A biomaterial approach to cell reprogramming and differentiation

Biophysical perspectives to understanding cancer-associated fibroblasts

The understanding of cancer has evolved significantly, with the tumor microenvironment (TME) now recognized as a critical factor influencing the onset and progression of the disease. This broader perspective challenges the traditional view that cancer is primarily caused by mutations, instead emphasizing the dynamic interaction between different cell types and physicochemical factors within the TME. Among these factors, cancer-associated fibroblasts (CAFs) command attention for their profound influence on tumor behavior and patient prognoses. Despite their recognized importance, the biophysical and mechanical interactions of CAFs within the TME remain elusive. This review examines the distinctive physical characteristics of CAFs, their morphological attributes, and mechanical interactions within the TME. We discuss the impact of mechanotransduction on CAF function and highlight how these cells communicate mechanically with neighboring cancer cells, thereby shaping the path of tumor development and progression. By concentrating on the biomechanical regulation of CAFs, this review aims to deepen our understanding of their role in the TME and to illuminate new biomechanical-based therapeutic strategies.

Neuronal Replenishment via Hydrogel-Rationed Delivery of Reprogramming Factors

The central nervous system's limited capacity for regeneration often leads to permanent neuronal loss following injury. Reprogramming resident reactive astrocytes into induced neurons at the site of injury is a promising strategy for neural repair, but challenges persist in stabilizing and accurately targeting viral vectors for transgene expression. In this study, we employed a bioinspired self-assembling peptide (SAP) hydrogel for the precise and controlled release of a hybrid adeno-associated virus (AAV) vector, AAVDJ, carrying the NeuroD1 neural reprogramming transgene. This method effectively mitigates the issues of high viral dosage at the target site, off-target delivery, and immunogenic reactions, enhancing the vector's targeting and reprogramming efficiency. In vitro, this vector successfully induced neuron formation, as confirmed by morphological, histochemical, and electrophysiological analyses. In vivo, SAP-mediated delivery of AAVDJ-NeuroD1 facilitated the trans-differentiation of reactive host astrocytes into induced neurons, concurrently reducing glial scarring. Our findings introduce a safe and effective method for treating central nervous system injuries, marking a significant advancement in regenerative neuroscience.

Reprogramming of Activated Pancreatic Stellate Cells via Mechanical Modulation of Transmembrane Force-sensitive N-cadherin Receptor

Cancer has been the leading cause of death due mainly to tumor metastasis. The tumor microenvironment plays a key role in tumor metastasis. As the main stromal cells in tumor microenvironment originated from activated fibroblast, cancer-associated fibroblasts (CAFs) play a major role in promoting tumor metastasis. A promising therapeutic avenue is reprogramming of CAFs into tumor-restraining quiescence state. In this study, we observed that CAF-like active pancreatic stellate cells (PSCs) interact with each other via N-cadherin, a force-sensitive transmembrane receptor. Since N-cadherin ligation mediated mechanotransduction has been reported to restrict integrin mediated signalling, we thus hypothesized that the reprogramming of activated PSCs by mechanical modulation of N-cadherin ligation might be possible. To test this hypothesis, we grafted N-cadherin ligand (HAVDI peptide) onto soft polyethylene glycol hydrogel substrate prior to cell adhesion to mimic cell-cell interaction via N-cadherin ligation. We found that the activated PSCs could be reprogrammed to their original quiescent state when transferred onto the substrate with immobilized HAVDI peptide. These results reveal a key role of mechanosensing by intercellular transmembrane receptor in reprogramming of activated PSCs, and provide a potential way for designing novel therapeutic strategies for cancer treatment.

Dual-Purpose 3D-Silica Nanostructure Matrix for Rapid Epigenetic Reprogramming of Tumor Cell to Cancer Stem Cell Spheroid

Cancer stem cells (CSCs), a rare subpopulation responsible for tumorigenesis and therapeutic resistance, are difficult to characterize and isolate. Conventional method of growing CSCs takes up to 2-8 weeks inhibiting the rate of research. Therefore, rapid reprogramming (RR) of tumor cells into CSCs is crucial to accelerate the stem cell oncology research. The current RR techniques cannot be utilized for CSC RR due to many limitations posed due to isolation requirements resulting in loss of vital data. Hence, a technique that can induce CSC RR without the need for isolation procedures is needed. Here, fabrication of a 3D-silica nanostructured extracellular matrix for RR and in situ monitoring is reported. The RR is tested using three preclinical cancer models. The 3D matrix and a zeta potential study confirm an intense material-cellular interaction resulting in the enhanced expressions of surface and epigenetic biomarkers. Cancer cells require only 3-day period to form CSC spheroids with 3D-silica extracellular matrix. Real-time single-cell monitoring of the methylene blue-induced photodynamic demonstrates the dual functionality. To the authors' knowledge, this is the first study to demonstrate a CSC epigenetic reprogramming using nanostructures. These findings may pave the path for accelerating the stem cell research in oncology.

Pushing the Natural Frontier: Progress on the Integration of Biomaterial Cues toward Combinatorial Biofabrication and Tissue Engineering

The engineering of fully functional, biological-like tissues requires biomaterials to direct cellular events to a near-native, 3D niche extent. Natural biomaterials are generally seen as a safe option for cell support, but their biocompatibility and biodegradability can be just as limited as their bioactive/biomimetic performance. Furthermore, integrating different biomaterial cues and their final impact on cellular behavior is a complex equation where the outcome might be very different from the sum of individual parts. This review critically analyses recent progress on biomaterial-induced cellular responses, from simple adhesion to more complex stem cell differentiation, looking at the ever-growing possibilities of natural materials modification. Starting with a discussion on native material formulation and the inclusion of cell-instructive cues, the roles of shape and mechanical stimuli, the susceptibility to cellular remodeling, and the often-overlooked impact of cellular density and cell-cell interactions within constructs, are delved into. Along the way, synergistic and antagonistic combinations reported in vitro and in vivo are singled out, identifying needs and current lessons on the development of natural biomaterial libraries to solve the cell-material puzzle efficiently. This review brings together knowledge from different fields envisioning next-generation, combinatorial biomaterial development toward complex tissue engineering.

Engineering Three-Dimensional Vascularized Cardiac Tissues

Heart disease is one of the largest burdens to human health worldwide and has very limited therapeutic options. Engineered three-dimensional (3D) vascularized cardiac tissues have shown promise in rescuing cardiac function in diseased hearts and may serve as a whole organ replacement in the future. One of the major obstacles in reconstructing these thick myocardial tissues to a clinically applicable scale is the integration of functional vascular networks capable of providing oxygen and nutrients throughout whole engineered constructs. Without perfusion of oxygen and nutrient flow throughout the entire engineered tissue not only is tissue viability compromised, but also overall tissue functionality is lost. There are many supporting technologies and approaches that have been developed to create vascular networks such as 3D bioprinting, co-culturing hydrogels, and incorporation of soluble angiogenic factors. In this state-of-the-art review, we discuss some of the most current engineered vascular cardiac tissues reported in the literature and future directions in the field. Impact statement The field of cardiac tissue engineering is rapidly evolving and is now closer than ever to having engineered tissue models capable of predicting preclinical responses to therapeutics, modeling diseases, and being used as a means of rescuing cardiac function following injuries to the native myocardium. However, a major obstacle of engineering thick cardiac tissue remains to be the integration of functional vasculature. In this review, we highlight seminal and recently published works that have influenced and pushed the field of cardiac tissue engineering toward achieving vascularized functional tissues.

Mg-Fe layered double hydroxides modified titanium enhanced the adhesion of human gingival fibroblasts through regulation of local pH level

The durability of dental implants is closely related to osseointegration and surrounding soft tissue sealing. Appropriate local pH favors fibroblasts adhesion and contributes to soft tissue sealing. Layered double hydroxides (LDHs) are characterized by adjustable alkalinity, offering a possibility to investigate the influence of pH on cellular behaviors. Herein, we fabricated MgFe LDHs modified titanium. During calcination, the local pH value of LDHs increase, without altering other physics and chemical properties via OH^- exchange mechanism. In vitro studies showed that LDHs films calcined at 250 °C for 2 h provide a local pH of 10.17, which promote early adhesion, proliferation, and type I collagen expression of human gingival fibroblasts (hGFs) through the formation of focal adhesion complex and activation of focal adhesion kinase related signaling pathways. In conclusion, endowing the titanium surface with appropriate alkalinity by MgFe LDHs films enhances the adhesion of hGFs, providing a new strategy of designing multifunctional biomaterials for soft tissue sealing around dental implants.

The International Society of RNA Nanotechnology and Nanomedicine (ISRNN): The Present and Future of the Burgeoning Field

The International Society of RNA Nanotechnology and Nanomedicine (ISRNN) hosts an annual meeting series focused on presenting the latest research achievements involving RNA-based therapeutics and strategies, aiming to expand their current biomedical applications while overcoming the remaining challenges of the burgeoning field of RNA nanotechnology. The most recent online meeting hosted a series of engaging talks and discussions from an international cohort of leading nanotechnologists that focused on RNA modifications and modulation, dynamic RNA structures, overcoming delivery limitations using a variety of innovative platforms and approaches, and addressing the newly explored potential for immunomodulation with programmable nucleic acid nanoparticles. In this Nano Focus, we summarize the main discussion points, conclusions, and future directions identified during this two-day webinar as well as more recent advances to highlight and to accelerate this exciting field.

Biomaterial-induced conversion of quiescent cardiomyocytes into pacemaker cells in rats

Pacemaker cells can be differentiated from stem cells or transdifferentiated from quiescent mature cardiac cells via genetic manipulation. Here we show that the exposure of rat quiescent ventricular cardiomyocytes to a silk-fibroin hydrogel activates the direct conversion of the quiescent cardiomyocytes to pacemaker cardiomyocytes by inducing the ectopic expression of the vascular endothelial cell-adhesion glycoprotein cadherin. The silk-fibroin-induced pacemaker cells exhibited functional and morphological features of genuine sinoatrial-node cardiomyocytes in vitro, and pacemaker cells generated via the injection of silk fibroin in the left ventricles of rats functioned as a surrogate in situ sinoatrial node. Biomaterials with suitable surface structure, mechanics and biochemistry could facilitate the scalable production of biological pacemakers for human use.

Enhanced efficiency of nonviral direct neuronal reprogramming on topographical patterns

Nonviral direct neuronal reprogramming holds significant potential in the fields of tissue engineering and regenerative medicine. However, the issue of low reprogramming efficiency poses a major barrier to its application. We propose that topographical cues, which have been applied successfully to enhance lineage-directed differentiation and multipotent stem cell transdifferentiation, could improve nonviral direct neuronal reprogramming efficiency. To investigate, we used a polymer-BAM (Brn2, Ascl1, Myt1l) factor transfection polypex to reprogram primary mouse embryonic fibroblasts. Using a multiarchitecture chip, we screened for patterns that may improve transfection and/or subsequent induced neuron reprogramming efficiency. Selected patterns were then investigated further by analyzing β-tubulin III (TUJ1) and microtubule-associated protein 2 (MAP2) protein expression, cell morphology and electrophysiological function of induced neurons. Certain hierarchical topographies, with nanopatterns imprinted on micropatterns, significantly improved the percentage of TUJ1+ and MAP2+ cells. It is postulated that the microscale base pattern enhances initial BAM expression while the nanoscale sub-pattern promotes subsequent maturation. This is because the base pattern alone increased expression of TUJ1 and MAP2, while the nanoscale pattern was the only pattern yielding induced neurons capable of firing multiple action potentials. Nanoscale patterns also produced the highest fraction of cells showing spontaneous synaptic activity. Overall, reprogramming efficiency with one dose of polyplex on hierarchical patterns was comparable to that of five doses without topography. Thus, topography can enhance nonviral direct reprogramming of fibroblasts into induced neurons.

Progress of Nanotechnology in Diabetic Retinopathy Treatment

Diabetic retinopathy (DR) is a chronic diabetes complication that progressively manifests itself as blurred vision, eye floaters, distorted vision, and even partial or total loss of vision as a result of retinal detachment in severe cases. Clinically, patients who have undergone variations in the microcirculation of the ocular fundus are treated with laser photocoagulation to improve the circulation of retina; but for patients with macular edema, anti-vascular endothelial growth factor (anti-VEGF) drugs are generally injected to eliminate macular edema and improve vision. The worst cases are patients with fundus hemorrhage or proliferative vitreoretinopathy, for whom vitrectomy has been performed. At present, these clinical treatment methods have widely been used, providing satisfactory results. However, considering the low bioavailability and potential side effects of drugs and the inevitable risks in major surgery, DR prevention, and treatment as well as nerve tissue regeneration in the later stage have always been the focus of research. In recent years, nanotechnology has been increasingly applied in the medical field, leading to new ideas for DR treatment. This study aims to systematically review the research progress of nanotechnology in DR treatment.

Cellular Delivery of Plasmid DNA into Wheat Microspores Using Rosette Nanotubes

Plant genetic engineering offers promising solutions to the increasing demand for efficient, sustainable, and high-yielding crop production as well as changing environmental conditions. The main challenge for gene delivery in plants is the presence of a cell wall that limits the transportation of genes within the cells. Microspores are plant cells that are, under the right conditions, capable of generating embryos, leading to the formation of haploid plants. Here, we designed cationic and fluorescent rosette nanotubes (RNTs) that penetrate the cell walls of viable wheat microspores under mild conditions and in the absence of an external force. These nanomaterials can capture plasmid DNA to form RNT-DNA complexes and transport their DNA cargo into live microspores. The nanomaterials and the complexes formed were nontoxic to the microspores.

Sequenced Somatic Cell Reprogramming and Differentiation Inside Nested Hydrogel Droplets

The efficient genesis of pluripotent cells or therapeutic cells for regenerative medicine involves several external manipulations and conditioning protocols, which drives down clinical applicability. Automated programming of the genesis by microscale physical forces and chronological biochemistry can increase clinical success. The design and fabrication of nested polysaccharide droplets (millimeter-sized) with cell sustaining properties of natural tissues and intrinsic properties for time and space evolution of cell transformation signals between somatic cells, pluripotent cells and differentiated therapeutic cells in a swift and efficient manner without the need for laborious external manipulation are reported. Cells transform between phenotypic states by having single and double nested droplets constituted with extracellular matrix proteins and reprogramming, and differentiation factors infused chronologically across the droplet space. The cell transformation into germ layer cells and bone cells is successfully tested in vitro and in vivo and promotes the formation of new bone tissues. Thus, nested droplets with BMP-2 loaded guests synthesize mineralized bone tissue plates along the length of a cranial non-union bone defect at 4 weeks. The advantages of sequenced somatic cell reprogramming and differentiation inside an individual hydrogel module without external manipulation, promoted by formulating tissue mimetic physical, mechanical, and chemical microenvironments are shown.

Nanotechnology in regenerative ophthalmology

In recent years, regenerative medicine is gaining momentum and is giving hopes for restoring function of diseased, damaged, and aged tissues and organs and nanotechnology is serving as a catalyst. In the ophthalmology field, various types of allogenic and autologous stem cells have been investigated to treat some ocular diseases due to age-related macular degeneration, glaucoma, retinitis pigmentosa, diabetic retinopathy, and corneal and lens traumas. Nanomaterials have been utilized directly as nanoscaffolds for these stem cells to promote their adhesion, proliferation and differentiation or indirectly as vectors for various genes, tissue growth factors, cytokines and immunosuppressants to facilitate cell reprogramming or ocular tissue regeneration. In this review, we reviewed various nanomaterials used for retina, cornea, and lens regenerations, and discussed the current status and future perspectives of nanotechnology in tracking cells in the eye and personalized regenerative ophthalmology. The purpose of this review is to provide comprehensive and timely insights on the emerging field of nanotechnology for ocular tissue engineering and regeneration.

iPS-Cell Technology and the Problem of Genetic Instability-Can It Ever Be Safe for Clinical Use?

The use of induced Pluripotent Stem Cells (iPSC) as a source of autologous tissues shows great promise in regenerative medicine. Nevertheless, several major challenges remain to be addressed before iPSC-derived cells can be used in therapy, and experience of their clinical use is extremely limited. In this review, the factors affecting the safe translation of iPSC to the clinic are considered, together with an account of efforts being made to overcome these issues. The review draws upon experiences with pluripotent stem-cell therapeutics, including clinical trials involving human embryonic stem cells and the widely transplanted mesenchymal stem cells. The discussion covers concerns relating to: (i) the reprogramming process; (ii) the detection and removal of incompletely differentiated and pluripotent cells from the resulting medicinal products; and (iii) genomic and epigenetic changes, and the evolutionary and selective processes occurring during culture expansion, associated with production of iPSC-therapeutics. In addition, (iv) methods for the practical culture-at-scale and standardization required for routine clinical use are considered. Finally, (v) the potential of iPSC in the treatment of human disease is evaluated in the light of what is known about the reprogramming process, the behavior of cells in culture, and the performance of iPSC in pre-clinical studies.

Recent advances in the design of injectable hydrogels for stem cell-based therapy

The recent advances in the design of injectable hydrogels for stem cell delivery, especially for in vivo applications, are overviewed in this review.

Recent advances in stem cell therapeutics and tissue engineering strategies

Background

Tissue regeneration includes delivering specific types of cells or cell products to injured tissues or organs for restoration of tissue and organ function. Stem cell therapy has drawn considerable attention since transplantation of stem cells can overcome the limitations of autologous transplantation of patient’s tissues; however, it is not perfect for treating diseases. To overcome the hurdles associated with stem cell therapy, tissue engineering techniques have been developed. Development of stem cell technology in combination with tissue engineering has opened new ways of producing engineered tissue substitutes. Several studies have shown that this combination of tissue engineering and stem cell technologies enhances cell viability, differentiation, and therapeutic efficacy of transplanted stem cells.

Main body

Stem cells that can be used for tissue regeneration include mesenchymal stem cells, embryonic stem cells, and induced pluripotent stem cells. Transplantation of stem cells alone into injured tissues exhibited low therapeutic efficacy due to poor viability and diminished regenerative activity of transplanted cells. In this review, we will discuss the progress of biomedical engineering, including scaffolds, biomaterials, and tissue engineering techniques to overcome the low therapeutic efficacy of stem cells and to treat human diseases.

Conclusion

The combination of stem cell and tissue engineering techniques overcomes the limitations of stem cells in therapy of human diseases, and presents a new path toward regeneration of injured tissues.

Morphology, Migration, and Transcriptome Analysis of Schwann Cell Culture on Butterfly Wings with Different Surface Architectures

It has been shown that material surface topography greatly affects cell attachment, growth, proliferation, and differentiation. However, the underlying molecular mechanisms for cell-material interactions are still not understood well. Here, two kinds of butterfly wings with different surface architectures were employed for addressing such an issue. Papilio ulysses telegonus (P.u.t.) butterfly wing surface is composed of micro/nanoconcaves, whereas Morpho menelaus (M.m.) butterfly wings are decorated with grooves. RSC96 cells grown on M.m. wings showed a regular sorting pattern along with the grooves. On the contrary, the cells seeded on P.u.t. wings exhibited random arrangement. Transcriptome sequencing and bioinformatics analysis revealed that huntingtin (Htt)-regulated lysosome activity is a potential key factor for determining cell growth behavior on M.m. butterfly wings. Gene silence further confirmed this notion. In vivo experiments showed that the silicone tubes fabricated with M.m. wings markedly facilitate rat sciatic nerve regeneration after injury. Lysosome activity and Htt expression were greatly increased in the M.m. wing-fabricated graft-bridged nerves. Collectively, our data provide a theoretical basis for employing butterfly wings to construct biomimetic nerve grafts and establish Htt lysosome as a crucial regulator for cell-material interactions.

Functional Hydrogels With Tunable Structures and Properties for Tissue Engineering Applications

Tissue engineering (TE) has been used as an attractive and efficient process to restore the original tissue structures and functions through the combination of biodegradable scaffolds, seeded cells, and biological factors. As a unique type of scaffolds, hydrogels have been frequently used for TE because of their similar 3D structures to the native extracellular matrix (ECM), as well as their tunable biochemical and biophysical properties to control cell functions such as cell adhesion, migration, proliferation, and differentiation. Various types of hydrogels have been prepared from naturally derived biomaterials, synthetic polymers, or their combination, showing their promise in TE. This review summarizes the very recent progress of hydrogels used for TE applications. The strategies for tuning biophysical and biochemical properties, and structures of hydrogels are first introduced. Their influences on cell functions and promotive effects on tissue regeneration are then highlighted.

Poly(butylene terephthalate) Fiber Assembly with Controllable Pore Size and Gradient Wettability: Potential in Simplifying Cell Culture Procedure

This study reports the scalable fabrication of a poly(butylene terephthalate) fiber assembly featured with controllable pore size and gradient wettability. Pore size is controlled via adjusting the throughput of melt blown process, while gradient wettability is achieved through single-sided plasma exposure and subsequent chitosan coating. When used in cell culture, the fiber assembly takes much less time in reaching a high cell collecting/releasing rate up to ≥99.5%, which is similar to that of the conventional centrifugal method. Other advantages of the fiber assembly, such as improved cell viability, reduced risk of contamination, and excellent reusability are also proved, leading us to believe its great potential in making the current cell culture procedure simpler and faster.