Poly(vinyl alcohol)/modified porous starch gel beads for microbial preservation and reactivation: preparation, characterization and its wastewater treatment performance

Poly(vinyl alcohol) (PVA)/modified porous starch (MPS) gel beads were prepared through in situ chemical cross-linking by incorporating with MPS, which was obtained by modifying porous starch (PS) with polyethyleneimine (PEI) and glutaraldehyde (GA). Addition of MPS could improve the storage modulus and the effective crosslinking density (ve) of the gel beads, and the mechanical properties were enhanced. The PVA-MPS gel beads were preserved as immobilized microbial carriers for 40 d and reactivated in wastewater. Scanning electron microscope (SEM) observations showed that the beads were highly porous and conducive for microorganism adhesion. The PVA-MPS gel beads were able to remove 97% of ammonia nitrogen and 80% of chemical oxygen demand (COD) after reactivation under all four preservation conditions. The abundance of Hydrogenophaga as denitrifying bacteria on PVA-MPS gel beads increased, with abundance of 8.44%, 5.55%, 8.90% and 9.48%, respectively. It proved that the carrier provided a partial hypoxic environment for microorganisms.

Fe3O4 modified chitosan based co-polymeric magnetic composite hydrogel: Synthesis, characterization and evaluation for the removal of methylene blue from aqueous solutions

The present research comprises the fabrication of magnetic Fe₃O₄ incorporated chitosan grafted acrylamide and N-vinylimidazole composite hydrogels (CANFe-1 to CANFe-7) via water mediated free radical polymerization technique using ammonium persulfate/tetramethyl ethylenediamine as initiator. The prepared magnetic composite hydrogel was characterized by FT-IR, TGA, SEM, XRD, and VSM analysis. A swelling study was performed to understand the swelling behavior and found CANFe-4 to be more efficient with maximum swelling hence entire removal studies were performed with CANFe-4. pH_PZC analysis was performed to determine pH sensitive adsorptive removal of cationic dye (methylene blue). pH dependent adsorption of methylene blue was dominant at pH = 8 with a maximum adsorption capacity of 860 mg/g. After the adsorptive removal of methylene blue from aqueous media, a composite hydrogel can conveniently be separated from the solution with the use of an external magnet. Adsorption of methylene blue is well explained with the Langmuir adsorption isotherm and Pseudo-Second-Order kinetic model that validates chemisorption. Moreover, it was found that CANFe-4 could be frequently applied for the adsorptive removal of methylene blue for 5 consecutive adsorption-desorption cycles with 92.4 % removal efficiency. Hence, CANFe-4 offers a promising recyclable, sustainable, robust, and efficient adsorbent for wastewater treatment.

Influence of PFDA on the nutrient removal from wastewater by hydrogels containing microalgae-bacteria

PFAS have demonstrated to affect some aerobic microorganisms applied for wastewater treatment. This study evaluated the nutrient removal of three types of hydrogels containing a consortium of microalgae-bacteria (HB), activated carbon (HC), or both (HBC) in presence of perfluorodecanoic acid (PFDA). The nutrients evaluated were ammonium nitrogen (NH₄-N), nitrate nitrogen (NO₃-N), phosphate (PO₄), and chemical oxygen demand (COD). Fluorine (F^-) concentration and the integrity of HB exposed to PFDA were also determined at the end of experiments to understand the potential sorption and effects of PFDA on hydrogel. The results indicated that the presence of PFDA did affect the nitrification process, 13% and 36% to HB and HBC, respectively. Mass balance confirmed negative impact of PFDA on nitrogen consumption in HB (-31.37%). However, NH₄-N was removed by all types of hydrogels in a range of 61-79%, while PO₄ was mainly removed by hydrogels containing activated carbon (AC), 37.5% and 29.2% for HC and HBC, respectively. The removal of both NH₄ and PO₄, was mainly attributed to sorption processes in hydrogels, which was enhanced by the presence of AC. PFDA was also adsorbed in hydrogels, decreasing its concentration between 18% and 28% from wastewater, and up to 39% using HC. Regarding COD concentration, this increased overtime but was not related to hydrogel structure, since Transmission Electron Microscopy imaging revealed that their structure was preserved in presence of PFDA. COD increasement could be attributed to soluble algal products as well as to PVA leaching from hydrogels. In general, the presence of AC in hydrogels can contribute to mitigate the toxic effect of PFDA over microorganisms involved in biological nutrient removal, and hydrogels can be a technique to partially remove this contaminant from aqueous matrices.

A Nanoparticle Ink Allowing the High Precision Visualization of Tissue Engineered Scaffolds by MRI

Hydrogels are widely used as cell scaffolds in several biomedical applications. Once implanted in vivo, cell scaffolds must often be visualized, and monitored overtime. However, cell scaffolds appear poorly contrasted in most biomedical imaging modalities such as magnetic resonance imaging (MRI). MRI is the imaging technique of choice for high-resolution visualization of low-density, water-rich tissues. Attempts to enhance hydrogel contrast in MRI are performed with "negative" contrast agents that produce several image artifacts impeding the delineation of the implant's contours. In this study, a magnetic ink based on ultra-small iron oxide nanoparticles (USPIONs; <5 nm diameter cores) is developed and integrated into biocompatible alginate hydrogel used in cell scaffolding applications. Relaxometric properties of the magnetic hydrogel are measured, as well as biocompatibility and MR-visibility (T₁ -weighted mode; in vitro and in vivo). A 2-week MR follow-up study is performed in the mouse model, demonstrating no image artifacts, and the retention of "positive" contrast overtime, which allows very precise delineation of tissue grafts with MRI. Finally, a 3D-contouring procedure developed to facilitate graft delineation and geometrical conformity assessment is applied on an inverted template alginate pore network. This proof-of-concept establishes the possibility to reveal precisely engineered hydrogel structures using this USPIONs ink high-visibility approach.

Production and Anti-Inflammatory Performance of PVA Hydrogels Loaded with Curcumin Encapsulated in Octenyl Succinic Anhydride Modified Schizophyllan as Wound Dressings

Amphiphilic polysaccharides can be used as wall materials and applied to encapsulate hydrophobic active chemicals; moreover, there is significant demand for novel medical high-molecular-weight materials with various functions. In order to prepare amphiphilic schizophyllan (SPG), octenyl succinic anhydride (OSA) was chosen to synthesize OSA-modified schizophyllan (OSSPG) using an esterified reaction. The modification of OSSPG was demonstrated through FT-IR and thermal analysis. Moreover, it was found that OSSPG has a better capacity for loading curcumin, and the loading amount was 20 μg/mg, which was 2.6 times higher than that of SPG. In addition, a hydrogel made up of PVA, borax, and C-OSSPG (OSSPG loaded with curcumin) was prepared by means of the one-pot method, based on the biological effects of curcumin and the immune-activating properties of SPG. The mechanical properties and biological activity of the hydrogel were investigated. The experimental results show that the dynamic cross-linking of PVA and borax provided the C-OSSPG/BP hydrogel dressing with exceptional self-healing properties, and it was discovered that the C-OSSPG content increased the hydrogel's swelling and moisturizing properties. In fibroblast cell tests, the cells treated with hydrogel had survival rates of 80% or above. Furthermore, a hydrogel containing C-OSSPG could effectively promote cell migration. Due to the excellent anti-inflammatory properties of curcumin, the hydrogel also significantly reduces the generation of inflammatory factors, such as TNF-α and IL-6, and thus has a potential application as a wound dressing medicinal material.

Synthesis of magnetic/pH dual responsive dextran hydrogels as stimuli-sensitive drug carriers

Hydrogels loaded with magnetic nanoparticles have been widely researched recently as biomaterials, due to their good biocompatibility and unique magnetic characteristics. In this study, water-soluble superparamagnetic iron oxide nanoparticles (Fe₃O₄) prepared by coprecipitation were physically doped into the dextran hydrogels which were formed via Schiff base reactions between ethylenediamine and oxidized dextran. The combination of magnetic nanoparticles and chemical cross-linked hydrogels leads to magnetic/pH dual-sensitive hydrogels which can be used as stimuli-responsive carrier. Magnetic properties, swelling, and rheology behaviors of the resulted magnetic hydrogels were strongly affected by the Fe₃O₄ nanoparticle content. Moreover, doxorubicin (DOX⋅HCl) was embedded into the magnetic hydrogels and pH/magnetic sensitive release profiles were identified. The release mechanism analysis indicated that the release behaviors of DOX⋅HCl were controlled by the diffusion, swelling, and erosion processes simultaneously. The prepared hydrogel/Fe₃O₄ composites with dual magnetic/pH stimuli-responsiveness hold the promise to be used in various applications such as drug release.

From passive to emerging smart silicones

Amassing remarkable properties, silicones are practically indispensable in our everyday life. In most classic applications, they play a passive role in that they cover, seal, insulate, lubricate, water-proof, weather-proof etc. However, silicone science and engineering are highly innovative, seeking to develop new compounds and materials that meet market demands. Thus, the unusual properties of silicones, coupled with chemical group functionalization, has allowed silicones to gradually evolve from passive materials to active ones, meeting the concept of “smart materials”, which are able to respond to external stimuli. In such cases, the intrinsic properties of polysiloxanes are augmented by various chemical modifications aiming to attach reactive or functional groups, and/or by engineering through proper cross-linking pattern or loading with suitable fillers (ceramic, magnetic, highly dielectric or electrically conductive materials, biologically active, etc.), to add new capabilities and develop high value materials. The literature and own data reflecting the state-of-the art in the field of smart silicones, such as thermoplasticity, self-healing ability, surface activity, electromechanical activity and magnetostriction, thermo-, photo-, and piezoresponsivity are reviewed.

Magnetic Self-Healing Composites: Synthesis and Applications

Magnetic composites and self-healing materials have been drawing much attention in their respective fields of application. Magnetic fillers enable changes in the material properties of objects, in the shapes and structures of objects, and ultimately in the motion and actuation of objects in response to the application of an external field. Self-healing materials possess the ability to repair incurred damage and consequently recover the functional properties during healing. The combination of these two unique features results in important advances in both fields. First, the self-healing ability enables the recovery of the magnetic properties of magnetic composites and structures to extend their service lifetimes in applications such as robotics and biomedicine. Second, magnetic (nano)particles offer many opportunities to improve the healing performance of the resulting self-healing magnetic composites. Magnetic fillers are used for the remote activation of thermal healing through inductive heating and for the closure of large damage by applying an alternating or constant external magnetic field, respectively. Furthermore, hard magnetic particles can be used to permanently magnetize self-healing composites to autonomously re-join severed parts. This paper reviews the synthesis, processing and manufacturing of magnetic self-healing composites for applications in health, robotic actuation, flexible electronics, and many more.

ZnO/ZnS-Polyvinyl Alcohol Hydrogel for Photocatalytic H2-Generation

The separation of nanoparticles from a solution-based photocatalytic reaction is a significant problem in practical applications. To address the issue, we developed a new photocatalyst composite based on ZnO-ZnS heterojunction (ZnOS) embedded in polyvinyl alcohol (PVA) hydrogel, which showed satisfactory results for photocatalyst recycling. PVA-ZnOS composite hydrogel was fabricated by freezing-induced gelation, which enabled the encapsulation of ZnOS nanoparticles into polymeric matrices. PVA hydrogel served as a promising candidate in photocatalytic applications due to its excellent properties such as high transparency, porosity, hydrophilicity, and stability under ultraviolet (UV) light. PVA-ZnOS hydrogel showed worthy activity in H2 generation from Na2S/Na2SO3 aqueous solution under UV radiation with a production rate of 18.8 µmol.h−1. PVA-ZnOS composite hydrogel is a separation-free photocatalyst, which is prospective in a solution-based photocatalytic reactor.

Porous boron nitride nanofibers as effective nanofillers for poly(vinyl alcohol) composite hydrogels with excellent self-healing performances

New composite hydrogels with excellent self-healing properties were prepared by combining poly(vinyl alcohol) (PVA) and boron nitride nanofibers (BNNFs) via a facile one-pot assembly method. One-dimensional porous BNNFs with high aspect ratio, abundant hydroxyl functional groups, especially excellent flexibility which has been first demonstrated in experiments, can act as a decent inorganic nanofillers to effectively improve the mechanical and self-healing properties of PVA hydrogels. Both the tensile and compression performances of hydrogels have been greatly improved by the trace addition of BNNFs (only ∼1.25 wt%). Compared with other BN nanofillers with spherical particles and lamellar morphologies, BNNFs with high aspect ratios and good flexibility play a unique role in the preparation of PVA composite hydrogels with cross-linked three-dimensional polymeric networks. This can be explained by the different topological structures of composite hydrogels formed. The abundant hydroxyl functional groups can form a lot of reversible hydrogen bonds with the molecular chains of PVA, so the as-prepared hydrogels have a high self-healing efficiency. The best healing efficiency of the composite hydrogels with 2.25 wt% BNNFs reaches as high as 97.31% after self-healing for 30 minutes. The good flexibility of BNNFs is beneficial to the movement of the PVA chain, which is beneficial to the self-healing process of composite hydrogels. The outstanding self-healing performance is very important for the application of composite hydrogels in the biomedical field and wearable flexible devices.

Magnetic Self-Healing Hydrogel from Difunctional Polymers Prepared via the Kabachnik-Fields Reaction

The development of high quality magnetic self-healing hydrogels containing well-dispersed magnetic nanoparticle has been a challenging procedure due to unavailable methods of facilely introducing groups that can efficiently stabilize these magnetic nanoparticles in the self-healing hydrogels. In this research, a polymer containing both phenylboronic acid (PBA) and phosphonic acid (PA) groups has been developed by the Kabachnik-Fields (KF) reaction. This polymer well disperses iron oxide nanoparticles (IONPs) through the strong interactions between the PA groups and the surface of the IONPs; thus, this polymer effectively mixed IONPs and poly(vinyl alcohol) (PVA) to form a hydrogel containing well-dispersed IONPs. The resulting hydrogel is self-healing, owing to the dynamic borate ester linkages. Moreover, the presence of the IONPs endowed the hydrogel with magnetic properties, also making it heat-responsive in an alternating magnetic field and expanding its application as a contrast agent for magnetic resonance imaging. The magnetic self-healing hydrogel showed excellent biosafety properties in animal experiments, suggesting its potential as an injectable implant material for biological and medical applications. This research exploits a biocompatible magnetic self-healing hydrogel with well-dispersed IONPs, demonstrating the value of the KF reaction in the development of functional polymers and smart materials, which might prompt a broad study of multicomponent reactions in interdisciplinary fields.

Development of hydrogels with thermal-healing properties using a network of polyvinyl alcohol and boron nitride composites

The biocompatibility, flexibility, and tissue-like mechanical properties of hydrogels suggest they are promising materials for wearable devices. However, the production of smart, self-healing hydrogels is limited by the unstable structure of load-bearing stressors and the need for long-term healing capacity. An important goal when developing such hydrogels is to improve their mechanical characteristics and rapid ability to self-repair in physiological environments. In this study, we aimed to create a thermo-responsive hydrogel that possessed thermal-healing and enhanced mechanical properties, without losing its self-healing capabilities, by employing two interpenetrating cross-linked networks of polyvinyl alcohol (PVA) and boron nitride nanosheets (BNNSs). We observed that addition of BNNSs significantly increased the glass transition temperature (T_g) and temperature-dependent swelling of PVA hydrogels, indicating a high compatibility between these two materials and a high thermal response to external stimuli. Our results suggest that PVA hydrogels combined with BNNSs outperform single-network PVA hydrogels in terms of thermal-healing capacity. As above T_g, the thermal energy gained during moisture loss leads to an increase in the thermal mobility of the polymer chains and in the free volume available for new hydrogen bonds at the fracture surface. This unique structure increases water content and confers better mechanical properties. Interestingly, this structure of the second network benefits the first PVA network during deformation by effectively dissipating energy and bearing force, and contrarily to single-network PVA hydrogels. Taken together, our results show that combining PVA and BNNSs to create a hybrid structure, exerts a synergistic effect and successfully improves the thermal-healing performance of wet hydrogels.

The Rheological Studies on Poly(vinyl) Alcohol-Based Hydrogel Magnetorheological Plastomer

The freezing-thawing method has been commonly used in the preparation of polyvinyl alcohol hydrogel magnetorheological plastomer (PVA HMRP). However, this method is complex and time consuming as it requires high energy consumption and precise temperature control. In this study, PVA HMRP was prepared using a chemically crosslinked method, where borax is used as crosslinking agent capable of changing the rheological properties of the material. Three samples of PVA HMRP with various contents of carbonyl iron particles (CIPs) (50, 60, and 70 wt.%) were used to investigate their rheological properties in both steady shear and dynamic oscillation modes. Results showed the occurrence of shear thickening behaviour at low shear rate (γ > 1 s^-1), where the viscosity increased with the increased of shear rate. Moreover, the storage modulus of the samples also increased increasing the oscillation frequency from 0.1 to 100 Hz. Interestingly, the samples with 50, 60 70 wt.% of CIPs produced large relative magnetorheological (MR) effects at 4916%, 6165%, and 10,794%, respectively. Therefore, the inclusion of borax to the PVA HMRP can offer solutions for a wide range of applications, especially in artificial muscle, soft actuators, and biomedical sensors.

Rapidly self-healing, magnetically controllable, stretchable, smart, moldable nanoparticle composite gel

Attributed to a combination of healing properties, a magnetic gel shows rapid self-healing, magnetically controllable, stretchable, smart and moldable properties.

Adhesive Tough Magnetic Hydrogels with High Fe3O4 Content

Magnetic hydrogels have promising applications in flexible electronics, biomedical devices, and soft robotics. However, most existing magnetic hydrogels are fragile and suffer insufficient magnetic response. In this paper, we present a new approach to fabricate a strong, tough, and adhesive magnetic hydrogel with nontoxic polyacrylamide (PAAm) hydrogel as the matrix and the functional additive [3-(trimethoxysilyl)propyl methacrylate coated Fe₃O₄] as the inclusions. This magnetic hydrogel not only offers a relatively high modulus and toughness compared to the pure hydrogel but also responds to the magnetic field rapidly because of high magnetic particle content (up to 60%, with respect to the total weight of the polymers and water). The hydrogel can be bonded to hydroxyl-rich hard and soft surfaces. Magnetic hydrogel with polydimethylsiloxane (PDMS) coating exhibits excellent underwater performance. The bonding between magnetic hydrogel and PDMS is very stable even under cyclic loading. An artificial muscle and its magnetomechanical coupling performance are demonstrated using this hydrogel. The adhesive tough magnetic hydrogel will open up extensive applications in many fields, such as controlled drug delivery systems, coating of soft devices, and microfluidics. The strategy is applicable to other functional soft materials.

Near infrared photothermal-responsive poly(vinyl alcohol)/black phosphorus composite hydrogels with excellent on-demand drug release capacity

Novel PVA/pBP hydrogels with highly effective NIR-responsive drug release performance, robust mechanical properties and good biocompatibility were prepared.

New composite thixotropic hydrogel composed of a polymer hydrogelator and a nanosheet

A composite gel composed of a water-soluble aromatic polyamide hydrogelator and the nanosheet Laponite®, a synthetic layered silicate, was produced and found to exhibit thixotropic behaviour. Whereas the composite gel contains the gelator at the same concentration as the molecular gel made by the gelator only, the composite gel becomes a softer thixotropic gel compared to the molecular gel made by the gelator only. The reason for this could be that bundles of polymer gelator may be loosened and the density of the polymer network increased in the presence of Laponite.