Breaking the pH Limitation of Nanozymes: Mechanisms, Methods, and Applications

Although nanozymes have drawn great attention over the past decade, the activities of peroxidase-like, oxidase-like, and catalase-like nanozymes are often pH dependent with elusive mechanism, which largely restricts their application. Therefore, a systematical discussion on the pH-related catalytic mechanisms of nanozymes together with the methods to overcome this limitation is in need. In this review, various nanozymes exhibiting pH-dependent catalytic activities are collected and the root causes for their pH dependence are comprehensively analyzed. Subsequently, regulatory concepts including catalytic environment reconstruction and direct catalytic activity improvement to break this pH restriction are summarized. Moreover, applications of pH-independent nanozymes in sensing, disease therapy, and pollutant degradation are overviewed. Finally, current challenges and future opportunities on the development of pH-independent nanozymes are suggested. It is anticipated that this review will promote the further design of pH-independent nanozymes and broaden their application range with higher efficiency.

Effect of Phosphorus Modulation in Iron Single-Atom Catalysts for Peroxidase Mimicking

Fe-N-C single-atom catalysts (SACs) exhibit excellent peroxidase (POD)-like catalytic activity, owing to their well-defined isolated iron active sites on the carbon substrate, which effectively mimic the structure of natural peroxidase's active center. To further meet the requirements of diverse biosensing applications, SAC POD-like activity still needs to be continuously enhanced. Herein, a phosphorus (P) heteroatom is introduced to boost the POD-like activity of Fe-N-C SACs. A 1D carbon nanowire (FeNCP/NW) catalyst with enriched Fe-N4 active sites is designed and synthesized, and P atoms are doped in the carbon matrix to affect the Fe center through long-range interaction. The experimental results show that the P-doping process can boost the POD-like activity more than the non-P-doped one, with excellent selectivity and stability. The mechanism analysis results show that the introduction of P into SAC can greatly enhance POD-like activity initially, but its effect becomes insignificant with increasing amount of P. As a proof of concept, FeNCP/NW is employed in an enzyme cascade platform for highly sensitive colorimetric detection of the neurotransmitter acetylcholine.

Co-based Nanozymatic Profiling: Advances Spanning Chemistry, Biomedical, and Environmental Sciences

Nanozymes, next-generation enzyme-mimicking nanomaterials, have entered an era of rational design; among them, Co-based nanozymes have emerged as captivating players over times. Co-based nanozymes have been developed and have garnered significant attention over the past five years. Their extraordinary properties, including regulatable enzymatic activity, stability, and multifunctionality stemming from magnetic properties, photothermal conversion effects, cavitation effects, and relaxation efficiency, have made Co-based nanozymes a rising star. This review presents the first comprehensive profiling of the Co-based nanozymes in the chemistry, biology, and environmental sciences. The review begins by scrutinizing the various synthetic methods employed for Co-based nanozyme fabrication, such as template and sol-gel methods, highlighting their distinctive merits from a chemical standpoint. Furthermore, a detailed exploration of their wide-ranging applications in biosensing and biomedical therapeutics, as well as their contributions to environmental monitoring and remediation is provided. Notably, drawing inspiration from state-of-the-art techniques such as omics, a comprehensive analysis of Co-based nanozymes is undertaken, employing analogous statistical methodologies to provide valuable guidance. To conclude, a comprehensive outlook on the challenges and prospects for Co-based nanozymes is presented, spanning from microscopic physicochemical mechanisms to macroscopic clinical translational applications.

A visualized sensor based on layered double hydroxides with peroxidase-like activity for sensitive acetylcholinesterase assay

Acetylcholinesterase (AChE) plays a crucial role in biological neurotransmission. The aberrant expression of AChE is associated with various neurodegenerative diseases. Therefore, it is of great significance to develop a simple and highly sensitive AChE analysis platform. Herein, a simple colorimetric sensor was constructed for sensitive detection of AChE based on the peroxidase-like catalytic activity of Ni/Co layered double hydroxides (Ni/Co LDHs). In this sensor, the fabricated Ni/Co LDHs possess high peroxidase-like activity, enabling rapid catalysis of o-phenylenediamine (OPD) to produce yellow oxOPD in the presence of H₂O₂. This peroxidase-like activity of Ni/Co LDHs was found to be effectively inhibited by the presence of AChE. It is speculated that the combination of AChE on the outer surface of Ni/Co LDHs through non-covalent interaction may cover the active sites and hinder their adsorption to the substrates, leading to the failure of OPD oxidation. As a result, the yellow color from oxOPD is related to the AChE concentration, enabling the direct AChE assay in an equipment-free manner. In addition, the fabricated Ni/Co LDHs could be modified on a paper surface to obtain a paper-based analytical device for visualized colorimetric detection of AChE. The as-proposed sensor shows high sensitivity to AChE with a detection limit down to 6.6 μU mL^-1. Therefore, this naked-eye paper-based sensor is capable of on-site and real-time detection of AChE, and has outstanding application prospects in clinical diagnosis and biomedical fields.

Nanozyme's catalytic activity at neutral pH: reaction substrates and application in sensing

Nanozymes exhibit their great potential as alternatives to natural enzymes. In addition to catalytic activity, nanozymes also need to have biologically relevant catalytic reactions at physiological pH to fit in the definition of an enzyme and to achieve efficient analytical applications. Previous reviews in the nanozyme field mainly focused on the catalytic mechanisms, activity regulation, and types of catalytic reactions. In this paper, we discuss efforts made on the substrate-dependent catalytic activity of nanozymes at neutral pH. First, the discrepant catalytic activities for different substrates are compared, where the key differences are the characteristics of substrates and the adsorption of substrates by nanozymes at different pH. We then reviewed efforts to enhance reaction activity for model chromogenic substrates and strategies to engineer nanomaterials to accelerate reaction rates for other substrates at physiological pH. Finally, we also discussed methods to achieve efficient sensing applications at neutral pH using nanozymes. We believe that the nanozyme is catching up with enzymes rapidly in terms of reaction rates and reaction conditions. Designing nanozymes with specific catalysis for efficient sensing remains a challenge.

Advances in layered double hydroxide based labels for signal amplification in ultrasensitive electrochemical and optical affinity biosensors of glucose

Since the development of enzyme electrodes, the research area of glucose biosensing has seen outstanding progress and improvement. Numerous sensing platforms have been developed based on different immobilization techniques and improved electron transfer between the enzyme and electrode. Interestingly, these platforms have consistently used innovative nanostructures and nanocomposites. In recent years, layered double hydroxides (LDHs) have become key tools in the field of analytical chemistry owing to their outstanding features and benefits, such as facile synthesis, cost-effectiveness, substantial surface area, excellent catalytic performance, and biocompatibility. LDHs are often synthesized as nanomaterial composites or manufactured with specific three-dimensional structures. The purpose of this review is to illustrate the biosensing prospects of LDH-based glucose sensors and the need for improvement. First, various clinical and conventional approaches for glucose determination are discussed. The definitions, types, and various synthetic methodologies of LDHs are then explained. Subsequently, we discuss the various research studies regarding LDH-based electrochemical and optical assays, focusing on modified systems, improved electron transfers pathways (through developments in surface science), and different sensing designs based on nanomaterials. Finally, a summary of the current limitations and future challenges in glucose analysis is described, which may facilitate further development and applications.

Nanozyme-based colorimetric biosensor with a systemic quantification algorithm for noninvasive glucose monitoring

Diabetes mellitus accompanies an abnormally high glucose level in the bloodstream. Early diagnosis and proper glycemic management of blood glucose are essential to prevent further progression and complications. Biosensor-based colorimetric detection has progressed and shown potential in portable and inexpensive daily assessment of glucose levels because of its simplicity, low-cost, and convenient operation without sophisticated instrumentation. Colorimetric glucose biosensors commonly use natural enzymes that recognize glucose and chromophores that detect enzymatic reaction products. However, many natural enzymes have inherent defects, limiting their extensive application. Recently, nanozyme-based colorimetric detection has drawn attention due to its merits including high sensitivity, stability under strict reaction conditions, flexible structural design with low-cost materials, and adjustable catalytic activities. This review discusses various nanozyme materials, colorimetric analytic methods and mechanisms, recent machine learning based analytic methods, quantification systems, applications and future directions for monitoring and managing diabetes.

2D material-based peroxidase-mimicking nanozymes: catalytic mechanisms and bioapplications

The boom in nanotechnology brings new insights into the development of artificial enzymes (nanozymes) with ease of modification, lower manufacturing cost, and higher catalytic stability than natural enzymes. Among various nanomaterials, two-dimensional (2D) nanomaterials exhibit promising enzyme-like properties for a plethora of bioapplications owing to their unique physicochemical characteristics of tuneable composition, ultrathin thickness, and huge specific surface area. Herein, we review the recent advances in several 2D material-based nanozymes, such as carbonaceous nanosheets, metal-organic frameworks (MOFs), transition metal dichalcogenides (TMDs), layered double hydroxides (LDHs), and transition metal oxides (TMOs), clarify the mechanisms of peroxidase (POD)-mimicking catalytic behaviors, and overview the potential bioapplications of 2D nanozymes.

An overview of recent analysis and detection of acetylcholine

Acetylcholine (ACh), the major neurotransmitter secreted by cholinergic neurons, is widely found in the peripheral and central nervous systems, and its main function is to complete the transmission of neural signals. When cholinergic neurons are impaired, the synthesis and decomposition of ACh are abnormal and the neural signalling transition is blocked. To some extent, the concentration changes of ACh reflects the occurrence and development of many kinds of nervous system diseases, such as Alzheimer's disease, Parkinson's disease, Myasthenia gravis and so on. Thus, researches of the physiological and pathological roles and the tracking of the concentration changes of ACh in vivo are significant to the prevention and treatment of these diseases. In the paper, the pathophysiological functions and the comprehensive research progress on detection methods of ACh are summarized. Specifically, the latest research and related applications of the optical and electrochemical biosensors are described, and the future development directions and challenges are prospected, which provides a reference for the detection and applications of ACh.

Recent progress in the design of analytical methods based on nanozymes

Nanomaterials with intrinsic enzyme-like properties (nanozymes) have attracted growing interest owing to their striking merits over the traditional enzymes, such as low cost, easy surface modification, high stability and robustness, and tunable activity. These features enable them to be considered as a potent substitute for natural enzymes to construct novel analytical platforms to detect various analytes from small molecules to proteins and cells. In this review, we focus on recent advances in the design strategies using nanozyme catalytic mediated signal amplification for sensing applications. The progress of nanozyme-based analytical systems in the detection of different types of analytes, including ions, small biomolecules, biomacromolecules and others, is summarized. Furthermore, the future challenges and opportunities of nanozyme-based analytical methods are discussed.

Highly Sensitive Fluorescent Detection of Acetylcholine Based on the Enhanced Peroxidase-Like Activity of Histidine Coated Magnetic Nanoparticles

Inspired by the active site structure of natural horseradish peroxidase having iron as a pivotal element with coordinated histidine residues, we have developed histidine coated magnetic nanoparticles (His@MNPs) with relatively uniform and small sizes (less than 10 nm) through one-pot heat treatment. In comparison to pristine MNPs and other amino acid coated MNPs, His@MNPs exhibited a considerably enhanced peroxidase-imitating activity, approaching 10-fold higher in catalytic reactions. With the high activity, His@MNPs then were exploited to detect the important neurotransmitter acetylcholine. By coupling choline oxidase and acetylcholine esterase with His@MNPs as peroxidase mimics, target choline and acetylcholine were successfully detected via fluorescent mode with high specificity and sensitivity with the limits of detection down to 200 and 100 nM, respectively. The diagnostic capability of the method is demonstrated by analyzing acetylcholine in human blood serum. This study thus demonstrates the potential of utilizing His@MNPs as peroxidase-mimicking nanozymes for detecting important biological and clinical targets with high sensitivity and reliability.

A review on optical sensors based on layered double hydroxides nanoplatforms

In recent years, significant efforts have been devoted towards the fabrication and application of layered double hydroxides (LDHs) due to their tremendous features such as excellent biocompatibility with negligible toxicity, large surface area, high conductivity, excellent solubility, and ion exchange properties. Most impressive, LDHs offer a favorable environment to attach several substances such as quantum dots, fluorescein dyes, proteins, and enzymes, which leads to strengthening the catalytic properties or increasing the sensing selectivity and sensitivity of the resulted hybrids. With the extensive ongoing research on the application of nanomaterials, many studies have led to remarkable achievements in exploring LDHs as sensing nanoplatforms. In optical sensors, for instance, many sensing strategies were tailored based on the enzyme-mimicking properties of LDHs, including colorimetric and chemiluminescence procedures. Meanwhile, others were designed based on intercalating some fluorogenic substrates on the LDHs, whereby the sensing signal can be acquired by quenching or enhancing their fluorescence after the addition of analytes. In this review, we aim to summarize the recent advances in optical sensors that use layered double hydroxides as sensing platforms for the determination of various analytes. By outlining some representative examples, we accentuate the change of spectral absorbance, chemiluminescence, and photoluminescence phenomena triggered by the interaction of LDH or functionalized-LDH with the indicators and analytes in the system. And finally, current limitations and possible future orientation in designing further LDHs-based optical sensors are presented. It is hoped that this review will be helpful in assisting the establishment of more improved sensors based on LDHs features. Optical sensors based on layered double hydroxides (LDHs) nanoplatforms were reviewed. The sensing system and detection approaches were rationally reviewed. Possible future orientations were highlighted.

Ultrathin NiMn layered double hydroxide nanosheets with a superior peroxidase mimicking performance to natural HRP for disposable paper-based bioassays

Ultrathin NiMn LDH was synthesized as a nanozyme for disposable paper-based bioassays, and its active centers were identified as Mn sites.

Layered Double Hydroxides in Bioinspired Nanotechnology

Layered Double Hydroxides (LDHs) are a relevant class of inorganic lamellar nanomaterials that have attracted significant interest in life science-related applications, due to their highly controllable synthesis and high biocompatibility. Under a general point of view, this class of materials might have played an important role for the origin of life on planet Earth, given their ability to adsorb and concentrate life-relevant molecules in sea environments. It has been speculated that the organic–mineral interactions could have permitted to organize the adsorbed molecules, leading to an increase in their local concentration and finally to the emergence of life. Inspired by nature, material scientists, engineers and chemists have started to leverage the ability of LDHs to absorb and concentrate molecules and biomolecules within life-like compartments, allowing to realize highly-efficient bioinspired platforms, usable for bioanalysis, therapeutics, sensors and bioremediation. This review aims at summarizing the latest evolution of LDHs in this research field under an unprecedented perspective, finally providing possible challenges and directions for future research.

An optical sensing platform based on hexacyanoferrate intercalated layered double hydroxide nanozyme for determination of chromium in water

In this work, hexacyanoferrate intercalated Ni/Al LDH (Ni/Al-Fe(CN)₆ LDH) nanozyme was synthesized by one-pot co-precipitation method and used for determination of chromium in water samples by employing its peroxidase mimicking activity. The synthesized nanozyme can effectively catalyze the oxidation of fluorometric peroxidase substrate terephthalic acid by H₂O₂ to produce a highly fluorescent product. It was found that Cr(VI) promotes the peroxidase-like activity of Ni/Al-Fe(CN)₆ LDH and this effect was intensified by increasing the Cr(VI) concentration. Several variables affecting the fluorescence intensity including the concentration of nanoparticles and reagents as well as reaction time were investigated and optimized. Under the optimal conditions, good linearity was observed in the range of 0.067-10 μM Cr(VI), and limit of detection and quantification were found to be 0.039 and 0.131 μM, respectively. Furthermore, the developed method showed good applicability for the determination of total Cr based on the oxidation of Cr (III) to Cr (VI). The applicability of the proposed method was demonstrated by analyzing various environmental water samples. The presented nanozyme displayed superior benefits in terms of reusability, repeatability, cost and environment-friendly features. The present work aims to expand LDHs based enzyme mimics to optical sensor fields.

Nanozymes for medical biotechnology and its potential applications in biosensing and nanotherapeutics

Recent past years have witnessed the development of several artificial enzymes, using different materials to mimic natural enzymes with respect to their structure and functions. The nanozymes are nanomaterials possessing similar characteristics to the natural enzymes and have emerged recently as an innovative class of artificial enzymes. The nanozymes have got remarkable attention from the researchers and notable developments have been achieved owing to their unique properties compared with natural enzymes and classic artificial enzymes. In this regard, several nanomaterials have been scrutinized so far to mimic different natural enzymes for wider applications ranging from imaging, sensing, water treatment, pollutant removal, and therapeutics. The applications of nanozymes in biomedicine research are fast-growing and various nanozymes have been implicated in diagnostic medicine, targeted cancer therapy. Such abilities make them an appropriate alternative for the development of affordable, sustainable and safe diagnostic as well as therapeutic agents.

Identifying the active site of ultrathin NiCo LDH as an efficient peroxidase mimic with superior substrate affinity for sensitive detection of hydrogen peroxide

Nanozymes have been extensively investigated to imitate protein enzymes in biomimetic chemistry and the identification of the active site is believed to be the pre-requisite before one can effectively regulate their activity. Herein, ultrathin NiCo LDH nanosheets are synthesized via a fast co-precipitation at room temperature and can be stably dispersed in water without any additives of surfactants or organic solvents. By tuning the ratio between Ni and Co in LDH nanosheets, the activity is tuned and their peroxidase-like activity is determined by Co sites that show higher affinity to both 3,3',5,5'-tetramethylbenzidine (TMB) and hydrogen peroxide (H2O2) due to the strong Lewis acidity of Co3+ and the low redox potential of Co3+/Co2+. Together with their small crystallite size, ultra-thin thickness and tunable composition, NiCo LDH is used as a nanozyme for highly sensitive colorimetric detection of H2O2 and the limit of detection (LOD) reaches 0.48 μM.

A Tumor-Microenvironment-Activated Nanozyme-Mediated Theranostic Nanoreactor for Imaging-Guided Combined Tumor Therapy

Activatable theranostic agents that can be activated by tumor microenvironment possess higher specificity and sensitivity. Here, activatable nanozyme-mediated 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) loaded ABTS@MIL-100/poly(vinylpyrrolidine) (AMP) nanoreactors (NRs) are developed for imaging-guided combined tumor therapy. The as-constructed AMP NRs can be specifically activated by the tumor microenvironment through a nanozyme-mediated "two-step rocket-launching-like" process to turn on its photoacoustic imaging signal and photothermal therapy (PTT) function. In addition, simultaneously producing hydroxyl radicals in response to the high H₂ O₂ level of the tumor microenvironment and disrupting intracellular glutathione (GSH) endows the AMP NRs with the ability of enhanced chemodynamic therapy (ECDT), thereby leading to more efficient therapeutic outcome in combination with tumor-triggered PTT. More importantly, the H₂ O₂ -activated and acid-enhanced properties enable the AMP NRs to be specific to tumors, leaving the normal tissues unharmed. These remarkable features of AMP NRs may open a new avenue to explore nanozyme-involved nanoreactors for intelligent, accurate, and noninvasive cancer theranostics.

Magnetic Nanoparticles: Current Trends and Future Aspects in Diagnostics and Nanomedicine

Background:

Biomedical applications of Magnetic Nanoparticles (MNPs) are creating a major impact on disease diagnosis and nanomedicine or a combined platform called theranostics. A significant progress has been made to engineer novel and hybrid MNPs for their multifunctional modalities such as imaging, biosensors, chemotherapeutic or photothermal and antimicrobial agents. MNPs are successfully applied in biomedical applications due to their unique and tunable properties such as superparamagnetism, stability, and biocompatibility. Approval of ferumoxytol (feraheme) for MRI and the fact that several Superparamagnetic Iron Oxide Nanoparticles (SPIONs) are currently undergoing clinical trials have paved a path for future MNPs formulations. Intensive research is being carried out in designing and developing novel nanohybrids for multiple applications in nanomedicine.

Objective:

The objective of the present review is to summarize recent developments of MNPs in imaging modalities like MRI, CT, PET and PA, biosensors and nanomedicine including their role in targeting and drug delivery. Relevant theory and examples of the use of MNPs in these applications have been cited and discussed to create a thorough understanding of the developments in this field.

Conclusion:

MNPs have found widespread use as contrast agents in imaging modalities, as tools for bio-sensing, and as therapeutic and theranostics agents. Multiple formulations of MNPs are in clinical testing and may be accepted in clinical settings in near future.

Atomic layer deposition-assisted growth of CuAl LDH on carbon fiber as a peroxidase mimic for colorimetric determination of H2O2 and glucose

An atomic-layer-deposited Al₂O₃-induced LDH growth strategy was proposed to prepare carbon fiber-supported ultrathin CuAl LDH nanosheets (CF@CuAl-LDH). The CF@CuAl-LDH exhibited superior peroxidase-like catalytic activity.

Nanomaterials with enzyme-like characteristics (nanozymes): next-generation artificial enzymes (II)

An updated comprehensive review to help researchers understand nanozymes better and in turn to advance the field.

Functional nanomaterials with unique enzyme-like characteristics for sensing applications

We highlight the recent developments in functional nanomaterials with unique enzyme-like characteristics for sensing applications.

Umbelliferone as a Small Molecular Peroxidase Mimic towards Sensitive Detection of H2O2 and Glucose

In this work, umbelliferone, a kind of coumarin derivative, was proved to exhibit peroxidase-like activity that could catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of hydrogen peroxide to generate a blue-colored oxide (oxTMB). The catalytic mechanism is similar to that of native enzymes (e.g. horseradish peroxidase, HRP) and nanozymes, which follow the Michaelis-Menten kinetics behavior. Meanwhile, the 7-hydroxyl group of umbelliferone plays a significant role in the peroxidase-like activity. Compared with enzymes and nanozymes, this small molecular mimic enzyme possesses the advantages of low cost, simple molecular structures, small molecular weight and high stability against harsh conditions. Based on the favorable peroxidase mimetic activity of umbelliferone, a convenient, practical and sensitive H₂O₂ and glucose detection method was successfully established. This work not only opens some new inspirations into seeking for novel molecular enzyme mimetics with excellent catalytic activities, but also provides promising assays for clinical diagnosis.

Dichlorofluorescein as a peroxidase mimic and its application to glucose detection

DCF as a new peroxidase mimic could decompose H₂O₂ to generate ˙OH radicals, which could oxidize the peroxidase substrate TMB.

Cu@Ni core–shell nanoparticles/reduced graphene oxide nanocomposites for nonenzymatic glucose sensor

Cu@Ni core–shell nanoparticle decorated reduced graphene oxide nanocomposites are prepared and further employed as a novel sensing material for fabricating a sensitive nonenzymatic glucose sensor with excellent performance for glucose.