Renewable lignin-derived heteroatom-doped porous carbon nanosheets as an efficient oxygen reduction catalyst for rechargeable zinc-air batteries

Lignin upgrading to various functional products is promising to realize high-value utilization of low-cost and renewable biomass waste, but is still in its infancy. Herein, using industry waste lignosulfonate as the biomass-based carbon source and urea as the dopant, we constructed a heteroatom-doped porous carbon nanosheet structure by a simple NaCl template-assisted pyrolytic strategy. Through the synergistic effect of the NaCl template and urea, the optimized lignin-derived porous carbon catalyst with high content of active nitrogen species and large specific surface area can be obtained. As a result, the fabricated catalysts exhibited excellent electrocatalytic oxygen reduction activity, as well as good methanol tolerance and stability, comparable to that of commercial Pt/C. Moreover, rechargeable Zn-air batteries assembled with this electrocatalyst have a peak power density of up to 150 mW cm-2 and prominent long-term cycling stability. This study offers an inexpensive and efficient way for the massive production of highly active metal-free catalysts from the plentiful, inexpensive and environmentally friendly lignin, offering a good direction for biomass waste recycling and utilization.

Enzymolytic Lignin-Derived N-S Codoped Porous Carbon Nanocomposites as Electrocatalysts for Oxygen Reduction Reactions

Currently, the development of nonmetallic oxygen reduction reaction (ORR) catalysts based on heteroatomic-doped carbon materials is receiving increaseing attention in the field of fuel cells. Here, we used enzymolytic lignin (EL), melamine, and thiourea as carbon, nitrogen, and sulfur sources and NH4Cl as an activator to prepare N- and S-codoped lignin-based polyporous carbon (ELC) by one-step pyrolysis. The prepared lignin-derived biocarbon material (ELC-1-900) possessed a high specific surface area (844 m2 g-1), abundant mesoporous structure, and a large pore volume (0.587 cm3 g-1). The XPS results showed that ELC-1-900 was successfully doped with N and S. ELC-1-900 exhibited extremely high activity and stability in alkaline media for the ORR, with a half-wave potential (E1/2 = 0.88 V) and starting potential (Eonset = 0.98 V) superior to those of Pt/C catalysts and most non-noble-metal catalysts reported in recent studies. In addition, ELC-1-900 showed better ORR stability and methanol tolerance in alkaline media than commercial Pt/C catalysts.

N-Rich and Sulfur-Doped Nano Hollow Carbons with High Oxidase-like Activity Prepared Using a Green Template of CaCO3 for Bacteriostasis

Nanozymes, enzyme-mimicking nanomaterials, have attracted increasing attention due to their low cost, high stability, and catalytic ability compared with natural enzymes. However, the catalytic efficiency of the nanozymes is still relatively low, and catalytic reaction mechanisms remain unclear. To address these issues, herein we prepared nitrogen-riched and sulfur-codoped nano hollow carbons (N/S-HCS) using a green and useful template of CaCO3. N/S-HCS exhibits enhanced oxidase-like activity and catalytic kinetic performance. It could directly oxidize the colorless 3,3',5,5'-tetramethylbenzidine (TMB) to the heavy blue colored ox-TMB without H2O2. The maximum reaction rate (Vmax) is 186.7 × 10-8 M·s-1, and Michaelis-Menten constant (Km) is 0.162 mM. DFT results show that N and S codoping could work synergistically to provide more active sites, resulting in the superior ability to adsorb oxygen and enhanced catalytic activity. Meantime, we develop a multispectral characterization strategy to unravel catalytic reaction mechanisms about N/S-HCS. It successfully induces the generation of superoxide (•O2-) and hydroxyl (•OH) during the colorimetric reaction which are the key intermediate products of the catalytic reaction. Furthermore, N/S-HCS increased the cellular reactive oxygen species level significantly and induced bacteriostasis to more than 95% of Escherichia coli.

Impact of Different Lignin Sources on Nitrogen-Doped Porous Carbon toward the Electrocatalytic Oxygen Reduction Reaction

Lignin is an ideal carbon source material, and lignin-based carbon materials have been widely used in electrochemical energy storage, catalysis, and other fields. To investigate the effects of different lignin sources on the performance of electrocatalytic oxygen reduction, different lignin-based nitrogen-doped porous carbon catalysts were prepared using enzymolytic lignin (EL), alkaline lignin (AL) and dealkaline lignin (DL) as carbon sources and melamine as a nitrogen source. The surface functional groups and thermal degradation properties of the three lignin samples were characterized, and the specific surface area, pore distribution, crystal structure, defect degree, N content, and configuration of the prepared carbon-based catalysts were also analyzed. The electrocatalytic results showed that the electrocatalytic oxygen reduction performance of the three lignin-based carbon catalysts was different, and the catalytic performance of N-DLC was poor, while the electrocatalytic performance of N-ELC was similar to that of N-ALC, both of which were excellent. The half-wave potential (E_1/2) of N-ELC was 0.82 V, reaching more than 95% of the catalytic performance of commercial Pt/C (E_1/2 = 0.86 V) and proving that EL can be used as an excellent carbon-based electrocatalyst material, similar to AL.

Wood and Black Liquor-Based N-Doped Activated Carbon for Energy Application

Fuel cells, batteries and supercapacitors are critical to meet the rising global demand for clean, sustainable energy. Biomass-derived activated carbon can be obtained with tailored properties to fulfil the extensive need for low-cost, high-performance, catalyst and electrode materials. To investigate the possibility of nanoporous nitrogen-doped carbon materials as catalysts in fuel cells and electrodes in lithium-ion batteries, biomass precursors were thermochemically activated with NaOH at 800 °C, nitrogen was introduced using dicyandiamide and doping was performed at 800 °C. The chemical composition, porous structure, texture and electrochemical properties of the obtained materials change depending on the biomass precursor used. It has been found that the most promising precursor of the obtained materials is wood char, both as an oxygen reduction catalyst in fuel cells, which shows better properties than the commercial 20% Pt/C catalyst, and as an anode material in Li-ion batteries. However, catalysts based on black liquor and hybrid material have comparable properties with commercial 20% Pt/C catalyst and can be considered as a cheaper alternative.

On the Origin of the Effect of pH in Oxygen Reduction Reaction for Nondoped and Edge-Type Quaternary N-Doped Metal-Free Carbon-Based Catalysts

Metal-free carbon-based catalysts have gained much attention during the last 15 years as an alternative toward the replacement of platinum-based catalysts for the oxygen reduction reaction (ORR). However, carbon-based catalysts only show promising catalytic activity in alkaline solution. Concurrently, the most optimized polymer electrolyte membrane fuel cells use proton exchange membranes. This means that the cathode electrode is surrounded by a protonic environment in which carbon materials show poor performance, with differences above 0.5 V in E_ONSET for nondoped carbon materials. Therefore, the search for highly active carbon-based catalysts is only possible if we first understand the origin of the poor electrocatalytic activity of this kind of catalysts in acidic conditions. We address this matter through a combined experimental and modeling study, which yields fundamental principles on the origin of the pH effects in ORR for carbon-based materials. This is relevant for the design of pH-independent metal-free carbon-based catalysts.

"Waste to Wealth": Lignin as a Renewable Building Block for Energy Harvesting/Storage and Environmental Remediation

Lignin is the second most earth-abundant biopolymer having aromatic unit structures, but it has received less attention than other natural biomaterials. Recent advances in the development of lignin-based materials, such as mesoporous carbon, flexible thin films, and fiber matrix, have found their way into applications to photovoltaic devices, energy-storage systems, mechanical energy harvesters, and catalytic components. In this Review, we summarize and suggest another dimension of lignin valorization as a building block for the synthesis of functional materials in the fields of energy and environmental applications. We cover lignin-based materials in the photovoltaic and artificial photosynthesis for solar energy conversion applications. The most recent technological evolution in lignin-based triboelectric nanogenerators is summarized from its fundamental properties to practical implementations. Lignin-derived catalysts for solar-to-heat conversion and oxygen reduction are discussed. For energy-storage applications, we describe the utilization of lignin-based materials in lithium-ion rechargeable batteries and supercapacitors (e.g., electrodes, binders, and separators). We also summarize the use of lignin-based materials as heavy-metal adsorbents for environmental remediation. This Review paves the way to future potentials and opportunities of lignin as a renewable material for energy and environmental applications.

Marine Algae-Derived Porous Carbons as Robust Electrocatalysts for ORR

Large quantities of marine algae are annually produced, and have been disposed or burned as solid waste. In this work, porous carbons were prepared from three kinds of marine algae (Enteromorpha, Laminaria, and Chlorella) by a two-step activation process. The as-prepared carbon materials were doped with cobalt (Co) and applied as catalysts for oxygen reduction reaction (ORR). Our results demonstrated that Co-doped porous carbon prepared from Enteromorpha sp. (denoted by Co-PKEC) displayed excellent catalytic performance for ORR. Co-PKEC obtained a half-wave potential of 0.810 V (vs. RHE) and a maximum current density of 4.41 mA/cm2, which was comparable to the commercial 10% Pt/C catalyst (E1/2 = 0.815 V, Jd = 4.40 mA/cm2). In addition, Co-PKEC had excellent long-term stability and methanol resistance. The catalytic ability of Co-PKEC was evaluated in a one-chamber glucose fuel cell. The maximum power density of the fuel cell equipped with the Co-PKEC cathode was 33.53 W/m2 under ambient conditions, which was higher than that of the fuel cell with a 10% Pt/C cathode. This study not only demonstrated an easy-to-implement approach to prepare robust electrochemical catalyst from marine algal biomass, but also provided an innovative strategy for simultaneous waste remediation and value-added material production.

Advanced Biomass-Derived Electrocatalysts for the Oxygen Reduction Reaction

Recent progress in advanced nanostructures synthesized from biomass resources for the oxygen reduction reaction (ORR) is reviewed. The ORR plays a significant role in the performance of numerous energy-conversion devices, including low-temperature hydrogen and alcohol fuel cells, microbial fuel cells, as well as metal-air batteries. The viability of such fuel cells is strongly related to the cost of the electrodes, especially the cathodic ORR electrocatalyst. Hence, inexpensive and abundant plant and animal biomass have become attractive options to obtain electrocatalysts upon conversion into active carbon. Bioresource selection and processing criteria are discussed in light of their influence on the physicochemical properties of the ORR nanostructures. The resulting electrocatalytic activity and durability are introduced and compared to those from conventional Pt/C-based electrocatalysts. These ORR catalysts are also active for oxygen or hydrogen evolution reactions.

Core@shell structured Co–CoO@NC nanoparticles supported on nitrogen doped carbon with high catalytic activity for oxygen reduction reaction

A composite with a hierarchical structure consisting of nitrogen doped carbon nanosheets with the deposition of nitrogen doped carbon coated Co–CoO nanoparticles (Co–CoO@NC/NC) has been synthesized by a simple procedure involving the drying of the reaction mixture containing Co(NO₃)₂, glucose, and urea and its subsequent calcination. The drying step is found to be necessary to obtain a sample with small and uniformly sized Co–CoO nanoparticles. The calcination temperature has a great effect on the catalytic activity of the final product. Specifically, the sample prepared at the calcination temperature of 800 °C shows better catalytic activity of the oxygen reduction reaction (ORR). Urea in the reaction mixture is crucial to obtain the sample with the uniformly sized Co–CoO nanoparticles and also plays an important role in improving the catalytic activity of the Co–CoO@NC/NC. Additionally, there exists a strong electronic interaction between the Co–CoO nanoparticles and the NC. Most interestingly, the Co–CoO@NC/NC is highly efficient for the ORR and can deliver an ORR onset potential of 0.961 V vs. RHE and a half-wave potential of 0.868 V vs. RHE. Both the onset and half-wave potentials are higher than those of most catalysts reported previously and even close to those of the commercial Pt/C (the ORR onset and half-wave potential of the Pt/C are 0.962 and 0.861 V vs. RHE, respectively). This, together with its high stability, strongly suggests that the Co–CoO@NC/NC could be used as an efficient catalyst for the ORR.

A simple method has been developed for the synthesis of Co–CoO@NC/NC, which exhibits high and stable performance for the ORR.

Prevention of active-site destruction during the synthesis of high performance non-Pt cathode catalyst for fuel cells

Active-site destruction caused by CO₂ attack and thermal decomposition leads to catalyst deterioration toward oxygen reduction reaction.