New methodological developments for testing the in vitro genotoxicity of nanomaterials: Comparison of 2D and 3D HepaRG liver cell models and classical and high throughput comet assay formats

Nanomaterials (NMs) are defined as materials with at least one external dimension below 100 nm. Their small size confers them interesting unique physico-chemical properties, hence NMs are increasingly used in a diversity of applications. However, the specific properties of NMs could also make them more harmful than their bulk counterparts. Therefore, there is a crucial need to deliver efficient NM hazard assessment in order to sustain the responsible development of nanotechnology. This study analysed the genotoxic potential of several NMs: one titanium dioxide (TiO2) and two zinc oxide NMs (ZnO) that were tested up to 100 μg/mL on 2D and 3D hepatic HepaRG models. Genotoxicity analysis was performed comparing the alkaline comet assay in classical and high throughput formats. Moreover, oxidative DNA lesions were investigated with the Fpg-modified comet assay. Results showed that TiO2 NMs were not cytotoxic and not genotoxic in either cell model, although a small increase in the % tail DNA was observed in 3D HepaRG cells at 100 μg/mL in the classical format. The two ZnO NMs (ZnO S. NMs a commercial suspension and NM110 provided by the European Union Joint Research Centre) induced a concentration-dependent increase in cytotoxicity that was more pronounced in the 2D (>20% cytotoxicity was observed for ZnO S. at concentrations greater than 25 μg/mL, and for NM 110 at 50 μg/mL) than in the 3D model (more than 20% cytotoxicity for ZnO S. NMs at 50 μg/mL). While ZnO S. NMs induced DNA damage associated with cytotoxicity (at 25 and 50 μg/mL in 2D and 50 μg/mL in 3D), NM110 showed a clear genotoxic effect at non-cytotoxic concentrations (25 μg/mL in 2D and at 25 and 50 μg/mL in 3D). No major differences could be observed in the comet assay in the presence or absence of the Fpg enzyme. High throughput analysis using CometChip® mostly confirmed the results obtained with the classical format, and even enhanced the detection of genotoxicity in the 3D model. In conclusion, this study demonstrated that new approach methodologies (NAMs), 3D models and the high throughput format for the comet assay, were more efficient in the detection of genotoxic effects, and are therefore promising approaches to improve hazard assessment of NMs.

Tailoring biomaterials for biomimetic organs-on-chips

Organs-on-chips are microengineered microfluidic living cell culture devices with continuously perfused chambers penetrating to cells. By mimicking the biological features of the multicellular constructions, interactions among organs, vascular perfusion, physicochemical microenvironments, and so on, these devices are imparted with some key pathophysiological function levels of living organs that are difficult to be achieved in conventional 2D or 3D culture systems. In this technology, biomaterials are extremely important because they affect the microstructures and functionalities of the organ cells and the development of the organs-on-chip functions. Thus, herein, we provide an overview on the advances of biomaterials for the construction of organs-on-chips. After introducing the general components, structures, and fabrication techniques of the biomaterials, we focus on the studies of the functions and applications of these biomaterials in the organs-on-chips systems. Applications of the biomaterial-based organs-on-chips as alternative animal models for pharmaceutical, chemical, and environmental tests are described and highlighted. The prospects for exciting future directions and the challenges of biomaterials for realizing the further functionalization of organs-on-chips are also presented.

Nanoparticle-induced immune response: Health risk versus treatment opportunity?

Nanoparticles (NPs) are not only employed in many biomedical applications in an engineered form, but also occur in our environment, in a more hazardous form. NPs interact with the immune system through various pathways and can lead to a myriad of different scenarios, ranging from their quiet removal from circulation by macrophages without any impact for the body, to systemic inflammatory effects and immuno-toxicity. In the latter case, the function of the immune system is affected by the presence of NPs. This review describes, how both the innate and adaptive immune system are involved in interactions with NPs, together with the models used to analyse these interactions. These models vary between simple 2D in vitro models, to in vivo animal models, and also include complex all human organ on chip models which are able to recapitulate more accurately the interaction in the in vivo situation. Thereafter, commonly encountered NPs in both the environment and in biomedical applications and their possible effects on the immune system are discussed in more detail. Not all effects of NPs on the immune system are detrimental; in the final section, we review several promising strategies in which the immune response towards NPs can be exploited to suit specific applications such as vaccination and cancer immunotherapy.

Metabolomic responses in livers of female and male zebrafish (Danio rerio) following prolonged exposure to environmental levels of zinc oxide nanoparticles

Zinc oxide nanoparticles (ZnONPs) are widespread pollutants that are present in diverse environmental samples. Here, we determined metabolomic and bioenergetic responses in the liver of female and male zebrafish exposed to a prolonged environmentally relevant concentration of ZnONPs. Metabolome analysis revealed that exposure to 500 μg/L ZnONPs reduced the abundance of metabolites in the tricarboxylic acid (TCA) cycle by modulating the activities of rate-limiting enzymes α-ketoglutarate dehydrogenase and isocitrate dehydrogenase. Moreover, oxidative phosphorylation (OXPHOS) was negatively impacted in the liver based upon decreased activities of mitochondrial Complex I and V in both female and male livers. Our results revealed that bioenergetic responses were not attributed to dissolved Zn²⁺ and were not sex-specific. However, the metabolic responses in liver following exposure to ZnONPs did show sex-specific responses. Females exposed to ZnONPs compensated for the energetic stress via increasing fatty acids and amino acids metabolism, while males compensated to ZnONPs exposure by adjusting amino acids metabolism, based upon transcript profiles. This study demonstrates that zebrafish adjust the transcription of metabolic enzymes in the liver to compensate for metabolic disruption following ZnONPs exposure. Taken together, this study contributes to a comprehensive understanding of risks related to ZnONPs exposure in relation to metabolic activity in the liver. Environmental implication Zinc oxide nanoparticles (ZnONPs) are widely used in industry and are subsequently released into environments. However, biological responses between female and male following ZnONPs exposure has never been compared. Our data revealed for the first time that female and male zebrafish showed comparable bioenergetic responses, but different metabolic responses to ZnONPs at an environmentally relevant dose. Females compensated for the energetic stress via increasing fatty acids and amino acids metabolism, while males compensated to ZnONPs exposure by adjusting amino acids metabolism in livers. This study reveals that sex may be an important variable to consider in risk assessments of nanoparticles released into environments.

Comprehensive Review on the Degradation Chemistry and Toxicity Studies of Functional Materials

In recent decades there has been growing interest of material chemists in the successful development of functional materials for drug delivery, tissue engineering, imaging, diagnosis, theranostic, and other biomedical applications with advanced nanotechnology tools. The efficacy and safety of functional materials are determined by their pharmacological, toxicological, and immunogenic effects. It is essential to consider all degradation pathways of functional materials and to assess plausible intermediates and final products for quality control. This review provides a brief insight into chemical degradation mechanisms of functional materials like oxidation, photodegradation, and physical and enzymatic degradation. The intermediates and products of degradation were confirmed with analytical methods such as proton nuclear magnetic resonance (¹H NMR), gel permeation chromatography (GPC), UV-vis spectroscopy (UV-vis), infrared spectroscopy (IR), differential scanning calorimetry (DSC), mass spectroscopy, and other sophisticated analytical methods. These analytical methods are also used for regulatory, quality control, and stability purposes in industry. The assessment of degradation is important to predetermine the behavior of functional materials in specific storage conditions and can be relevant to their behavior during in vivo applications. Another important aspect is the evaluation of the toxicity of functional materials. Toxicity can be accessed with various methods using in vitro, in vivo, ex vivo, and in silico models. In vitro cell culture methods are used to determine mitochondrial damage, reactive oxygen species, stress responses, and cellular toxicity. In vitro cellular toxicity can be measured by MTT assay, LDH leakage assay, and hemolysis. In vivo studies are performed using various animal models involving zebrafish, rodents (mice and rats), and nonhuman primates. Ex vivo studies are also used for efficacy and toxicity determinations of functional materials like ex vivo potency assay and precision-cut liver slice (PCLS) models. The in silico tools with computational simulations like quantitative structure-activity relationships (QSAR), pharmacokinetics (PK) and pharmacodynamics (PD), dose and time response, and quantitative cationic-activity relationships ((Q)CARs) are used for prediction of the toxicity of functional materials. In this review, we studied the principle methods used for degradation studies, different degradation pathways, and mechanisms of functional material degradation with prototype examples. We discuss toxicity assessments with different toxicity approaches used for estimation of the safety and efficacy of functional materials.

Effects of Zinc Oxide Nanoparticles on Model Systems of the Intestinal Barrier

Zinc oxide nanoparticles (ZnO NP) are often used in the food sector, among others, because of their advantageous properties. As part of the human food chain, they are inevitably taken up orally. The debate on the toxicity of orally ingested ZnO NP continues due to incomplete data. Therefore, the aim of our study was to examine the effects of two differently sized ZnO NP (<50 nm and <100 nm primary particle size; 123–614 µmol/L) on two model systems of the intestinal barrier. Differentiated Caco-2 enterocytes were grown on Transwell inserts in monoculture and also in coculture with the mucus-producing goblet cell line HT29-MTX. Although no comprehensive mucus layer was detectable in the coculture, cellular zinc uptake was clearly lower after a 24-h treatment with ZnO NP than in monocultured cells. ZnO NP showed no influence on the permeability, metabolic activity, cytoskeleton and cell nuclei. The transepithelial electrical resistance was significantly increased in the coculture model after treatment with ≥307 µmol/L ZnO NP. Only small zinc amounts (0.07–0.65 µg/mL) reached the basolateral area. Our results reveal that the cells of an intact intestinal barrier interact with ZnO NP but do not suffer serious damage.

Multiparametric nanoparticle-induced toxicity readouts with single cell resolution in HepG2 multicellular tumour spheroids

The use of nanomaterials as therapeutic delivery vehicles requires their careful pre-clinical evaluation. Of particular importance in this regard is measurement of cellular toxicity, ideally assessing multiple parameters in parallel from various relevant subcellular organelles. In recent years it has become evident that in vitro monolayer-grown cells do not always accurately predict any toxicity response seen in vivo, and so there is a need for more sophisticated in vitro cell models, employing a greater depth of characterisation. In this work we present an automated high-content screening microscopy approach for quantifying nanoparticle-induced toxicity in a three-dimensional multicellular tumour spheroid (MCTS) cell model. As a proof-of-principle, we perform a comparative toxicity profile study of carboxylate- versus amine-modified polystyrene nanoparticles in HepG2 spheroids. Following treatment with these nanoparticle types, we demonstrate that several hundred spheroids, of various sizes, can be morphologically profiled in a single well using automated high-content image analysis. This provides a first level of information about spheroid health in response to nanoparticle treatment. Using a range of fluorescent reporters assessing membrane permeability, lysosome function and mitochondrial activity, we also show that nanoparticle-induced toxicity information can be obtained from individual cells with subcellular resolution. Strikingly, our work demonstrates that individual cells do not all behave in a consistent manner within a spheroid structure after exposure to nanoparticles. This highlights the need for toxicity studies to not only assess an appropriate number of spheroids, but also the importance of extracting information at the subcellular level.

Organoid Technology: A Reliable Developmental Biology Tool for Organ-Specific Nanotoxicity Evaluation

Engineered nanomaterials are bestowed with certain inherent physicochemical properties unlike their parent materials, rendering them suitable for the multifaceted needs of state-of-the-art biomedical, and pharmaceutical applications. The log-phase development of nano-science along with improved "bench to beside" conversion carries an enhanced probability of human exposure with numerous nanoparticles. Thus, toxicity assessment of these novel nanoscale materials holds a key to ensuring the safety aspects or else the global biome will certainly face a debacle. The toxicity may span from health hazards due to direct exposure to indirect means through food chain contamination or environmental pollution, even causing genotoxicity. Multiple ways of nanotoxicity evaluation include several in vitro and in vivo methods, with in vitro methods occupying the bulk of the "experimental space." The underlying reason may be multiple, but ethical constraints in in vivo animal experiments are a significant one. Two-dimensional (2D) monoculture is undoubtedly the most exploited in vitro method providing advantages in terms of cost-effectiveness, high throughput, and reproducibility. However, it often fails to mimic a tissue or organ which possesses a defined three-dimensional structure (3D) along with intercellular communication machinery. Instead, microtissues such as spheroids or organoids having a precise 3D architecture and proximate in vivo tissue-like behavior can provide a more realistic evaluation than 2D monocultures. Recent developments in microfluidics and bioreactor-based organoid synthesis have eased the difficulties to prosper nano-toxicological analysis in organoid models surpassing the obstacle of ethical issues. The present review will enlighten applications of organoids in nanotoxicological evaluation, their advantages, and prospects toward securing commonplace nano-interventions.

Nano-cell and nano-pollutant interactions constitute key elements in nanoparticle-pollutant combined cytotoxicity

As the wide application of carbon nanoparticles (CNPs) and zinc oxide nanoparticles (ZnONPs), as well as ubiquitous chromium (Cr(VI)) pollution in environment, the chance of human exposure to CNPs/ZnONPs and their Cr(VI) adducts is enhanced. We therefore investigated the impacts of nano-cell and nano-Cr(VI) interactions on nanoparticle-Cr(VI) combined cytotoxicity in human lung epithelial (A549) cells. Our results showed that nano-cell and nano-pollutant interactions were the key elements in NP-pollutant combined cytotoxicity, as determined by cell death, oxidative stress and mitochondrial dysfunction. A strong adsorption of Cr(VI) on CNPs and reduction of Cr(VI) to Cr(III) were confirmed, resulting in the reduced cytotoxicity of CNP-Cr(VI) adducts. In contrast, ZnONPs caused the destruction of cell membranes so that more ZnONP-Cr(VI) adducts could enter the cells. Meantime, more Cr contents could be released from ZnONP-Cr(VI) adducts once entering cells and locating in lysosomes than that from CNP-Cr(VI) adducts. These two reasons together caused the enhanced cytotoxicity of ZnONP-Cr(VI) adducts. These findings indicate that the in-depth investigations on the interaction mechanisms are crucial to comprehensively understand the combined cytotoxicity of different NPs and pollutants.

A Tissue-Engineered Tracheobronchial In Vitro Co-Culture Model for Determining Epithelial Toxicological and Inflammatory Responses

Translation of novel inhalable therapies for respiratory diseases is hampered due to the lack of in vitro cell models that reflect the complexity of native tissue, resulting in many novel drugs and formulations failing to progress beyond preclinical assessments. The development of physiologically-representative tracheobronchial tissue analogues has the potential to improve the translation of new treatments by more accurately reflecting in vivo respiratory pharmacological and toxicological responses. Herein, advanced tissue-engineered collagen hyaluronic acid bilayered scaffolds (CHyA-B) previously developed within our group were used to evaluate bacterial and drug-induced toxicity and inflammation for the first time. Calu-3 bronchial epithelial cells and Wi38 lung fibroblasts were grown on either CHyA-B scaffolds (3D) or Transwell® inserts (2D) under air liquid interface (ALI) conditions. Toxicological and inflammatory responses from epithelial monocultures and co-cultures grown in 2D or 3D were compared, using lipopolysaccharide (LPS) and bleomycin challenges to induce bacterial and drug responses in vitro. The 3D in vitro model exhibited significant epithelial barrier formation that was maintained upon introduction of co-culture conditions. Barrier integrity showed differential recovery in CHyA-B and Transwell® epithelial cultures. Basolateral secretion of pro-inflammatory cytokines to bacterial challenge was found to be higher from cells grown in 3D compared to 2D. In addition, higher cytotoxicity and increased basolateral levels of cytokines were detected when epithelial cultures grown in 3D were challenged with bleomycin. CHyA-B scaffolds support the growth and differentiation of bronchial epithelial cells in a 3D co-culture model with different transepithelial resistance in comparison to the same co-cultures grown on Transwell® inserts. Epithelial cultures in an extracellular matrix like environment show distinct responses in cytokine release and metabolic activity compared to 2D polarised models, which better mimic in vivo response to toxic and inflammatory stimuli offering an innovative in vitro platform for respiratory drug development.

An integrated approach for assessing the in vitro and in vivo redox-related effects of nanomaterials

Over the last few decades, nanotechnology has risen to the forefront of both the research and industrial interest, resulting in the manufacture and utilization of various nanomaterials, as well as in their integration into a wide range of fields. However, the consequent elevated exposure to such materials raises serious concerns regarding their effects on human health and safety. Existing scientific data indicate that the induction of oxidative stress, through the excessive generation of Reactive Oxygen Species (ROS), might be the principal mechanism of exerting their toxicity. Meanwhile, a number of nanomaterials exhibit antioxidant properties, either intrinsic or resulting from their functionalization with conventional antioxidants. Considering that their redox properties are implicated in the manifestation of their biological effects, we propose an integrated approach for the assessment of the redox-related activities of nanomaterials at three biological levels (in vitro-cell free systems, cell cultures, in vivo). Towards this direction, a battery of translational biomarkers is recommended, and a series of reliable protocols are presented in detail. The aim of the present approach is to acquire a better understanding with respect to the biological actions of nanomaterials in the interrelated fields of Redox Biology and Toxicology.

Contribution of Particle-Induced Lysosomal Membrane Hyperpolarization to Lysosomal Membrane Permeabilization

Lysosomal membrane permeabilization (LMP) has been proposed to precede nanoparticle-induced macrophage injury and NLRP3 inflammasome activation; however, the underlying mechanism(s) of LMP is unknown. We propose that nanoparticle-induced lysosomal hyperpolarization triggers LMP. In this study, a rapid non-invasive method was used to measure changes in lysosomal membrane potential of murine alveolar macrophages (AM) in response to a series of nanoparticles (ZnO, TiO2, and CeO2). Crystalline SiO2 (micron-sized) was used as a positive control. Changes in cytosolic potassium were measured using Asante potassium green 2. The results demonstrated that ZnO or SiO2 hyperpolarized the lysosomal membrane and decreased cytosolic potassium, suggesting increased lysosome permeability to potassium. Time-course experiments revealed that lysosomal hyperpolarization was an early event leading to LMP, NLRP3 activation, and cell death. In contrast, TiO2- or valinomycin-treated AM did not cause LMP unless high doses led to lysosomal hyperpolarization. Neither lysosomal hyperpolarization nor LMP was observed in CeO2-treated AM. These results suggested that a threshold of lysosomal membrane potential must be exceeded to cause LMP. Furthermore, inhibition of lysosomal hyperpolarization with Bafilomycin A1 blocked LMP and NLRP3 activation, suggesting a causal relation between lysosomal hyperpolarization and LMP.

Biomaterials for Three-Dimensional Cell Culture: From Applications in Oncology to Nanotechnology

Three-dimensional cell culture has revolutionized cellular biology research and opened the door to novel discoveries in terms of cellular behavior and response to microenvironment stimuli. Different types of 3D culture exist today, including hydrogel scaffold-based models, which possess a complex structure mimicking the extracellular matrix. These hydrogels can be made of polymers (natural or synthetic) or low-molecular weight gelators that, via the supramolecular assembly of molecules, allow the production of a reproducible hydrogel with tunable mechanical properties. When cancer cells are grown in this type of hydrogel, they develop into multicellular tumor spheroids (MCTS). Three-dimensional (3D) cancer culture combined with a complex microenvironment that consists of a platform to study tumor development and also to assess the toxicity of physico-chemical entities such as ions, molecules or particles. With the emergence of nanoparticles of different origins and natures, implementing a reproducible in vitro model that consists of a bio-indicator for nano-toxicity assays is inevitable. However, the maneuver process of such a bio-indicator requires the implementation of a repeatable system that undergoes an exhaustive follow-up. Hence, the biggest challenge in this matter is the reproducibility of the MCTS and the associated full-scale characterization of this system's components.

Advances of microfluidic intestine-on-a-chip for analyzing anti-inflammation of food

Microfluidic intestine-on-a-chip enables novel means of emulating human intestinal pathophysiology in vitro, which can potentially reduce animal testing and substitute simple 2D culture system. Though a great deal of work has been done in the development of microfluidic platforms for intestinal disease modeling and drug screening, potential investigation of the effect of bioactive food compounds on intestinal inflammation remains largely unexplored. In this review, different biomaterials and chip designs have been explored in the fabrication of intestine-on-a-chip. Other key parameters must be carefully controlled and selected, including shear stress, cell type and cell co-culture spatial configuration, etc. Appropriate techniques to quantify the barrier integrity including trans-epithelial electric resistance, specific tight junction markers and permeability measurements should be standardized and compared with in vivo data. Integration of the gut microbiome and the provision of intestinal-specific environment are the key parameters to realize the in vivo intestinal model simulation and accelerate the screening efficiency of bioactive food compounds.

TatS: a novel in vitro tattooed human skin model for improved pigment toxicology research

Reports of tattoo-associated risks boosted the interest in tattoo pigment toxicity over the last decades. Nonetheless, the influence of tattoo pigments on skin homeostasis remains largely unknown. In vitro systems are not available to investigate the interactions between pigments and skin. Here, we established TatS, a reconstructed human full-thickness skin model with tattoo pigments incorporated into the dermis. We mixed the most frequently used tattoo pigments carbon black (0.02 mg/ml) and titanium dioxide (TiO2, 0.4 mg/ml) as well as the organic diazo compound Pigment Orange 13 (0.2 mg/ml) into the dermis. Tissue viability, morphology as well as cytokine release were used to characterize TatS. Effects of tattoo pigments were compared to monolayer cultures of human fibroblasts. The tissue architecture of TatS was comparable to native human skin. The epidermal layer was fully differentiated and the keratinocytes expressed occludin, filaggrin and e-cadherin. Staining of collagen IV confirmed the formation of the basement membrane. Tenascin C was expressed in the dermal layer of fibroblasts. Although transmission electron microscopy revealed the uptake of the tattoo pigments into fibroblasts, neither viability nor cytokine secretion was altered in TatS. In contrast, TiO2 significantly decreased cell viability and increased interleukin-8 release in fibroblast monolayers. In conclusion, TatS emulates healed tattooed human skin and underlines the advantages of 3D systems over traditional 2D cell culture in tattoo pigment research. TatS is the first skin model that enables to test the effects of pigments in the dermis upon tattooing.

Application of microphysiological systems in biopharmaceutical research and development

Within the last 10 years, several tissue microphysiological systems (MPS) have been developed and characterized for retention of morphologic characteristics and specific gene/protein expression profiles from their natural in vivo state. Once developed, their utility is typically further tested by comparing responses to known toxic small-molecule pharmaceuticals in efforts to develop strategies for further toxicity testing of compounds under development. More recently, application of this technology in biopharmaceutical (large molecules) development is beginning to be more appreciated. In this review, we describe some of the advances made for tissue-specific MPS and outline the advantages and challenges of applying and further developing MPS technology in preclinical biopharmaceutical research.

Synergistic therapy of magnetism-responsive hydrogel for soft tissue injuries

Soft tissue injury is very common and associated with pain, tissue swelling and even malformation if not treated on time. Treating methods include cryotherapy, electrical therapy, ultrasound therapy and anti-inflammatory drug, but none of them is completely satisfying. In this work, for a better therapeutic effect, drug therapy and pulsed electromagnetic field (PEMF) therapy were combined. We constructed a drug delivery system using the tetra-PEG/agar hydrogel (PA). By incorporating Fe3O4 NPs into the hydrogel network, a magnetism-responsive property was achieved in the system. The cytotoxicity and in vivo study showed a good biocompatibility of the PA/Fe3O4 hydrogel. A magnetism-controlled release was attained by the incorporation of Fe3O4. Finally, in vivo study showed a better performance of the DS-loaded PA/Fe3O4 compared with the commercially available DS ointment regarding the recovery of the injured soft tissue. Therefore, this magnetism-responsive hydrogel may represent a promising alternative to treat soft tissue injury.

Zinc oxide nanoparticles induce toxicity by affecting cell wall integrity pathway, mitochondrial function and lipid homeostasis in Saccharomyces cerevisiae

Growing numbers of nanotoxicity research demonstrating that mechanical damage and oxidative stress are potential modes of nanoparticles (NPs) induced toxicity. However, the underlying mechanisms by which NPs interact with the eukaryotic cell and affect their physiological and metabolic functions are not fully known. We investigated the toxic effects of zinc oxide nanoparticles (ZnO-NPs) on budding yeast, Saccharomyces cerevisiae and elucidated the underlying mechanism. We observed cell wall damage and accumulation of reactive oxygen species (ROS) leading to cell death upon ZnO-NPs exposure. We detected a significant change in the cellular distribution of lipid biosynthetic enzymes (Fas1 and Fas2). Furthermore, exposure of ZnO-NPs altered the architecture of endoplasmic reticulum (ER) and mitochondria as well as ER-mitochondria encounter structure (ERMES) complex causing cellular toxicity due to lipid disequilibrium and proteostasis. We also observed significant changes in heat shock and unfolded protein responses, monitored by Hsp104-GFP localization and cytosolic Hac1 splicing respectively. Moreover, we observed activation of MAP kinases of CWI (Mpk1) and HOG (Hog1) pathways upon exposure to ZnO-NPs. Transcript level analyses showed induction of chitin synthesis and redox homeostasis genes. Finally, we observed induction in lipid droplets (LDs) formation, distorted vacuolar morphology and induction of autophagy as monitored by localization of Atg8p. However, we did not observe any significant change in epigenetic marks, examined by western blotting. Altogether, we provide evidence that exposure of ZnO-NPs results in cell death by affecting cell wall integrity and ER homeostasis as well as accumulation of ROS and saturated free fatty acids.

Comparison of conventional and advanced in vitro models in the toxicity testing of nanoparticles

Humans are exposed to a wide variety of nanoparticles (NPs) present in the environment, in consumer, health and medical products, and in food. Conventional cytotoxicity testing compared to animal testing is less expensive, faster and avoids ethical problems at the expense of a lower predictive value. New cellular models and exposure conditions have been developed to overcome the limitations of conventional cell culture and obtain more predictive data. The use of three-dimensional culture, co-culture and inclusion of mechanical stimulation can provide physiologically more relevant culture conditions. These systems are particularly relevant for oral, respiratory and intravenous exposure to NPs and it may be assumed that physiologically relevant application of the NPs can improve the predictive value of in vitro testing. Various groups have used advanced culture and exposure systems, but few direct comparisons between data from conventional cultures and from advanced systems exist. In silico models may present another option to predict human health risk by NPs without using animal studies. In the absence of validation, the question whether these alternative models provide more predictive data than conventional testing remains elusive.

Doxorubicin-Wrapped Zinc Oxide Nanoclusters for the Therapy of Colorectal Adenocarcinoma

Doxorubicin (DOX)-wrapped zinc oxide nanoclusters (ZnO NCs) were developed for the therapy of colorectal cancer. DOX was coated onto the agglomerates of ZnO nanoparticles using a facile coating process. DOX-ZnO NCs with a hydrodynamic size of 170 nm, narrow size distribution, and positive zeta potential were fabricated. The aggregated shape of developed DOX-ZnO NCs was observed by transmission electron microscopy (TEM) imaging. The result of Fourier-transform infrared (FT-IR) analysis suggested the interaction between DOX and ZnO in DOX-ZnO NCs. The existence of DOX in the outer surface of DOX-ZnO NCs was further identified by X-ray powder diffractometer (XRD) and X-ray photoelectron spectroscopy (XPS) analyses. Cellular uptake efficiency and antiproliferation efficacy of developed DOX-ZnO NCs were tested in Caco-2 (human colorectal adenocarcinoma) cells. The cellular accumulated amount of DOX-ZnO NCs was 3.19-fold higher than that of free DOX (p < 0.05). The DOX-ZnO NCs group also exhibited improved antiproliferation potentials, compared with the DOX and ZnO groups, in Caco-2 cells at 0.5 and 1 μg/mL DOX concentrations. All these findings imply that developed DOX-ZnO NCs can be efficient hybrid nanoformulations for the therapy of colorectal cancers.