Styrylbenzoquinoline dyads as a new type of fluorescing photochromes operating via [2 + 2] photocycloaddition mechanism: Optimization of the structure

We synthesized and studied a novel bichromophoric dyad in which bridging methylene groups link two styrylbenzo[f]quinoline (SBQ) photochromes to a salicylic acid residue. The dyad was designed for use as a fluorescent P-type photochrome acting via a [2 + 2] photocycloaddition (PCA) reaction. Compared to previously studied dyads, a change in the attachment handle and shortening of the bridging groups resulted in simultaneous rise of the quantum yields of both fluorescence and PCA. Under light irradiation, two competitive reversible reactions occurred in the dyad. The first is photoisomerization between the trans- and cis- isomers of the SBQ moieties. The second is PCA. The latter process was predominant and resulted in the formation of the cyclobutane ring bearing two benzo[f]quinoline (BQ) groups. In the ground S0 state, NMR data and DFT calculations indicated the formation of folded dyad conformers whose structure is pre-organized for PCA due to π-stacking interactions of two SBQ moieties. In the excited dyad, steady-state and time-resolved nanosecond fluorescence spectroscopy revealed the formation of an excimer, which was assumed to be a precursor of cyclobutane. Due to the fluorescence properties of SBQ and BQ, both dyad and cyclobutane fluoresce and can serve as a color-correlated multicolor fluorescence photoswitch. A simple approach is proposed for predicting the relationship between the spectral properties of the dyad and cyclobutane, which are the open and closed isomers of a new type of photochromes. The approach uses the dependence of the position of the maximum of the absorption band of an aromatic compound on the size of the π-system, as well as the fact that the sizes of the π-systems of the dyad and cyclobutane are related by a simple relation.

Improving Fatigue Resistance and Autonomous Switching of pH Responsive Hydrazones by Pulses of a Chemical Fuel

The chemically triggered reversible switching of pH-responsive hydrazones involves rotary motion-induced configurational changes, serving as a prototype for constructing an array of molecular machines. Typically, the configurational isomerization of such switches into two distinct forms (E/Z) occurs through the alteration of the pH the medium, achieved by successive additions of acid and base stimuli. However, this process results in intermittent operation due to the concomitant accumulation of salt after each cycle, limiting switching performance to only a few cycles (5-6). In this context, we introduce a novel strategy for the autonomous E/Z isomerization of hydrazones in acetonitrile using pulses of trichloroacetic acid as a chemical fuel. The use of this transient acid enabled reversible switching of hydrazones even after 50 cycles without causing significant fatigue. To test the broad viability of the fuel, a series of ortho/para-substituted hydrazones were synthesized and their switching performance was investigated. The analysis of kinetic data showed a strong dependency of switching operations including the lifetime of transient state, on the electronic properties of substituents. Finally, a distinct color change from yellow to orange due to reversible switching of the para-methoxy substituted hydrazone was employed for the creation of rewritable messages on commercially available paper.

Control of Photoisomerization Kinetics via Multistage Switching in Bimetallic Ru(II)-Terpyridine Complexes

In this study, we carried out detailed experimental and theoretical investigation on photophysical, electrochemical, and photoisomerization behaviors of a new array of luminescent binuclear Ru(II) complexes derived from a phenylene-vinylene-substituted terpyridyl ligand possessing RT lifetimes within 60.3-410.5 ns. The complexes experienced trans-to-cis isomerization in MeCN on irradiation with visible light, accompanied by significant changes in their absorption and emission spectral profiles. The reverse cis-to-trans process is also possible with the use of ultraviolet (UV) light. On conversion from trans to cis isomers, the emission intensity increases substantially, while for the reverse process, luminescence quenching occurs. Thus, "off-on" and "on-off" emission switching is facilitated upon treatment with visible and UV light alternatively. By the use of chemical oxidants (ceric ammonium nitrate and potassium permanganate) and reductants (metallic sodium) as well as light of appropriate wavelengths, multistate switching phenomena involving reversible oxidation-reduction and trans-cis isomerization have been achieved. Interestingly, the rate of this multistate photoswitching process becomes much faster compared to only two-state trans-cis isomerization of these complexes. Density functional theory (DFT) and time-dependent-DFT (TD-DFT) calculations are also performed to obtain a clear picture of the electronic environment of the complexes and also for the appropriate assignment of absorption and emission spectral bands.

Revisiting Peri-Aryloxyquinones: From a Forgotten Photochromic System to a Promising Tool for Emerging Applications

Emerging applications of photochromic compounds demand new molecular designs that can be inspired by some long-known yet currently forgotten classes of photoswitches. In the present review, we remind the community about Peri-AryloxyQuinones (PAQs) and their unique photoswitching behavior originally discovered more than 50 years ago. At the heart of this phenomenon is the light-induced migration of an aromatic moiety (arylotropy) in peri-aryloxy-substituted quinones resulting in ana-quinones. PAQs feature absorbance of both isomers in the visible spectral region, photochromism in the amorphous and crystalline state, and thermal stability of the photogenerated ana-isomer. Particularly noticeable is the high sensitivity of the ana-isomer towards nucleophiles in solution. In addition to the mechanism of molecular photochromism and the underlaying structure-switch relationships, we analyze potential applications and prospects of aryloxyquinones in optically switchable materials and devices. Due to their ability to efficiently photoswitch in the solid state, PAQs are indeed attractive candidates for such materials and devices, including electronics (optically controllable circuits, switches, transistors, memories, and displays), porous crystalline materials, crystalline actuators, photoactivated sensors, and many more. This review is intended to serve as a guide for researchers who wish to use photoswitchable PAQs in the development of new photocontrollable materials, devices, and processes.

Janus-Type ESIPT Chromophores with Distinctive Intramolecular Hydrogen-bonding Selectivity

Excited-state intramolecular proton transfer (ESIPT)-based solid luminescent materials with multiple hydrogen bond acceptors (HBAs) remain unexplored. Herein, we introduced a family of Janus-type ESIPT chromophores featuring distinctive hydrogen bond (H-bond) selectivity between competitive HBAs in a single molecule. Our investigations showed that the central hydroxyl group preferentially forms intramolecular H-bonds with imines in imine-modified 2-hydroxyphenyl benzothiazole (HBT) chromophores but tethers the benzothiazole moiety in hydrazone-modified HBT chromophores. Imine-derived HBTs generally exhibit higher fluorescence efficiency, while hydrazone-derived HBTs show a reduced overlap between the absorption and fluorescence bands. Quantum chemical calculations unveiled the molecular origins of the biased intramolecular H-bonds and their impact on the ESIPT process. This Janus-type ESIPT chromophore skeleton provides new opportunities for the design of solid luminescent materials.

Metal and Proton Relay-Controlled Hierarchical Multistep Switching Cascade

Transition metals play an important role in many biological processes including cellular regulation and signal transduction. Emulating such processes on the molecular level, while challenging, can help us learn how to manipulate intermolecular communication, an important requirement for the development of solution-based molecular machines. In this work, we demonstrate a transition metal-based artificial multistep switching cascade that exhibits intrinsic hierarchical level control. The process starts with Zn(II), which initiates a transition metal relay by displacing a macrocycle-encapsulated Pd(II). The latter then binds to a hydrazone switch leading to coordination-coupled deprotonation (CCD). Finally, the proton generated through CCD activates the E/Z isomerization of a second noncoordinating pH-sensitive hydrazone switch. This whole multistep process can be reset to the original state by removing the Pd(II) from the system.

Red-light photoswitching of indigos in polymer thin films

Through simple synthetic derivatisation, the parent indigo dye becomes a red-light E-Z photoswitch exhibiting negative photochromism and tuneable thermal isomerisation kinetics. These attributes make indigo derivatives extremely attractive for applications related to materials and living systems. However, there is a lack of knowledge in translating indigo photoswitching dynamics from solution to solid state - the environment crucial for most applications. Herein, we study the photoswitching performance of six structurally distinct indigo derivatives in five polymers of varying rigidity. Three key strategies are identified to enable efficient photoswitching under red (660 nm) light: (i) choosing a soft polymer matrix to minimise its resistance toward the isomerisation, (ii) creating free volume around the indigo molecules through synthetic modifications, and (iii) applying low dye loading (<1% w/w) to inhibit aggregation. These strategies are shown to improve both photostationary state distributions and the thermal stability of the Z isomer. When all three strategies are implemented, the isomerisation performance (>80% Z form in the photostationary state) is nearly identical to that in solution. These findings thus pave the way for designing new red-light photochromic materials based on indigos.

Photoresponsive Supramolecular Polymers: From Light-Controlled Small Molecules to Smart Materials

Photoresponsive supramolecular polymers are well-organized assemblies based on highly oriented and reversible noncovalent interactions containing photosensitive molecules as (co-)monomers. They have attracted increasing interest in smart materials and dynamic systems with precisely controllable functions, such as light-driven soft actuators, photoresponsive fluorescent anticounterfeiting and light-triggered electronic devices. The present review discusses light-activated molecules used in photoresponsive supramolecular polymers with their main photo-induced changes, e.g., geometry, dipole moment, and chirality. Based on these distinct changes, supramolecular polymers formed by light-activated molecules exhibit photoresponsive disassembly and reassembly. As a consequence, photo-induced supramolecular polymerization, "depolymerization," and regulation of the lengths and topologies are observed. Moreover, the light-controlled functions of supramolecular polymers, such as actuation, emission, and chirality transfer along length scales, are highlighted. Furthermore, a perspective on challenges and future opportunities is presented. Besides the challenge of moving from harmful UV light to visible/near IR light avoiding fatigue, and enabling biomedical applications, future opportunities include light-controlled supramolecular actuators with helical motion, light-modulated information transmission, optically recyclable materials, and multi-stimuli-responsive supramolecular systems.

Tuning the pH of Activation of Fluorinated Hydrazone-Based Switches─A Pathway to Versatile 19F Magnetic Resonance Imaging Contrast Agents

Molecular switches have become an area of great interest in recent years. They are explored as high-density data storage and organic diodes in molecular electronics as well as chemosensors due to their ability to undergo a transition between well-defined structures under the action of external stimuli. One of the types of such switches is hydrazones. They work by changing the configuration from E to Z under the influence of pH or light. The change in configuration is accompanied by a change in the absorption band and changes in the nuclear magnetic resonance (NMR) spectrum. In this publication, the structure-property relationship of fluorinated hydrazone switches was established. A linear relationship between the Hammett substituent constants and the pH where the switching occurs was found. Introduction of strong electron-donating groups allowed obtaining a hydrazone switch of pK_a = 6 suitable for application in ¹⁹F MRI as contrast agents.

Heterocyclic Hemipiperazines: Water-Compatible Peptide-Derived Photoswitches

Hemipiperazines are a recently discovered class of peptide-derived molecular photoswitches with high biocompatibility and therapeutic potential. Here, for the first time we describe photochromism of heterocyclic hemipiperazines. They demonstrate long thermal lifetimes, and enlarged band separation between photoisomers. Efficient photoisomerization occurs under aqueous conditions, although with a need for organic co-solvent. Bidirectional switching with visible light is observed for an extended aromatic system.

Progress and prospects toward supramolecular bioactive ion transporters

The majority of cellular physiological processes depend on natural ion channels, which are pore-forming membrane-embedded proteins that let ions flow across the cell membranes selectively. This selective movement of ions across the membranes balances the osmolality within and outside the cell. However, mutations in the genes that encode essential membrane transport proteins or structural reorganisation of these proteins can cause life-threatening diseases like cystic fibrosis. Artificial ion transport systems have opened up a way to replace dysfunctional natural ion channels to cure such diseases through channel replacement therapy. Moreover, recent research has also demonstrated the ability of these systems to kill cancer cells, reigniting interest in the field among scientists. Our contributions to the recent progress in the design and development of artificial chloride ion transporters and their effect on biological systems have been discussed in this review. This review would provide current vistas and future directions toward the development of novel ion transporters with improved biocompatibility and desired anti-cancer properties. Additionally, it strongly emphasises stimuli-responsive ion transport systems, which are crucial for obtaining target-specificity and may speed up the application of these systems in clinical therapeutics.

Confinement-Driven Photophysics in Hydrazone-Based Hierarchical Materials

Confinement-imposed photophysics was probed for novel stimuli-responsive hydrazone-based compounds demonstrating a conceptual difference in their behavior within 2D versus 3D porous matrices for the first time. The challenges associated with photoswitch isomerization arising from host interactions with photochromic compounds in 2D scaffolds could be overcome in 3D materials. Solution-like photoisomerization rate constants were realized for sterically demanding hydrazone derivatives in the solid state through their coordinative immobilization in 3D scaffolds. According to steady-state and time-resolved photophysical measurements and theoretical modeling, this approach provides access to hydrazone-based materials with fast photoisomerization kinetics in the solid state. Fast isomerization of integrated hydrazone derivatives allows for probing and tailoring resonance energy transfer (ET) processes as a function of excitation wavelength, providing a novel pathway for ET modulation.

Light-Responsive Solid-Solid Phase Change Materials for Photon and Thermal Energy Storage

We report a series of adamantane-functionalized azobenzenes that store photon and thermal energy via reversible photoisomerization in the solid state for molecular solar thermal (MOST) energy storage. The adamantane unit serves as a 3D molecular separator that enables the spatial separation of azobenzene groups and results in their facile switching even in the crystalline phase. Upon isomerization, the phase transition from crystalline to amorphous solid occurs and contributes to additional energy storage. The exclusively solid-state MOST compounds with solid-solid phase transition overcome a major challenge of solid-liquid phase transition materials that require encapsulation for practical applications.

Monitoring the photochemistry of a formazan over 15 orders of magnitude in time

2,3,5-triphenyltetrazolium chloride (TTC) may convert into phenyl-benzo[c]tetrazolocinnolium chloride (PTC) and 1,3,5-triphenylformazan (TPF) under irradiation with light. The latter reaction, albeit enzymatically rather than photochemically, is used in so-called TTC assays indicating cellular respiration and cell growth. In this paper, we address the photochemistry of TPF with time-resolved spectroscopy on various time scales. TPF is stabilized by an intramolecular hydrogen bond and switches photochemically via an E-Z isomerization around an N=N double bond into another TPF-stereoisomer, from which further isomerizations around the C=N double bond of the phenylhydrazone group are possible. We investigate the underlying processes by time-resolved spectroscopy in dependence on excitation wavelength and solvent environment, resolving several intermediates over a temporal range spanning 15 orders of magnitude (hundreds of femtoseconds to hundreds of seconds) along the reaction path. In a quantum-chemical analysis, we identify 16 stable ground-state isomers and discuss which ones are identified in the experimental data. We derive a detailed scheme how these species are thermally and photochemically interconnected and conclude that proton transfer processes are involved.

Synthesis and Strong Solvatochromism of Push-Pull Thienylthiazole Boron Complexes

The solvatochromic behavior of two donor-π bridge-acceptor (D-π-A) compounds based on the 2-(3-boryl-2-thienyl)thiazole π-linker and indandione acceptor moiety are investigated. DFT/TD-DFT calculations were performed in combination with steady-state absorption and emission measurements, along with electrochemical studies, to elucidate the effect of two different strongly electron-donating hydrazonyl units on the solvatochromic and fluorescence behavior of these compounds. The Lippert–Mataga equation was used to estimate the change in dipole moments (Δµ) between ground and excited states based on the measured spectroscopic properties in solvents of varying polarity with the data being supported by theoretical studies. The two asymmetrical D-π-A molecules feature strong solvatochromic shifts in fluorescence of up to ~4300 cm⁻¹ and a concomitant change of the emission color from yellow to red. These changes were accompanied by an increase in Stokes shift to reach values as large as ~5700–5800 cm⁻¹. Quantum yields of ca. 0.75 could be observed for the N,N-dimethylhydrazonyl derivative in nonpolar solvents, which gradually decreased along with increasing solvent polarity, as opposed to the consistently reduced values obtained for the N,N-diphenylhydrazonyl derivative of up to ca. 0.20 in nonpolar solvents. These two push–pull molecules are contrasted with a structurally similar acceptor-π bridge-acceptor (A-π-A) compound.

Molecular Motion and Nonradiative Decay: Towards Efficient Photothermal and Photoacoustic Systems

Nonradiative decay invariably competes with radiative decay during the deexcitation process of matter. In the community of luminescence research, nonradiative decay has been deemed less attractive than radiative decay. However, all things in their being are good for something and so is nonradiative decay. As the molecular motion-facilitated nonradiative decay (MMFND) effect is inevitable in photophysical processes, it provides a new avenue to convert the harvested light energy into exploitable forms by harnessing molecular motion. In many cases, active molecular motion enables thermal deactivation from excited states. In this Minireview, recent advances in photothermal and photoacoustic systems with MMFND character are summarized. We believe that this presentation of the rational engineering of molecular motion for efficient photothermal generation will deepen the understanding of the relationship between molecular motion and nonradiative decay and navigate people to rethink the positive aspects of nonradiative decay for the establishment of new light-controllable techniques.

Photon Energy Storage in Strained Cyclic Hydrazones: Emerging Molecular Solar Thermal Energy Storage Compounds

The generally small Gibbs free energy difference between the Z and E isomers of hydrazone photoswitches has so far precluded their use in photon energy storing applications. Here, we report on a series of cyclic and acyclic hydrazones, which possess varied degrees of ring strain and, hence, stability of E isomers. The photoinduced isomerization and concurrent phase transition of the cyclic hydrazones from a crystalline to a liquid phase result in the storage of a large quantity of energy, comparable to that of azobenzene derivatives. We demonstrate that the macrocyclic photochrome design in combination with phase transition is a promising strategy for molecular solar thermal energy storage applications.

Photoswitchable Binary Nanopore Conductance and Selective Electronic Detection of Single Biomolecules under Wavelength and Voltage Polarity Control

We fabricated photoregulated thin-film nanopores by covalently linking azobenzene photoswitches to silicon nitride pores with ∼10 nm diameters. The photoresponsive coatings could be repeatedly optically switched with deterministic ∼6 nm changes to the effective nanopore diameter and of ∼3× to the nanopore ionic conductance. The sensitivity to anionic DNA and a neutral complex carbohydrate biopolymer (maltodextrin) could be photoswitched "on" and "off" with an analyte selectivity set by applied voltage polarity. Photocontrol of nanopore state and mass transport characteristics is important for their use as ionic circuit elements (e.g., resistors and binary bits) and as chemically tuned filters. It expands single-molecule sensing capabilities in personalized medicine, genomics, glycomics, and, augmented by voltage polarity selectivity, especially in multiplexed biopolymer information storage schemes. We demonstrate repeatedly photocontrolled stable nanopore size, polarity, conductance, and sensing selectivity, by illumination wavelength and voltage polarity, with broad utility including single-molecule sensing of biologically and technologically important polymers.

Ratiometric pH-Responsive 19F Magnetic Resonance Imaging Contrast Agents Based on Hydrazone Switches

Hydrazone-based molecular switches serve as efficient ratiometric pH-sensitive agents that can be tracked with ¹⁹F NMR/MRI and ¹H NMR. Structural changes induced between pH 3 and 4 lead to signal appearance and disappearance at ¹H and ¹⁹F NMR spectra allowing ratiometric pH measurements. The most pronounced are resonances of the CF₃ group shifted by 1.8 ppm with ¹⁹F NMR and a hydrazone proton shifted by 2 ppm with ¹H NMR.

Visible light activated BINOL-derived chiroptical switches based on boron integrated hydrazone complexes

Chiral optical switches, which use light to control chirality in a reversible manner, offer unique properties and fascinating prospects in the areas of molecular switching and responsive systems, new photochromic materials and molecular data processing and storage. Herein, we report visible light responsive chiroptical switches based on tetrahedral boron coordination towards an easily accessible hydrazone ligand and optically pure BINOL. Upon instalment of a non-planar dibenzo[a,d]-cycloheptene moiety in the hydrazone ligand's lower half, the enantiopure boron complex shows major chiroptical changes in the CD read-out after visible light irradiation. The thermal isomerization barrier in these chiroptical switching systems showed to be easily adjustable by the introduction of substituents onto the olefinic bond of the cycloheptene ring, giving profound control over their thermal stability. The control over their thermal stability in combination with excellent reversibility, photochemical properties and overall robustness of the complexes makes these BINOL-derived chiroptical switches attractive candidates for usage in advanced applications, e.g. photonic materials and nanotechnology.

Chiroptical switches, which use light to control chirality in a reversible manner, offer unique properties and fascinating prospects in the areas of molecular responsive systems, new photochromic materials and molecular data processing and storage.

“The red cage”: implementation of pH-responsiveness within a macrobicyclic pyridinium-based molecular host

The “red cage”, a new pyridinium-based macrobicyclic host, has been found to complex model aromatic substrates in aqueous media in a pH-responsive fashion.

Molecular photoswitches in aqueous environments

Molecular photoswitches enable dynamic control of processes with high spatiotemporal precision, using light as external stimulus, and hence are ideal tools for different research areas spanning from chemical biology to smart materials. Photoswitches are typically organic molecules that feature extended aromatic systems to make them responsive to (visible) light. However, this renders them inherently lipophilic, while water-solubility is of crucial importance to apply photoswitchable organic molecules in biological systems, like in the rapidly emerging field of photopharmacology. Several strategies for solubilizing organic molecules in water are known, but there are not yet clear rules for applying them to photoswitchable molecules. Importantly, rendering photoswitches water-soluble has a serious impact on both their photophysical and biological properties, which must be taken into consideration when designing new systems. Altogether, these aspects pose considerable challenges for successfully applying molecular photoswitches in aqueous systems, and in particular in biologically relevant media. In this review, we focus on fully water-soluble photoswitches, such as those used in biological environments, in both in vitro and in vivo studies. We discuss the design principles and prospects for water-soluble photoswitches to inspire and enable their future applications.

Push-Pull Stiff-Stilbene: Proton-Gated Visible-Light Photoswitching and Acid-Catalyzed Isomerization

Donor‐acceptor substituted stiff‐stilbene is shown to undergo isomerization induced by visible light avoiding the need for harmful UV light. This visible‐light photoswitching is inhibited by protonation of the dimethylamino‐donor unit, disrupting the push‐pull character and thus, gating of the photochromic properties is allowed by acid/base addition. Remarkably, the addition of a mild acid also triggers fast thermal back‐isomerization, which is unprecedented for stiff‐stilbene photoswitches usually having a very high energy barrier for this process. These combined features offer unique orthogonal control over switching behavior by light and protonation, which is investigated in detail by ¹H NMR and UV/Vis spectroscopy. In addition, TD‐DFT calculations are used to gain further insight into the absorption properties. Our results will help elevating the level of control over dynamic behavior in stiff‐stilbene applications.

Stimuli-Responsive Anion Transport through Acylhydrazone-Based Synthetic Anionophores

Photoswitchable acylhydrazone-based synthetic anionophores are reported. Single-crystal X-ray structure and ¹H NMR titration studies confirmed the chloride binding in solid and solution states. The ion transport activity of 1a was greatly attenuated through a phototriggered E to Z photoisomerization process, and the photoisomerized deactivated state showed high kinetic stability due to an intramolecular hydrogen bond. Switchable "OFF-ON" transport activity was achieved by the application of light and acid-catalyzed reactivation process.

Hydrogen-Bonded Dimeric Capsules with Appended Spiropyran Units: Towards Controlled Cargo Release

We report the synthesis of unprecedented tetra-urea derivatives of calix[4]arene and calix[4]pyrrole containing four spiropyran (SP) units at their upper rim. We investigate the photo- and acid-induced isomerization of the monomeric and homo-dimeric tetra-ureas derivatives using UV-Vis and ¹ H NMR spectroscopies. At micromolar concentration, irradiation of the samples with 365 nm light induces changes in their absorption spectra that are consistent with SP→merocyanine (MC) isomerization. However, analogous experiments at millimolar concentration do not produce noticeable changes in the ¹ H NMR spectra. The addition of triflic acid to micromolar and millimolar solutions of the tetra-ureas produces the quantitative isomerization of the SP units to the protonated merocyanine form (E-MCH⁺ ) and the simultaneous disassembly of the capsular dimers to form ill-defined aggregates. The neutralization of the acid solutions resets the SP form. Under these acid/base treatment conditions, the controlled release of the included guest and the reassembly of the all-SP tetra-urea dimers occurs at different extents depending on its calix[4]arene or calix[4]pyrrole scaffold.

Sterically Protected and Conformation-Restricted BOBHY Dyes with Bright Near-Infrared Fluorescence: N2O-type Expanded BOPHY Dyes Derived from Boronic Acids

A new family of N₂O-type hydrazine-containing bipyrrole boron complexes has been developed via a one-pot condensation of formylisoindole, hydrazine, and various organoboronic acids. Because of the conformation-restricted coplanar structure and the axial-substituted aryl groups, these novel dyes show deep-red absorption, bright near-infrared (NIR) fluorescence in both solution and solid states, and good solubility in organic solvents. The derivative with pyridinium ions also has been synthesized as an NIR mitochondrially targetable fluorescent probe.

DNA Functionality with Photoswitchable Hydrazone Cytidine*

A new family of hydrazone modified cytidine phosphoramidite building block was synthesized and incorporated into oligodeoxynucleotides to construct photoswitchable DNA strands. The E-Z isomerization triggered by the irradiation of blue light with a wavelength of 450 nm was investigated and confirmed by ¹ H NMR spectroscopy and HPLC in the contexts of both nucleoside and oligodeoxynucleotide. The light activated Z form isomer of this hydrazone-cytidine with a six-member intramolecular hydrogen bond was found to inhibit DNA synthesis in the primer extension model by using Bst DNA polymerase. In addition, the hydrazone modification caused the misincorporation of dATP together with dGTP into the growing DNA strand with similar selectivity, highlighting a potential G to A mutation. This work provides a novel functional DNA building block and an additional molecular tool that has potential chemical biology and biomedicinal applications to control DNA synthesis and DNA-enzyme interactions using the cell friendly blue light irradiation.

Molecular Pumps and Motors

Pumps and motors are essential components of the world as we know it. From the complex proteins that sustain our cells, to the mechanical marvels that power industries, much we take for granted is only possible because of pumps and motors. Although molecular pumps and motors have supported life for eons, it is only recently that chemists have made progress toward designing and building artificial forms of the microscopic machinery present in nature. The advent of artificial molecular machines has granted scientists an unprecedented level of control over the relative motion of components of molecules through the development of kinetically controlled, away-from-thermodynamic equilibrium chemistry. We outline the history of pumps and motors, focusing specifically on the innovations that enable the design and synthesis of the artificial molecular machines central to this Perspective. A key insight connecting biomolecular and artificial molecular machines is that the physical motions by which these machines carry out their function are unambiguously in mechanical equilibrium at every instant. The operation of molecular motors and pumps can be described by trajectory thermodynamics, a theory based on the work of Onsager, which is grounded on the firm foundation of the principle of microscopic reversibility. Free energy derived from thermodynamically non-equilibrium reactions kinetically favors some reaction pathways over others. By designing molecules with kinetic asymmetry, one can engineer potential landscapes to harness external energy to drive the formation and maintenance of geometries of component parts of molecules away-from-equilibrium, that would be impossible to achieve by standard synthetic approaches.

Artificial light-harvesting systems (LHSs) based on boron-difluoride (BF2) hydrazone complexes (BODIHYs)

The hydrazone based BF₂–complexes (BODIHYs; B1–B2) have been synthesized and their photophysical and aggregation behavior have been established. These BODIHYs have been showed light harvesting properties in presence of RhB as acceptor.

Solid state emissive azo-Schiff base ligands and their Zn(ii) complexes: acidochromism and photoswitching behaviour

Two novel azo Schiff base ligands L1 and L2 and Zn(ii) complexes C1 and C2 exhibiting reversible acidochromic behavior and photoswitching properties have been described.

Trace mild acid-catalysed Z → E isomerization of norbornene-fused stilbene derivatives: intelligent chiral molecular photoswitches with controllable self-recovery

Stilbene derivatives have long been known to undergo “acid-catalyzed” Z → E isomerization, where a strong mineral acid at high concentration is practically necessary. Such severe reaction conditions often cause undesired by-reactions and limit their potential application. Herein, we present a trace mild acid-catalyzed Z → E isomerization found with stilbene derivatives fused with a norbornene moiety. By-reactions, such as the migration of the C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> C double bond and electrophilic addition reactions, were completely inhibited because of the ring strain caused by the fused norbornene component. Direct photolysis of the E isomers at selected wavelengths led to the E → Z photoisomerization of these stilbene derivatives and thus constituted a unique class of molecular switches orthogonally controllable by light and acid. The catalytic amount of acid could be readily removed, and the Z → E isomerization could be controlled by turning on/off the irradiation of a photoacid, which allowed repeated isomerization in a non-invasive manner. Moreover, the Z isomer produced by photoisomerization could spontaneously self-recover to the E isomer in the presence of a catalytic amount of acid. The kinetics of Z → E isomerization were adjustable by manipulating catalytic factors and, therefore, unprecedented molecular photoswitches with adjustable self-recovery were realized.

Quantitative Z → E isomerization was catalyzed by trace mild acids to offer molecular switches orthogonally controllable by acid and light.

Toward Molecular Cybernetics - the Art of Communicating Chemical Systems

The emerging field of molecular cybernetics has the potential to widely broaden our perception of chemistry. Chemistry will develop beyond its current focus that is mainly concerned with single transformations, pure compounds, and/or defined mixtures. On this way, chemistry will become autonomous, networked and smart through communicating molecules each of which serves a control engineering purpose, like the set of wheels in the machinery of life. The present personal account describes our latest developments in this field.

Site-to-site peptide transport on a molecular platform using a small-molecule robotic arm

Peptides attached to a cysteine hydrazide ‘transporter module’ are transported selectively in either direction between two chemically similar sites on a molecular platform, enabled by the discovery of new operating methods for a molecular transporter that functions through ratcheting. Substrate repositioning is achieved using a small-molecule robotic arm controlled by a protonation-mediated rotary switch and attachment/release dynamic covalent chemistry. A polar solvent mixtures were found to favour Z to E isomerization of the doubly-protonated switch, transporting cargo in one direction (arbitrarily defined as ‘forward’) in up to 85% yield, while polar solvent mixtures were unexpectedly found to favour E to Z isomerization enabling transport in the reverse (‘backward’) direction in >98% yield. Transport of the substrates proceeded in a matter of hours (compared to 6 days even for simple cargoes with the original system) without the peptides at any time dissociating from the machine nor exchanging with others in the bulk. Under the new operating conditions, key intermediates of the switch are sufficiently stabilized within the macrocycle formed between switch, arm, substrate and platform that they can be identified and structurally characterized by ¹H NMR. The size of the peptide cargo has no significant effect on the rate or efficiency of transport in either direction. The new operating conditions allow detailed physical organic chemistry of the ratcheted transport mechanism to be uncovered, improve efficiency, and enable the transport of more complex cargoes than was previously possible.

Peptides are transported in either direction between chemically similar sites on a molecular platform, substrate repositioning is achieved using a cysteine hydrazide transporter module and a small-molecule robotic arm controlled by a rotary switch.

Electrocatalytic oxidative Z/E isomerization of a stilbene favoured by the presence of an electroactive persistent radical

A push-pull-functionalized stilbene has been prepared, with an electroactive perchlorotriphenylmethyl (PTM˙) radical and dimethylamine units as electron-withdrawing and -donating moieties, respectively, showing an electrocatalytic redox-induced Z→E isomerization where the open-shell nature of PTM˙ plays a key role in the isomerization ocurrance.

Stiff-Stilbene Photoswitches: From Fundamental Studies to Emergent Applications

Stiff-stilbene, a sterically restricted fused ring analogue of stilbene, has been regularly used as a model compound in theoretical studies of stilbene photoisomerization. Lately, owing to its excellent photoswitching properties, it is increasingly being applied to reversibly control the properties and function of chemical as well as biological systems. Stiff-stilbene photoswitches possess a number of advantageous properties including a high quantum yield for photoisomerization and a high thermal stability. Furthermore, they undergo a large geometrical change upon isomerization and their synthesis is straightforward. Herein, we provide an overview of the basic properties of stiff-stilbene and of recent applications in supramolecular chemistry, catalysis, and biological systems.

Spectroscopic Study of the E/Z Photoisomerization of a New Cyrhetrenyl Acylhydrazone: A Potential Photoswitch and Photosensitizer†

The new cyrhetrenyl acylhydrazone [(CO)₃ Re(η⁵ -C₅ H₄ )-C(O)-NH-N = C(CH₃ )-(2-C₄ H₂ S-5-NO₂ )] (E-CyAH) has been designed, synthesized and fully characterized to study the effect of having a cyrhetrenyl fragment (sensitizer) covalently bonded to an acylhydrazone moiety (switch), on its photophysical and photochemical properties. The crystal structure reveals that E-CyAH adopts an E-configuration around the iminic moiety [-N = C(CH₃ )]. The absorption spectrum of E-CyAH displays two bands at 270 and 380 nm, which are mainly ascribed to π → π* intraligand (IL) and d_π  → π* metal-to-ligand charge transfer (MLCT) transitions, being consistent with DFT/TD-DFT calculations. Upon 365 nm irradiation, E-CyAH photoisomerizes to Z-CyAH, as evidenced by UV-Vis and ¹ H-NMR spectral changes, with a quantum yield value Φ_{E -CyAH → Z -CyAH} of 0.30. Z-CyAH undergoes a first-order thermal back-isomerization process, with a relatively short half-life τ_1/2 of 277 min. Consequently, E-CyAH was quantitatively recovered after 24 h, making it a fully reversible T-type molecular photoswitch. This remarkable behavior allows us to measure the individual photophysical properties for both isomers. In addition, E-CyAH and Z-CyAH efficiently photosensitize the generation of singlet oxygen (O₂ (¹ Δ_g )) with good yield (Φ_Δ  = 0.342).

The second-order NLO property of a photoswitchable heteroditpioc ion-pair receptor based on 2-pyridyl acylhydrazone linking with 2,6-pyridine bisamide: The impacts of metal cations and anions

A photoswitchable heteroditpioc ion-pair receptor E-1 and its isomeride Z-1 (without the anion binding site), that are based on the 2-pyridyl acylhydrazone linking 2,6-pyridine bisamide, have brought our attention to systematically explore the second-order nonlinear optical (NLO) properties by the density functional theory (DFT). In this work, we mainly studied the influences of metal cations (M = Na⁺, K⁺, Mg²⁺, Ca²⁺, Hg²⁺ and Pb²⁺), anions (X = Cl^-, Br^- and I^-) and ion-pair (NaCl, NaBr and NaI) on NLO responses for the receptor. In addition, the impacts of isomerization and poto-switching processes on NLO response for these systems also have been discussed detailedly. The results show that the isomerization process does not effectively adjust the NLO properties for our studied systems. But the poto-switching process that was triggered by light to capure or release ions plays an important role in improving the NLO properties. The receptors E-1 and Z-1 are excellent candidates to effectively detect metal cation Pb²⁺, because the first hyperpolarizability (β_tot) values of E∗Pb²⁺ and Z∗Pb²⁺ increased by 13 times and 20 times relative to that of receptors E-1 (188.06 a.u.) and Z-1 (270.21 a.u.), respectively. In addition, the receptor E-1 has the possibility to detect anion I^- due to the larger β_tot values compared with other anion-complexes. However, the changes of NLO responses for ion-pair complexes are not obvious compared with corresponding anion-complexes. We are looking forward to the research would be beneficial for further theoretical and experimental studies on recognizing metal cations and anions based on large second-order NLO difference.

Dynamic Covalent Chemistry as a Facile Route to Unusual Main-Group Thiolate Assemblies and Disulfide Hoops and Cages

Dynamic Covalent Chemistry (DCC) - combining the robustness of covalent bonds with the self-correcting nature of supramolecular chemistry - facilitates the modular synthesis of complex molecular assemblies in high yields. Although numerous reactions form covalent bonds, only a small set of chemical transformations affect covalent bond formation reversibly under suitable conditions for DCC. Further progress in this area still requires the identification of dynamic motifs and greater insights into their reversibility. We have fruitfully employed DCC of both thiolate coordination to main-group elements and disulfide formation for the facile self-assembly of: (1) metal/metalloid-thiolate assemblies, and (2) purely organic cyclic and caged disulfides, thioethers, and even hydrocarbons, many of which have remained elusive by traditional stepwise synthesis yet form readily through our methods. In this Minireview, we highlight the approaches to prepare these unusual compounds and the factors inducing structural transformations or favoring the formation of certain products over others, given a set of external stimuli or reaction conditions.