Design of biomimetic substrates for long-term maintenance of alveolar epithelial cells

Assessment of cellular senescence potential of PM2.5 using 3D human lung fibroblast spheroids in vitro model

Background

Epidemiological studies demonstrate that particulate matter 2.5 (PM2.5) exposure closely related to chronic respiratory diseases. Cellular senescence plays an important role in many diseases. However, it is not fully clear whether PM2.5 exposure could induce cellular senescence in the human lung. In this study, we generated a three-dimensional (3D) spheroid model using isolated primary human lung fibroblasts (HLFs) to investigate the effects of PM2.5 on cellular senescence at the 3D level.

Methods

3D spheroids were exposed to 25-100 μg/ml of PM2.5 in order to evaluate the impact on cellular senescence. SA-β-galactosidase activity, cell proliferation, and the expression of key genes and proteins were detected.

Results

Exposure of the HLF spheroids to PM2.5 yielded a more sensitive cytotoxicity than 2D HLF cell culture. Importantly, PM2.5 exposure induced the rapid progression of cellular senescence in 3D HLF spheroids, with a dramatically increased SA-β-Gal activity. In exploiting the mechanism underlying the effect of PM2.5 on senescence, we found a significant increase of DNA damage, upregulation of p21 protein levels, and suppression of cell proliferation in PM2.5-treated HLF spheroids. Moreover, PM2.5 exposure created a significant inflammatory response, which may be at least partially associated with the activation of TGF-β1/Smad3 axis and HMGB1 pathway.

Conclusions

Our results indicate that PM2.5 could induce DNA damage, inflammation, and cellular senescence in 3D HLF spheroids, which may provide a new evidence for PM2.5 toxicity based on a 3D model which has been shown to be more in vivo-like in their phenotype and physiology than 2D cultures.

Mesenchymal cells support the early retention of primary alveolar type 2 cells on acellular mouse lung scaffolds

Objectives

Tissue engineering approaches via repopulation of acellular biological grafts provide an exciting opportunity to generate lung grafts for transplantation. Alveolar type 2 (AT2) cells are a promising cell source for re-epithelialization. There are however inherent limitations with respect to their survival and growth, thus impeding their usability for tissue engineering applications. This study investigates the use of mesenchymal stromal cells to support primary AT2 cells for recellularization of mouse lung scaffolds.

Methods

AT2 cells and bone marrow-derived mesenchymal cells (BMC) were co-delivered to decellularized mouse lung scaffolds. Recellularized lungs were evaluated for cell surface coverage, viability, and differentiation at 1 and 4 days after cell seeding. Recellularization was evaluated via histological analysis and immunofluorescence.

Results

Simultaneous delivery of AT2 and BMC into acellular lung scaffolds resulted in enhanced cell surface coverage and reduced AT2 cell apoptosis in the recellularized scaffolds at Day 1 but not Day 4. AT2 cell number decreased after 4 days in both of AT2 only and codelivery groups suggesting limited expansion potential in the scaffold. After retention in the scaffold, AT2 cells differentiated into Aqp5-expressing cells.

Conclusions

Our results indicate that BMC support AT2 cell survival during the initial attachment and engraftment phase of recellularization. While our findings suggest only a short-term beneficial effect of BMC, our study demonstrates that AT2 cells can be delivered and retained in acellular lung scaffolds; thus with preconditioning and supporting cells, may be used for re-epithelialization. Selection and characterization of appropriate cell sources for use in recellularization, will be critical for ultimate clinical application.

Constructing epidermal rete ridges using a composite hydrogel to enhance multiple signaling pathways for the maintenance of epidermal stem cell niche

The undulating microstructure rete ridge (RR) located at the junction between the dermis and epidermis plays a crucial role in improving skin mechanical properties and maintaining skin homeostasis. However, the investigation of RR microstructures is usually neglected in current tissue engineering for skin regeneration. Here, to create an epidermal model with RR microstructures, keratinocytes were cultured on a patterned GelMA-PEGDA hydrogel constructed using molding technology. Furthermore, grafting acryloylated Arg-Gly-Asp (RGD) peptides on the hydrogel surface significantly improved cell adhesion, fusion, and development. RT-PCR, Western blot, and immunofluorescence staining confirmed that cells on RR microstructures exhibited higher gene and protein expression associated with epidermal stem cells. RNA sequencing analysis of cells on RR microstructure showed higher gene expression profiles related to stem cell maintenance, basement membrane formation, and epidermal development. Furthermore, RT-PCR analysis of epidermal models of various dimensions demonstrated that smaller microstructures were more conducive to epidermal stem cell marker gene expression, which is analogous to human skin. Overall, we have successfully developed a method for integrating RR microstructures into an epidermal model that mimics natural skin to maintain epidermal stem cell niche, providing a valuable reference for researching skin regeneration within the fields of tissue engineering and regenerative medicine. STATEMENT OF SIGNIFICANCE: This study presents a method for precisely fabricating microstructures of skin rete ridges using composite hydrogels, thereby creating a skin model that mimics natural human skin. The findings reveal that this microstructure provides a stem cell niche that regulates the pathways and promotes the expression of proteins related to epidermal stem cells. This work advances the functional properties of tissue engineered skin and holds promise for improving the therapeutic efficacy of artificial skin grafts for the skin wounds.

Adhesive-Based Fabrication Technique for Culture of Lung Airway Epithelial Cells with Applications in Cell Patterning and Microfluidics

This work describes a versatile and cost-effective cell culture method for micropatterning and growing adherent cells on porous membranes using pressure-sensitive double-sided adhesives. This technique also allows cell culture using conventional methods and their easy integration into microfluidic chip devices. Adhesives can be used to form different patterns of cultured cells, which can be used for cell proliferation and wound-healing models. To demonstrate the viability of our system, we evaluate the toxicity effect of five different adhesives on two distinct airway epithelial cell lines and show functional applications for cell patterning and microfluidic cell culture chip fabrication. We developed a sandwiched microfluidic device that enabled us to culture cells in a submerged condition and transformed it into a dynamic platform when required. The viability of cells and their inflammatory responses to IL-1β stimulation were investigated. Our technique is applicable for conventional culturing of cells, widely available in biomedical research labs, while enabling the introduction of perfusion for an advanced dynamic cell culture model when needed.

A Robust Protocol for Decellularized Human Lung Bioink Generation Amenable to 2D and 3D Lung Cell Culture

Decellularization efforts must balance the preservation of the extracellular matrix (ECM) components while eliminating the nucleic acid and cellular components. Following effective removal of nucleic acid and cell components, decellularized ECM (dECM) can be solubilized in an acidic environment with the assistance of various enzymes to develop biological scaffolds in different forms, such as sheets, tubular constructs, or three-dimensional (3D) hydrogels. Each organ or tissue that undergoes decellularization requires a distinct and optimized protocol to ensure that nucleic acids are removed, and the ECM components are preserved. The objective of this study was to optimize the decellularization process for dECM isolation from human lung tissues for downstream 2D and 3D cell culture systems. Following protocol optimization and dECM isolation, we performed experiments with a wide range of dECM concentrations to form human lung dECM hydrogels that were physically stable and biologically responsive. The dECM based-hydrogels supported the growth and proliferation of primary human lung fibroblast cells in 3D cultures. The dECM is also amenable to the coating of polyester membranes in Transwell™ Inserts to improve the cell adhesion, proliferation, and barrier function of primary human bronchial epithelial cells in 2D. In conclusion, we present a robust protocol for human lung decellularization, generation of dECM substrate material, and creation of hydrogels that support primary lung cell viability in 2D and 3D culture systems

3D printed hydrogels with oxidized cellulose nanofibers and silk fibroin for the proliferation of lung epithelial stem cells

A novel biomaterial ink consisting of regenerated silk fibroin (SF) and 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized bacterial cellulose (OBC) nanofibrils was developed for 3D printing lung tissue scaffold. Silk fibroin backbones were cross-linked using horseradish peroxide/H₂O₂ to form printed hydrogel scaffolds. OBC with a concentration of 7wt% increased the viscosity of inks during the printing process and further improved the shape fidelity of the scaffolds. Rheological measurements and image analyses were performed to evaluate inks printability and print shape fidelity. Three-dimensional construct with ten layers could be printed with ink of 1SF-2OBC (SF/OBC = 1/2, w/w). The composite hydrogel of 1SF-1OBC (SF/OBC = 1/1, w/w) printed at 25 °C exhibited a significantly improved compressive strength of 267 ± 13 kPa and a compressive stiffness of 325 ± 14 kPa at 30% strain, respectively. The optimized printing parameters for 1SF-1OBC were 0.3 bar of printing pressure, 45 mm/s of printing speed and 410 μm of nozzle diameter. Furthermore, OBC nanofibrils could be induced to align along the print lines over 60% degree of orientation, which were analyzed by SEM and X-ray diffraction. The orientation of OBC nanofibrils along print lines provided physical cues for guiding the orientation of lung epithelial stem cells, which maintained the ability to proliferate and kept epithelial phenotype after 7 days' culture. The 3D printed SF-OBC scaffolds are promising for applications in lung tissue engineering.

3D alveolar in vitro model based on epithelialized biomimetically curved culture membranes

There is increasing evidence that surface curvature at a near-cell-scale influences cell behaviour. Epithelial or endothelial cells lining small acinar or tubular body lumens, as those of the alveoli or blood vessels, experience such highly curved surfaces. In contrast, the most commonly used culture substrates for in vitro modelling of these human tissue barriers, ion track-etched membranes, offer only flat surfaces. Here, we propose a more realistic culture environment for alveolar cells based on biomimetically curved track-etched membranes, preserving the mainly spherical geometry of the cells' native microenvironment. The curved membranes were created by a combination of three-dimensional (3D) micro film (thermo)forming and ion track technology. We could successfully demonstrate the formation, the growth and a first characterization of confluent layers of lung epithelial cell lines and primary alveolar epithelial cells on membranes shaped into an array of hemispherical microwells. Besides their application in submerged culture, we could also demonstrate the compatibility of the bioinspired membranes for air-exposed culture. We observed a distinct cellular response to membrane curvature. Cells (or cell layers) on the curved membranes reveal significant differences compared to cells on flat membranes concerning membrane epithelialization, areal cell density of the formed epithelial layers, their cross-sectional morphology, and proliferation and apoptosis rates, and the same tight barrier function as on the flat membranes. The presented 3D membrane technology might pave the way for more predictive barrier in vitro models in future.

Current strategies and opportunities to manufacture cells for modeling human lungs

Chronic lung diseases remain major healthcare burdens, for which the only curative treatment is lung transplantation. In vitro human models are promising platforms for identifying and testing novel compounds to potentially decrease this burden. Directed differentiation of pluripotent stem cells is an important strategy to generate lung cells to create such models. Current lung directed differentiation protocols are limited as they do not 1) recapitulate the diversity of respiratory epithelium, 2) generate consistent or sufficient cell numbers for drug discovery platforms, and 3) establish the histologic tissue-level organization critical for modeling lung function. In this review, we describe how lung development has formed the basis for directed differentiation protocols, and discuss the utility of available protocols for lung epithelial cell generation and drug development. We further highlight tissue engineering strategies for manipulating biophysical signals during directed differentiation such that future protocols can recapitulate both chemical and physical cues present during lung development.

Improving the viability of tissue-resident stem cells using an organ-preservation solution

Human clinical specimens are a valuable source of tissue‐resident stem cells, but such cells need to be collected immediately after tissue collection. To extend the timescale for collection from fresh human samples, we developed a new extracellular fluid (ECF)‐type preservation solution based on a high‐sodium and low‐potassium solution containing low‐molecular‐weight dextran and glucose, which is used for preservation of organs for transplantation. In this study, we compared the preservation of tissue‐resident stem cells using our ECF solution with that using three other solutions: PBS, Dulbecco’s modified Eagle’s medium and Euro‐Collins solution. These solutions represent a common buffer, a common culture medium and a benchmark organ‐preservation solution, respectively. Lung tissues were removed from mice and preserved for 72 h under low‐temperature conditions. Of the solutions tested, only preservation in the ECF‐type solution could maintain the proliferation and differentiation capacity of mouse lung tissue‐resident stem cells. In addition, the ECF solution could preserve the viability and proliferation of human alveolar epithelial progenitor cells when stored for more than 7 days at 4 °C. The mean viability of human alveolar type II cells at 2, 5, 8 and 14 days of low‐temperature preservation was 90.9%, 84.8%, 85.7% and 66.3%, respectively, with no significant differences up to 8 days. Overall, our findings show that use of our ECF‐type preservation solution may maintain the viability and function of tissue‐resident stem cells. Use of this preservation solution may facilitate the investigation of currently unobtainable human tissue specimens for human stem cell biology.

Here, we describe a newly developed extracellular fluid‐type organ preservation solution that maintained the viability of human lung stem/progenitor cells, such as alveolar type II cells, during 7‐day refrigerated preservation after the collection of lung specimens in local hospitals. This ready‐to‐use solution may be suitable for the transport of human clinical specimens from hospitals to scientific and bioengineering laboratories.

Citrus Alkaline Extract Delayed the Progression of Pulmonary Fibrosis by Inhibiting p38/NF-κB Signaling Pathway-Induced Cell Apoptosis

Objective

To investigate the intervention effect and functioning mechanism of citrus alkaline extract (CAE) on bleomycin- (BLM-) induced pulmonary fibrosis in mice.

Methods

42 C57BL/6 male mice were assigned randomly to the normal group, model group, low (16mg/kg), medial (32mg/kg) and high (64mg/kg) CAE dosage groups, prednisone group (6mg/kg), and pirfenidone group (100mg/kg), respectively. One day after model construction, intragastric administration was applied to the mice once a day for 28 days and then killed. Body weights of mice were recorded. Their pulmonary tissues were subjected to HE staining and Masson's staining and then their degree of pulmonary alveolitis as well as pulmonary fibrosis was scored. Contents of hydroxyproline (HYP) and prostaglandin E2 (PGE2) in pulmonary tissues and levels of interleukin-17 (IL-17) in serum and bronchoalveolar lavage fluid (BALF) were determined by ELISA method. Expression of collagen I, collagen III, and Prosurfactant protein C (Pro-SPC) proteins in pulmonary tissue were measured immunohistochemically and that of nuclear transcription factor κB (NF-κB) and vimentin was determined by the immunofluorescence method. Apoptosis of pulmonary tissue was tested by the Tunel staining method, while the expression of MAPK-related protein was recorded by Western Blot assay.

Results

After CAE treatment, the body weight, PGE2 level, and Pro-SPC protein expression of pulmonary fibrosis mice were increased, while the score of pulmonary alveolitis and pulmonary fibrosis, levels of HYP and cell apoptosis, IL-17 contents of serum and BALF in pulmonary tissues, and expression of collagen I, collagen III, vimentin, NF-κB, and p-p38 were reduced.

Conclusion

CAE effectively delayed the progression of BLM-induced pulmonary fibrosis in pulmonary fibrosis mice and a possible mechanism is the inhibition of cell apoptosis of NF-κB/p38-mediated signaling pathway.

Curvature facilitates podocyte culture in a biomimetic platform

Most kidney diseases begin with abnormalities in glomerular podocytes, motivating the need for podocyte models to study pathophysiological mechanisms and new treatment options. However, podocytes cultured in vitro face a limited ability to maintain appreciable extents of differentiation hallmarks, raising concerns over the relevance of study results. Many key properties such as nephrin expression and morphology reach plateaus that are far from the in vivo levels. Here, we demonstrate that a biomimetic topography, consisting of microhemispheres arrayed over the cell culture substrate, promotes podocyte differentiation in vitro. We define new methods for fabricating microscale curvature on various substrates, including a thin porous membrane. By growing podocytes on our topographic substrates, we found that these biophysical cues augmented nephrin gene expression, supported full-size nephrin protein expression, encouraged structural arrangement of F-actin and nephrin within the cell, and promoted process formation and even interdigitation compared to the flat substrates. Furthermore, the topography facilitated nephrin localization on curved structures while nuclei lay in the valleys between them. The improved differentiation was also evidenced by tracking barrier function to albumin over time using our custom topomembranes. Overall, our work presents accessible methods for incorporating microcurvature on various common substrates, and demonstrates the importance of biophysical stimulation in supporting higher-fidelity podocyte cultivation in vitro.