Bioinspired Low-Angle-Dependent Photonic Crystal Elastomer for Highly Sensitive Visual Strain Sensor

Photonic crystals (PCs) possess unique photonic band gap properties that can be used in the field of sensors and smart displays if modulated on the micronano structure. Both nonclose-packed (NCP) structure and high refractive index (RI) contrast of PC play important roles in response sensitivity during stretching. Herein, we constructed an NCP-structured PC strain sensor with high RI by a novel coating-etching strategy. Stretch-induced changes in structural color correspond to the strength of the force, enabling the detection of the strength of the acting force by the naked eye. The flexible 3D cross-linked network constructed by poly(ethylene glycol) phenyl ether acrylate and pentaerythritol tetrakis(3-mercaptopropionate) endows the sensor with excellent elasticity and robustness. The designed PC strain sensor achieves high mechanochromic sensitivity (∼8.3 nm/%, 0.02 to 4.21 MPa) and a substantial reflection peak shift (Δλ = 249 nm). More importantly, the high RI contrast (Δn = 0.43) between CdS and polymers imparts isotropic optical properties, ensuring a broad viewing angle while avoiding misleading signals. The research provides a novel fabrication strategy to construct sensitive PC strain sensors, expanding the prospective applicability to human movement monitoring and secure message encryption.

Structural Colored Fabric Based on Monodisperse Cu2O Microspheres

Structural-colored fabrics have been attracting much attention due to their eco-friendliness, dyelessness, and anti-fading properties. Monodisperse microspheres of metal, metal oxide, and semiconductors are promising materials for creating photonic crystals and structural colors owing to their high refractive indices. Herein, Cu2O microspheres were prepared by a two-step reduction method at room temperature; the size of Cu2O microspheres was controlled by changing the molar ratio of citrate to Cu2+; and the size of Cu2O microspheres was tuned from 275 nm to 190 nm. The Cu2O microsphere dispersions were prepared with the monodispersity of Cu2O microspheres. Furthermore, the effect of the concentration of Cu2O microsphere and poly(butyl acrylate) on the structural color was also evaluated. Finally, the stability of the structural color against friction and bending was also tested. The results demonstrated that the different structural colors of fabrics were achieved by adjusting the size of the Cu2O microsphere, and the color fastness of the structural color was improved by using poly(butyl acrylate) as the adhesive.

Iridescence Mimicking in Fabrics: A Ultraviolet/Visible Spectroscopy Study

Poly(styrene-methyl methacrylate-acrylic acid) photonic crystals (PCs), with five different sizes (170, 190, 210, 230 and 250 nm), were applied onto three plain fabrics, namely polyamide, polyester and cotton. The PC-coated fabrics were analyzed using scanning electronic microscopy and two UV/Vis reflectance spectrophotometric techniques (integrating sphere and scatterometry) to evaluate the PCs' self-assembly along with the obtained spectral and colors characteristics. Results showed that surface roughness of the fabrics had a major influence on the color produced by PCs. Polyamide-coated fabrics were the only samples having an iridescent effect, producing more vivid and brilliant colors than polyester and cotton samples. It was observed that as the angle of incident light increases, a hypsochromic shift in the reflection peak occurs along with the formation of new reflection peaks. Furthermore, color behavior simulations were performed with an illuminant A light source on polyamide samples. The illuminant A simulation showed greener and yellower structural colors than those illuminated with D50. The polyester and cotton samples were analyzed using scatterometry to check for iridescence, which was unseen upon ocular inspection and then proven to be present in these samples. This work allowed a better comprehension of how structural colors and their iridescence are affected by the textile substrate morphology and fiber type.

Bionic Structural Coloration of Textiles Using the Synthetically Prepared Liquid Photonic Crystals

The structural coloration of textiles with bionic photonic crystals (PCs) is expected to become a critical approach to the ecological coloration of textiles. Rapid and large-area preparation of PC structurally colored textiles can be achieved via self-assembly of high mass fractions of liquid photonic crystals (LPCs). However, the rapid and large-scale manufacturing of LPCs remains a challenge. In this work, the pH regulator is added in the process of emulsion polymerization to solve the problem of phase transformation caused by the thermal decomposition of the initiator to produce H+ , directly achieving 40 wt.% PS nanospheres in the dispersion. Then oligomers and small-molecule salts are removed from the system via dialysis, and the pre-crystallized LPC system is efficiently prepared. Adjusting the particle size and the mass fraction of nanospheres is shown to be an efficient way to control the optical properties of LPCs. The rapid and large-area preparation of PC structural color fabric and the patterned PC structural color fabric with an iridescent effect is implemented by using LPCs as the assembly intermediate. By constructing the encapsulation layer on the surface of the PC structural color fabric, the consistency of high structural stability and high color saturation of the PC is realized.

Effect of Fabric Substrate and Introduction of Silk Fibroin on the Structural Color of Photonic Crystals

Monodispersed polystyrene (PS) particles were prepared and deposited onto various kinds of textile fabrics using a gravity sedimentation method. The monodispersed PS particles were self-assembled on fabrics to form a photonic crystal, which has an iridescent structural color. The structural color of fabrics was determined by the bandgaps of photonic crystals. Moreover, the effect of the fabric substrate, including the raw materials, base color, and fabric weave, etc., on the structural color of the photonic crystals was studied. Scanning electron microscopy and UV-vis spectrometry were adopted to characterize the structure and optical performance of photonic crystals. The results indicate that the silk fabric with a black base color and satin weave contribute to a bright and pure textile structural color. In order to solve the problem of low color fastness of the structural color on the fabric surface, silk fibroin (SF) was introduced to the PS microsphere solution. Results show that the addition of SF slightly affects the brightness of the structural color, while it has a certain reinforcing effect on the structural color fastness to rubbing and washing.

Study on hydraulic spray atomizing system as a new resource-efficient dyeing-finishing method for wool fabric

This study introduces hydraulic spray (HS) atomizing system as new resource-efficient continuous dyeing-finishing method for wool fabric. Here, wool fabric was dyed and finished by using commercial dyes and finishes through either one-step or two-steps HS method. Results obtained from color strength (K/S), color difference (ΔE_CMC) and color fastness analysis presented the apprehension of HS method in dyeing of wool fabric with different GSM and dyes. Finishing performance of wool fabric was measured through water contact angle analysis. Analysis shows that, the finishing performance of HS method were substantial to reach water contact angle as high as 145° while maintaining high fastness to wash and abrasion. Between one-step and two-steps HS method, one-step method showed better performance with high resource efficiency compared to two-steps method. Results from statistical analysis shows no statistical significance of fabric weight, type of dyes, and finishes to the performance of new HS method which is crucial for true-scale industrial implementation and scaling up of this process. The findings of this report are of great importance as it presents a greener alternative to the conventional resource-intensive dyeing-finishing methods of wool fabric.

Bioinspired Colloidal Photonic Composites: Fabrications and Emerging Applications

Organisms in nature have evolved unique structural colors and stimuli-responsive functions for camouflage, warning, and communication over millions of years, which are essential to their survival in harsh conditions. Inspired by these characteristics, colloidal photonic composites (CPCs) composed of colloidal photonic crystals embedded in the polymeric matrix are artificially prepared and show great promise in applications. This review focuses on the summary of building blocks, i.e., colloidal particles and polymeric matrices, and constructive strategies from the perspective of designing CPCs with robust performance and specific functionality. Furthermore, their state-of-the-art applications are also discussed, including colorful coatings, anti-counterfeiting, and regulation of photoluminescence, especially in the field of visualized sensing. Finally, current challenges and potential for future developments in this field are discussed. The purpose of this review is not only to clarify the design principle for artificial CPCs but also to serve as a roadmap for the exploration of next-generation photonic materials.

Structural Colored Fabrics with Brilliant Colors, Low Angle Dependence, and High Color Fastness Based on the Mie Scattering of Cu2O Spheres

Compared with conventional textile coloring with dyes and pigments, structural colored fabrics have attracted broad attention due to the advantages of eco-friendliness, brilliant colors, and anti-fading properties. The most investigated structural color on fabrics is originated from a band gap of multilayered photonic crystals or amorphous photonic structures. However, limited by the nature of the color generation mechanism and a multilayered structure, it is challenging to achieve structural colored fabrics with brilliant noniridescent colors and high fastness. Here, we propose an alternative strategy for coloring a fabric based on the scattering of Cu₂O single-crystal spheres. The disordered Cu₂O thin layers (<0.6 μm) on the surface of fabrics were prepared by a spraying method, which can generate vivid noniridescent structural color due to the strong Mie scattering of Cu₂O single-crystal spheres. Importantly, the great mechanical stability of the structural color was realized by firmly binding Cu₂O spheres to the fabric using a commercial binder. The structural color can be tuned by changing the diameter of Cu₂O spheres. Furthermore, complex patterns can be easily obtained by spray coating Cu₂O spheres with different particle sizes using a mask. According to color fastness test standards, the dry rubbing, wet rubbing, and light fastness of the structural color on fabric can reach level 5, level 4, and level 6, respectively, which is sufficient to resist rubbing, photobleaching, washing, rinsing, kneading, stretching, and other external mechanical forces. This coloring method may carve a practical avenue in textile coloring and has potentials in other practical applications of structural color.

Structural Coloration of Polyester Fabrics with High Colorfastness by Copolymer Photonic Crystals Containing Reactive Epoxy Groups

Structural color as a revolutionary coloration strategy has been proposed to replace the traditional dyeing and printing process. However, the poor colorfastness and easy crack formation of structural colors on textile fabrics restrict their practical application at present. In this study, poly (tert-butyl acrylate-co-glycidyl methacrylate) (P(t-BA-co-GMA)) copolymers containing reactive epoxy groups with different mass ratios of tert-butyl acrylate (t-BA) and glycidyl methacrylate (GMA) were successfully synthesized, which were used to create structural colors on black polyester fabrics. The results showed that P(t-BA-co-GMA) nanospheres could form crack-free structural colors on polyester fabrics, and the colors vary with the mass ratio of t-BA and GMA to obtain five different colors. The different particle sizes of the different P(t-BA-co-GMA) nanospheres with different refractive indexes and the arrangement of short-range ordered and long-range disordered in microstructures may be the reason of different angle-independent structural colors on polyester fabrics. The P(t-BA-co-GMA) nanosphere structural colors on polyester fabrics possess good abrasion and washing colorfastness. This research provides the experimental basis for the development of crack-free amorphous photonic crystal structural color on fabrics with high colorfastness to promote the practical application of structural color in textile coloration.

Production of photochromic nanocomposite film via spray-coating of rare-earth strontium aluminate for anti-counterfeit applications

New photochromic film was developed toward the preparation of anti-counterfeiting documents utilizing inorganic/organic nanocomposite enclosing a photoluminescent inorganic pigment and a polyacrylic binder polymer. To generate a translucent film from pigment/polyacrylic nanocomposite, the phosphorescent strontium aluminum oxide pigment should be well-dispersed in the solution of the polyacrylic-based binder without agglomeration. The photochromic nanocomposite was applied efficiently onto commercial cellulose paper documents utilizing the effective and economical spray-coating technology followed with thermofixation. A homogeneous photochromic film was immobilized onto cellulose paper surface to introduce a transparent film changing to greenish-yellow upon exposure to ultraviolet light as depicted by CIE coloration measurements. The photochromic effect was monitored at lowest pigment concentration (0.25 wt%). The spray-coated paper documents exhibit two absorbance bands at 256 and 358 nm, and two fluorescence peaks at 433 and 511 nm. The morphologies of the spray-coated documents were explored. The spray-coated paper sheets showed a reversible photochromic effect without fatigue under ultraviolet irradiation. The rheology of the produced photochromic composites as well as the mechanical properties and photostability of the spray-coated documents were studied.

Biomass-based superhydrophobic coating with tunable colors and excellent robustness

Multicolored superhydrophobic coating with high durability has been receiving tremendous attention in decorative applications. Herein, a facile method to fabricate multicolored superhydrophobic coating with excellent robustness has been developed by using cellulose and chitosan. The multicolored coatings can be obtained through single dyeing or mixed dyeing based on three primary dyes. The coating can be applied on hard substrates (e.g. glass, aluminum sheet) and soft substrates (e.g. cotton fabric) by diverse methods including spraying, dip-coating and painting. The colorful coating firmly adheres to the substrates due to the multiple interactions (siloxane covalent bonds and hydrogen bonds). The colorful coating exhibits water-repellant behaviors and can withstand sandpaper abrasion, tape-peeling cycles, water impact, salt spray test and UV environments. Furthermore, the multicolored coating can be used as a new type of pigment for painting on different substrates and is expected to have a huge potential application in technological design or decoration.

Coating Cellulosic Material with Ag Nanowires to Fabricate Wearable IR-Reflective Device for Personal Thermal Management: The Role of Coating Method and Loading Level

Textiles coated with silver nanowires (AgNWs) are effective at suppressing radiative heat loss without sacrificing breathability. Many reports present the applicability of AgNWs as IR-reflective wearable textiles, where such studies partially evaluate the parameters for practical usage for large-scale production. In this study, the effect of the two industrial coating methods and the loading value of AgNWs on the performance of AgNWs-coated fabric (AgNWs-CF) is reported. The AgNWs were synthesized by the polyol process and applied onto the surface of cotton fabric using either dip- or spray-coating methods with variable loading levels of AgNWs. X-ray diffraction, scanning electron microscopy (SEM), infrared (IR) reflectance, water vapor permeability (WVP), and electrical resistance properties were characterized. The results report the successful synthesis of AgNWs with a 30 μm length. The results also show that the spray coating method has a better performance for reflecting the IR radiation to the body, which increases with a greater loading level of the AgNWs. The antibacterial results show a good inhibition zone for cotton fabric coated by both methods, where the spray-coated fabric has a better performance overall. The results also show the coated fabric with AgNWs maintains the level of fabric breathability similar to control samples. AgNWs-CFs have potential utility for cold weather protective clothing in which heat dissipation is attenuated, along with applications such as wound dressing materials that provide antibacterial protection.

Photonics in nature and bioinspired designs: sustainable approaches for a colourful world

Biological systems possess nanoarchitectures that have evolved for specific purposes and whose ability to modulate the flow of light creates an extraordinary diversity of natural photonic structures. In particular, the striking beauty of the structural colouration observed in nature has inspired technological innovation in many fields. Intense research has been devoted to mimicking the unique vivid colours with newly designed photonic structures presenting stimuli-responsive properties, with remarkable applications in health care, safety and security. This review highlights bioinspired photonic approaches in this context, starting by presenting many appealing examples of structural colours in nature, followed by describing the versatility of fabrication methods and designed coloured structures. A particular focus is given to optical sensing for medical diagnosis, food control and environmental monitoring, which has experienced a significant growth, especially considering the advances in obtaining inexpensive miniaturized systems, more reliability, fast responses, and the use of label-free layouts. Additionally, naturally derived biomaterials and synthetic polymers are versatile and fit many different structural designs that are underlined. Progress in bioinspired photonic polymers and their integration in novel devices is discussed since recent developments have emerged to lift the expectations of smart, flexible, wearable and portable sensors. The discussion is expanded to give emphasis on additional functionalities offered to related biomedical applications and the use of structural colours in new sustainable strategies that could meet the needs of technological development.

Three-Dimensional Photonic Crystal Bulks with Outstanding Mechanical Performance Assembled by Thermoforming-Etching Cross-linked Polymer Microspheres

Traditional self-assembly methods for photonic crystals (PCs) limited by poor mechanical performance and microstructure defects make it hard to be directly applied to optical devices, whose performance strongly rely on mechanical performance and microstructure of PCs. Here, a thermoforming-etching strategy combining both traditional processing and nanofabrication is reported to develop cross-linked polystyrene microsphere-based PC bulks with outstanding mechanical performance. It illustrates scientific principles, where surface molecular chains of PS microspheres were activated and entangled with each other under thermoforming conditions (200 °C; 220 MPa), resulting in applicable mechanical strength (hardness and modulus reach 0.12 and 4.12 GPa, respectively). The optimum optical reflectivity of the PS microsphere-based (180 nm) PC bulk is 49.4% at 381 nm. Furthermore, these PC bulks have been successfully written in anti-counterfeiting and realized colorful pattern printing. The innovative method opens a new route for the rapid and simple fabrication of the nanoparticle structure which can be used as various functional devices and directly promotes the industrialization of bulk PC devices, such as optical and display devices, and so forth.

Fabrication of Structural-Coloured Carbon Fabrics by Thermal Assisted Gravity Sedimentation Method

Structural-coloured poly(styrene-methyl methacrylate-acrylic acid) (Poly(St-MMA-AA)) deposited carbon fabrics (Poly(St-MMA-AA)/PCFs) with fascinating colours (salmon, chartreuse, springgreen, skyblue, mediumpurple) changing with the (Poly(St-MMA-AA) nanoparticle sizes can be facilely fabricated by the thermal-assisted gravity sedimentation method that facilitates the self-assembly of Poly(St-MMA-AA) colloidal nanoparticles to generate photonic crystals. The particle sizes of Poly(St-MMA-AA) copolymer with core/shell structure varying from 308.3 nm to 213.1 nm were controlled by adjusting the amount of emulsifier during emulsion polymerisation. The presence of the intrinsic chemical information of Poly(St-MMA-AA) copolymer has been ascertained by Raman and Fourier Transform Infrared (FT-IR) Spectroscopy analysis. Colour variation of the as-prepared structural-coloured carbon fabrics (Poly(St-MMA-AA)/PCFs) before and after dipping treatment were captured while using an optical microscope. The structural colours of Poly(St-MMA-AA)/PCFs were assessed by calculating the diffraction bandgap according to Bragg's and Snell's laws. The Poly(St-MMA-AA) photonic crystal films altered the electrical properties of carbon fabrics with the resistivity growing by five orders of magnitude. The differential electrical resistivity between Poly(St-MMA-AA)/PCFs and wet Poly(St-MMA-AA)/PCFs combined with the corresponding tunable colours can be potentially applied in several promising areas, such as smart displays, especially signal warning displays for traffic safety.

Printing a Wide Gamut of Saturated Structural Colors Using Binary Mixtures, With Applications in Anticounterfeiting

Use of colloidal suspensions to generate structural colors has the potential to reduce the use of toxic metals or organic pigments in inkjet printing, coatings, cosmetics, and other applications, and is a promising avenue to create large-scale nanostructures that produce long-lasting colors. However, expanded use of structural colors requires a reduction in coffee-ring effects during printing, which currently requires intricately patterned substrates or high particle concentrations, and diversification of colors to compete with conventional printing inks. Here, we treat substrate surfaces with cold plasma to facilitate spontaneous assembly of particles into colloidal nanostructures, reducing the need for highly concentrated particle suspensions. Moreover, by employing binary mixtures, we can tune the lightness of the hue produced or change the hue itself, allowing us to cover wider regions of color space. We demonstrate the use of this cold-plasma approach on a variety of substrates, favoring substrate diversity on which printing can be performed. This methodology enables creation of high-resolution, complex designs and opens a path for extending the limits of anticounterfeiting applications by using binary mixtures.

Bioinspired structural color nanocomposites with healable capability

This minireview summarizes the recent development of healable structural color nanocomposites from the perspective of the construction strategies.

Durable Antimicrobial Behaviour from Silver-Graphene Coated Medical Textile Composites

Silver nanoparticle (AgNP) and AgNP/reduced graphene oxide (rGO) nanocomposite impregnated medical grade polyviscose textile pads were formed using a facile, surface-mediated wet chemical solution-dipping process, without further annealing. Surfaces were sequentially treated in situ with a sodium borohydride (NaBH4) reducing agent, prior to formation, deposition, and fixation of Ag nanostructures and/or rGO nanosheets throughout porous non-woven (i.e., randomly interwoven) fibrous scaffolds. There was no need for stabilising agent use. The surface morphology of the treated fabrics and the reaction mechanism were characterised by Fourier transform infrared (FTIR) spectra, ultraviolet-visible (UV-Vis) absorption spectra, X-ray diffraction (XRD), Raman spectroscopy, dynamic light scattering (DLS) energy-dispersive X-ray analysis (EDS), and scanning electron microscopic (SEM). XRD and EDS confirmed the presence of pure-phase metallic silver. Variation of reducing agent concentration allowed control over characteristic plasmon absorption of AgNP while SEM imaging, EDS, and DLS confirmed the presence of and dispersion of Ag particles, with smaller agglomerates existing with concurrent rGO use, which also coincided with enhanced AgNP loading. The composites demonstrated potent antimicrobial activity against the clinically relevant gram-negative Escherichia coli (a key causative bacterial agent of healthcare-associated infections; HAIs). The best antibacterial rate achieved for treated substrates was 100% with only a slight decrease (to 90.1%) after 12 equivalent laundering cycles of standard washing. Investigation of silver ion release behaviours through inductively coupled plasmon optical emission spectroscopy (ICP-OES) and laundering durability tests showed that AgNP adhesion was aided by the presence of the rGO host matrix allowing for robust immobilisation of silver nanostructures with relatively high stability, which offered a rapid, convenient, scalable route to conformal NP-decorated and nanocomposite soft matter coatings.

Environmentally benign non-wettable textile treatments: A review of recent state-of-the-art

Among superhydrophobic materials, non-wettable textiles are probably the ones that come in contact or interact with the human body most frequently. Hence, textile treatments for water or oil repellency should be non-toxic, biocompatible, and comply with stringent health standards. Moreover, considering the volume of the worldwide textile industry, these treatments should be scalable, sustainable, and eco-friendly. Due to this awareness, more and more non-wettable textile treatments with eco-friendly processes and green or non-toxic chemicals are being adopted and reported. Although fluorinated alkylsilanes or fluorinated polymers with C8 chemistry (with ≥ 8 fluorinated carbon atoms) are the best performing materials to render textiles water or oil repellent, they pose substantial health and environmental problems and are being banned. For this reason, water/solvent-borne, C8-free vehicles for non-wettable treatment formulations are probably the only ones that can have commercialization prospects. Hence, researchers have come up with a variety of new, non-toxic, green formulations and materials to render fabrics liquid repellent that constitute the focus of this review paper. As such, this review article discusses and summarizes recent developments and techniques on various sustainable superhydrophobic treatments for textiles, with comparable performance and durability to formulations based on fluorinated C8 compounds. The current state-of-the-art technologies, potential commercialization prospects, and relevant limitations are discussed and summarized with examples. The review also attempts to indicate promising future strategies and new materials that can transform the process for non-wettable textiles into an all-sustainable technology.

Structural Color Fibers Directly Drawn from Colloidal Suspensions with Controllable Optical Properties

Fibers with structural colors are of great interest due to their unique dye-free optical properties and show great potential in the textile industry. However, the preparation of structural color fibers with controllable optical properties in a simple way is still a challenge. In this paper, we prepared structural color fibers by simply drawing bare fibers from colloid suspensions. The obtained fibers displayed brilliant colors due to the assembled photonic crystal structures on the surface. The layer numbers of colloid coatings were tunable by varying the drawing speeds, concentration of colloid suspension, and diameters of core fibers. The optical properties of the obtained structural color fibers varied by layer numbers, viewing angles, and structure defects and were systematically studied both by experimental measurements and by computer simulations. Furthermore, noncrack blue fibers were demonstrated by coating "soft" poly[styrene- co-(butyl acrylate)- co-(acrylic acid)] (P(St-BA-AA)) polymer spheres on PET fibers. The coating was mechanically robust and made the fiber bendable with weaving ability, which means this method has versatile applicability and could be potentially used for green textile dyeing.

Rapid Fabrication of Noniridescent Structural Color Coatings with High Color Visibility, Good Structural Stability, and Self-Healing Properties

Artificial construction of amorphous photonic structures (APSs) is an important approach for obtaining noniridescent structural colors and shows a great potential for practical applications in paints, textile coloring, display, or other color-related fields. However, the structural colors are usually dim because of the influence of incoherent scattering, and the point contact among the microspheres leads to poor structural stability. This paper presents an innovative strategy for constructing noniridescent structural color coatings with high color visibility, good structural stability, and self-healing properties by combining APSs with polymers. Color visibility is significantly improved without the addition of black light-absorbing substances because of the inherent properties of polysulfide microspheres. At the same time, the introduction of waterborne polyurea in the system enhanced the structural stability and imparted the self-healing properties. The prepared coatings can be applied to various substrates and even to the coloration of soft fabrics, which not only achieves excellent performance but can also be easily patterned on the bulk scale.

An iridescent film of porous anodic aluminum oxide with alternatingly electrodeposited Cu and SiO2 nanoparticles

The structurally colored surface of anodic aluminum oxide (AAO) is highly useful for decoration and anti-counterfeiting applications, which are of significance for both scientific and industrial communities. This study presents the first demonstration of the fabrication of an iridescent film of porous AAO on an industrial aluminum alloy substrate, with alternatingly electrodeposited Cu and SiO₂ nanoparticles (NPs). A rainbow effect was effectively obtained for the optimized sample with appropriate alternating electrodeposition times. The structure and optical properties of a series of the electrodeposited AAO-based thin film were investigated. The Cu and SiO₂ NPs were found to be uniformly deposited into the porous structure of the AAO film, and the alternating electrodeposition repeating twice led to the formation of the optimal AAO-based thin film that exhibited a rainbow effect and superior anti-corrosion performance.

Facile Fabrication of Amorphous Photonic Structures with Non-Iridescent and Highly-Stable Structural Color on Textile Substrates

Amorphous photonic structures with non-iridescent and highly-stable structural color were fabricated via a simple one-step spray-coating technique. With this strategy, the obtained films on textile substrates presented short-ordered and amorphous photonic structures (APSs) similar to the amorphous nanostructures of avian feathers. The structural color presented the same hue when viewed at different angles and could be well controlled by varying the diameters of the SiO₂ nanospheres. The prepared fabrics with structural color exhibited high color stability due to stability in both the assembled physical structure and the refractive index. The high stability of the assembled physical structure was attributed to the cementing effect of Poly(methylmethacrylate-butylacrylate) P(MMA-BA) existing between textile substrate and SiO₂ nanospheres and among SiO₂ nanospheres, while the high stability in the refractive index was contributed by the liquid-resistance achieved by both the surface roughness and the low-surface-energy of the as-sprayed APSs. With the resistances to external forces and liquid invasion, the non-iridescent brilliant structural color of the as-prepared fabrics could be kept steady. In this study, an approach of fabricating APSs with non-iridescent and stable structural color was established to enhance its potential application in structural coloration of textiles, and other color-related smart textiles.

Additive Mixing and Conformal Coating of Noniridescent Structural Colors with Robust Mechanical Properties Fabricated by Atomization Deposition

Artificial structural colors based on short-range-ordered amorphous photonic structures (APSs) have attracted great scientific and industrial interest in recent years. However, the previously reported methods of self-assembling colloidal nanoparticles lack fine control of the APS coating and fixation on substrates and poorly realize three-dimensional (3D) conformal coatings for objects with irregular or highly curved surfaces. In this paper, atomization deposition of silica colloidal nanoparticles with poly(vinyl alcohol) as the additive is proposed to solve the above problems. By finely controlling the thicknesses of APS coatings, additive mixing of noniridescent structural colors is easily realized. Based on the intrinsic omnidirectional feature of atomization, a one-step 3D homogeneous conformal coating is also readily realized on various irregular or highly curved surfaces, including papers, resins, metal plates, ceramics, and flexible silk fabrics. The vivid coatings on silk fabrics by atomization deposition possess robust mechanical properties, which are confirmed by rubbing and laundering tests, showing great potential in developing an environmentally friendly coloring technique in the textile industry.

Magnet-responsive, superhydrophobic fabrics from waterborne, fluoride-free coatings

Durable superhydrophobic fabrics with magnetic response ability have been prepared by waterborne, fluoride-free coatings.

Environment and human friendly colored materials prepared using black and white components

A review describing how to prepare structural colored materials with less angle dependency using white and black substances.

Structural Color Tuning: Mixing Melanin-Like Particles with Different Diameters to Create Neutral Colors

We present the ability to tune structural colors by mixing colloidal particles. To produce high-visibility structural colors, melanin-like core-shell particles composed of a polystyrene (PSt) core and a polydopamine (PDA) shell, were used as components. The results indicated that neutral structural colors could be successfully obtained by simply mixing two differently sized melanin-like PSt@PDA core-shell particles. In addition, the arrangements of the particles, which were important factors when forming structural colors, were investigated by mathematical processing using a 2D Fourier transform technique and Voronoi diagrams. These findings provide new insights for the development of structural color-based ink applications.

Durable, self-healing, superhydrophobic fabrics from fluorine-free, waterborne, polydopamine/alkyl silane coatings

Superhydrophobic fabrics prepared from a polydopamine coating show high water repellency, good durability and self-healing property.