Supersonically Sprayed Washable, Wearable, Stretchable, Hydrophobic, and Antibacterial rGO/AgNW Fabric for Multifunctional Sensors and Supercapacitors

Wearable electronic textiles are used in sensors, energy-harvesting devices, healthcare monitoring, human-machine interfaces, and soft robotics to acquire real-time big data for machine learning and artificial intelligence. Wearability is essential while collecting data from a human, who should be able to wear the device with sufficient comfort. In this study, reduced graphene oxide (rGO) and silver nanowires (AgNWs) were supersonically sprayed onto a fabric to ensure good adhesiveness, resulting in a washable, stretchable, and wearable fabric without affecting the performance of the designed features. This rGO/AgNW-decorated fabric can be used to monitor external stimuli such as strain and temperature. In addition, it is used as a heater and as a supercapacitor and features an antibacterial hydrophobic surface that minimizes potential infection from external airborne viruses or virus-containing droplets. Herein, the wearability, stretchability, washability, mechanical durability, temperature-sensing capability, heating ability, wettability, and antibacterial features of this metallized fabric are explored. This multifunctionality is achieved in a single fabric coated with rGO/AgNWs via supersonic spraying.

Triaxial Carbon Nanotube/Conducting Polymer Wet-Spun Fibers Supercapacitors for Wearable Electronics

The ubiquity of wearables, coupled with the increasing demand for power, presents a unique opportunity for nanostructured fiber-based mobile energy storage systems. When designing wearable electronic textiles, there is a need for mechanically flexible, low-cost and light-weight components. To meet this demand, we have developed an all-in-one fiber supercapacitor with a total thickness of less than 100 μm using a novel facile coaxial wet-spinning approach followed by a fiber wrapping step. The formed triaxial fiber nanostructure consisted of an inner poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) core coated with an ionically conducting chitosan sheath, subsequently wrapped with a carbon nanotube (CNT) fiber. The resulting supercapacitor is highly flexible, delivers a maximum energy density 5.83 Wh kg-1 and an extremely high power of 1399 W kg-1 along with remarkable cyclic stability and specific capacitance. This asymmetric all-in-one fiber supercapacitor may pave the way to a future generation of wearable energy storage devices.

Alternately Dipping Method to Prepare Graphene Fiber Electrodes for Ultra-high-Capacitance Fiber Supercapacitors

Flexible fiber supercapacitors are promising candidate for power supply of wearable electronics. Fabrication of high-performance fibers is in progress yet challenging. The currently available graphene fibers made from wet-spinning or electro-deposition technologies are far away from practical applications due to their unsatisfactory capacitance. Here we report a facile alternately dipping (AD) method to coat graphene on wire-like substrates. The excellent mechanical properties of the substrate with greatly diverse choices can be carried over to the fiber supercapacitors. Under such guideline, the graphene fiber with a titanium core made by our AD method (AD:Ti@RGO) shows an ultra-high specific capacitance of up to 1,722.1 mF cm⁻², which is ∼1,000 times that of wet-spinning- and electro-deposition-fabricated neat graphene fibers and presents the highest specific capacitance to date. With excellent mechanical properties and striking electrochemical performances, the AD:Ti@RGO-based supercapacitors light the path to the next-generation technologies for wearable devices.

•

A novel alternately dipping method to fabricate graphene fibers is reported

•

This method brings the fibers excellent mechanical and electrochemical properties

•

The graphene fiber shows an ultra-high specific capacitance of 1,722.1 mF cm⁻²

Graphene Papers with Tailored Pore Structures Fabricated from Crumpled Graphene Spheres

Graphene papers have great potential for various applications, such as electrodes in energy storage devices, protective coating, and desalination, because of their free-standing structure, flexibility, and chemical tunability. The inner structures of the graphene papers can affect their physical properties and device performance. Here, we investigated a way to fabricate graphene papers from crumpled reduced graphene oxide (rGO) spheres. We found that ultrasonication was useful for tailoring the morphology of the crumpled graphene spheres, resulting in a successful fabrication of graphene papers with tunable inner pore structures. The fabricated graphene papers showed changes in mechanical and electrical properties depending on their pore structures. In addition, the tailored pore structures had an influence on the electrochemical performance of supercapacitors with the fabricated graphene papers as electrode materials. This work demonstrates a facile method to fabricate graphene papers from crumpled rGO powders, as well as a fundamental understanding of the effect of the inner pore structures in mechanical, electrical, and electrochemical characteristics of graphene papers.

Fiber-Type Solar Cells, Nanogenerators, Batteries, and Supercapacitors for Wearable Applications

Wearable electronic devices represent a paradigm change in consumer electronics, on-body sensing, artificial skins, and wearable communication and entertainment. Because all these electronic devices require energy to operate, wearable energy systems are an integral part of wearable devices. Essentially, the electrodes and other components present in these energy devices should be mechanically strong, flexible, lightweight, and comfortable to the user. Presented here is a critical review of those materials and devices developed for energy conversion and storage applications with an objective to be used in wearable devices. The focus is mainly on the advances made in the field of solar cells, triboelectric generators, Li-ion batteries, and supercapacitors for wearable device development. As these devices need to be attached/integrated with the fabric, the discussion is limited to devices made in the form of ribbons, filaments, and fibers. Some of the important challenges and future directions to be pursued are also highlighted.

Wet-spun graphene filaments: effect of temperature of coagulation bath and type of reducing agents on mechanical & electrical properties

Although many factors are considered to improve the properties of graphene filaments, there is no report in the existing literature on the effect of the temperature of the coagulation bath to the mechanical properties of graphene oxide filaments obtained in the wet-spinning process and also to the mechanical and electrical properties of the resulting graphene filaments after reduction. In this study, the effect of the temperature of the isopropanol coagulation bath during wet-spinning of graphene filaments on their final properties after formation was investigated and it was found that the decrease of the coagulation bath temperature resulted in more compact filaments having better mechanical properties for both graphene oxide and corresponding reduced graphene filaments. The best tensile strength and Young's modulus values were obtained in isopropanol coagulation bath which was kept at 15 °C. On the other hand, the types of the chemical reduction agents which can provide better electrical conductivity to graphene filaments after reduction were also investigated and it was determined that the use of hydriodic acid/acetic acid mixture resulted in graphene filaments having the best electrical conductivity (1.28 × 10⁴ S m⁻¹) and also tensile strength (234 ± 26 MPa) values. The addition of acetic acid into hydriodic acid increased the tensile strength 26% when compared with the plain HI treatment. Both electrical conductivity and tensile strength results were higher than most of the previously reported values of the wet-spun neat graphene filaments in the literature.

Cold isopropanol coagulation bath and use of acetic acid/hydriodic acid reduction resulted in better tensile strength for wet-spun graphene filaments.

Fabrication of Hierarchical Porous Carbon Nanoflakes for High-Performance Supercapacitors

In the current work, the carbon nanoflakes (CNs-Fe/KOH) and porous carbon (PC-Ni/KOH) have been produced by using Fe(NO₃)₃/KOH and Ni(NO₃)₂/KOH as the cographitization/activation catalysts to treat the natural plane tree fluff, respectively. The as-prepared carbon materials show different morphologies when treated with different metal ions. Compared with PC-Ni/KOH, the CNs-Fe/KOH have both high graphitization degree (I_G/I_D = 1.53) and large S_BET (1416 m²/g). In a three-electrode setup, the CNs-Fe/KOH electrode shows a high specific capacitance of 253 F/g at 10 A/g, with a capacitance retention of 92.64% after 10000 cycles in 2 M H₂SO₄ aqueous solution, which is far better than the sample without Fe³⁺ addition. In 1 M LiPF₆ in ethylene carbonate/diethyl carbonate organic solution, CNs-Fe/KOH-based symmetric supercapacitor also presents an excellent specific capacitance of 32.2 F/g at 1 A/g. In addition, an energy density of 39.98 W h/kg can be achieved at the power density of 1.49 kW/kg. Influence of metal ions on the morphology and structure as well as electrochemical performance of the carbon materials are further analyzed in detail. The current work provides a novel path for design and fabrication of supercapacitor electrode materials with promising electrochemical performances.