Biodegradable poly(ε-caprolactone) as a controlled drug delivery vehicle of vancomycin for the treatment of MRSA infection

Recent advances in nanostructured delivery systems for vancomycin

Despite the development of new generations of antibiotics, vancomycin remained as a high-efficacy antibiotic for treating the infections caused by MRSA. Researchers have explored various nanoformulations, aiming to enhance the therapeutic efficacy of vancomycin. Such novel formulations improve the effectiveness of drug cargoes in treating bacterial infections and minimizing the risk of adverse effects. The vast of researches have focuses on enhancing the permeation ability of vancomycin through different biological barriers especially those of gastrointestinal tract. Increasing the drug loading and tuning the drug release from nanocarrier are other important goal for many conducted studies. This study reviews the newest nano-based formulations for vancomycin as a key antibiotic in treating hospitalized bacterial infections.

Comprehensive review of materials, applications, and future innovations in biodegradable esophageal stents

Esophageal stricture (ES) results from benign and malignant conditions, such as uncontrolled gastroesophageal reflux disease (GERD) and esophageal neoplasms. Upper gastrointestinal endoscopy is the preferred diagnostic approach for ES and its underlying causes. Stent insertion using an endoscope is a prevalent method for alleviating or treating ES. Nevertheless, the widely used self-expandable metal stents (SEMS) and self-expandable plastic stents (SEPS) can result in complications such as migration and restenosis. Furthermore, they necessitate secondary extraction in cases of benign esophageal stricture (BES), rendering them unsatisfactory for clinical requirements. Over the past 3 decades, significant attention has been devoted to biodegradable materials, including synthetic polyester polymers and magnesium-based alloys, owing to their exceptional biocompatibility and biodegradability while addressing the challenges associated with recurring procedures after BES resolves. Novel esophageal stents have been developed and are undergoing experimental and clinical trials. Drug-eluting stents (DES) with drug-loading and drug-releasing capabilities are currently a research focal point, offering more efficient and precise ES treatments. Functional innovations have been investigated to optimize stent performance, including unidirectional drug-release and anti-migration features. Emerging manufacturing technologies such as three-dimensional (3D) printing and new biodegradable materials such as hydrogels have also contributed to the innovation of esophageal stents. The ultimate objective of the research and development of these materials is their clinical application in the treatment of ES and other benign conditions and the palliative treatment of malignant esophageal stricture (MES). This review aimed to offer a comprehensive overview of current biodegradable esophageal stent materials and their applications, highlight current research limitations and innovations, and offer insights into future development priorities and directions.

Choosing the right animal model for osteomyelitis research: Considerations and challenges

Osteomyelitis is a debilitating bone disorder characterized by an inflammatory process involving the bone marrow, bone cortex, periosteum, and surrounding soft tissue, which can ultimately result in bone destruction. The etiology of osteomyelitis can be infectious, caused by various microorganisms, or noninfectious, such as chronic nonbacterial osteomyelitis (CNO) and chronic recurrent multifocal osteomyelitis (CRMO). Researchers have turned to animal models to study the pathophysiology of osteomyelitis. However, selecting an appropriate animal model that accurately recapitulates the human pathology of osteomyelitis while controlling for multiple variables that influence different clinical presentations remains a significant challenge. In this review, we present an overview of various animal models used in osteomyelitis research, including rodent, rabbit, avian/chicken, porcine, minipig, canine, sheep, and goat models. We discuss the characteristics of each animal model and the corresponding clinical scenarios that can provide a basic rationale for experimental selection. This review highlights the importance of selecting an appropriate animal model for osteomyelitis research to improve the accuracy of the results and facilitate the development of novel treatment and management strategies.

Innovative Design of Targeted Nanoparticles: Polymer-Drug Conjugates for Enhanced Cancer Therapy

Polymer-drug conjugates (PDCs) have shown great promise in enhancing the efficacy and safety of cancer therapy. These conjugates combine the advantageous properties of both polymers and drugs, leading to improved pharmacokinetics, controlled drug release, and targeted delivery to tumor tissues. This review provides a comprehensive overview of recent developments in PDCs for cancer therapy. First, various types of polymers used in these conjugates are discussed, including synthetic polymers, such as poly(↋-caprolactone) (PCL), D-α-tocopheryl polyethylene glycol (TPGS), and polyethylene glycol (PEG), as well as natural polymers such as hyaluronic acid (HA). The choice of polymer is crucial to achieving desired properties, such as stability, biocompatibility, and controlled drug release. Subsequently, the strategies for conjugating drugs to polymers are explored, including covalent bonding, which enables a stable linkage between the polymer and the drug, ensuring controlled release and minimizing premature drug release. The use of polymers can extend the circulation time of the drug, facilitating enhanced accumulation within tumor tissues through the enhanced permeability and retention (EPR) effect. This, in turn, results in improved drug efficacy and reduced systemic toxicity. Moreover, the importance of tumor-targeting ligands in PDCs is highlighted. Various ligands, such as antibodies, peptides, aptamers, folic acid, herceptin, and HA, can be incorporated into conjugates to selectively deliver the drug to tumor cells, reducing off-target effects and improving therapeutic outcomes. In conclusion, PDCs have emerged as a versatile and effective approach to cancer therapy. Their ability to combine the advantages of polymers and drugs offers enhanced drug delivery, controlled release, and targeted treatment, thereby improving the overall efficacy and safety of cancer therapies. Further research and development in this field has great potential to advance personalized cancer treatment options.

Recent Advances in Polycaprolactones for Anticancer Drug Delivery

Poly(ε-Caprolactone)s are biodegradable and biocompatible polyesters that have gained considerable attention for drug delivery applications due to their slow degradation and ease of functionalization. One of the significant advantages of polycaprolactone is its ability to attach various functionalities to its backbone, which is commonly accomplished through ring-opening polymerization (ROP) of functionalized caprolactone monomer. In this review, we aim to summarize some of the most recent advances in polycaprolactones and their potential application in drug delivery. We will discuss different types of polycaprolactone-based drug delivery systems and their behavior in response to different stimuli, their ability to target specific locations, morphology, as well as their drug loading and release capabilities.

The structure and selected properties of poly(ε-caprolactone)-based biodegradable composites with high calcium carbonate concentration

The article refers to new polycaprolactone (PCL) composites with high concentration of calcium carbonate (CC). The objective of the present study was the manufacturing of PCL-based biodegradable composites, containing from 24 to 75 % of CC by mass, along with analyses of changes in selected properties of the obtained PCL composites, occurring upon various amounts of CC. Importantly, in the study relatively cheap and unmodified kind of CC has been used to determine the changeover cost of produced composites. Qualitative and quantitative analyses in addition to structure analysis of the obtained composites, including the distribution of the filler particles and their average dimensions were conducted. Furthermore, the mechanical and thermal properties, mass melt flow rate and the density have been determined. Finally, a commercially important economic analysis has been presented. A significant influence of CC on the mechanical properties of PCL was found. Specifically, the reduction of its relative elongation at break and impact strength, as well as the increase of its flexural modulus and bending strength. An increase in the thermal stability of the produced composites was also observed, however the characteristic temperatures of phase transitions as well as the degree of crystallinity did not change significantly. Considering the results of the density tests, an increase in the CC content resulted in a significant decrease in the unit price of the produced composites. This is of particular application importance, because a lower cost material with new properties could be obtained.

Synthesis and Characterization of Functional Cellulose-Ether-Based PCL- and PLA-Grafts-Copolymers

The use of biodegradable materials such as cellulose and polyesters can be extended through the combination, as well as modification, of these biopolymers. By controlling the molecular structure and composition of copolymers of these components, it should also be possible to tailor their material properties. We hereby report on the synthesis and characterization of cellulose-based graft copolymers with a precise molecular composition and copolymer architecture. To prepare such materials, we initially modified cellulose through the regioselective protection of the 6-OH group using trityl chloride. The 6-O protected compound was then alkylated, and deprotection at the 6-OH group provided the desired 2,3-di-O-alkyl cellulose compounds that were used as macroinitiators for ring opening polymerization. Regioselective modification was hereby necessary to obtain compounds with an exact molecular composition. Ring opening polymerization, catalyzed by Sn(Oct)₂, at the primary 6-OH group of the cellulose macroinitiator, using L-lactide or ε-caprolactone, resulted in graft copolymers with the desired functionalization pattern. The materials were characterized using Fourier-transform infrared spectroscopy, ¹H- and ¹³C- nuclear magnetic resonance spectroscopy, size exclusion chromatography as well as X-ray diffraction, and differential scanning calorimetry. PCL-based copolymers exhibited distinct melting point as well as a crystalline phase of up to 47%, while copolymers with PLA segments were highly amorphous, showing a broad amorphous reflex in the XRD spectra, and no melting or crystallization points were discernible using differential scanning calorimetry.

Synthetic biodegradable polyesters for implantable controlled-release devices

INTRODUCTION

: Implantable devices can be designed to release drugs to localized regions of tissue at sustained and reliable rates. Advances in polymer engineering have led to the design and development of drug-loaded implants with predictable, desirable release profiles. Biodegradable polyesters exhibit chemical, physical, and biological properties suitable for developing implants for pain management, cancer therapy, contraception, antiviral therapy, and other applications.

AREAS COVERED

: This article reviews the use of biodegradable polyesters for drug-loaded implants by discussing the properties of commonly used polymers, techniques for implant formulation and manufacturing, mechanisms of drug release, and clinical applications of implants as drug delivery devices.

EXPERT OPINION

: Drug delivery implants are unique systems for safe and sustained drug release, providing high bioavailability and low toxicity. Depending on the implant design and tissue site of deployment, implants can offer either localized or systemic drug release. Due to the long history of use of degradable polyesters in medical devices, polyester-based implants represent an important class of controlled release technologies. Further, polyester-based implants are the largest category of drug delivery implants to reach the point of testing in humans or approval for human use.

Scalable and Room-Temperature Ring-Opening Polymerization of ε-Caprolactone Catalyzed by Active Lithium Tetramethylene-Tethered Bis[N-(N'-butylimidazol-2-ylidene)] N-Heterocyclic Carbene as a Lewis Acid Organocatalyst

The Lewis acid organocatalytic system of lithium tetramethylene-tethered bis[N-(N'-butylimidazol-2-ylidene)] N-heterocyclic carbene (1,4-bisNHC) including lithium benzyloxide and benzyl alcohol has been successfully utilized in the ring-opening polymerization (ROP) of ε-caprolactone (CL) for the first time. The catalytic performance of this organic catalyst in the synthesis of high-molecular-weight polymers was investigated via bulk polymerization using different combinations of tetramethylene-tethered bis[N-(N'-butylimidazolium)] hexafluorophosphate (1,4-bis[Bim][PF₆]), benzyl alcohol (BnOH), and n-butyl lithium (nBuLi) ([1,4-bis[Bim][PF₆]]/[BnOH]/[nBuLi]) with the molar ratios of 0:2:2, 1:1:3, 1:2:3, and 1:2:4. The results showed that the molar ratio of 1:2:3 efficiently and rapidly initiated the bulk ROP of CL at room temperature with a high molar ratio of CL to 1,4-bis[Bim][PF₆] of 3000/1 and produced the highest number of average-molecular-weight (M_n) poly(ε-caprolactone) (103,057 g mol^-1) with the dispersity (D̵) and %conversion of 1.73 and 98% in a short period of time (152 s). From comparative studies, the relative polymerization rates of the bulk ROP of CL with different [1,4-bis[Bim][PF₆]]/[BnOH]/[nBuLi] molar ratios was determined in the following order: 1:2:4 > 1:1:3 > 1:2:3 > 0:2:2. For mechanistic investigation, the bulk ROP mechanism of CL with our organic catalyst was proposed through the intramolecular bis-lithium-carbene interaction pathway for 1,4-bisNHC_1,1,3, 1,4-bisNHC_1,2,3, and 1,4-bisNHC_1,2,4 systems.

Allicin-Loaded Hydroxyapatite: Enhanced Release, Cytocompatibility, and Antibacterial Properties for Bone Tissue Engineering Applications

Allicin, the active compound of garlic extract, is a naturally sourced biomolecule, which promotes a vast range of health benefits. However, the limited stability of allicin restricts its applications in tissue engineering. Additionally, the detailed effects of allicin in bone health are yet to be explored. Our work reports on the fabrication of a novel allicin-loaded hydroxyapatite drug delivery system with enhanced biological properties. The fabricated system shows excellent antibacterial efficiency against S. aureus after 36 h of bacterial interaction with a sample. The allicin release kinetics are enhanced with polycaprolactone (PCL). The obtained results after 20 days of drug release study indicate that PCL coating leads to an increase in cumulative allicin release from ~ 35% to 70% at a physiological pH of 7.4. These scaffolds maintain stability during the whole period of drug release. Cytocompatibility of tested compositions with osteoblasts indicates enhanced cell viability and good filopodial attachment on the sample surface at day 7. These allicin-loaded antibacterial and cytocompatible scaffolds can find applications as localized delivery vehicles for bone tissue engineering.

Hyaluronic Acid within Self-Assembling Nanoparticles: Endless Possibilities for Targeted Cancer Therapy

Self-assembling nanoparticles (SANPs) based on hyaluronic acid (HA) represent unique tools in cancer therapy because they combine the HA targeting activity towards cancer cells with the advantageous features of the self-assembling nanosystems, i.e., chemical versatility and ease of preparation and scalability. This review describes the key outcomes arising from the combination of HA and SANPs, focusing on nanomaterials where HA and/or HA-derivatives are inserted within the self-assembling nanostructure. We elucidate the different HA derivatization strategies proposed for this scope, as well as the preparation methods used for the fabrication of the delivery device. After showing the biological results in the employed in vivo and in vitro models, we discussed the pros and cons of each nanosystem, opening a discussion on which approach represents the most promising strategy for further investigation and effective therapeutic protocol development.

Synthesis, characterization, and evaluation of chloroaluminium phthalocyanine incorporated in poly(ε-caprolactone) nanoparticles for photodynamic therapy

BACKGROUND

The use of nanotechnology has been widely used in biomedical science, which consists of orthopedic implants, tissue engineering, cancer therapy and drug elution from nanoparticle systems, such as poly-caprolactone (PCL) nanoparticles, which stand out mainly for their biocompatibility, being considered as effective carriers for photosensitizing drugs (PS) in photodynamic therapy (PDT) protocols.

METHODS

This manuscript describes the synthesis and characterization of PCL nanoparticles for controlled release of the drug chloro-aluminum phthalocyanine (ClAlPc) as a photosensitizer for application in PDT. The PCL-ClAlPc nanoparticles were developed by the nanoprecipitation process. The structure and morphology of the nanoparticles were studied with scanning electron microscopy (SEM) and with Fourier transform infrared (FTIR). The size of nanomaterials was studied using the Dynamic Light Scattering (DLS) method. Photophysical and photochemical characterizations were performed. Subsequently, photobiological studies were also used to characterize the system.

RESULTS

The nanoparticles had an average diameter of 384.7 ± 138.6 nm and a polydispersity index of 0.153. SEM analysis revealed that the system formed a spherical shape typical of these delivery systems. Charging efficiency was 82.1% ± 1.2%. The phthalocyanine-loaded PCL nanoparticles maintained their photophysical behavior after encapsulation. Cell viability was determined after the dark toxicity test, and it was possible to observe that there was no evidence of toxicity in the dark, for all concentrations tested. The assay also revealed that adenocarcinoma cells treated with free ClAlPc and in the nanoformulation showed 100% cell death when subjected to PDT protocols. The intracellular location of the photosensitizer indicated a high potential for accumulation in the cytoplasm and nucleus.

CONCLUSIONS

From the photophysical, photochemical and photobiological analyzes obtained, it was possible to observe that the development of PCL nanoparticles encapsulated with ClAlPc, by the nanoprecipitation method was adequate and that the in vivo release study is efficient to reduce the release rate and attenuate the burst of PS loaded on PCL nanoparticles. The results reinforce that the use of this system as drug delivery systems is useful in PDT protocols.

Controlled DNA Delivery Using Poly(lactide) Nanoparticles and Understanding the Binding Interactions

Cationic polymer-based gene delivery vectors suffer from several limitations such as low DNA-loading capacity, poor transfection, toxicity, environmental degradations, etc. Again, very limited works are available addressing the binding interactions in detail at the atomic level explaining the loading capacity, protection ability against harsh environments, and controlled release behavior of the DNA-encapsulated vehicles. Here, a poly(l-lactide) (PLA) nanoparticle-based controlled DNA release system is proposed. The developed vehicle possesses a high DNA-loading capacity and can release the loaded DNA in a controlled manner. Spectroscopic, physicochemical, and molecular simulation techniques (AM1 and atomistic molecular dynamics) have been employed to understand the binding interactions between PLA and DNA molecules enabling high DNA loading, protection against external harsh environments, and controlled DNA release behavior. Methyl thiazolyl tetrazolium (MTT) assay experiments confirm the biocompatible nature of the vehicle. Cellular uptake efficiency and endo-lysosomal escape capabilities have been investigated against HeLA cells. This study, therefore, demonstrates the development of a promising nonviral DNA delivery vector and includes a detailed investigation of the atomic-level interaction behavior between PLA and DNA molecules.

Degradation Behavior of Polymers Used as Coating Materials for Drug Delivery-A Basic Review

The purpose of the work was to emphasize the main differences and similarities in the degradation mechanisms in the case of polymeric coatings compared with the bulk ones. Combined with the current background, this work reviews the properties of commonly utilized degradable polymers in drug delivery, the factors affecting degradation mechanism, testing methods while offering a retrospective on the evolution of the controlled release of biodegradable polymeric coatings. A literature survey on stability and degradation of different polymeric coatings, which were thoroughly evaluated by different techniques, e.g., polymer mass loss measurements, surface, structural and chemical analysis, was completed. Moreover, we analyzed some shortcomings of the degradation behavior of biopolymers in form of coatings and briefly proposed some solving directions to the main existing problems (e.g., improving measuring techniques resolution, elucidation of complete mathematical analysis of the different degradation mechanisms). Deep studies are still necessary on the dynamic changes which occur to biodegradable polymeric coatings which can help to envisage the future performance of synthesized films designed to be used as medical devices with application in drug delivery.

Effect of temperature and ultraviolet light on the bacterial kill effectiveness of antibiotic-infused 3D printed implants

Drug eluting 3D printed polymeric implants have great potential in orthopaedic applications since they are relatively inexpensive and can be designed to be patient specific thereby providing quality care. Fused Deposition Modeling (FDM) and Stereolithography (SLA) are among the most popular techniques available to print such polymeric implants. These techniques facilitate introducing antibiotics into the material at microscales during the manufacturing stage and subsequently, the printed implants can be engineered to release drugs in a controlled manner. However, FDM uses high temperature to melt the filament as it passes through the nozzle and SLA relies on exposure to nanoscale wavelength ultraviolet (UV) light which can adversely affect the anti-bacterial effectiveness of the antibiotics. The focus of this article is two-fold: i) Examine the effect of high temperature on the bacterial kill-effectiveness of eluted antibiotics through Polycaprolactone (PCL) based femoral implants and ii) Examine the effect of exposure to ultraviolet (UV) light on the bacterial kill-effectiveness of eluted antibiotics through femoral implants made up of a composite resin with various weight fractions of Polyethylene Glycol (PEG) and Polyethylene Glycol Diacrylate (PEGDA). Results indicate that even after exposing doxycycline, vancomycin and cefazolin at different temperatures between 20oC and 230oC, the antibiotics did not lose their effectiveness (kill radius of at least 0.85 cm). For doxycycline infused implants exposed to UV light, it was seen that a resin with 20 % PEGDA and 80 % PEG had the highest efficacy (1.8 cm of kill radius) and the lowest efficacy was found in an implant with 100 % PEGDA (1.2 cm of kill radius).

The 3D-Printed Bilayer's Bioactive-Biomaterials Scaffold for Full-Thickness Articular Cartilage Defects Treatment

The full-thickness articular cartilage defect (FTAC) is an abnormally severe grade of articular cartilage (AC) injury. An osteochondral autograft transfer (OAT) is the recommended treatment, but the increasing morbidity rate from osteochondral plug harvesting is a limitation. Thus, the 3D-printed bilayer’s bioactive-biomaterials scaffold is of major interest. Polylactic acid (PLA) and polycaprolactone (PCL) were blended with hydroxyapatite (HA) for the 3D-printed bone layer of the bilayer’s bioactive-biomaterials scaffold (B-BBBS). Meanwhile, the blended PLA/PCL filament was 3D printed and combined with a chitosan (CS)/silk firoin (SF) using a lyophilization technique to fabricate the AC layer of the bilayer’s bioactive-biomaterials scaffold (AC-BBBS). Material characterization and mechanical and biological tests were performed. The fabrication process consists of combining the 3D-printed structure (AC-BBBS and B-BBBS) and a lyophilized porous AC-BBBS. The morphology and printing abilities were investigated, and biological tests were performed. Finite element analysis (FEA) was performed to predict the maximum load that the bilayer’s bioactive-biomaterials scaffold (BBBS) could carry. The presence of HA and CS/SF in the PLA/PCL structure increased cell proliferation. The FEA predicted the load carrying capacity to be up to 663.2 N. All tests indicated that it is possible for BBBS to be used in tissue engineering for AC and bone regeneration in FTAC treatment.

Preparation and modeling of three-layered PCL/PLGA/PCL fibrous scaffolds for prolonged drug release

The authors present the preparation procedure and a computational model of a three‐layered fibrous scaffold for prolonged drug release. The scaffold, produced by emulsion/sequential electrospinning, consists of a poly(d,l-lactic-co-glycolic acid) (PLGA) fiber layer sandwiched between two poly(ε-caprolactone) (PCL) layers. Experimental results of drug release rates from the scaffold are compared with the results of the recently introduced computational finite element (FE) models for diffusive drug release from nanofibers to the three-dimensional (3D) surrounding medium. Two different FE models are used: (1) a 3D discretized continuum and fibers represented by a simple radial one-dimensional (1D) finite elements, and (2) a 3D continuum discretized by composite smeared finite elements (CSFEs) containing the fiber smeared and surrounding domains. Both models include the effects of polymer degradation and hydrophobicity (as partitioning) of the drug at the fiber/surrounding interface. The CSFE model includes a volumetric fraction of fibers and diameter distribution, and is additionally enhanced by using correction function to improve the accuracy of the model. The computational results are validated on Rhodamine B (fluorescent drug l) and other hydrophilic drugs. Agreement with experimental results proves that numerical models can serve as efficient tools for drug release to the surrounding porous medium or biological tissue. It is demonstrated that the introduced three-layered scaffold delays the drug release process and can be used for the time-controlled release of drugs in postoperative therapy.

Amphotericin B Loaded Polymeric Nanoparticles for Treatment of Leishmania Infections

Fungal infections in immune-compromised patients are an important cause of mortality and morbidity. Amphotericin B (Amp B) is considered a powerful fungicidal drug but its clinical usage has certain limitations when administered intravenously due to its toxicity and poor solubility. In consideration of such challenges, in cutaneous leishmaniasis, the topical application of Amp B can be a safer option in many aspects. Thus, herein, biopolymer of polycaprolactone (PCL) nanoparticles (NPs) were developed with the loading of Amp B by nanoprecipitation for the treatment of topical leishmanial infections. Various parameters, such as concentration of PCL and surfactant Poloxamer 407, were varied in order to optimize the formation of nanoparticles for the loading of Amp B. The optimized formulation exhibited a mean hydrodynamic particle size of 183 nm with a spherical morphology and an encapsulation efficiency of 85%. The applications of various kinetic models reveal that drug release from nanoformulation follows Korsmeyer-Peppas kinetics and has a high diffusion exponent at a physiological pH of 7.4 as well a skin relevant pH = 5.5. The activity of the prepared nanoparticles was also demonstrated in Leishmania infected macrophages. The measured IC₅₀ of the prepared nanoparticle formulation was observed to be significantly lower when compared to control free Amp B and AmBisome^® for both L. tropica KWH23 and L. donovani amastigotes in order to demonstrate maximum parasite inhibition. The prepared topical nanoformulations are capable of providing novel options for the treatment of leishmaniasis, which can be possible after in vivo assays as well as the establishment of safety profiles.

In vivo approach of simply constructed pyrazinamide conjugated chitosan-g-polycaprolactone micelles for methicillin resistance Staphylococcus aureus

Methicillin-resistant Staphylococcus aureus (MRSA) is an extensive origin of nosocomial infections that are very much challenging as well as complicated to eradicate mostly due to their strong resistance against all existing antibiotic therapies. Here the chitosan-grafted-polycaprolactone/maleic anhydride-pyrazinamide (CS-g-PCL/MA-PZA) polymeric drug carrier constructed via dialysis for anti-MRSA drugs like rifampicin (RF) and pyrazinamide (PZA) delivery. Nearly 200 nm size of the spherical particle with -20.04 mV of zeta potential observed. The cumulative PZA and RF releases from the carrier were observed 83.25% and 76.54% respectively in pH 5.5, and the in vitro drug release profile demonstrates that the fabricated micelle was pH-responsive. For the intestinal colonization, an in vivo assay performed using C. elegans, and the CS-g-PCL/MA-PZA/RF micelles treated worms generally belong to the weakly colonized category. Therefore, the study revealed that CS-g-PCL/MA-PZA/RF micelle could be a promising approach for therapeutic applications to achieve efficient anti-MRSA drug delivery.

Inhibition of methicillin-resistant Staphylococcus aureus (MRSA) biofilm by cationic poly (D, L-lactide-co-glycolide) nanoparticles

The emergent need for new treatment methods for multi-drug resistant pathogens such as methicillin-resistant Staphylococcus aureus (MRSA) has focused attention on novel potential tools like nanoparticles (NPs). In the present study, a drug-free cationic nanoparticles (CNPs) system was developed and its anti-MRSA effects were firstly investigated. The results showed that CNPs (261.7 nm, 26.1 mv) showed time- and concentration-dependent activity against MRSA growth, killing ∼ 90% of planktonic bacterial cells in 3 h at 400 μg ml^-1, and completely inhibiting biofilm formation at 1000 μg ml^-1. Moreover, CNPs at 400 μg ml^-1 reduced the minimum inhibitory concentration (MIC) of vancomycin on inhibition of planktonic MRSA growth (∼ 25%) and biofilm formation (∼ 50%). The CNPs-bacteria interaction force was up to 22 nN. Overall, these data suggest that CNPs have a good potential in clinical applications for the prevention and treatment of MRSA infection.

Development and Characterization of Glipizide Loaded Sustained Release Nanoparticles

Background:

Treating the disease like diabetes is essential due to its wide range of spreading and heredity issues. Glipizide is the commonly used drug for the treatment of diabetes. Glipizide loaded sustained release nanoparticles have been developed to avoid repeated dosing.

Objective:

The study aimed to develop glipizide-loaded sustained release nanoparticles and characterize them for different studies.

Methods:

The aim of the present study was to develop glipizide-loaded sustained release nanoparticles using different polymers by the solvent evaporation method. The polymers; Eudragit (RS 100) in combination with Polycaprolactone (PCL) were used to encapsulate glipizide. Optimization of all parameters was performed as per Design Expert software by utilizing a 32 full factorial design. The developed nanoparticles were characterized using Fourier transformed infrared spectroscopy, X-ray diffraction, scanning electron microscopy and in-vitro drug release study.

Results:

FE-SEM showed that the surface morphology of nanoparticles was smooth and spherical as well as in an oval shape. FTIR shows there is no interaction between polymers and drug. XRD results showed that the crystallinity of pure glipizide reduced from 89.5 to 56.7% when converted into sustained release nanoparticles formulation. Sustained drug release over the period of 12 h was observed due to well encapsulation of glipizide by the polymers.

Conclusion:

Glipizide loaded nanoparticles were developed with good encapsulation efficiency using a combination of two different biocompatible polymers. The drug release behavior showed that they can be used to develop the sustained release formulation to reduce the side effect caused by over drug uptake as compared to the conventional formulation.

Recent advances in musculoskeletal local drug delivery

Musculoskeletal disorders are a significant burden on the global economy and public health. Advanced drug delivery plays a key role in the musculoskeletal field and holds the promise of enhancing the repair of degenerated and injured musculoskeletal tissues. Ideally, drug delivery should have the ability to directly deliver therapeutic agents to the diseased/injured sites with a desirable drug level over a period of time. Here, we present a mini-review of the current state-of-the-art research associated with local drug delivery and its use for the treatment of musculoskeletal disorders. First, an overview of drug delivery strategies, with a focus on issues related to musculoskeletal pathology, potential therapeutic strategies, conventional and non-conventional drugs, and various delivery systems, is introduced. Then, we highlight recent advances in the emerging fields of musculoskeletal local drug delivery, involving therapeutic drugs (e.g., genes, small molecule therapeutics, and stem cells), novel delivery vehicles (e.g., 3D printing and tissue engineering techniques), and innovative delivery approaches (e.g., multi-drug delivery and smart stimuli-responsive delivery). The review concludes with future perspectives and associated challenges for developing local drug delivery for musculoskeletal applications. STATEMENT OF SIGNIFICANCE: Three important aspects are highlighted in this manuscript: 1) The advanced musculoskeletal drug delivery is introduced from the aspects ranging from musculoskeletal disorders, potential therapeutic solutions, and various drug delivery systems. 2) The recent advances in the emerging fields of musculoskeletal local drug delivery, involving therapeutic drugs (e.g., genes, small molecule therapeutics, and stem cells), novel delivery vehicles (e.g., 3D printing and tissue engineering technique), and innovative delivery approaches (e.g., multi-drug delivery and smart stimuli-responsive delivery), are highlighted. 3) The challenges and perspectives of future research directions in the development of musculoskeletal local drug delivery are presented.

Modulating the crystallinity, mechanical properties, and degradability of poly(ε-caprolactone) derived polyesters by statistical and alternating copolymerization

Functionalization of PCL analogues in statistical and alternating manner modulates the thermal, physical and mechanical properties.

Sustained release of herbal drugs using biodegradable scaffold for faster wound healing and better patient compliance

Electrospun scaffold has been developed using biodegradable polymer and age old herbal drug for efficient wound healing patch with much better patient compliance. Positively charged smaller particle size (40 nm) of the drug has been prepared for greater penetration through epidermal barrier to enhance the wound healing activity of drug. Controlled drug release has been understood in terms of interactions between the components through spectroscopic techniques and calorimetric studies. In-vivo study using albino rats shows better wound healing efficiency of scaffold in terms of higher wound area contraction, minimum inflammation, faster epithelialization and vascularization. Cellular studies also endorse the scaffold as better biomaterial. Clinical studies also demonstrate fast healing of different type of wounds in presence of all three wound dressing materials with histological evidences. The complete biodegradation of the patch confirms its green nature of the developed patch.

Emerging Nanomedicine Therapies to Counter the Rise of Methicillin-Resistant Staphylococcus aureus

In a recent report, the World Health Organisation (WHO) classified antibiotic resistance as one of the greatest threats to global health, food security, and development. Methicillin-resistant Staphylococcus aureus (MRSA) remains at the core of this threat, with persistent and resilient strains detectable in up to 90% of S. aureus infections. Unfortunately, there is a lack of novel antibiotics reaching the clinic to address the significant morbidity and mortality that MRSA is responsible for. Recently, nanomedicine strategies have emerged as a promising therapy to combat the rise of MRSA. However, these approaches have been wide-ranging in design, with few attempts to compare studies across scientific and clinical disciplines. This review seeks to reconcile this discrepancy in the literature, with specific focus on the mechanisms of MRSA infection and how they can be exploited by bioactive molecules that are delivered by nanomedicines, in addition to utilisation of the nanomaterials themselves as antibacterial agents. Finally, we discuss targeting MRSA biofilms using nano-patterning technologies and comment on future opportunities and challenges for MRSA treatment using nanomedicine.

Antimicrobial Properties and Osteogenicity of Vancomycin-Loaded Synthetic Scaffolds Obtained by Supercritical Foaming

Advanced porous synthetic scaffolds are particularly suitable for regeneration of damaged tissues, but there is the risk of infections due to the colonization of microorganisms, forming biofilms. Supercritical foaming is an attractive processing method to prepare bone scaffolds, regulating simultaneously the porosity and loading of bioactive compounds without loss of activity. In this work, scaffolds made of poly-ε-caprolactone (50 kDa), containing chitosan and an antimicrobial agent (vancomycin), were processed by supercritical CO₂ foaming for bone regeneration purposes. The obtained scaffolds showed a suitable combination of morphological (porosity, pore size distribution, and interconnectivity), time-dependent in vitro vancomycin release behavior and biological properties (cell viability and proliferation, osteodifferentiation, and tissue-scaffold integration). The scaffolds sustained vancomycin release for more than 2 weeks. Finally, the antimicrobial activity of the scaffolds was tested against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria after 24 h of incubation with full growth inhibition for S. aureus.

Engineered Cellular Uptake and Controlled Drug Delivery Using Two Dimensional Nanoparticle and Polymer for Cancer Treatment

Two major problems in chemotherapy, poor bioavailability of hydrophobic anticancer drug and its adverse side effects causing nausea, are taken into account by developing a sustained drug release vehicle along with enhanced bioavailability using two-dimensional layered double hydroxides (LDHs) with appropriate surface charge and its subsequent embedment in polymer matrix. A model hydrophobic anticancer drug, raloxifene hydrochloride (RH), is intercalated into a series of zinc iron LDHs with varying anion charge densities using an ion exchange technique. To achieve significant sustained delivery, drug-intercalated LDH is embedded in poly(ε-caprolactone) (PCL) matrix to develop intravenous administration and to improve the therapeutic index of the drug. The cause of sustained release is visualized from the strong interaction between LDH and drug, as measured through spectroscopic techniques, like X-ray photoelectron spectroscopy, infrared, UV-visible spectroscopy, and thermal measurement (depression of melting temperature and considerable reduction in heat of fusion), using differential scanning calorimeter, followed by delayed diffusion of drug from polymer matrix. Interestingly, polymer nanohybrid exhibits long-term and excellent in vitro antitumor efficacy as opposed to pure drug or drug-intercalated LDH or only drug embedded PCL (conventional drug delivery vehicle) as evident from cell viability and cell adhesion experiments prompting a model depicting greater killing efficiency (cellular uptake) of the delivery vehicle (polymer nanohybrid) controlled by its better cell adhesion as noticed through cellular uptake after tagging of fluorescence rhodamine B separately to drug and LDH. In vivo studies also confirm the sustained release of drug in the bloodstream of albino rats using polymer nanohybrid (novel drug delivery vehicle) along with a healthy liver vis-à-vis burst release using pure drug/drug-intercalated LDHs with considerable damaged liver.

Cilostazol-Loaded Poly(ε-Caprolactone) Electrospun Drug Delivery System for Cardiovascular Applications

PURPOSE

The study discusses the value of electrospun cilostazol-loaded (CIL) polymer structures for potential vascular implant applications.

METHODS

Biodegradable polycaprolactone (PCL) fibers were produced by electrospinning on a rotating drum collector. Three different concentrations of CIL: 6.25%, 12.50% and 18.75% based on the amount of polymer, were incorporated into the fibers. The fibers were characterized by their size, shape and orientation. Materials characterization was carried out by Fourier Transformed Infrared spectroscopy (FTIR), Raman spectroscopy, differential scanning calorimetry (DSC) and X-ray diffraction (XRD). In vitro drug release study was conducted using flow-through cell apparatus (USP 4).

RESULTS

Three-dimensional structures characterized by fibers diameter ranging from 0.81 to 2.48 μm were in the range required for cardiovascular application. DSC and XRD confirmed the presence of CIL in the electrospun fibers. FTIR and Raman spectra confirmed CIL polymorphic form. Elastic modulus values for PCL and the CIL-loaded PCL fibers were in the range from 0.6 to 1.1 GPa. The in vitro release studies were conducted and revealed drug dissolution in combination with diffusion and polymer relaxation as mechanisms for CIL release from the polymer matrix.

CONCLUSIONS

The release profile of CIL and nanomechanical properties of all formulations of PCL fibers demonstrate that the cilostazol loaded PCL fibers are an efficient delivery system for vascular implant application.

Influence of Chain Length on the Self-Assembly of Poly(ε-caprolactone)-Grafted Graphene Quantum Dots

The multifarious applications of graphene quantum dots (GQDs) necessitate surface modifications to enhance their solution processability. Herein, we report the synthesis and self-assembly of GQDs grafted with poly(ε-caprolactone) (PCL) of different degrees of polymerization (3, 7, 15, and 21) produced from ring-opening polymerization. Optical and morphological studies unveil the transformation of the assemblies from J-aggregates to H-aggregates, accompanied by an alteration in morphology from toroid to spheroid to rodlike structures with increasing chain length of PCL. Functionalized GQDs with lower chain lengths of PCL at higher concentration also assemble into liquid-crystalline phases as observed from birefringent textures, which are later correlated to the formation of columnar hexagonal (Col_h) mesophases. However, no such behavior is observed at higher chain lengths of PCL under identical conditions. Therefore, it is evident that the variation in the PCL chain length plays a crucial role in the self-assembly, which is primarily triggered by the van der Waals force between the polymer chains dictating the π stacking of GQDs, resulting in different self- aggregated behavior.

Dual-responsive core-crosslinked polyphosphoester-based nanoparticles for pH/redox-triggered anticancer drug delivery

The paper focuses on the preparation of biodegradable pH/redox dual-responsive core-crosslinked nanoparticles loaded with dual anticancer drugs PTX and DOX via synergetic electrostatic as well as hydrophobic interactions and their further application in tumor chemotherapy.

Retracted Article: A polyurethane–chitosan brush as an injectable hydrogel for controlled drug delivery and tissue engineering

Hydrogels and porous lyophilized hydrogels have been designed using a polyurethane brush with a chitosan backbone through grafting for controlled drug delivery.

3D printed poly(ε-caprolactone) scaffolds modified with hydroxyapatite and poly(propylene fumarate) and their effects on the healing of rabbit femur defects

3D printed, BMSC seeded PCL/HAp/PPF scaffolds presented significant regeneration with high mechanical properties similar to that of healthy bone.