap HRMS). The results showed that target analytes demonstrated good linearity within the corresponding range (R² > 0.995). The limit of detection and limit of quantitation of the proposed method were 0.1 and 0.3 μg/kg, respectively. The average recoveries of analytes were between 70.0% and 120% when spiked at three levels with blank oyster (Crassostrea gigas) as the matrix, and the relative standard deviations (RSDs) were all less than 12% (n=6). The proposed method was successfully applied for the detection of triazine herbicide residues in oyster samples during actual breeding, and the presence of DIP, HP, DEHA, and other metabolites in positive samples was confirmed by Q/E Orbitrap HRMS. This method exhibits high accuracy, high sensitivity, and good reproducibility. It has promising application prospects in the field of hazard analysis and the positive identification of aquatic products.

Occurrence of environmental contaminants (pesticides, herbicides, PAHs) in Australian/Queensland Apis mellifera honey

Honey is a popular agricultural product containing mostly sugars and water, but due to its nutritious components and natural production by honeybees (Apis mellifera) from floral nectar, it is marketed as a premium health food item. As environmental monitors, honeybees can potentially transfer environmental contaminants to honey. Whilst pesticides can have ubiquitous presence in agricultural and urban areas, polycyclic aromatic hydrocarbons (PAHs) can be more prevalent in higher density urban/industrial environments. Australian beehives are customarily located in rural areas/forests, but it is increasingly popular to keep hives in urban areas. This study assessed the levels of environmental contaminants in honeys (n = 212) from Queensland/Australian sources including rural, peri-urban and urban areas. Honey samples were analysed by LC-MS/MS and GC-MS/MS for 53 herbicides, 83 pesticides, 18 breakdown products (for certain pesticides/herbicides) and 33 PAHs and showed low/negligible pesticide, herbicide and PAHs contamination, consistent regardless of honey origins.

Determination of eight endocrine disruptor pesticides in bovine milk at trace levels by dispersive liquid-liquid microextraction followed by GC-MS determination

Endocrine disrupting chemicals are chemicals that interfere with any aspect of the endocrine system. Several natural and synthetic chemicals, including pesticides, have been identified as endocrine disruptors, which potentially inhibit the reproductive activity of the hormonal system. The pervasive occurrence with trace level concentrations and extensive variety are the reported characteristics of these chemicals. In this study, a dispersive liquid-liquid microextraction method coupled with gas chromatography and mass spectrometry for the determination of eight potential endocrine disruptor pesticides (Lindane, Diazinon, Fenitrothion, Malathion, Aldrin, α-Endosulfan, β-Endosulfan, Methoxychlor) in bovine milk samples was developed. Several parameters that can influence the extraction efficiency were studied. Under optimized conditions, the calibration curves of all eight analytes presented coefficient of determination higher than 0.998 (range level of 2.0-1000 ng/mL). The limits of detection and quantification ranged from 0.90 to 5.00 ng/mL and 2.50 to 15.0 ng/mL, respectively.

Improved photocatalyst: Elimination of triazine herbicides by novel phosphorus and boron co-doping graphite carbon nitride

A non-metallic and low-cost novel phosphorus and boron co-doping graphite carbon nitride (PB-g-C₃N₄) photocatalyst was prepared by a facile thermal copolymerization of urea with B₂O₃ and (NH₄)₂·HPO₄. The novel PB-g-C₃N₄ exhibited excellent optical and electrical properties and the photocatalytic elimination efficiency for atrazine (AT, can make feminization of male frogs in the wild, and even induce reproductive cancers in humans.) has been greatly improved compared with the pristine g-C₃N₄. The results of characterization techniques indicate that the introduced B and P atoms most probably to substitute for sp²-hybridized C atoms in triazine rings. O₂^- and h⁺ are the dominant active species to induce the elimination of AT demonstrated by the radical-trapping experiments. And a possible elimination pathway is proposed according to the detected main intermediates. In addition, PB-g-C₃N₄ was applied to the simultaneous photocatalytic elimination of 9 triazine herbicides, and the effects of different initial concentrations, pH, fulvic acid (FA) and ion species on their elimination effects were studied. And it was proved that the photocatalytic performance of PB-g-C₃N₄ did not significant decrease after 4 times of reuse.

Recent advances and applications of molecularly imprinted polymers in solid-phase extraction for real sample analysis

Sample pretreatment is essential for the analysis of complicated real samples due to their complex matrices and low analyte concentrations. Among all sample pretreatment methods, solid-phase extraction is arguably the most frequently used one. However, the majority of available solid-phase extraction adsorbents suffer from limited selectivity. Molecularly imprinted polymers are a type of tailor-made artificial antibodies and receptors with specific recognition sites for target molecules. Using molecularly imprinted polymers instead of conventional adsorbents can greatly improve the selectivity of solid-phase extraction, and therefore molecularly imprinted polymer-based solid-phase extraction has been widely applied to separation, clean up and/or preconcentration of target analytes in various kinds of real samples. In this article, after a brief introduction, the recent developments and applications of molecularly imprinted polymer-based solid-phase extraction for determination of different analytes in complicated real samples during the 2015-2020 are reviewed systematically, including the solid-phase extraction modes, molecularly imprinted adsorbent types and their preparations, and the practical applications of solid-phase extraction to various real samples (environmental, food, biological, and pharmaceutical samples). Finally, the challenges and opportunities of using molecularly imprinted polymer-based solid-phase extraction for real sample analysis are discussed.

Sensitive and Simultaneous Determination of Hydroquinone and Catechol in Water Using an Anodized Glassy Carbon Electrode with Polymerized 2-(Phenylazo) Chromotropic Acid

Hydroquinone (HQ) and catechol (CT) are considered as environmental pollutants with high toxicity. We have developed a simple electrochemical sensor using an anodized glassy carbon electrode modified with a stable 2-(phenylazo) chromotropic acid- (CH-) conducting polymer (PCH/AGCE). The PCH/AGCE sensor showed good electrocatalytic activity and reversibility towards the redox of HQ and CT in phosphate buffer solution (PBS, pH 7.0). The cyclic voltammetry (CV) in mixed solution of HQ and CT showed that the oxidation peaks of them became well resolved with a peak separation of 0.1 V. The detection limits of HQ and CT were 0.044 and 0.066 μM, respectively, in a wide linear response range of 1–300 μM for both. Moreover, the sensor displayed an excellent selectivity in the presence of common interferences. This study provided a simple, sensitive, and high recovery method for simultaneous and quantitative determination of HQ and CT in aqueous medium.

Development of a liquid-phase microextraction based on the freezing of a deep eutectic solvent followed by HPLC-UV for sensitive determination of common pesticides in environmental water samples

In this research, a new extraction method based on liquid-phase microextraction and the freezing of deep eutectic solvent has been developed for the determination of pesticides in water prior to their analysis by HPLC-UV.