Bioactive Natural Protein-Hydroxyapatite Nanocarriers for Optimizing Osteogenic Differentiation of Mesenchymal Stem Cells

In vitro/In vivo Evaluations of Hydroxyapatite Nanoparticles with Different Geometry

Purpose

Hydroxyapatite-based nanoparticles have found diverse applications in drug delivery, gene carriers, diagnostics, bioimaging and tissue engineering, owing to their ability to easily enter the bloodstream and target specific sites. However, there is limited understanding of the potential adverse effects and molecular mechanisms of these nanoparticles with varying geometries upon their entry into the bloodstream. Here, we used two commercially available hydroxyapatite nanoparticles (HANPs) with different geometries (less than 100 nm in size each) to investigate this issue.

Methods

First, the particle size, Zeta potential, and surface morphology of nano-hydroxyapatite were characterized. Subsequently, the effects of 2~2000 μM nano-hydroxyapatite on the proliferation, migration, cell cycle distribution, and apoptosis levels of umbilical vein endothelial cells were evaluated. Additionally, the impact of nanoparticles of various shapes on the differential expression of genes was investigated using transcriptome sequencing. Additionally, we investigated the in vivo biocompatibility of HANPs through gavage administration of nanohydroxyapatite in mice.

Results

Our results demonstrate that while rod-shaped HANPs promote proliferation in Human Umbilical Vein Endothelial Cell (HUVEC) monolayers at 200 μM, sphere-shaped HANPs exhibit significant toxicity to these monolayers at the same concentration, inducing apoptosis/necrosis and S-phase cell cycle arrest through inflammation. Additionally, sphere-shaped HANPs enhance SULT1A3 levels relative to rod-shaped HANPs, facilitating chemical carcinogenesis-DNA adduct signaling pathways in HUVEC monolayers. In vivo experiments have shown that while HANPs can influence the number of blood cells and comprehensive metabolic indicators in blood, they do not exhibit significant toxicity.

Conclusion

In conclusion, this study has demonstrated that the geometry and surface area of HANPs significantly affect VEC survival status and proliferation. These findings hold significant implications for the optimization of biomaterials in cell engineering applications.

Guided Bone Regeneration Using Barrier Membrane in Dental Applications

Guided bone regeneration (GBR) is a widely used technique in preclinical and clinical studies due to its predictability. Its main purpose is to prevent the migration of soft tissue into the osseous wound space, while allowing osseous cells to migrate to the site. GBR is classified into two main categories: resorbable and non-resorbable membranes. Resorbable membranes do not require a second surgery but tend to have a short resorption period. Conversely, non-resorbable membranes maintain their mechanical strength and prevent collapse. However, they require removal and are susceptible to membrane exposure. GBR is often used with bone substitute graft materials to fill the defect space and protect the bone graft. The membrane can also undergo various modifications, such as surface modification and biological factor loading, to improve barrier functions and bone regeneration. In addition, bone regeneration is largely related to osteoimmunology, a new field that focuses on the interactions between bone and the immune system. Understanding these interactions can help in developing new treatments for bone diseases and injuries. Overall, GBR has the potential to be a powerful tool in promoting bone regeneration. Further research in this area could lead to advancements in the field of bone healing. This review will highlight resorbable and non-resorbable membranes with cellular responses during bone regeneration, provide insights into immunological response during bone remodeling, and discuss antibacterial features.

Simulation of Cortical and Cancellous Bone to Accelerate Tissue Regeneration

Different tissues have complex anisotropic structures to support biological functions. Mimicking these complex structures in vitro remains a challenge in biomaterials designs in support of tissue regeneration. Here, inspired by different types of silk nanofibers, a composite materials strategy was pursued towards this challenge. A combination of fabrication methods was utilized to achieve separate control of amorphous and beta-sheet rich silk nanofibers in the same solution. Aqueous solutions containing these two structural types of silk nanofibers were then simultaneously treated with an electric field and with ethylene glycol diglycidyl ether (EGDE). Under these conditions, the beta-sheet rich silk nanofibers in the mixture responded to the electric field while the amorphous nanofibers were active in the crosslinking process with the EGDE. As a result, cryogels with anisotropic structures were prepared, including mimics for cortical- and cancellous-like bone biomaterials as a complex osteoinductive niche. In vitro studies revealed that mechanical cues of the cryogels induced osteodifferentiation of stem cells while the anisotropy inside the cryogels influenced immune reactions of macrophages. These bioactive cryogels also stimulated improved bone regeneration in vivo through modulation of inflammation, angiogenesis and osteogenesis responses, suggesting an effective strategy to develop bioactive matrices with complex anisotropic structures beneficial to tissue regeneration.

In vitro and in vivo Evaluation of Folic Acid Modified DOX-Loaded 32P-nHA Nanoparticles in Prostate Cancer Therapy

Background

Prostate cancer (PCa) ranks second in the incidence of all malignancies in male worldwide. The presence of multi-organ metastases and tumor heterogeneity often leads to unsatisfactory outcomes of conventional radiotherapy treatments. This study aimed to develop a novel folate-targeted nanohydroxyapatite (nHA) coupling to deliver adriamycin (Doxorubicin, DOX), ³²P, and ^99mTc simultaneously for the diagnosis and treatment of prostate-specific membrane antigen (PSMA) positive prostate cancer.

Methods

The spherical nHA was prepared by the biomimetic method and characterized. Folic acid (FA) was coupled to nHA with polyethylene glycol (PEG), and the grafting ratio of PEG-nHA and FA-PEG-nHA was determined by the thermogravimetric analysis (TGA) method. In addition, ³²P, ^99mTc, and DOX were loaded on nHA by physisorption. And the labeling rate and stability of radionuclides were measured by a γ-counter. The loading and release of DOX at different pH were determined by the dialysis method. Targeting of FA-PEG-nHA loaded with ^99mTc was verified by in vivo SPECT imaging. In vitro anti-tumor effect of ³²P/DOX-FA-PEG-nHA was assessed with apoptosis assay. The safety of the nano-drugs was verified by histopathological analysis.

Results

The SEM images showed that the synthesized nHA was spherical with uniform particle size (average diameter of about 100nm). The grafting ratio is about 10% for PEG and about 20% for FA. The drug loading and the delayed release of DOX at different pH confirmed its long-term therapeutic ability. The labeling of ³²P and ^99mTc was stable and the labeling rate was great. SPECT showed that FA-PEG-nHA showed well in vivo tumor targeting and less damage to normal tissues.

Conclusion

FA-targeted nHA loaded with ³²P, ^99mTc, and DOX may be a new diagnostic and therapeutic strategy for targeting PSMA-positive prostate cancer tumors, which may achieve better therapeutic results while circumventing the severe toxic side effects of conventional chemotherapeutic agents.

Anisotropic silk nanofiber layers as regulators of angiogenesis for optimized bone regeneration

Osteogenesis-angiogenesis coupling processes play a crucial role in bone regeneration. Here, electric field induced aligned nanofiber layers with tunable thickness were coated on the surface of pore walls inside the deferoxamine (DFO)-laden silk fibroin (SF) and hydroxyapatite (HA) composite scaffolds to regulate the release of DFO to control vascularization dynamically. Longer electric field treatments resulted in gradually thickening layers to reduce the release rate of DFO where the released amount of DFO decreased gradually from 84% to 63% after 28 days. Besides the osteogenic capacity of HA, the changeable release of DFO brought different angiogenic behaviors in bone regeneration process, which provided a desirable niche with osteogenic and angiogenic cues. Anisotropic cues were introduced to facilitate cell migration inside the scaffolds. Changeable cytokine secretion from endothelial cells cultured in the different scaffolds revealed the regulation of cell responses related to vascularization in vitro. Peak expression of angiogenic factors appeared at days 7, 21 and 35 for endothelial cells cultured in the scaffolds with different silk nanofier layers, suggesting the dynamical regulation of angiogenesis. Although all of the scaffolds had the same silk and HA composition, in vitro cell studies indicated different osteogenic capacities for the scaffolds, suggesting that the regulation of DFO release also influenced osteogenesis outcomes in vitro. In vivo, the best bone regeneration occurred in defects treated with the composite scaffolds that exhibited the best osteogenic capacity in vitro. Using a rat bone defect model, healing was achieved within 12 weeks, superior to those treated with previous SF-HA composite matrices. Controlling angiogenic properties of bone biomaterials dynamically is an effective strategy to improve bone regeneration capacity.

•

Anisotropic silk nanofiber layers with tunable thickness control the sustained release of DFO dynamically.

•

Dynamical regulation of angiogenesis was achieved in bone regeneration process through tuning the release behaviors of DFO.

•

Significantly improved bone regeneration through the synergistic effect of optimal vascularization and osteogenesis.

Biomimetic Citrate-Coated Luminescent Apatite Nanoplatforms for Diclofenac Delivery in Inflammatory Environments

Luminescent nanoparticles are innovative tools for medicine, allowing the imaging of cells and tissues, and, at the same time, carrying and releasing different types of molecules. We explored and compared the loading/release ability of diclofenac (COX-2 antagonist), in both undoped- and luminescent Terbium³⁺ (Tb³⁺)-doped citrate-coated carbonated apatite nanoparticles at different temperatures (25, 37, 40 °C) and pHs (7.4, 5.2). The cytocompatibility was evaluated on two osteosarcoma cell lines and primary human osteoblasts. Biological effects of diclofenac-loaded-nanoparticles were monitored in an in vitro osteoblast’s cytokine–induced inflammation model by evaluating COX-2 mRNA expression and production of PGE₂. Adsorption isotherms fitted the multilayer Langmuir-Freundlich model. The maximum adsorbed amounts at 37 °C were higher than at 25 °C, and particularly when using the Tb³⁺ -doped particles. Diclofenac-release efficiencies were higher at pH 5.2, a condition simulating a local inflammation. The luminescence properties of diclofenac-loaded Tb³⁺ -doped particles were affected by pH, being the relative luminescence intensity higher at pH 5.2 and the luminescence lifetime higher at pH 7.4, but not influenced either by the temperature or by the diclofenac-loaded amount. Both undoped and Tb³⁺-doped nanoparticles were cytocompatible. In addition, diclofenac release increased COX-2 mRNA expression and decreased PGE₂ production in an in vitro inflammation model. These findings evidence the potential of these nanoparticles for osteo-localized delivery of anti-inflammatory drugs and the possibility to localize the inflammation, characterized by a decrease in pH, by changes in luminescence.

Potent Particle-Based Vehicles for Growth Factor Delivery from Electrospun Meshes: Fabrication and Functionalization Strategies for Effective Tissue Regeneration

Functionalization of electrospun meshes with growth factors (GFs) is a common strategy for guiding specific cell responses in tissue engineering. GFs can exert their intended biological effects only when they retain their bioactivity and can be subsequently delivered in a temporally controlled manner. However, adverse processing conditions encountered in electrospinning can potentially disrupt GFs and diminish their biological efficacy. Further, meshes prepared using conventional approaches often promote an initial burst and rely solely on intrinsic fiber properties to provide extended release. Sequential delivery of multiple GFs─a strategy that mimics the natural tissue repair cascade─is also not easily achievable with traditional fabrication techniques. These limitations have hindered the effective use and translation of mesh-based strategies for tissue repair. An attractive alternative is the use of carrier vehicles (e.g., nanoparticles, microspheres) for GF incorporation into meshes. This review presents advances in the development of particle-integrated electrospun composites for safe and effective delivery of GFs. Compared to traditional approaches, we reveal how particles can protect GF activity, permit the incorporation of multiple GFs, decouple release from fiber properties, help achieve spatiotemporal control over delivery, enhance surface bioactivity, exert independent biological effects, and augment matrix mechanics. In presenting innovations in GF functionalization and composite engineering strategies, we also discuss specific in vitro and in vivo biological effects and their implications for diverse tissue engineering applications.

The Role of Growth Factors in Bioactive Coatings

With increasing obesity and an ageing population, health complications are also on the rise, such as the need to replace a joint with an artificial one. In both humans and animals, the integration of the implant is crucial, and bioactive coatings play an important role in bone tissue engineering. Since bone tissue engineering is about designing an implant that maximally mimics natural bone and is accepted by the tissue, the search for optimal materials and therapeutic agents and their concentrations is increasing. The incorporation of growth factors (GFs) in a bioactive coating represents a novel approach in bone tissue engineering, in which osteoinduction is enhanced in order to create the optimal conditions for the bone healing process, which crucially affects implant fixation. For the application of GFs in coatings and their implementation in clinical practice, factors such as the choice of one or more GFs, their concentration, the coating material, the method of incorporation, and the implant material must be considered to achieve the desired controlled release. Therefore, the avoidance of revision surgery also depends on the success of the design of the most appropriate bioactive coating. This overview considers the integration of the most common GFs that have been investigated in in vitro and in vivo studies, as well as in human clinical trials, with the aim of applying them in bioactive coatings. An overview of the main therapeutic agents that can stimulate cells to express the GFs necessary for bone tissue development is also provided. The main objective is to present the advantages and disadvantages of the GFs that have shown promise for inclusion in bioactive coatings according to the results of numerous studies.

Silk Biomaterials for Bone Tissue Engineering

Silk is a natural fibrous polymer with application potential in regenerative medicine. Increasing interest remains for silk materials in bone tissue engineering due to their characteristics in biocompatibility, biodegradability and mechanical properties. Plenty of the in vitro and in vivo studies confirmed the advantages of silk in accelerating bone regeneration. Silk is processed into scaffolds, hydrogels, and films to facilitate different bone regenerative applications. Bioactive factors such as growth factors and drugs, and stem cells are introduced to silk-based matrices to create friendly and osteogenic microenvironments, directing cell behaviors and bone regeneration. The recent progress in silk-based bone biomaterials is discussed and focused on different fabrication and functionalization methods related to osteogenesis. The challenges and potential targets of silk bone materials are highlighted to evaluate the future development of silk-based bone materials.

Evaluation of silk-based bioink during pre and post 3D bioprinting: A review

During past few decades, the demand for the replacement of damaged organs is increasing consistently. This is due to the advancement in tissue engineering, which opens the possibility of regeneration of damaged organs or tissues into functional parts with the help of 3D bioprinting. Bioprinting technology presents an excellent potential to develop complex structures with precise control over cell suspension and structure. A brief description of different types of 3D bioprinting techniques, including inkjet-based, laser-based, and extrusion-based bioprinting is presented here. Due to innate advantageous features like tunable biodegradability, biocompatibility, elasticity and mechanical robustness, silk has carved a niche in the realm of tissue engineering. In this review article, the focus is to highlight the possible approach of exploring silk as bioink for fabrication of bioprinted implants using 3D bioprinting. This review discusses different type of degumming, dissolution techniques for extraction of proteins from different sources of silk. Different recently reported 3D bioprinting techniques suitable for silk-based bioink are further elaborated. Postprinting characterization of resultant scaffolds are also describe here. However, there is an astounding progress in 3D bioprinting technology, still there is a need to develop further the current bioprinting technology to make it suitable for generation of heterogeneous tissue construct. The possibility of utilizing the adhesive property of sericin to consider it as bioink is elaborated.

Sr-HA scaffolds fabricated by SPS technology promote the repair of segmental bone defects

BACKGROUND

Ideal bone defect repair scaffolds should be biodegradable, biocompatible, bioactive, porous, and provide adequate mechanical support. However, it is challenging to fabricate such an ideal bone repair scaffold. Previously, we showed that 5 wt.% strontium-doped hydroxyapatite (Sr-HA) scaffolds prepared by spark plasma sintering (SPS) technology exhibited good biocompatibility. Moreover, unlike pure hydroxyapatite (HA) scaffolds, HA scaffolds containing strontium (Sr) exhibited superior bioactivity, higher proliferation rate of BMSCs and MG-63 osteoblast cells, as well as enhanced BMSCs differentiation.

METHODS

In this study, we prepared pure HA scaffolds and 5 wt.% strontium containing Sr-HA scaffolds by SPS technology without adhesive, ammonium bicarbonate as pore former. Subsequently, scanning electron microscope (SEM) and X-Ray diffraction (XRD) were used to characterize the properties of Sr-HA and HA scaffolds. The ability of the scaffolds to repair bone defects was evaluated using a critical-sized rabbit tibia-bone defect rabbit model. Thirty 3-month-old New Zealand white rabbits were randomly divided into three groups (blank control group, Sr-HA scaffolds implanted group and HA scaffolds implanted group) with 10 rabbits in each group. These rabbits are sacrificed after 8 weeks and 16 weeks of surgery, and the repair effects of each scaffold were evaluated with X-ray, micro-CT, and HE staining. The three-point bending test was employed to assess the mechanical property of repaired bones.

RESULTS

XRD pattern indicated that Sr-HA and HA scaffolds possess a similar crystal structure after sintering, and that incorporation of strontium did not form impure phase. SEM showed that the porosity of Sr-HA and HA scaffolds was about 40 %. Universal Testing Machine tests showed that Sr-HA scaffolds had better compressive strength than HA scaffolds. Bone defect was obvious, and the fibrous tissue was formed in the bone defects of rabbits in the blank control group after 8 weeks of surgery. Sr-HA and HA scaffolds enhanced osteointegration of the host bone, and extensive woven bone was formed on the surface of the Sr-HA scaffolds. After 16 weeks, the bone strump became blunt and a small amount of callus was formed in the blank control group. Comparatively, the scaffolds were substantially degraded in the Sr-HA scaffolds implanted group while scaffolds shadows still were observed in the HA implanted group. Bone remodeling and cavity recanalization were completely developed in the Sr-HA scaffolds group. The compressive strength of repaired bone in the Sr-HA scaffolds implantation group was higher than that of HA scaffolds implantation group after 8 weeks and 16 weeks of surgery.

CONCLUSIONS

Our results show that the Sr-HA composite scaffolds can effectively repair bone defects and have good biodegradable properties.

Rhein-PEG-nHA conjugate as a bone targeted drug delivery vehicle for enhanced cancer chemoradiotherapy

Bone-targeted therapies have been the choice of treatments for cancer metastases in bone to minimize skeletal morbidity and preserve patients' quality of life. Rhein is of particular interest due to its high bone affinity. Here we reported a novel Rhein- polyethylene glycol (PEG)-nano hydroxyapatite (nHA) conjugate to deliver doxorubicin (DOX) and Phosphorus-32 (³²P) simultaneously for enhanced cancer chemo-radiotherapy. The synthetic Rhein-PEG-nHA conjugates were sphere in shape with an average diameter of ~120 nm. Their morphology, drug release and bone affinity were confirmed in vitro. The release profiles of DOX depend on pH condition, but ³²P exhibited good stability. Rhein-PEG-nHA also showed high bone affinity in vivo, and the tumor volume decreased after the DOX@Rhein-PEG-nHA and ³²P@Rhein-PEG-nHA treatments. Most importantly, the DOX/³²P@Rhein-PEG-nHA showed the strongest inhibition on the growth of bone metastases of breast cancer. We revealed the potential of Rhein-PEG-nHA in combined chemo-radiation treatment for bone metastases of breast cancer.

Electric field-driven building blocks for introducing multiple gradients to hydrogels

Gradient biomaterials are considered as preferable matrices for tissue engineering due to better simulation of native tissues. The introduction of gradient cues usually needs special equipment and complex process but is only effective to limited biomaterials. Incorporation of multiple gradients in the hydrogels remains challenges. Here, beta-sheet rich silk nanofibers (BSNF) were used as building blocks to introduce multiple gradients into different hydrogel systems through the joint action of crosslinking and electric field. The blocks migrated to the anode along the electric field and gradually stagnated due to the solution-hydrogel transition of the systems, finally achieving gradient distribution of the blocks in the formed hydrogels. The gradient distribution of the blocks could be tuned easily through changing different factors such as solution viscosity, which resulted in highly tunable gradient of mechanical cues. The blocks were also aligned under the electric field, endowing orientation gradient simultaneously. Different cargos could be loaded on the blocks and form gradient cues through the same crosslinking-electric field strategy. The building blocks could be introduced to various hydrogels such as Gelatin and NIPAM, indicating the universality. Complex niches with multiple gradient cues could be achieved through the strategy. Silk-based hydrogels with suitable mechanical gradients were fabricated to control the osteogenesis and chondrogenesis. Chondrogenic-osteogenic gradient transition was obtained, which stimulated the ectopic osteochondral tissue regeneration in vivo. The versatility and highly controllability of the strategy as well as multifunction of the building blocks reveal the applicability in complex tissue engineering and various interfacial tissues.

Natural Nanofiber Shuttles for Transporting Hydrophobic Cargo into Aqueous Solutions

Hydrophobic biomolecules realize their functions in vivo in aqueous environments, often through a delicate balance of amphiphilicity and chaperones. Introducing exogenous hydrophobic biomolecules into in vivo aqueous systems is a challenge in drug delivery and regenerative medicine, where labile linkers, carriers, and fusions or chimeric molecules are often designed to facilitate such aqueous interfaces. Here, we utilize naturally derived silk nanofiber shuttles with the capacity to transport hydrophobic cargos directly into aqueous solutions. These nanofibers disperse in organic solvents and in aqueous solutions because of their inherent amphiphilicity, with enriched hydrophobicity and strategically interspersed negatively charged groups. Hydrophobic molecules loaded on these shuttles in organic solvent-water systems separated from the solvent after centrifugation. These concentrated hydrophobic molecule-loaded nanofibers could then be dispersed into aqueous solution directly without modification. These shuttle systems were effective for different hydrophobic molecules such as drugs, vitamins, and dyes. Improved biological stability and functions of hydrophobic cargos after loading on these nanofibers suggest potential applications in drug delivery, cosmetology, medical diagnosis, and related health fields, with a relatively facile process.

A method to visually observe the degradation-diffusion-reconstruction behavior of hydroxyapatite in the bone repair process

Nanostructured hydroxyapatite (HAp) has been applied widely as a scaffold material for bone tissue engineering for its good osteoinduction and biodegradability. However, the degradation process and the distribution of degraded HAp within the bone-defect cavity is still not clear. To visually study the behavior of HAp in bone repair process, a membrane of HAp/terbium (Tb)-HAp nanowires (NWs) was prepared with a concentric circle structure (CCS), of which the inner circle and the outer ring were constructed with Tb-HAp and HAp NWs, respectively. HAp/Tb-HAp CCS membrane possessed good osteogenic capacity and efficient fluorescence in the center for visualization. The in vitro experimental results proved that the Tb-HAp and HAp NWs membranes both presented high cytocompatibility and adequate efficiency to induce osteogenic differentiation of bone marrow stem cells (BMSCs). HAp/Tb-HAp CCS membranes were then implanted into a rat calvarial bone-defect model to study the behavior of HAp in bone repair process in vivo by tracking the fluorescence distribution. The results showed that the fluorescence of Tb-HAp diffused gradually from the inner circle to the outer ring, which suggested that the HAp was first degraded, and then the degraded product was diffused and finally reconstructed. Further, the histological results proved that the doping of Tb did not impair the promotive effect of HAp on bone repair process. Therefore, this study provided a visual method to observe the degradation-diffusion-reconstruction behavior of HAp nanomaterials in bone repair process. STATEMENT OF SIGNIFICANCE: The study of dynamic degradation process of implanted hydroxyapatite (HAp) materials in bone-defect cavity is of great significance to bone tissue engineering applications. Here, we designed a HAp/Tb-HAp nanowires (NWs) membrane with concentric circle structure (CCS) to visibly observe the behavior of HAp during bone repair process. HAp/Tb-HAp CCS membrane possessed both osteoinduction ability and fluorescence property. Calvarial bone-defect repair experiments in vivo showed that the fluorescence of Tb-HAp diffused gradually from inner circle to outer ring, which suggested that HAp was first degraded, then diffused and finally reconstructed. Therefore, this invention provides not only a visible method to observe the degradation-diffusion-reconstruction behavior of HAp-based biomaterials, but also a basic understanding of the dynamic change of HAp-based biomaterials.

Hierarchically designed bone scaffolds: From internal cues to external stimuli

Bone tissue engineering utilizes three critical elements - cells, scaffolds, and bioactive factors - to recapitulate the bone tissue microenvironment, inducing the formation of new bone. Recent advances in materials development have enabled the production of scaffolds that more effectively mimic the hierarchical features of bone matrix, ranging from molecular composition to nano/micro-scale biochemical and physical features. This review summarizes recent advances within the field in utilizing these features of native bone to guide the hierarchical design of materials and scaffolds. Biomimetic strategies discussed in this review cover several levels of hierarchical design, including the development of element-doped compositions of bioceramics, the usage of molecular templates for in vitro biomineralization at the nanoscale, the fabrication of biomimetic scaffold architecture at the micro- and nanoscale, and the application of external physical stimuli at the macroscale to regulate bone growth. Developments at each level are discussed with an emphasis on their in vitro and in vivo outcomes in promoting osteogenic tissue development. Ultimately, these hierarchically designed scaffolds can complement or even replace the usage of cells and biological elements, which present clinical and regulatory barriers to translation. As the field progresses ever closer to clinical translation, the creation of viable therapies will thus benefit from further development of hierarchically designed materials and scaffolds.

Biomolecule-assisted green synthesis of nanostructured calcium phosphates and their biomedical applications

Calcium phosphates (CaPs) are ubiquitous in nature and vertebrate bones and teeth, and have high biocompatibility and promising applications in various biomedical fields. Nanostructured calcium phosphates (NCaPs) are recognized as promising nanocarriers for drug/gene/protein delivery owing to their high specific surface area, pH-responsive degradability, high drug/gene/protein loading capacity and sustained release performance. In order to control the structure and surface properties of NCaPs, various biomolecules with high biocompatibility such as nucleic acids, proteins, peptides, liposomes and phosphorus-containing biomolecules are used in the synthesis of NCaPs. Moreover, biomolecules play important roles in the synthesis processes, resulting in the formation of various NCaPs with different sizes and morphologies. At room temperature, biomolecules can play the following roles: (1) acting as a biocompatible organic phase to form biomolecule/CaP hybrid nanostructured materials; (2) serving as a biotemplate for the biomimetic mineralization of NCaPs; (3) acting as a biocompatible modifier to coat the surface of NCaPs, preventing their aggregation and increasing their colloidal stability. Under heating conditions, biomolecules can (1) control the crystallization process of NCaPs by forming biomolecule/CaP nanocomposites before heating; (2) prevent the rapid and disordered growth of NCaPs by chelating with Ca2+ ions to form precursors; (3) provide the phosphorus source for the controlled synthesis of NCaPs by using phosphorus-containing biomolecules. This review focuses on the important roles of biomolecules in the synthesis of NCaPs, which are expected to guide the design and controlled synthesis of NCaPs. Moreover, we will also summarize the biomedical applications of NCaPs in nanomedicine and tissue engineering, and discuss their current research trends and future prospects.

Anisotropic Biomimetic Silk Scaffolds for Improved Cell Migration and Healing of Skin Wounds

Improved and more rapid healing of full-thickness skin wounds remains a major clinical need. Silk fibroin (SF) is a natural protein biomaterial that has been used in skin repair. However, there has been little effort aimed at improving skin healing through tuning the hierarchical microstructure of SF-based matrices and introducing multiple physical cues. Recently, enhanced vascularization was achieved with SF scaffolds with nanofibrous structures and tunable secondary conformation of the matrices. We hypothesized that anisotropic features in nanofibrous SF scaffolds would promote cell migration, neovascularization, and tissue regeneration in wounds. To address this hypothesis, SF nanofibers were aligned in an electric field to form anisotropic porous scaffolds after lyophilization. In vitro and in vivo studies indicated good cytocompatibility, and improved cell migration and vascularization than nanofibrous scaffolds without these anisotropic features. These improvements resulted in more rapid wound closure, tissue ingrowth, and the formation of new epidermis, as well as higher collagen deposition with a structure similar to the surrounding native tissue. The new epidermal layers and neovascularization were achieved by day 7, with wound healing complete by day 28. It was concluded that anisotropic SF scaffolds alone, without a need for growth factors and cells, promoted significant cell migration, vascularization, and skin regeneration and may have the potential to effectively treat dermal wounds.

RhBMP-2 and concomitant rapid material degradation synergistically promote bone repair and regeneration with collagen-hydroxyapatite nanocomposites

The effective treatment of bone defects is still a great challenge in clinical practice. Synthetic bone-grafting substitutes of composition and structure analogous to bone as well as incorporated with growth factors are considered to be a promising solution. In this study, a collagen-hydroxyapatite (CHA) nanocomposite scaffold was developed by collagen self-assembly with simultaneous HA synthesis. The physicochemical properties such as morphology, inorganic phase, thermal decomposition, specific surface area and pore size distribution were characterized. The osteogenicity of CHA in the absence or presence of recombinant human bone morphogenetic protein-2 (rhBMP-2) was assessed both by cell culturing and animal implantation experiments. The gene expression results showed that the osteogenic differentiation capacity of rat bone mesenchymal stem cells (rBMSCs) has been enhanced both by CHA and rhBMP-2. The efficient bone regeneration of femoral defects in rabbits was achieved with CHA and CHA pre-absorbed rhBMP-2 (CHA/B), confirmed by micro-computed tomography measurements, histological observation and immunohistochemical analyses. The CHA nanocomposite was completely degraded within 8 weeks and replaced by new bone. It was found that rhBMP-2 not only accelerated and enhanced bone formation, but also expedited the degradation of CHA. It is believed that the rhBMP-2 and concomitant rapid material degradation synergistically promote bone repair and regeneration with CHA. The biodegradation behavior of CHA in the presence of rhBMP-2 can be further investigated to gain an in-depth understanding of the complex interplays among biomaterials, growth factors and their target cells. The relevant knowledge will facilitate the search for a reasonable, safe and efficient methodology for the introduction of growth factors to biomaterials so as to achieve satisfactory tissue regeneration.

Hydroxyapatite nanobelt/polylactic acid Janus membrane with osteoinduction/barrier dual functions for precise bone defect repair

Controllable osteoinduction maintained in the original defect area is the key to precise bone repair. To meet the requirement of precise bone regeneration, a hydroxyapatite (HAp) nanobelt/polylactic acid (PLA) (HAp/PLA) Janus membrane has been successfully prepared in this study by coating PLA on a paper-like HAp nanobelt film by a casting-pervaporation method. The Janus membrane possesses dual functions: excellent osteoinduction from the hydrophilic HAp nanobelt side and barrier function originating from the hydrophobic PLA film. The cell viability and osteogenic differentiation ability of human adipose-derived stem cells (hADSCs) on the Janus membrane were assessed. The in vitro experimental results prove that the HAp nanobelt side presents high cell viability and efficient osteoinduction without any growth factor and that the PLA side can prohibit cell attachment. The in vivo repair experiments on a rat mandible defect model prove that the PLA side can prevent postoperative adhesion between bone and adjacent soft tissues. Most importantly, the HAp side has a strong ability to promote defect repair and bone regeneration. Therefore, the HAp/PLA Janus membrane will have wide applications as a kind of tissue engineering material in precise bone repair because of its unique dual osteoinduction/barrier functions, biocompatibility, low cost, and its ability to be mass-produced.

STATE OF SIGNIFICANCE

Precise bone defect repair to keeping tissue integrity and original outline shape is a very important issue for tissue engineering. Here, we have designed and prepared a novel HAp/PLA Janus membrane using a casting-pervaporation method to form a layer of PLA film on paper-like HAp nanobelt film. HAp nanobelt side of the Janus membrane can successfully promote osteogenic differentiation. PLA side of the Janus membrane exhibits good properties as a barrier for preventing the adhesion of cells in vitro. Mandible repair experiments in vivo have shown that the HAp/PLA Janus membrane can promote rat mandible repair on the HAp side and can successfully prevent postoperative adhesion on the PLA side at the same time. Therefore, the HAp/PLA Janus membrane with its osteoinduction/barrier dual functions can be applied to repair bone defect precisely.

Micro and nanotechnologies for bone regeneration: Recent advances and emerging designs

Treatment of critical-size bone defects is a major medical challenge since neither the bone tissue can regenerate nor current regenerative approaches are effective. Emerging progresses in the field of nanotechnology have resulted in the development of new materials, scaffolds and drug delivery strategies to improve or restore the damaged tissues. The current article reviews promising nanomaterials and emerging micro/nano fabrication techniques for targeted delivery of biomolecules for bone tissue regeneration. In addition, recent advances in fabrication of bone graft substitutes with similar properties to normal tissue along with a brief summary of current commercialized bone grafts have been discussed.

One-dimensional hydroxyapatite materials: preparation and applications

As one of the biominerals, hydroxyapatite (HAP) plays important roles in biology, and inspires researchers to investigate HAP-based materials for the applications in various biomedical fields. Among them, one-dimensional (1-D) micro-/nanostructured HAP materials have attracted great interest in the last decades. This review summarizes the preparation and applications of 1-D HAP materials, and discusses different aspects of 1-D HAP materials. Various synthetic methods have been developed to prepare 1-D HAP materials with different morphologies, sizes, surface properties and crystallinities. In addition, elements-substituted 1-D HAP materials and composites have also been prepared. Surfactants and additives are usually adopted to control the nucleation and growth of 1-D HAP materials, but the related mechanisms are not very clear yet. The applications of 1-D HAP materials have been widely investigated, and the biomedical applications show great prospect but still need further improvements. A new kind of highly flexible fire-resistant inorganic paper made of ultralong HAP nanowires has been developed and is a promising alternative of the traditional cellulose paper for valuable archives and important documents. Regardless of the advances, further studies should be made for preparing 1-D HAP materials with controlled structures, sizes and morphologies and for boosting their various applications.

Innovative biodegradable poly(L-lactide)/collagen/hydroxyapatite composite fibrous scaffolds promote osteoblastic proliferation and differentiation

The development of an artificial bone graft which can promote the regeneration of fractures or diseased bones is currently the most challenging aspect in bone tissue engineering. To achieve the purpose of promoting bone proliferation and differentiation, the artificial graft needs have a similar structure and composition of extracellular matrix. One-step electrospinning method of biocomposite nanofibers containing hydroxyapatite (HA) nanoparticles and collagen (Coll) were developed for potential application in bone tissue engineering. Nanocomposite scaffolds of poly(L-lactide) (PLLA), PLLA/HA, PLLA/Coll, and PLLA/Coll/HA were fabricated by electrospinning. The morphology, diameter, elements, hydrophilicity, and biodegradability of the composite scaffolds have been investigated. The biocompatibility of different nanocomposite scaffolds was assessed using mouse osteoblasts MC3T3-E1 in vitro, and the proliferation, differentiation, and mineralization of cells on different nanofibrous scaffolds were investigated. The results showed that PLLA/Coll/HA nanofiber scaffolds enhanced cell adhesion, spreading, proliferation, differentiation, mineralization, and gene expression of osteogenic markers compared to other scaffolds. In addition, the nanofibrous scaffolds maintained a stable composition at the beginning of the degradation period and morphology wastage and weight loss were observed when incubated for up to 80 days in physiological simulated conditions. The PLLA/Coll/HA composite nanofibrous scaffolds could be a potential material for guided bone regeneration.

Nanoscale Silk-Hydroxyapatite Hydrogels for Injectable Bone Biomaterials

Injectable hydrogel systems are important bone substitutes for regeneration because of their handling properties and the ability to fill irregular defects. Silk-hydroxyapatite composite materials with silk nanofibers in hydrogels were prepared and used as biomaterials for osteogenesis. These thixotropic silk nanofiber hydrogels and water-dispersible silk-HA nanoparticles were blended to form injectable nanoscale systems with a homogeneous distribution of a high HA content [60% (w/w)] to imitate bone niche. A modulus of ∼21 kPa was also achieved following the addition of HA in the systems, providing physical cues to induce osteodifferentiation. The composite hydrogels supported improved osteogenesis compared to that with silk nanofiber hydrogels. The newly formed bone tissue and bone defect healing were detected after implantation of the silk-HA composite hydrogels, suggesting utility for the regeneration of irregular bone defects.

Enhancing regenerative approaches with nanoparticles

In this review, we discuss recent developments in the field of nanoparticles and their use in tissue regeneration approaches. Owing to their unique chemical properties and flexibility in design, nanoparticles can be used as drug delivery systems, to create novel features within materials or as bioimaging agents, or indeed these properties can be combined to create smart multifunctional structures. This review aims to provide an overview of this research field where the focus will be on nanoparticle-based strategies to stimulate bone regeneration; however, the same principles can be applied for other tissue and organ regeneration strategies. In the first section, nanoparticle-based methods for the delivery of drugs, growth factors and genetic material to promote tissue regeneration are discussed. The second section deals with the addition of nanoparticles to materials to create nanocomposites. Such materials can improve several material properties, including mechanical stability, biocompatibility and biological activity. The third section will deal with the emergence of a relatively new field of research using nanoparticles in advanced cell imaging and stem cell tracking approaches. As the development of nanoparticles continues, incorporation of this technology in the field of regenerative medicine will ultimately lead to new tools that can diagnose, track and stimulate the growth of new tissues and organs.

Facile fabrication of bioactive ultra-small protein–hydroxyapatite nanoconjugates via liquid-phase laser ablation and their enhanced osteogenic differentiation activity

Ultra-small protein–hydroxyapatite nanoconjugates promote the osteogenic differentiation of mesenchymal stem cells.

Self-assembly of pifithrin-α-loaded layered double hydroxide/chitosan nanohybrid composites as a drug delivery system for bone repair materials

The self-assembly of pifithrin-α-loaded layered double hydroxide/chitosan nanohybrid composites as a drug delivery system was demonstrated for the first time to improve the cytocompatibility and enhance the osteoinductivity for the treatment of bone defects.

Silk-Hydroxyapatite Nanoscale Scaffolds with Programmable Growth Factor Delivery for Bone Repair

Osteoinductive biomaterials are attractive for repairing a variety of bone defects, and biomimetic strategies are useful toward developing bone scaffolds with such capacity. Here, a multiple biomimetic design was developed to improve the osteogenesis capacity of composite scaffolds consisting of hydroxyapatite nanoparticles (HA) and silk fibroin (SF). SF nanofibers and water-dispersible HA nanoparticles were blended to prepare the nanoscaled composite scaffolds with a uniform distribution of HA with a high HA content (40%), imitating the extracellular matrix (ECM) of bone. Bone morphogenetic protein-2 (BMP-2) was loaded in the SF scaffolds and HA to tune BMP-2 release. In vitro studies showed the preservation of BMP-2 bioactivity in the composite scaffolds, and programmable sustained release was achieved through adjusting the ratio of BMP-2 loaded on SF and HA. In vitro and in vivo osteogenesis studies demonstrated that the composite scaffolds showed improved osteogenesis capacity under suitable BMP-2 release conditions, significantly better than that of BMP-2 loaded SF-HA composite scaffolds reported previously. Therefore, these biomimetic SF-HA nanoscaled scaffolds with tunable BMP-2 delivery provide preferable microenvironments for bone regeneration.