SERS-active metal-organic frameworks with embedded gold nanoparticles

Surface-Enhanced Raman Spectroscopy and Electrochemistry: The Ultimate Chemical Sensing and Manipulation Combination

One of the lessons we learned from the COVID-19 pandemic is that the need for ultrasensitive detection systems is now more critical than ever. While sensors' sensitivity, portability, selectivity, and low cost are crucial, new ways to couple synergistic methods enable the highest performance levels. This review article critically discusses the synergetic combinations of optical and electrochemical methods. We also discuss three key application fields-energy, biomedicine, and environment. Finally, we selected the most promising approaches and examples, the open challenges in sensing, and ways to overcome them. We expect this work to set a clear reference for developing and understanding strategies, pros and cons of different combinations of electrochemical and optical sensors integrated into a single device.

Advances in metal-organic frameworks for water remediation applications

Rapid industrialization and agricultural development have resulted in the accumulation of a variety of harmful contaminants in water resources. Thus, various approaches such as adsorption, photocatalytic degradation and methods for sensing water contaminants have been developed to solve the problem of water pollution. Metal-organic frameworks (MOFs) are a class of coordination networks comprising organic-inorganic hybrid porous materials having organic ligands attached to inorganic metal ions/clusters via coordination bonds. MOFs represent an emerging class of materials for application in water remediation owing to their versatile structural and chemical characteristics, such as well-ordered porous structures, large specific surface area, structural diversity, and tunable sites. The present review is focused on recent advances in various MOFs for application in water remediation via the adsorption and photocatalytic degradation of water contaminants. The sensing of water pollutants using MOFs via different approaches, such as luminescence, electrochemical, colorimetric, and surface-enhanced Raman spectroscopic techniques, is also discussed. The high porosity and chemical tunability of MOFs are the main driving forces for their widespread applications, which have huge potential for their commercial use.

Preparation of gold nanoparticles loaded MOF-199 for SERS detection of 5-hydroxyindole-3-acetic acid in serum

5-Hydroxyindole-3-acetic acid (5-HIAA) is regarded as a biomarker for diagnosis of carcinoid tumors, and it is of great significance to developing a precision assay for monitoring 5-HIAA levels. In this work, gold nanoparticles loading on the surface of MOF-199 (Au NPs/MOF-199) is prepared to propose a surface enhanced Raman scattering (SERS) assay for 5-HIAA. When 4-mercaptopyridine (4-MPy) is used as a SERS probe, on Au NPs/MOF-199, limit of detection (LOD) at 10-9 mol/L can be achieved. In addition, Au NPs/MOF-199 substrate with good preparation reproducibility shows long-term storage stability at 4 °C. Under optimal condition, the Au NPs/MOF-199-based SERS method is applied to determine 5-HIAA in serum. The concentration linear range is from 10-9 to 10-5 mol/L and LOD is of 6.40 × 10-11 mol/L. Much importantly, Au NPs/MOF-199 substrate exhibits specific response toward 5-HIAA against other metabolites in the serum due to the capturing selectivity from porous MOF-199. The recoveries obtained on spiked human serum samples locate in the span from 94.30% to 106.00% with RSD of 4.01-7.43%. Au NPs/MOF-199-based SERS sensing strategy is a promising avenue for on-field monitoring biomedical species for clinic diagnosis purpose.

Sensitive determination of thiram in apple samples using a ZIF-67 modified Si/Au@Ag composite as a SERS substrate

Substrate materials with high sensitivity and storage stability are crucial for the practical analytical application of surface-enhanced Raman scattering (SERS) techniques. In this work, a SERS-active substrate (Si/Au@Ag/ZIF-67) was fabricated with a metal-organic framework (ZIF-67) on a plasmonic surface (Si/Au@Ag) via self-assembly. The as-prepared material combined the properties of the abundant hotspots of the Au@Ag nanoparticles and the excellent adsorption performance of ZIF-67 for organic molecules. The synergy leads to high sensitivity of the composite substrate with a low detection limit for 4-aminothiophenol (a typical Raman reporter molecule) down to 2.0 × 10-9 M and the analytical enhancement factor (AEF) of the SERS substrate is 3.4 × 106. Moreover, the substrates exhibited good repeatability, high reproducibility, and reliable stability due to the MOF coating. The SERS signal was stable after 60 days of storage at room temperature. Ultimately, the optimal Si/Au@Ag/ZIF-67 was applied as a SERS sensor to analyze thiram, and the results showed a linear concentration range from 10-7 to 10-5 M with good linearity (R2 = 0.9934). The recoveries of thiram in spiked apple juice were in the range of 95.7-102.3%, with relative standard deviations less than 4.3%. These results predict that the proposed SERS substrates may hold great potential for the detection of environmental and food pollution in practical applications.

Controlled Encapsulation of Gold Nanoparticles into Zr-Metal-Organic Frameworks with Improved Detection Limitation of Volatile Organic Compounds via Surface-Enhanced Raman Scattering

Volatile organic compounds (VOCs) have harmful effects on human health and the environment but detecting low levels of VOCs is challenging due to a lack of reliable biomarkers. However, incorporating gold nanoparticles (Au NPs) into metal-organic frameworks (MOFs) shows promise for VOC detection. In this study, we developed nanoscale Au@UiO-66 that exhibited surface-enhanced Raman scattering (SERS) activity even at very low levels of toluene vapors (down to 1.0 ppm) due to the thickness of the shell and strong π-π interactions between benzenyl-type linkers and toluene. The UiO-66 shell also increased the thermal stability of the Au NPs, preventing aggregation up to 550 °C. This development may be useful for sensitive detection of VOCs for environmental protection purposes.

Recent Progress in the Application of Metal Organic Frameworks in Surface-Enhanced Raman Scattering Detection

Metal-organic framework (MOF) compounds are centered on metal ions or metal ion clusters, forming lattices with a highly ordered periodic porous network structure by connecting organic ligands. As MOFs have the advantages of high porosity, large specific surface area, controllable pore size, etc., they are widely used in gas storage, catalysis, adsorption, separation and other fields. SERS substrate based on MOFs can not only improve the sensitivity of SERS analysis but also solve the problem of easy aggregation of substrate nanoparticles. By combining MOFs with SERS, SERS performance is further improved, and tremendous research progress has been made in recent years. In this review, three methods of preparing MOF-based SERS substrates are introduced, and the latest applications of MOF-based SERS substrates in biosensors, the environment, gases and medical treatments are discussed. Finally, the current status and prospects of MOF-based SERS analysis are summarized.

Formation of Gold Nanoclusters from Goldcarbonyl Chloride inside the Metal-Organic Framework HKUST-1

Gas-phase infiltration of the carbonylchloridogold(I), Au(CO)Cl precursor into the pores of HKUST-1 ([Cu3(BTC)2(H2O)2], Cu-BTC) SURMOFs (surface-mounted metal-organic frameworks; BTC = benzene-1,3,5-tricarboxylate) leads to Au(CO)Cl decomposition within the MOF through hydrolysis with the aqua ligands on Cu. Small Aux clusters with an average atom number of x ≈ 5 are formed in the medium-sized pores of the HKUST-1 matrix. These gold nanoclusters are homogeneously distributed and crystallographically ordered, which was supported by simulations of the powder X-ray diffractometric characterization. Aux@HKUST-1 was further characterized by scanning electron microscopy (SEM) and infrared reflection absorption (IRRA) as well as Raman spectroscopy, time-of-flight secondary ion mass spectrometry (ToF-SIMS), X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma optical emission spectroscopy (ICP-OES).

Core-shell Au@MIL-100 (Fe) as an enhanced substrate for flunixin meglumine ultra-sensitive detection

This study aimed to develop and validate a simple and efficient surface-enhanced Raman spectroscopy (SERS) method to determine flunixin meglumine (FM) residues in animal tissues through using core-shell Au@MIL-100 (Fe) as enhanced substrate. Au@MIL-100 (Fe) composite material was synthesized by coating metal-organic framework materials (MOFs) on the surface of gold nanoparticles using the solvothermal method. Transmission electron microscopy (TEM), UV-vis spectrum, SERS spectrum, X-ray diffraction (XRD), Infrared spectrum (FT-IR), and EDX elemental mapping results revealed that the structural composition of the compound has good properties with localized surface plasmon resonance (LSPR) properties, high adsorption capacity, excellent SERS sensitivity and stability. When it was used as SERS substrate, the results of quantitative analysis of FM in pork showed a linear range of 0.10-50 mg·L^-1 with a correlation coefficient (R²) of 0.9819, the limit of detection (LOD) of 0.15 mg·g^-1, the recovery rate of 88.94%∼104.77%, the intra- and inter- batch relative standard deviation (RSD) of 3.57%∼14.22% and 0.18%∼3.44% respectively. Further verification results of the existing standard methods showed no significant difference between the SERS and UV methods (P < 0.05), as well as demonstrating that the SERS method has optimal precision, accuracy, and practicality. These results exposed that Au@MIL-100 (Fe) as a SERS substrate has great potential in rapid and on-site detection analysis.

Rapid Quantitative Detection of Voriconazole in Human Plasma Using Surface-Enhanced Raman Scattering

There is an increasing demand for rapid detection techniques for monitoring the therapeutic concentration of voriconazole (VRC) in human biological fluids. Herein, a rapid and selective surface-enhanced Raman scatting method for point-of-care determination of VRC in human plasma was developed via a portable Raman spectrometer. This approach has enabled the quantification of the VRC spiked into human plasma at clinical relevant concentrations. A gold nanoparticle solution (Au sol) was used as the SERS substrate, and the agglomerating conditions on its sensitivity were optimized. The method involves the formation of hot spots, and the signal of VRC molecules adsorbed on the surface of the SERS hot spot was amplified by 10⁵. The calibration curve was linear in the range of 0.02-10 ppm, with satisfactory repeatability. The limit of detection was as low as 12.3 ppb. The variation in VRC spectra over time on different substrates demonstrated good reproducibility. Notably, the salting-out extraction method developed in this study was rapid and suitable for the quantitation of drugs in biological samples. Compared with traditional methods, this approach allows for the point-of-care quantification of VRC directly in a complex matrix, which may open up new exciting opportunities for future use of the SERS technique in clinical applications.

Au nanoparticles decorated covalent organic framework composite for SERS analyses of malachite green and thiram residues in foods

A three-dimensional (3D) surface-enhanced Raman scattering (SERS) substrate composed of gold nanoparticles (AuNPs) self-assembled covalent organic frameworks (COFs) was fabricated via the electrostatic interaction between positively charged COFs and negatively charged AuNPs, which exhibited excellent SERS performance and were successfully applied for the analyses of malachite green (MG) residue in different seafood products as well as thiram residue in several kinds of fruit juice. The raspberry-like structure SERS substrate has a larger surface area that can provide more adsorption sites in testing and improve the efficiency of sample enrichment. By using this developed SERS substrate, the detection linearity ranges are 1.0 × 10^-9 mol·L^-1-1.0 × 10^-6 mol·L^-1 for MG and 5.0 × 10^-8 mol·L^-1-1.0 × 10^-5 mol·L^-1 for thiram (R² ≥ 0.995). The detection limits are 6.2 × 10^-10 mol·L^-1 for MG and 1.7 × 10^-8 mol·L^-1 for thiram, respectively. The COF-AuNPs substrate was actually applied for analysis of MG in seafood products and thiram in different fruit juice, with the recoveries in the ranges of 94.67-108.99 % for MG and 95.00-107.58 % for thiram, and both of the relative standard deviation (RSD) are no more than 5.88 %. This work indicates that the developed COF-AuNPs substrate is promising for SERS analyses and detections of residues in foods.

A super-hydrophobic perfluoropolyether coated polytetrafluoroethylene sheets substrate for detection of acetamiprid surface-enhanced Raman spectroscopy

In this paper, a hydrophobic substrate as concentrators including an inner layer of polytetrafluoroethylene (PTFE) and an outer layer covered a thin layer of perfluoropolyether (PFPE) was constructed to achieve a higher sensitivity for acetamiprid (AC) SERS detection. The condensation effect of the PTFE-PFPE hydrophobic substrate-induced aggregation of gold nanoparticles (Au NPs) result ''hot spots'' for SERS. The hydrophobic substrate is better reproducibility (RSD < 5%) compared with that on a conventional silicon wafer. A further application of the hydrophobic substrate was demonstrated by the detection of AC in tea samples within a detection range of 0.03 mg/L to 3 mg/L. The hydrophobic substrate eliminates the problem of solution diffusion to avoid the "coffee ring" effect (When a droplet adheres to a solid surface, the suspended molecular particles usually deposit on the edge of the droplet to form a ring).

Progress in Hybridization of Covalent Organic Frameworks and Metal-Organic Frameworks

Metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) hybrid materials are a class of porous crystalline materials that integrate MOFs and COFs with hierarchical pore structures. As an emerging porous frame material platform, MOF/COF hybrid materials have attracted tremendous attention, and the field is advancing rapidly and extending into more diverse fields. Extensive studies have shown that a broad variety of MOF/COF hybrid materials with different structures and specific properties can be synthesized from diverse building blocks via different chemical reactions, driving the rapid growth of the field. The allowed complementary utilization of π-conjugated skeletons and nanopores for functional exploration has endowed these hybrid materials with great potential in challenging energy and environmental issues. It is necessary to prepare a "family tree" to accurately trace the developments in the study of MOF/COF hybrid materials. This review comprehensively summarizes the latest achievements and advancements in the design and synthesis of MOF/COF hybrid materials, including COFs covalently bonded to the surface functional groups of MOFs (MOF@COF), MOFs grown on the surface of COFs (COF@MOF), bridge reaction between COF and MOF (MOF+COF), and their various applications in catalysis, energy storage, pollutant adsorption, gas separation, chemical sensing, and biomedicine. It concludes with remarks concerning the trend from the structural design to functional exploration and potential applications of MOF/COF hybrid materials.

Metal-Organic Frameworks-Based Sensors for Food Safety

Food contains a variety of poisonous and harmful substances that have an impact on human health. Therefore, food safety is a worldwide public concern. Food detection approaches must ensure the safety of food at every step of the food supply chain by monitoring and evaluating all hazards from every single step of food production. Therefore, early detection and determination of trace-level contaminants in food are one of the most crucial measures for ensuring food safety and safeguarding consumers’ health. In recent years, various methods have been introduced for food safety analysis, including classical methods and biomolecules-based sensing methods. However, most of these methods are laboratory-dependent, time-consuming, costly, and require well-trained technicians. To overcome such problems, developing rapid, simple, accurate, low-cost, and portable food sensing techniques is essential. Metal-organic frameworks (MOFs), a type of porous materials that present high porosity, abundant functional groups, and tunable physical and chemical properties, demonstrates promise in large-number applications. In this regard, MOF-based sensing techniques provide a novel approach in rapid and efficient sensing of pathogenic bacteria, heavy metals, food illegal additives, toxins, persistent organic pollutants (POPs), veterinary drugs, and pesticide residues. This review focused on the rapid screening of MOF-based sensors for food safety analysis. Challenges and future perspectives of MOF-based sensors were discussed. MOF-based sensing techniques would be useful tools for food safety evaluation owing to their portability, affordability, reliability, sensibility, and stability. The present review focused on research published up to 7 years ago. We believe that this work will help readers understand the effects of food hazard exposure, the effects on humans, and the use of MOFs in the detection and sensing of food hazards.

Surface Enhanced Raman Spectroscopy: Applications in Agriculture and Food Safety

Recent global warming has resulted in shifting of weather patterns and led to intensification of natural disasters and upsurges in pests and diseases. As a result, global food systems are under pressure and need adjustments to meet the change—often by pesticides. Unfortunately, such agrochemicals are harmful for humans and the environment, and consequently need to be monitored. Traditional detection methods currently used are time consuming in terms of sample preparation, are high cost, and devices are typically not portable. Recently, Surface Enhanced Raman Scattering (SERS) has emerged as an attractive candidate for rapid, high sensitivity and high selectivity detection of contaminants relevant to the food industry and environmental monitoring. In this review, the principles of SERS as well as recent SERS substrate fabrication methods are first discussed. Following this, their development and applications for agrifood safety is reviewed, with focus on detection of dye molecules, melamine in food products, and the detection of different classes of pesticides such as organophosphate and neonicotinoids.

Facile Detection and Quantification of Acetamiprid Using a Portable Raman Spectrometer Combined with Self-Assembled Gold Nanoparticle Array

Rapid and facile determination of pesticides is critically important in food and environmental monitoring. This study developed a self-assembled gold nanoparticle array based SERS method for highly specific and sensitive detection of acetamiprid, a neonicotinoid pesticide that used to be difficult in SERS analysis due to its low affinity with SERS substrates. SERS detection and quantification of acetamiprid was conducted with self-assembled gold nanoparticle arrays at the interface of chloroform and water as the enhancing substrate. Since targets dissolved in chloroform (organic phase) also have access to the hot-spots of Au NP array, the developed method exhibited good sensitivity and specificity for acetamiprid determination. Under the optimal conditions, SERS intensities at Raman shifts of 631 cm−1 and 1109 cm−1 displayed a good linear relationship with the logarithm concentration of acetamiprid in the range of 5.0 × 10−7 to 1.0 × 10−4 mol/L (0.11335 ppm to 22.67 ppm), with correlation coefficients of 0.97972 and 0.97552, respectively. The calculated LOD and LOQ of this method were 1.19 × 10−7 mol/L (0.265 ppb) and 2.63 × 10−7 mol/L (0.586 ppb), respectively, using SERS signal at 631 cm−1, and 2.95 × 10−7 mol/L (0.657 ppb) and 3.86 × 10−7 mol/L (0.860 ppb) using SERS signal at 1109 cm−1, respectively. Furthermore, the developed SERS method was successfully applied in determining acetamiprid on the surface of apple and spinach. This method offers an exciting opportunity for rapid detection of acetamiprid and other organic pesticides considering its advantages of simple preparation process, good specificity and sensitivity, and short detection time (within 1 h).

SERS-ELISA determination of human carboxylesterase 1 using metal-organic framework doped with gold nanoparticles as SERS substrate

By in situ synthesis of gold nanoparticles (AuNPs) within the acid-etched (AE) MIL-101 (Cr) framework, AE-MIL-101 (Cr) nanocomposites embedded with AuNPs (AuNP/AE-MIL-101 (Cr)) were prepared as surface-enhanced Raman scattering (SERS) substrate. AuNPs are uniformly distributed and stabilized inside the metal-organic framework (MOF), thus forming more SERS hotspots. The SERS performance of AuNP/AE-MIL-101 (Cr) was evaluated using 4-mercaptophenylboronic acid (4-MPBA), 4-mercaptobenzoic acid (4-MBA), benzidine, and rhodamine 6G (R6G). The SERS substrate displays satisfying stability with very low background signal. When benzidine is used as the Raman reporter, the limit of detection (LOD) can reach 6.7 × 10^-13 mol·L^-1, and the relative standard deviation (RSD) of the intra- and inter-batch repetitive tests is less than 5.2%. On this basis, we developed a method for the detection of human carboxylesterase 1 (hCE 1) in human serum using AuNP/AE-MIL-101 (Cr) nanocomposite as SERS substrate and enzyme-linked immunosorbent assay (ELISA) colorimetric substrate as SERS marker. This method was used to determine hCE 1 in clinical serum samples without complicated sample pretreatment, and the detection results were consistent with the data determined by ELISA. In the concentration range 0.1-120 ng·mL^-1, the SERS signal intensity of benzidine at 1609 cm^-1 gradually decreases with the increase of hCE 1 concentration (R² = 0.9948). The average recoveries of hCE 1 in human serum are in the range 84 to 108%, with RSDs lower than 7.7%. By using AuNP/acid etching-MIL-101(Cr) metal organic framework (MOF) as SERS substrate and enzyme-linked immunosorbent assay (ELISA) colorimetric substrate as the SERS marker, a rapid and sensitive method for the determination of human carboxylesterase 1 (hCE1) in human serum samples has been developed.

In situ and rapid determination of acetamiprid residue on cabbage leaf using surface-enhanced Raman scattering

BACKGROUND

Pesticide residues in agricultural products and foods pose a serious threat to human health, and therefore a simple, rapid and direct method is urgently needed for pesticide residue detection. In addition to realizing the detection of acetamiprid in cabbage extract solution, the main target of this study was to establish an in situ surface-enhanced Raman scattering (SERS) method, which could directly detect acetamiprid residue on cabbage leaf without the need for extraction. Acetamiprid was first used to contaminate the surface of fresh cabbage leaf, and then bimetallic silver-coated gold nanoparticles (Au@AgNPs) were added on the contaminated spots and dried for SERS measurement.

RESULTS

Results suggested that acetamiprid can be detected in cabbage extract and on cabbage leaf surface in situ using the SERS method based on the Au@AgNPs substrate. The limit of detection was 0.08 μg mL^-1 in cabbage extract and 0.14 mg kg^-1 on cabbage leaf, the recovery ranged from 80.5% to 105.5% and the relative standard deviation was in the range 4.37-10.63%.

CONCLUSIONS

The proposed SERS method provides an in situ, nondestructive and rapid way to detect acetamiprid residue on the surface of fruits and vegetables, which could serve as an auxiliary approach for early screening of contaminated produce in field or on site in the future. © 2020 Society of Chemical Industry.

AgNPs and MIL-101(Fe) self-assembled nanometer materials improved the SERS detection sensitivity and reproducibility

Recently, in the research of Surface-enhanced Raman scattering (SERS) technology, it is found that the preparation of enhanced substrate is particularly important. In this work, the most commonly used methods were used to synthesize AgNPs and MIL-101(Fe), and AgNPs/MIL-101(Fe) nanocomposite was obtained through self-assembly of the two substances. Four different probe molecules were detected with the self-assembled substrate and compared with the results of same probe molecules with AgNPs and MIL-101(Fe) as SERS substrate separately, it was found that AgNPs/ MIL-101 (Fe) nanocomposites had a strong enhancing effect as SERS substrate. The Enhancement Factor (EF) value of 10^-6 mol/L Rhodamine 6G (R6G) was calculated as 2.09 × 10⁹, and the Raman intensities of the peak relative standard deviation (RSD) of R6G Raman attribution was calculated as 7.55%. The time stability of the material was studied and it was found that the reduced Raman signal and poor reproducibility were due to the AgNPs placement time. AgNPs/ MIL-101 (Fe) nanocomposites were used as SERS substrate to detect Paraquat with a minimum concentration of 10^-12 mol/L. The signal values of Paraquat Raman detected at 10^-6 mol/L in different pH environments were relatively stable.

Recent Advances in Metal Organic Frameworks Based Surface Enhanced Raman Scattering Substrates: Synthesis and Applications

Metal-organic frameworks (MOFs) are supramolecular nanomaterials, in which metal ions or clusters are connected by organic ligands to form crystalline lattices with highly ordered periodic porous network structure. MOFs have been widely applied in various fields, such as catalyst, sample preparation, and sensing. In recent years, MOFs based surface enhanced Raman scattering (SERS) substrates have attracted much attention since MOFs can largely improve the performance of metallic SERS substrates toward target enrichment and signal enhancement. MOFs have been exploited in SERS analysis to tackle some challenges that bare metal substrates cannot achieve. Combination of MOFs and SERS improved the sensitivity of traditional SERS analysis and extended the application scope of SERS. With the increasing exploration of MOFs based SERS substrates, there is a great demand to review the advances in these researches. Herein, this review concentrated on summarizing the preparation and applications of MOFs based SERS substrates. Representative researches were discussed to better understand the property of MOFs based SERS substrates. The advantages of MOFs based SERS substrates were highlighted, as well as their limitations. In addition, the challenges, opportunities, and future trends in MOFs based SERS analysis were tentatively discussed.

Applications of advanced materials in bio-sensing in live cells: Methods and applications

A wide variety of species, such as different ions, reactive oxygen species, and biomolecules play critical roles in many cell functions. These species are responsible for a range of cellular functions such as signaling, and disturbed levels could be involved in many diseases, such as diabetes, cancer, neurodegeneration etc. Thus, sensitive and specific detection methods for these biomarkers could be helpful for early disease detection and mechanistic investigations. New ultrasensitive sensors for detection of markers within living cells are a growing field of research. The present review provides updates in live cell-based biosensing, which have been published within the last decade. These sensors are mainly based on carbon, gold and other metals, and their physicochemical advantages and limitations are discussed. Advanced materials can be incorporated into probes for the detection of various analytes in living cells. The sensitivity is strongly influenced by the intrinsic properties of the nanomaterials as well their shape and size. The mechanisms of action and future challenges in the developments of new methods for live cell based biosensing are discussed.

Understanding the Role of Metal-Organic Frameworks in Surface-Enhanced Raman Scattering Application

Metal-organic frameworks (MOFs), built from organic linkers and metal ions/clusters, have emerged as highly promising materials for wide applications. Combining highly porous crystalline MOFs with the surface-enhanced Raman scattering (SERS) technique can achieve unprecedented advantages of high selectivity, high sensitivity, and expedience in analysis and detection. In this critical review, the aim is to present a comprehensive review of recent advances in understanding of the roles of MOFs in MOF-SERS systems, particularly their structure-to-property correlation. Key examples are selected from representative literature to illustrate critical concepts and the MOF-based property-dependent applications are particularly emphasized. Finally, the barriers, future trends, and prospects for further advances in MOF-SERS platforms are also discussed.

ZIF-8-modified Au-Ag/Si nanoporous pillar array for active capture and ultrasensitive SERS-based detection of pentachlorophenol

A novel SERS substrate based on a zeolitic imidazolate framework-8 (ZIF-8) film-modified Au-Ag/Si nanoporous pillar array (ZIF-8/Au-Ag/Si-NPA) was successfully fabricated for pentachlorophenol (PCP) detection. The Au-Ag/Si-NPA was synthesized through immersion plating and replacement reaction on the Si-NPA, which was prepared by the hydrothermal etching. The ZIF-8 film was coated via layer-by-layer growth technique. The ZIF-8 film is nanoporous and its thickness can be controlled by varying the growing number, which can significantly influence the SERS performance of the substrate. The substrate with optimal ZIF-8 thickness exhibited an excellent SERS response to PCP molecules. The SERS enhancement factor reached up to 1.8 × 10⁷ and the detection limit was down to 10^-13 M. Moreover, the substrate showed good uniformity with a relative standard deviation (RSD) of 8.7% and good selectivity. The PCP detection is hardly interfered by the coexisting organic compounds. The high SERS performance may be due to the enrichment effect of the ZIF-8 film. The ZIF-8 film could capture and enrich the trace PCP molecules by electrostatic interaction between the negatively charged PCP^- and the positively charged ZIF-8. This work suggests that the ZIF-8/Au-Ag/Si-NPA substrate has potential application in SERS analysis of the polar organic pollutant detection in environmental media.

Recent Progress in Surface-Enhanced Raman Scattering for the Detection of Chemical Contaminants in Water

Water is a matter of vital importance for all developed countries due to the strong impact on human health and aquatic, wetlands and terrestrial environments. Therefore, the monitoring of water quality is of tremendous importance. The enormous advantages that Surface-enhanced Raman scattering (SERS) spectroscopy offers, such as fingerprint recognition, multiplex capabilities, high sensitivity, and selectivity or non-destructive testing, make this analytical tool very attractive for this purpose. This minireview aims to provide a summary of current approaches for the implementation of SERS sensors in monitoring organic and inorganic pollutants in water. In addition, we briefly highlight current challenges and provide an outlook for the application of SERS in environmental monitoring.

Substrate for Surface-Enhanced Raman Spectroscopy Formed by Gold Nanoparticles Buried in Poly(methyl methacrylate)

In this work, we present some properties and use of a nanocomposite formed by gold nanoparticles (NPs) into poly(methyl methacrylate) (PMMA) and its application as substrates for surface-enhanced Raman spectroscopy (SERS). The nanocomposite was formed using low-energy (49 eV) ion implantation of gold in PMMA using a cathodic arc plasma gun. The gold NPs are formed spontaneously from the implanted ions and they remain isolated from each other by the polymer medium surrounding them, ensuring a spacing between the NPs of less than 10 nm (hot spot places). The NPs form below the surface, protected from the environment, guaranteeing the stability of the composite layer. Moreover, here, we present an interesting approach to concentrate analyte molecules closer to the metal surface using the swelling effect in PMMA. Using absorption of the analyte, the molecules stay in the gaps between NPs, which is a good solution for one of the biggest challenges in SERS, that is, to guide molecules to the hot spot places.

Present and Future of Surface-Enhanced Raman Scattering

The discovery of the enhancement of Raman scattering by molecules adsorbed on nanostructured metal surfaces is a landmark in the history of spectroscopic and analytical techniques. Significant experimental and theoretical effort has been directed toward understanding the surface-enhanced Raman scattering (SERS) effect and demonstrating its potential in various types of ultrasensitive sensing applications in a wide variety of fields. In the 45 years since its discovery, SERS has blossomed into a rich area of research and technology, but additional efforts are still needed before it can be routinely used analytically and in commercial products. In this Review, prominent authors from around the world joined together to summarize the state of the art in understanding and using SERS and to predict what can be expected in the near future in terms of research, applications, and technological development. This Review is dedicated to SERS pioneer and our coauthor, the late Prof. Richard Van Duyne, whom we lost during the preparation of this article.

Spectroscopy, microscopy, diffraction and scattering of archetypal MOFs: formation, metal sites in catalysis and thin films

A comprehensive overview of characterization tools for the analysis of well-known metal–organic frameworks and physico-chemical phenomena associated to their applications.

Metal-Organic Frameworks for Food Safety

Food safety is a prevalent concern around the world. As such, detection, removal, and control of risks and hazardous substances present from harvest to consumption will always be necessary. Metal-organic frameworks (MOFs), a class of functional materials, possess unique physical and chemical properties, demonstrating promise in food safety applications. In this review, the synthesis and porosity of MOFs are first introduced by some representative examples that pertain to the field of food safety. Following that, the application of MOFs and MOF-based materials in food safety monitoring, food processing, covering preservation, sanitation, and packaging is overviewed. Future perspectives, as well as potential opportunities and challenges faced by MOFs in this field will also be discussed. This review aims to promote the development and progress of MOF chemistry and application research in the field of food safety, potentially leading to novel solutions.

Applications of magnetic nanoparticles in surface-enhanced Raman scattering (SERS) detection of environmental pollutants

Environmental pollution, a major problem worldwide, poses considerable threat to human health and ecological environment. Efficient and reliable detection technologies, which focus on the appearance of emerging environmental and trace pollutants, are urgently needed. Surface-enhanced Raman scattering (SERS) has become an attractive analytical tool for sensing trace targets in environmental field because of its inherent molecular fingerprint specificity and high sensitivity. In this review, we focused on the recent developments in the integration of magnetic nanoparticles (MNPs) with SERS for facilitating sensitive detection of environmental pollutants. An overview and classification of different types of MNPs for SERS detection were initially provided, enabling us to categorize the huge amount of literature that was available in the interdisciplinary research field of MNPs based SERS technology. Then, the basic working principles and applications of MNPs in SERS detection were presented. Subsequently, the detection technologies integrating MNPs with SERS that eventually were used for the detection of various environmental pollutions were reviewed. Finally, the advantages of MNP-basedSERS detection technology for environmental pollutants were concluded, and the current challenges and future outlook of this technology in practical applications were highlighted. The application of the MNPs-basedSERS techniques for environmental analysis will be significantly advanced with the great progresses of the nanotechnologies, optics, and materials.

Metal-organic framework (MOF-5) coated SERS active gold gratings: A platform for the selective detection of organic contaminants in soil

In this work, we proposed the functionalization of a surface plasmon-polariton (SPP)-supported gold grating surface with the metal-organic framework (MOF-5) for sensitive, selective and reproducible surface-enhanced Raman scattering (SERS) detection of organophosphorus pesticides. Homogeneous distribution of plasmon intensity along the Au grating surface ensures the high reproducibility of SERS results (deviation of Raman peak intensity does not exceed the 4% along the sample). The surface-assisted growth of thin MOF-5 film was accomplished in two steps procedure: (i) covalent grafting by 4-carboxyphenyl groups and (ii) the immersion of samples in the mother liquid of MOF-5. Proposed SERS chip proved itself to be a perfect analytical probe for the detection of organophosphorus pesticides with high reliability and low detection limit up to 10^-12 M. Moreover, selective detection and recognition of several relevant organic contaminants (azo-dye, mycotoxin, and pesticide) from the simulated soil was successfully demonstrated. All SERS measurements were performed using portable Raman spectrometer and can easily be expanded to environmental conditions. Our work combines the high affinity of organic contaminants to the MOF-5 with excellent plasmonic excitation on the surface plasmon-polariton supported structure and shows the way to the realization of closed-to-ideal analytical SERS chip.

Uniform arrangement of gold nanoparticles on magnetic core particles with a metal-organic framework shell as a substrate for sensitive and reproducible SERS based assays: Application to the quantitation of Malachite Green and thiram

Magnetite (Fe₃O₄) spheres acting as a core were evenly decorated with gold nanoparticles (AuNPs) and coated with a shell of a metal organic framework (MOF) of type MIL-100(Fe). The resulting hybrid nanomaterial of type Fe₃O₄-Au@MIL-100(Fe) hybrid is shown to be a viable new SERS substrate. The integration of magnetic core, build-in plasmonic gold nanoparticles and a MOF shell endows the Fe₃O₄-Au@MIL-100(Fe) with highly efficient magnetic separation and enrichment ability, abundant interparticle hotspots, and significant chemical enhancement effect. This leads to a large enhancement, and greatly improved reproducibility of the SERS signals as shown for Malachite Green (MG) and the fungicide thiram. MG in solution can be quantified with a 50-fold lower detection limit (0.14 nM for peak at 1398 cm^-1) and largely improved reproducibility (RSD = 9%, 1398 cm^-1) when compared to the use of (a) AuNPs anchored on MIL-100(Fe) (RSD = 27%, 1186 cm^-1), or (b) AuNPs embedded in MIL-100(Fe) (RSD = 36%, 1398 cm^-1). The method was applied to the quantitation of MG and thiram in spiked water samples. The lower limits of detection are 4.4 nM for MG (1398 cm^-1) and 15 nM for thiram (1380 cm^-1), respectively, and signals' RSDs are 13% (1398 cm^-1) and 5% (1380 cm^-1) for MG and thiram, respectively. The substrate is recyclable. Graphical abstract Schematic illustration of the preparation and SERS molecule sensing application of Fe₃O₄-Au@MIL-100(Fe) hybrid. PMMA: poly(methacrylic acid; BPEI: branched poly(ethyleneimine); BTC: 1,3,5-tricarboxybenzene.

A Simple SERS-Based Trace Sensing Platform Enabled by AuNPs-Analyte/AuNPs Double-Decker Structure on Wax-Coated Hydrophobic Surface

In this work, a simple and versatile SERS sensing platform enabled by AuNPs-analyte/AuNPs double-decker structure on wax-coated hydrophobic surface was developed using a portable Raman spectrometer. Wax-coated silicon wafer served as a hydrophobic surface to induce both aggregation and concentration of aqueous phase AuNPs mixed with analyte of interest. After drying, another layer of AuNPs was drop-cast onto the layer of AuNPs-analyte on the substrate to form double-decker structure, thus introducing more “hot spots” to further enhance the Raman signal. To validate the sensing platform, methyl parathion (pesticide), and melamine (a nitrogen-enrich compound illegally added to food products to increase their apparent protein content) were employed as two model compounds for trace sensing demonstration. The as-fabricated sensor showed high reproducibility and sensitivity toward both methyl parathion and melamine detection with the limit of detection at the nanomolar and sub-nanomolar concentration level, respectively. In addition, remarkable recoveries for methyl parathion spiked into lake water samples were obtained, while reasonably good recoveries for melamine spiked into milk samples were achieved. These results demonstrate that the as-developed SERS sensing platform holds great promise in detecting trace amount of hazardous chemicals for food safety and environment protection.

Core-Shell Au@Metal-Organic Frameworks for Promoting Raman Detection Sensitivity of Methenamine

Abuse of methenamine in foodstuff is harmful to the health of people. Routine methods recommended by the national standard are indirect assays with complicated pretreatment of samples or less sensitivity. In this work, core-shell Au nanoparticles@inositol hexaphosphate@MIL-101(Fe) nanoparticles, designated as Au@MIL-101, are successfully synthesized by layer-by-layer assembly. Metal-organic framework (MOF; MIL-101)-modified AuNPs could narrow the distance between neighboring Au@MIL-101, which increases the amount of "hot spots" and contributes excellent enhancement of Raman scattering. In addition, certain target molecules could access the proximity to the "hot spots" by the strong interaction capability of MOF with -COOH groups. Taking the syngeneic effect of "hot spots" and chemical enhancement via specific binding, Au@MIL-101-based Raman protocol with huge sensitivity is developed to achieve direct detection of methenamine. It has good linearity of dynamic concentration from 3.16 × 10^-6 to 1.0 × 10^-8 M with correlation coefficient ( R²) of 0.9908. The limit of detection reaches 5.0 × 10^-10 M. As a practical application, such an Au@MIL-101-based Raman protocol could be used for the direct determination of trace methenamine in vermicelli, which meets the requirements of the national standard.

Potential Utility of Metal-Organic Framework-Based Platform for Sensing Pesticides

The progress in modern agricultural practices could not have been realized without the large-scale contribution of assorted pesticides (e.g., organophosphates and nonorganophosphates). Precise tracking of these chemicals has become very important for safeguarding the environment and food resources owing to their very high toxicity. Hence, the development of sensitive and convenient sensors for the on-site detection of pesticides is imperative to overcome practical limitations encountered in conventional methodologies, which require skilled manpower at the expense of high cost and low portability. In this regard, the role of novel, advanced functional materials such as metal-organic frameworks (MOFs) has drawn great interest as an alternative for conventional sensory systems because of their numerous advantages over other nanomaterials. This review was organized to address the recent advances in applications of MOFs for sensing various pesticides because of their tailorable optical and electrical characteristics. It also provides in-depth comparison of the performance of MOFs with other nanomaterial sensing platforms. Further, we discuss the present challenges (e.g., potential bias due to instability under certain conditions, variations in the diffusion rate of the pesticide, chemical interferences, and the precise measurement of luminesce quenching) in developing robust and sensitive sensors by using tailored porosity, functionalities, and better framework stability.