Mesoporous self-assembled nanoparticles of biotransesterified cyclodextrins and nonlamellar lipids as carriers of water-insoluble substances

Enhancing Systemic Translocation of Insecticides via Nanoformulations Incorporating β-Cyclodextrin Octadecarboxylate as a Carrier

The conversion of contact-killing pesticides into systemic pesticides can significantly enhance the bioavailability of pesticides, thereby reducing pesticide usage and environmental harm. A series of β-cyclodextrin fatty acid esters with varying branch chains were synthesized and employed as carriers in nanoformulation of insecticide. The investigation revealed that nanoformulations prepared using β-cyclodextrin octadecarboxylate (β-CDs) exhibited superior stability and remarkable systemic translocation within plants. Six contact-killing insecticide nanoformulations were developed utilizing β-CDs as carriers, and tests indicated that β-CDs significantly enhanced the systemic translocation of insecticides in plants compared to carrier-free nanoformulations. It was found that β-CDs increased the level of systemic translocation of insecticides by 5-12 times. Additionally, characterization results from λ-cyhalothrin-β-CDs nanoformulation demonstrated their superior ability to improve photolysis resistance, prolong release time, and extend insecticidal duration. Consequently, β-CDs can be utilized as a green additive in pesticide production to enhance the systemic translocation of pesticides in plants and increase their bioavailability.

Physically and Chemically Compartmentalized Polymersomes for Programmed Delivery and Biological Applications

Multicompartment polymersomes (MCPs) refer to polymersomes that not only contain one single compartment, either in the membrane or in the internal cavity, but also mimic the compartmentalized structure of living cells, attracting much attention in programmed delivery and biological applications. The investigation of MCPs may promote the application of soft nanomaterials in biomedicine. This Review seeks to highlight the recent advances of the design principles, synthetic strategies, and biomedical applications of MCPs. The compartmentalization types including chemical, physical, and hybrid compartmentalization are discussed. Subsequently, the design and controlled synthesis of MCPs by the self-assembly of amphiphilic polymers, double emulsification, coprecipitation, microfluidics and particle assembly, etc. are summarized. Furthermore, the diverse applications of MCPs in programmed delivery of various cargoes and biological applications including cancer therapy, antimicrobials, and regulation of blood glucose levels are highlighted. Finally, future perspectives of MCPs from the aspects of controlled synthesis and applications are proposed.

Mass Spectrometry of Esterified Cyclodextrins

Cyclodextrins are cyclic oligosaccharides that have received special attention due to their cavity-based structural architecture that imbues them with outstanding properties, primarily related to their capacity to host various guest molecules, from low-molecular-mass compounds to polymers. Cyclodextrin derivatization has been always accompanied by the development of characterization methods, able to unfold complicated structures with increasing precision. One of the important leaps forward is represented by mass spectrometry techniques with soft ionization, mainly matrix-assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI). In this context, esterified cyclodextrins (ECDs) benefited also from the formidable input of structural knowledge, thus allowing the understanding of the structural impact of reaction parameters on the obtained products, especially for the ring-opening oligomerization of cyclic esters. The current review envisages the common mass spectrometry approaches such as direct MALDI MS or ESI MS analysis, hyphenated liquid chromatography-mass spectrometry, and tandem mass spectrometry, employed for unraveling the structural features and particular processes associated with ECDs. Thus, the accurate description of complex architectures, advances in the gas phase fragmentation processes, assessment of secondary reactions, and reaction kinetics are discussed in addition to typical molecular mass measurements.

Cross-Linked Lyotropic Liquid Crystal Particles Functionalized with Antimicrobial Peptides

Antimicrobial peptides (AMPs) are promising alternatives to traditional antibiotics for addressing bacterial infections - including life-threatening antibiotic resistant infections. AMPs have a broad spectrum of antimicrobial activity and show a low probability to induce resistance. However, the poor serum stability of AMPs has limited their usage in clinical treatment. To enable improved serum stability while maintaining high antibacterial effect of AMPs, this study describes a material wherein AMPs are covalently bonded to micro-sized particles of cross-linked lyotropic liquid crystals, formed by the self-assembly of the block copolymer Pluronic F-127. The liquid crystal particles were shown to have antibacterial effect corresponding to a 4 log reduction against Staphylococcus aureus. The particles were structurally and chemically analyzed by small angle X-ray scattering, Fourier transform infra-red spectroscopy and Raman spectroscopy, confirming that the liquid crystal structure was maintained within the particles with the AMPs covalently bonded. The bonding to the particles gave the AMPs improved stability in serum, as they retained almost all of the antibacterial potency for 2 days compared to free AMPs, which lost all of its antibacterial potency within a day. Furthermore, insight regarding mode of action was obtained by cryogenic transmission electron microscopy, which showed the antimicrobial particles interacting with the surface of bacteria.

Insights on Development Aspects of Polymeric Nanocarriers: The Translation from Bench to Clinic

Scientists are focusing immense attention on polymeric nanocarriers as a prominent delivery vehicle for several biomedical applications including diagnosis of diseases, delivery of therapeutic agents, peptides, proteins, genes, siRNA, and vaccines due to their exciting physicochemical characteristics which circumvent degradation of unstable drugs, reduce toxic side effects through controlled release, and improve bioavailability. Polymers-based nanocarriers offer numerous benefits for in vivo drug delivery such as biocompatibility, biodegradability, non-immunogenicity, active drug targeting via surface modification, and controlled release due to their pH—and thermosensitive characteristics. Despite their potential for medicinal use, regulatory approval has been achieved for just a few. In this review, we discuss the historical development of polymers starting from their initial design to their evolution as nanocarriers for therapeutic delivery of drugs, peptides, and genes. The review article also expresses the applications of polymeric nanocarriers in the pharmaceutical and medical industry with a special emphasis on oral, ocular, parenteral, and topical application of drugs, peptides, and genes over the last two decades. The review further examines the practical, regulatory, and clinical considerations of the polymeric nanocarriers, their safety issues, and directinos for future research.

Cubosomes as an emerging platform for drug delivery: a state-of-the-art review

Lipid-based drug delivery nanoparticles, including non-lamellar type, mesophasic nanostructured materials of lyotropic liquid crystals (LLCs), have been a topic of interest for researchers for their applications in encapsulation of drugs...

Cochleate drug delivery systems: An approach to their characterization

Cochleate systems formed from phospholipids have very useful properties as drug delivery systems with sustained release capabilities, which are able to improve bioavailability and efficacy, reduce toxicity and increase the shelf-life of encapsulated molecules. These nanometric or micrometric structures are usually obtained after interaction of negatively charged liposomes with a positively charged bridging agent. Many different methods are now available to prepare cochleates and there are also numerous techniques that can be used to characterize them, some of which can be easily applied while others require more sophisticated equipment or analysis. The present review describes the important features of this drug delivery system; including their structural properties and potential applications, as well as a brief account of methods for their preparation and an extensive description of the techniques used for their characterization. This information could guide formulators in their choice of methods of characterization that would be best suited to their needs in terms of time, precision and technological difficulty.

Evaluation of nanoscaled dual targeting drug-loaded liposomes on inhibiting vasculogenic mimicry channels of brain glioma

Brain glioma is the most common primary tumour of the central nervous system. Complete surgical removal of the brain glioma is virtually impossible. Chemotherapy is still an important treatment for brain glioma. However, blood-brain barrier (BBB) and vasculogenic mimicry (VM) channels remain two hindrances in regular treatments. Herein, we developed a novel nanoscaled dual targeting daunorubicin plus rofecoxib liposomes which could transport across the BBB, and eliminate brain glioma cells along with the VM channels. The liposomes were modified with two functional materials, and showed round in shape with a diameter about 120 nm. Evaluations were performed on human brain glioma U87MG cells in vitro and on intracranial brain glioma-bearing nude mice. The dual targeting liposomes demonstrated a long circulatory effect in the blood system, were able to transport across the BBB, and were accumulated into the brain. The results indicated that the dual targeting daunorubicin plus rofecoxib liposomes could inhibit the brain glioma VM channels and exhibited a significant efficacy in the treatment of intracranial glioma-bearing nude mice. The mechanisms are related to down regulations MMP-2, MMP-9, FAK and HIF-α. Hence, the established dual targeting liposomes could be a potential formulation to treat the brain glioma along with eliminating VM channels.

Microencapsulation of Coenzyme Q10 and bile acids using ionic gelation vibrational jet flow technology for oral delivery

Developing new delivery dosage forms with robust delivery and safety profiles remains a challenge to the pharmaceutical industry in terms of optimum gut absorption, consistent dosing and bioavailability; particularly for orally administered drugs that are poorly water soluble. Coenzyme Q10 is an example of a poorly water-soluble compound with low bioavailability, and significant inter-individual variation after oral administration; limiting its optimum efficacy, as a powerful antioxidant with significant promise in treating hearing disorders. Microencapsulation technology is one way to optimize drug bioavailability and absorption profile. One example is Ionic Gelation Vibrational Jet Flow techniques, using new encapsulating parameters to determine the nature of formed capsules. Bile acids are an example of an excipient that can be used to improve membrane permeability; and will be examined. This review addresses the applications of microencapsulation technology on oral delivery and efficacy profiles of poorly water-soluble drugs, focusing on Coenzyme Q10.

Inclusion Complexes of Concentrated Orange Oils and β-Cyclodextrin: Physicochemical and Biological Characterizations

Concentrated orange oils (5x, 10x, 20x) are ingredients used in different industries as components of flavors and aromas due to their great organoleptic qualities. This research focuses on the search for alternative uses for their application through encapsulation in inclusion complexes with β-cyclodextrin (β-CD). Inclusion complexes of concentrated orange oils (COEO) and β-CD were developed by the co-precipitated method in ratios of 4:96, 12:88, and 16:84 (w/w, COEO: β-CD). The best powder recovery was in the ratio 16:84 for the three oils, with values between 82% and 84.8%. The 20x oil in relation 12:88 showed the highest entrapment efficiency (89.5%) with 102.3 mg/g of β-CD. The FT-IR analysis may suggest an interaction between the oil and the β-CD. The best antioxidant activity was observed in the ratio 12:88 for the three oils. The antifungal activity was determined for all the inclusion complexes, and the 10x fraction showed the highest inhibition at a concentration of 10 mg/mL in ratios 12:88 and 16:84. Antibacterial activity was determined by the minimum inhibitory concentration (MIC) and was found at a concentration of 1.25 mg/mL in ratios 12:88 and 16:84 for 5x and 20x oils.

Liquid crystalline nanoparticles for drug delivery: The role of gradient and block copolymers on the morphology, internal organisation and release profile

Amphiphilic polymers represent one of the main class of stabilizers for non-lamellar lyotropic liquid crystalline nanoparticles, being essential for their formation and stability. In the present study, poly(ethylene oxide)-block-poly(ε-caprolactone) (PEO-b-PCL) block copolymers and poly(2-methyl-2-oxazoline)-grad-poly(2-phenyl-2-oxazoline) (MPOx) gradient copolymers were incorporated as stabilizers in liquid crystalline nanoparticles prepared from glyceryl monooleate. The polymers were chosen according to their high biocompatibility and promising stealth properties, in order to develop safe and efficient drug delivery nanosystems. The physicochemical characteristics and fractal dimension of the resultant nanosystems were obtained from light scattering techniques, while their micropolarity and microfluidity from fluorescence spectroscopy. The effect of temperature, serum proteins and ionic strength on the physicochemical behavior was monitored. Their morphology was assessed by cryo-TEM, while their thermal behavior by microcalorimetry and high-resolution ultrasound spectroscopy. Their properties were dependent on the stabilizer chemistry and topology (block/gradient copolymer) and its concentration. Subsequently, resveratrol, as model hydrophobic drug, was loaded into the nanosystems, the entrapment efficiency was calculated and in vitro release studies were carried out, highlighting how the different stabilizer can differentiate the drug release profile. In conclusion, the proposed copolymers broaden the toolbox of polymeric stabilizers for the development of liquid crystalline nanoparticles intended for drug delivery applications.

Self-assembly of mitochondria-specific peptide amphiphiles amplifying lung cancer cell death through targeting the VDAC1-hexokinase-II complex

Mitochondria-targeting peptides represent an emergent tool for cancer inhibition. Here supramolecular assemblies of novel amphiphilic cell-penetrating peptides for targeting cancer cell mitochondria are reported. The employed strategy aims at amplifying the apoptotic stimuli by weakening the mitochondrial VDAC1 (voltage-dependent anion channel-1)-hexokinase-II (HK-II) interaction. Peptide engineering is performed with the N-terminus of the HK-II protein, which binds to VDAC1. First, a designed positively charged segment (pKV) is anchored to the specific 15 amino acid sequence (MIASHLLAYFFTELN) to yield a cell-penetrating peptide (pHK-pKV). Second, a lipid chain (Pal) is conjugated to the N-terminus of pHK-pKV in order to enhance the intracellular delivery of the HK-II scaffold. The self-assembly properties of these two synthetic peptides are investigated by synchrotron small-angle X-ray scattering (BioSAXS) and cryogenic transmission electron (cryo-TEM) imaging, which evidence the formation of nanoassemblies of ellipsoid-like shapes. Circular dichroism (CD) spectroscopy demonstrates the induction of partial α-helical structures in the amphiphilic peptides. Confocal microscopy reveals the specific mitochondrial location of Pal-pHK-pKV assemblies in human non-small cell lung cancer (NSCLC) A549 cells. The cytotoxicity and apoptotic studies indicate the enhanced bioactivity of Pal-pHK-pKV self-assembled reservoirs, which cause massive A549 cell death with regard to pHK-pKV. Of significance, Pal-pHK-pKV treatment of non-cancerous NCM460 cells resulted in substantially lower cytotoxicity. The results demonstrate the potential of self-assembled lipo-peptide (HK-II-derived) conjugates as a promising strategy in cancer therapy.

Biomimetic self-assembly of subcellular structures

This article summarizes recent progress on biomimetic subcellular structures and discusses integration of these isolated systems.

Comparison of bulk and microfluidic methods to monitor the phase behaviour of nanoparticles during digestion of lipid-based drug formulations using in situ X-ray scattering

The performance of orally administered lipid-based drug formulations is crucially dependent on digestion, and understanding the colloidal structures formed during digestion is necessary for rational formulation design. Previous studies using the established bulk pH-stat approach (Hong et al. 2015), coupled to synchrotron small angle X-ray scattering (SAXS), have begun to shed light on this subject. Such studies of digestion using in situ SAXS measurements are complex and have limitations regarding the resolution of intermediate structures. Using a microfluidic device, the digestion of lipid systems may be monitored with far better control over the mixing of the components and the application of enzyme, thereby elucidating a finer understanding of the structural progression of these lipid systems. This work compares a simple T-junction microcapillary device and a custom-built microfluidic chip featuring hydrodynamic flow focusing, with an equivalent experiment with the full scale pH-stat approach. Both microfluidic devices were found to be suitable for in situ SAXS measurements in tracking the kinetics with improved time and signal sensitivity compared to other microfluidic devices studying similar lipid-based systems, and producing more consistent and controllable structural transformations. Particle sizing of the nanoparticles produced in the microfluidic devices were more consistent than the pH-stat approach.

pH Responsiveness of Hexosomes and Cubosomes for Combined Delivery of Brucea javanica Oil and Doxorubicin

We report pH-responsive liquid crystalline lipid nanoparticles, which are dual-loaded by Brucea javanica oil (BJO) and doxorubicin hydrochloride (DOX) and display a pH-induced inverted hexagonal (pH = 7.4) to cubic (pH = 6.8) to emulsified microemulsion (pH = 5.3) phase transition with a therapeutic application in cancer inhibition. BJO is a traditional herbal medicine that strongly inhibits the proliferation and metastasis of various cancers. Doxorubicin is an antitumor drug, which prevents DNA replication and hampers protein synthesis through intercalation between the base pairs of the DNA helices. Its dose-dependent cardiotoxicity imposes the need for safe delivery carriers. Here, pH-induced changes in the structural and interfacial properties of designed multicomponent drug delivery (monoolein-oleic acid-BJO-DOX) systems are determined by synchrotron small-angle X-ray scattering and the Langmuir film balance technique. The nanocarrier assemblies display good physical stability in the studied pH range and adequate particle sizes and ζ-potentials. Their interaction with model lipid membrane interfaces is enhanced under acidic pH conditions, which mimic the microenvironment around tumor cells. In vitro cytotoxicity and apoptosis studies with BJO-DOX dual-loaded pH-switchable liquid crystalline nanoparticles are performed on the human breast cancer Michigan Cancer Foundation-7 (MCF-7) cell line and MCF-7 cells with doxorubicin resistance (MCF-7/DOX), respectively. The obtained pH-sensitive nanomedicines exhibit enhanced antitumor efficacy. The performed preliminary studies suggest a potential reversal of the resistance of the MCF-7/DOX cells to DOX. These results highlight the necessity for further understanding the link between the established pH-dependent drug release profiles of the nanocarriers and the role of their pH-switchable inverted hexagonal, bicontinuous cubic, and emulsified microemulsion inner organizations for therapeutic outcomes.

Effects of electrically-induced constant tension on giant unilamellar vesicles using irreversible electroporation

Stretching in membranes of cells and vesicles plays important roles in various physiological and physicochemical phenomena. Irreversible electroporation (IRE) is the irreversible permeabilization of the membrane through the application of a series of electrical field pulses of micro- to millisecond duration. IRE induces lateral tension due to stretching in the membranes of giant unilamellar vesicles (GUVs). However, the effects of electrically induced (i.e., IRE) constant tension in the membranes of GUVs have not been investigated yet in detail. To explore the effects of electrically induced tension on GUVs, firstly a microcontroller-based IRE technique is developed which produces electric field pulses (332 V/cm) with pulse width 200 µs. Then the electrodeformation, electrofusion and membrane rupture of GUVs are investigated at various constant tensions in which the membranes of GUVs are composed of dioleoylphosphatidylglycerol (DOPG) and dioleoylphosphatidylcholine (DOPC). Stochastic electropore formation is observed in the membranes at an electrically induced constant tension in which the probability of pore formation is increased with the increase of tension from 2.5 to 7.0 mN/m. The results of pore formation at different electrically-induced constant tensions are in agreement with those reported for mechanically-induced constant tension. The decrease in the energy barrier of the pre-pore state due to the increase of electrically-induced tension is the main factor increasing the probability of electropore formation. These investigations help to provide an understanding of the complex behavior of cells/vesicles in electric field pulses and can form the basis for practical applications in biomedical technology.

Combination of targeted daunorubicin liposomes and targeted emodin liposomes for treatment of invasive breast cancer

Conventional treatment fails to completely eliminate highly invasive breast cancer cells, and most surviving breast cancer cells tend to reproliferate and metastasize by forming vasculogenic mimicry (VM) channels. Thus, a type of targeted liposomes was developed by modification with arginine₈-glycine-aspartic acid (R₈GD) to encapsulate daunorubicin and emodin separately. A combination of the two targeted liposomes was then developed to destroy VM channels and inhibit tumour metastasis. MDA-MB-435S cells, a highly invasive breast cancer, were then evaluated in vitro and in mice. The experiments indicated that R₈GD modified daunorubicin liposomes plus R₈GD modified emodin liposomes had small particle size, uniform particle size distribution and high drug encapsulation rate. The combination of the two targeted liposomes exerted strong toxicity on the MDA-MB-435S cells and effectively inhibited the formation of VM channels and the metastasis of tumour cells. Action mechanism studies showed that the R₈GD modified daunorubicin liposomes plus R₈GD modified emodin liposomes could downregulate some metastasis-related proteins, including MMP-2, VE-cad, TGF-β1 and HIF-1α. These studies also demonstrated that the targeted liposomes allowed the chemotherapeutic drug to selectively accumulate at tumour site, thus exhibiting a distinct antitumor effect. Therefore, the combination of targeted daunorubicin liposomes and targeted emodin liposomes can provide a potential treatment for invasive breast cancer.

Probing cell-nanoparticle (cubosome) interactions at the endothelial interface: do tissue dimension and flow matter?

In the research field of nanostructured systems for biomedical applications, increasing attention has been paid to using biomimetic, dynamic cellular models to adequately predict their bio-nano behaviours. This work specifically evaluates the biointeractions of nanostructured lipid-based particles (cubosomes) with human vascular cells from the aspects of tissue dimension (conventional 2D well plate versus 3D dynamic tubular vasculature) and shear flow effect (static, venous and arterial flow-mimicking conditions). A glass capillary-hosted, 3D tubular endothelial construct was coupled with circulating luminal fluid flow to simulate the human vascular systems. In the absence of fluid flow, the degree of cell-cubosome association was not significantly different between the 2D planar and the 3D tubular systems. Under flow conditions simulating venous (0.8 dynes per cm²) and arterial (10 dynes per cm²) shear stresses, the cell-cubosome association notably declined by 50% and 98%, respectively. This highlights the significance of shear-guided biointeractions of non-targeted nanoparticles in the circulation. Across all 2D and 3D cellular models with and without flow, cubosomes had little effect on the cell-cell contact based on the unchanged immunoexpression of the endothelial-specific intercellular junction marker PECAM-1. Interestingly, there were dissimilar nanoparticle distribution patterns between the 2D planar (showing discrete punctate staining) and the 3D tubular endothelium (with a more diffused, patchy fashion). Taken together, these findings highlight the importance of tissue dimension and shear flow in governing the magnitude and feature of cell-nanoparticle interactions.

Therapeutic effect of Brucea javanica oil emulsion on experimental Crohn's disease in rats: Involvement of TLR4/ NF-κB signaling pathway

Brucea javanica is an important Chinese folk medicine traditionally used for the treatment of dysentery (also known as inflammatory bowel diseases). Brucea javanica oil emulsion (BJOE), the most common preparation of Brucea javanica, has a variety of pharmacological activities. In this follow-up investigation, we endeavored to illuminate the potential benefit of BJOE on 2, 4, 6-trinitrobenzenesulfonic acid (TNBS)-induced Crohn's disease (CD) in rats and decipher the mechanism of action. The result illustrated that BJOE treatment significantly reduced the body weight loss, disease activity index and macroscopic scores, ameliorated shortening of colon length, arrested colonic histopathological deteriorations, lowered the histological scores in parallel to the model group. Furthermore, BJOE also decreased the levels of MPO and pro-inflammatory cytokines (TNF-α, IL-1β, IL-6, IL-17, IL-23 and IFN-γ), and increased the levels of anti-inflammatory cytokines (IL-4, IL-10 and TGF-β) as compared with the model group. In addition, the elevated mRNA expression of MMP-1, MMP-3 and RAGE induced by TNBS was remarkably inhibited by BJOE, SASP or AZA treatments, while the mRNA expression of PPAR-γ was significantly enhanced. Furthermore, the activation of TLR4/NF-κB signaling pathway was significantly inhibited by AZA and BJOE treatment when compared with that of TNBS-treated rats. Our study suggested that BJOE exerted superior therapeutic effect to SASP and AZA in treating TNBS-induced colitis in rats. The protective effect of BJOE may involve the inhibition of the TLR4/NF-κB-mediated inflammatory responses. These results indicated that BJOE held promising potential to be further developed into a novel candidate for the treatment of CD.

Controlling the Self-Assembly of Biomolecules into Functional Nanomaterials through Internal Interactions and External Stimulations: A Review

Biomolecular self-assembly provides a facile way to synthesize functional nanomaterials. Due to the unique structure and functions of biomolecules, the created biological nanomaterials via biomolecular self-assembly have a wide range of applications, from materials science to biomedical engineering, tissue engineering, nanotechnology, and analytical science. In this review, we present recent advances in the synthesis of biological nanomaterials by controlling the biomolecular self-assembly from adjusting internal interactions and external stimulations. The self-assembly mechanisms of biomolecules (DNA, protein, peptide, virus, enzyme, metabolites, lipid, cholesterol, and others) related to various internal interactions, including hydrogen bonds, electrostatic interactions, hydrophobic interactions, π⁻π stacking, DNA base pairing, and ligand⁻receptor binding, are discussed by analyzing some recent studies. In addition, some strategies for promoting biomolecular self-assembly via external stimulations, such as adjusting the solution conditions (pH, temperature, ionic strength), adding organics, nanoparticles, or enzymes, and applying external light stimulation to the self-assembly systems, are demonstrated. We hope that this overview will be helpful for readers to understand the self-assembly mechanisms and strategies of biomolecules and to design and develop new biological nanostructures or nanomaterials for desired applications.

Vesicular self-assembly of a natural ursane-type dihydroxy-triterpenoid corosolic acid

Corosolic acid, a natural ursane-type 6-6-6-6-6 pentacyclic dihydroxy triterpenic acid, is a well known antidiabetic compound extractable from leaves of Psidium guajava. In this manuscript we have reported the self-assembly properties of corosolic acid in different liquids. The compound undergoes self-assembly to give vesicular morphology in different aqueous organic liquids. Supramolecular gels were also obtained in some aqueous binary liquids such as ethanol–water and dimethyl formamide–water. The morphology of the self-assemblies of corosolic acid were characterized by using different microscopic techniques like optical microscopy, field emission scanning electron microscopy, transmission electron microscopy, atomic force microscopy as well as XRD and FTIR studies. We also demonstrated the application of vesicular self-assemblies for the entrapment and release of fluorophores including an anticancer drug.

Corosolic acid, a natural ursane-type 6-6-6-6-6 pentacyclic dihydroxy triterpenic acid, self-assembled in binary liquid mixtures yielding vesicles.

Phenylboronic acid-modified polyamidoamine-mediated delivery of short GC rich DNA for hepatocarcinoma gene therapy

Phenylboronic acid was introduced on the surface of polyamidoamine to construct a derivative PP, which was further used as a tumor-targeting carrier for realizing the delivery of short GC rich DNA (GCD).

Peripheral nerve targeting by procaine-conjugated ribavirin-loaded dual drug nanovesicle

AIM

Procaine that is able to reach the peripheral nervous system (PNS) was conjugated as a ligand with lipid nanovesicle and loaded with ribavirin (a broad spectrum antiviral drug incapable of entering the PNS on its own) to target the PNS with a dual-drug effect.

MATERIALS & METHODS

Different physicochemical characterizations, γ-scintigraphy and electromyography of the developed nanovesicle were conducted.

RESULTS

Marked capability of the optimized radiolabeled formulation to target PNS was observed in rats. Electromyography signals were reduced after treatment with the formulation on conscious rats.

CONCLUSION

The developed nanocarrier can deliver drug successfully at the PNS and reduce excitation of the nerve and thus give a better therapeutic option for treatment of various diseases and disorders of the PNS.

Amphiphilic Nanocarrier Systems for Curcumin Delivery in Neurodegenerative Disorders

Neurodegenerative diseases have become a major challenge for public health because of their incurable status. Soft nanotechnology provides potential for slowing down the progression of neurodegenerative disorders by using innovative formulations of neuroprotective antioxidants like curcumin, resveratrol, vitamin E, rosmarinic acid, 7,8-dihydroxyflavone, coenzyme Q10, and fish oil. Curcumin is a natural, liposoluble compound, which is of considerable interest for nanomedicine development in combination therapies. The neuroprotective effects of combination treatments can involve restorative mechanisms against oxidative stress, mitochondrial dysfunction, inflammation, and protein aggregation. Despite the anti-amyloid and anti-tau potential of curcumin and its neurogenesis-stimulating properties, the utilization of this antioxidant as a drug in neuroregenerative therapies has huge limitations due to its poor water solubility, physico-chemical instability, and low oral bioavailability. We highlight the developments of soft lipid- and polymer-based delivery carriers of curcumin, which help improve the drug solubility and stability. We specifically focus on amphiphilic liquid crystalline nanocarriers (cubosome, hexosome, spongosome, and liposome particles) for the encapsulation of curcumin with the purpose of halting the progressive neuronal loss in Alzheimer's, Parkinson's, and Huntington's diseases and amyotrophic lateral sclerosis (ALS).

Construction and Characterization of a Novel Sustained-Release Delivery System for Hydrophobic Pesticides Using Biodegradable Polydopamine-Based Microcapsules

Microcapsule formulations have been highly desirable and widely developed for effective utilization of pesticides and environmental pollution reduction. However, commercial and traditional microcapsule formulations of λ-cyhalothrin (LC) were prepared by complicated synthesis procedures and thereby specific organic solvents were needed. In this work, LC was encapsulated into versatile, robust, and biodegradable polydopamine (PDA) microcapsules by self-polymerization of dopamine. LC-loaded PDA microcapsules were characterized by transmission electron microscopy (TEM), small-angle X-ray scattering (SAXS), and thermogravimetric analysis measurements (TGA). LC-loaded PDA microcapsules have uniform morphology with nanoscale, decent LC loading content (>50.0% w/w), and good physicochemical stability and sustained release properties. The bioassay against housefly ( Musca domestica) showed that the bioactivity and long-term efficiency of LC-loaded PDA microcapsules was superior to that of the commercial formulation. All of these results demonstrated that LC-loaded PDA microcapsules could be applied as a commercial LC microcapsule formulation with fewer environmental side effects and higher effective delivery.

Polyhexamethylene Biguanide and Nadifloxacin Self-Assembled Nanoparticles: Antimicrobial Effects against Intracellular Methicillin-Resistant Staphylococcus aureus

The treatment of skin and soft tissue infections caused by methicillin-resistant Staphylococcus aureus (MRSA) remains a challenge, partly due to localization of the bacteria inside the host’s cells, where antimicrobial penetration and efficacy is limited. We formulated the cationic polymer polyhexamethylene biguanide (PHMB) with the topical antibiotic nadifloxacin and tested the activities against intracellular MRSA in infected keratinocytes. The PHMB/nadifloxacin nanoparticles displayed a size of 291.3 ± 89.6 nm, polydispersity index of 0.35 ± 0.04, zeta potential of +20.2 ± 4.8 mV, and drug encapsulation efficiency of 58.25 ± 3.4%. The nanoparticles killed intracellular MRSA, and relative to free polymer or drugs used separately or together, the nanoparticles displayed reduced toxicity and improved host cell recovery. Together, these findings show that PHMB/nadifloxacin nanoparticles are effective against intracellular bacteria and could be further developed for the treatment of skin and soft tissue infections.

Chemistry and engineering of cyclodextrins for molecular imaging

Cyclodextrins (CDs) are naturally occurring cyclic oligosaccharides bearing a basket-shaped topology with an "inner-outer" amphiphilic character. The abundance of hydroxyl groups enables CDs to be functionalized with multiple targeting ligands and imaging elements. The imaging time, and the payload of different imaging elements, can be tuned by taking advantage of the commercial availability of CDs with different sizes of the cavity. This review aims to offer an outlook of the chemistry and engineering of CDs for the development of molecular probes. Complexation thermodynamics of CDs, and the corresponding implications for probe design, are also presented with examples demonstrating the structural and physiochemical roles played by CDs in the full ambit of molecular imaging. We hope that this review not only offers a synopsis of the current development of CD-based molecular probes, but can also facilitate translation of the incremental advancements from the laboratory to real biomedical applications by illuminating opportunities and challenges for future research.

Liquid Crystalline Nanostructures as PEGylated Reservoirs of Omega-3 Polyunsaturated Fatty Acids: Structural Insights toward Delivery Formulations against Neurodegenerative Disorders

Omega-3 polyunsaturated fatty acids (ω-3 PUFAs) are bioactive lipids with considerable impact in medicine and nutrition. These compounds exert structuring effects on the cellular membrane organization, regulate the gene expression, and modulate various signaling cascades and metabolic processes. The purpose of the present work is to demonstrate the structural features of ω-3 PUFA-containing three-dimensional supramolecular lipid assemblies suitable for pharmaceutical applications that require soft porous carriers. We investigate the liquid crystalline structures formed upon mixing of eicosapentaenoic acid (EPA, 20:5) with the lyotropic nonlamellar lipid monoolein and the formation of multicompartment assemblies. Starting with the monoolein-based lipid cubic phase, double membrane vesicles, cubosome precursors, sponge-type particles (spongosomes), mixed intermediate nonlamellar structures, and multicompartment assemblies are obtained through self-assembly at different amphiphilic compositions. The dispersions containing spongosomes as well as nanocarriers with oil and vesicular compartments are stabilized by PEGylation of the lipid/water interfaces using a phospholipid with a poly(ethylene glycol) chain. The microstructures of the bulk mixtures were examined by cross-polarized light optical microscopy. The dispersed liquid crystalline structures and intermediate states were studied by small-angle X-ray scattering, cryogenic transmission electron microscopy, and quasielastic light scattering techniques. They established that PUFA influences the phase type and the sizes of the aqueous compartments of the liquid crystalline carriers. The resulting multicompartment systems and stealth nanosponges may serve as mesoporous reservoirs for coencapsulation of ω-3 PUFA (e.g., EPA) with water-insoluble drugs and hydrophilic macromolecules toward development of combination treatment strategies of neurodegenerative and other diseases.

Synthesis, Self-Assembly, and Drug-Release Properties of New Amphipathic Liquid Crystal Polycarbonates

New amphiphilic liquid crystal (LC) polycarbonate block copolymers containing side-chain cholesteryl units were synthesized. Their structure, thermal stability, and LC phase behavior were characterized with Fourier transform infrared (FT-IR) spectrum, ¹H NMR, gel permeation chromatographic (GPC), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), polarizing optical microscope (POM), and XRD methods. The results demonstrated that the LC copolymers showed a double molecular arrangement of a smectic A phase at room temperature. With the elevating of LC unit content in such LC copolymers, the corresponding properties including decomposition temperature (T_d), glass temperature (T_g), and isotropic temperature (T_i) increased. The LC copolymers showed pH-responsive self-assembly behavior under the weakly acidic condition, and with more side-chain LC units, the self-assembly process was faster, and the formed particle size was smaller. It indicated that the self-assembly driving force was derived from the orientational ability of LC. The particle size and morphologies of self-assembled microspheres loaded with doxorubicin (DOX), together with drug release tracking, were evaluated by dynamic light scattering (DLS), SEM, and UV–vis spectroscopy. The results showed that DOX could be quickly released in a weakly acidic environment due to the pH response of the self-assembled microspheres. This would offer a new strategy for drug delivery in clinic applications.

Lyotropic liquid crystal engineering moving beyond binary compositional space - ordered nanostructured amphiphile self-assembly materials by design

Ordered amphiphile self-assembly materials with a tunable three-dimensional (3D) nanostructure are of fundamental interest, and crucial for progressing several biological and biomedical applications, including in meso membrane protein crystallization, as drug and medical contrast agent delivery vehicles, and as biosensors and biofuel cells. In binary systems consisting of an amphiphile and a solvent, the ability to tune the 3D cubic phase nanostructure, lipid bilayer properties and the lipid mesophase is limited. A move beyond the binary compositional space is therefore required for efficient engineering of the required material properties. In this critical review, the phase transitions upon encapsulation of more than 130 amphiphilic and soluble additives into the bicontinuous lipidic cubic phase under excess hydration are summarized. The data are interpreted using geometric considerations, interfacial curvature, electrostatic interactions, partition coefficients and miscibility of the alkyl chains. The obtained lyotropic liquid crystal engineering design rules can be used to enhance the formulation of self-assembly materials and provides a large library of these materials for use in biomedical applications (242 references).

Preparation of an Environmentally Friendly Formulation of the Insecticide Nicotine Hydrochloride through Encapsulation in Chitosan/Tripolyphosphate Nanoparticles

Insecticide nicotine hydrochloride (NCT) was formulated as nanoparticles composed of chitosan (CS) and sodium tripolyphosphate (TPP) to undermine its adverse impacts on human health and reinforce its physicochemical stability. The study investigated the preparation and characterization of chitosan/tripolyphosphate nanoparticles (CS/TPP NPs) with good encapsulation efficiency (55%), uniform morphology, and physicochemical stability (45 days) through dynamic light scattering (DLS), transmission electron microscopy (TEM), and small-angle X-ray scattering (SAXS) measurements. A bioassay against Musca domestica NCT CS/TPP NPs exhibited good bioactivity and thermal stability. The effect of the monovalent salt (NaCl) on manipulating the formation and size distribution of ionically cross-linked nanoparticles was demonstrated as well. The formulation of NCT CS/TPP NPs could be a utility candidate in public health and agriculture.

Fabrication of surfactant-stabilized nanosuspension of naringenin to surpass its poor physiochemical properties and low oral bioavailability

BACKGROUND

Nanosuspension is a biphasic system consisting of native drug particles dispersed in an aqueous surfactant or polymeric solution with a particle size between 10 to 1000 nm. In contrast to other drug delivery systems, nanosuspension offer the unique advantage of increasing solubility of the native drug resulting into faster drug absorption and hence achieving faster maximum plasma concentration.

HYPOTHESIS/PURPOSE

The present study aims to evaluate surfactants/polymer stabilized nanosuspensions of naringenin (NN), a phytomedicine, to surpass its poor physiochemical properties and low oral bioavailability.

STUDY DESIGN

Optimization and characterization (DLS, SEM, PXRD and DSC) of nanosuspensions followed by in-vitro drug dissolution studies and pharmacokinetic study in male Sprague-Dawley rats were performed.

METHODS

Nanosuspensions were prepared by precipitation-ultrasonication method with varying concentrations of different surfactants and polymer such as sodium cholate (SC), sodium lauryl sulphate (SLS), poly ethylene glycol 4000 (PEG), polysorbate 80 (Tween^® 80), poloxomer-188 and D-α-Tocopherol polyethylene glycol 1000 succinate (TPGS or Vitamin E-TPGS).

RESULTS

Nanosuspension prepared with 0.5% w/v d-α-Tocopherol polyethylene glycol 1000 succinate (TPNS) and 7.5 mg NN, showed the smallest size of 118.1 ± 2.7 nm. TPNS showed increase in drug dissolution in simulated gastric fluid pH 1.2 (SGF) and phosphate buffer pH 6.8 (PB). TPNS demonstrated an improved pharmacokinetic profile compared to pure NN resulting 2.14 and 3.76 folds increase in C_max and AUC, respectively. In addition, TPNS were stable over a period of six months.

CONCLUSION

The developed formulation strategy of nanosuspension could be exploited to improve the solubility and bio-availability of poorly soluble NN and other phytomedicines.

Liquid-crystalline nanoarchitectures for tissue engineering

Hierarchical orders are found throughout all levels of biosystems, from simple biopolymers, subcellular organelles, single cells, and macroscopic tissues to bulky organs. Especially, biological tissues and cells have long been known to exhibit liquid crystal (LC) orders or their structural analogues. Inspired by those native architectures, there has recently been increased interest in research for engineering nanobiomaterials by incorporating LC templates and scaffolds. In this review, we introduce and correlate diverse LC nanoarchitectures with their biological functionalities, in the context of tissue engineering applications. In particular, the tissue-mimicking LC materials with different LC phases and the regenerative potential of hard and soft tissues are summarized. In addition, the multifaceted aspects of LC architectures for developing tissue-engineered products are envisaged. Lastly, a perspective on the opportunities and challenges for applying LC nanoarchitectures in tissue engineering fields is discussed.

Anion-controlled supramolecular crystal structures and ionic liquids from fatty acid-substituted ethyl-nicotinate ionic compounds

A series of bio-inspired fatty acid-substituted ethyl-nicotinate ionic compounds with a flexible ester group were prepared, and two crystals and four ionic liquids were obtained.

Advances in structural design of lipid-based nanoparticle carriers for delivery of macromolecular drugs, phytochemicals and anti-tumor agents

The present work highlights recent achievements in development of nanostructured dispersions and biocolloids for drug delivery applications. We emphasize the key role of biological small-angle X-ray scattering (BioSAXS) investigations for the nanomedicine design. A focus is given on controlled encapsulation of small molecular weight phytochemical drugs in lipid-based nanocarriers as well as on encapsulation of macromolecular siRNA, plasmid DNA, peptide and protein pharmaceuticals in nanostructured nanoparticles that may provide efficient intracellular delivery and triggered drug release. Selected examples of utilisation of the BioSAXS method for characterization of various types of liquid crystalline nanoorganizations (liposome, spongosome, cubosome, hexosome, and nanostructured lipid carriers) are discussed in view of the successful encapsulation and protection of phytochemicals and therapeutic biomolecules in the hydrophobic or the hydrophilic compartments of the nanocarriers. We conclude that the structural design of the nanoparticulate carriers is of crucial importance for the therapeutic outcome and the triggered drug release from biocolloids.

New nanoparticles obtained by co-assembly of amphiphilic cyclodextrins and nonlamellar single-chain lipids: Preparation and characterization

This work aimed at preparing new nanoscale assemblies based on an amphiphilic bio-esterified β-cyclodextrin (β-CD), substituted at the secondary face with n-decanoic fatty acid chains (β-CD-C₁₀), and monoolein (MO) as new carriers for parenteral drug delivery. Stable binary (β-CD-C₁₀/MO) and ternary (β-CD-C₁₀/MO/stabilizer) nanoscale assemblies close to 100nm in size were successfully prepared in water by the solvent displacement method. The generated nanoparticles were fully characterized by dynamic light scattering, transmission electron microscopy, small-angle X-ray scattering, residual solvent analysis, complement activation and the contribution of each formulation parameter was determined by principal component analysis. The β-CD-C₁₀ units were shown to self-organize into nanoparticles with a hexagonal supramolecular packing that was significantly modulated by the molar ratio of the constituents and the presence of a steric or electrostatic stabilizer (DOPE-PEG₂₀₀₀ or DOPA/POPA, respectively). Indeed, nanoparticles differing in morphology and in hexagonal lattice parameters were obtained while the co-existence of multiple mesophases was observed in some formulations, in particular for the β-CD-C₁₀/MO/DOPA and β-CD-C₁₀/MO/POPA systems. The mixed β-CD-C₁₀/MO/DOPE-PEG₂₀₀₀ nanoparticles (49:49:2 in mol%) appeared to be the most suitable for use as a drug delivery system since they contained a very low amount of residual solvent and showed a low level of complement C3 activation.