An unexpected imidazole-induced porphyrinylphosphonate-based MOF-to-HOF structural transformation leading to the enhancement of proton conductivity

Post-synthetic modification of proton-conducting metal-organic frameworks (MOFs) by loading small molecules capable of generating protons into pores is an efficient approach for developing a new type of material with improved ionic conductivity. Herein, the synthesis, characterization and proton conductivity of a novel electroneutral MOF based on palladium(II) meso-tetrakis(4-(phosphonatophenyl))porphyrinate, IPCE-1Pd, are reported. The exposure of the obtained framework to imidazole by the diffusion vapor method has surprisingly led to its complete crystal-to-crystal MOF-to-HOF transformation, resulting in the formation of a novel hydrogen-bonded organic framework (HOF) IPCE-1Pd_Im, which is the first example of such kind of structural change among all known MOFs. This modification has led to an almost 25-fold increase in the proton conductivity in comparison with the pristine MOF, reaching up to 6.54 × 10-3 S cm-1 at 85 °C and 95% relative humidity, which is one of the highest values among all known porphyrin-based HOFs.

Porous Metal Phosphonate Frameworks: Construction and Physical Properties

ConspectusPorous metal phosphonate frameworks (PMPFs) as a subclass of metal-organic frameworks (MOFs) have promising applications in the fields of gas adsorption and separation, ion exchange and storage, catalysis, sensing, etc. Compared to the typical carboxylate-based MOFs, PMPFs exhibit higher thermal and water stability due to the strong coordination ability of the phosphonate ligands. Despite their robust frameworks, PMPFs account for less than 0.51% of the porous MOFs reported so far. This is because metal phosphonates are highly susceptible to the formation of dense layered or pillared-layered structures, and they precipitate easily and are difficult to crystallize. There is a tendency to use phosphonate ligands containing multiple phosphonate groups and large organic spacers to prevent the formation of dense structures and generate open frameworks with permanent porosity. Thus, many PMPFs are composed of chains or clusters of inorganic metal phosphonates interconnected by organic spacers. Using this feature, a wide range of metal ions and organic components can be selected, and their physical properties can be modulated. However, limited by the small number of PMPFs, there are still relatively few studies on the physical properties of PMPFs, some of which merely remain in the description of the phenomena and lack in-depth elaboration of the structure-property relationship. In this Account, we review the strategies for constructing PMPFs and their physical properties, primarily based on our own research. The construction strategies are categorized according to the number (n = 1-4) of phosphonate groups in the ligand. The physical properties include proton conduction, electrical conduction, magnetism, and photoluminescence properties. Proton conductivity of PMPFs can be enhanced by increasing the proton carrier concentration and mobility. The former can be achieved by adding acidic groups such as -POH and/or introducing acidic guests in the hydrophilic channels. The latter can be attained by introducing conjugate acid-base pairs or elevating the temperature. Semiconducting PMPFs, on the other hand, can be obtained by constructing highly conjugated networks of coordination bonds or introducing large conjugated organic linkers π-π stacked in the lattice. In the case of magnetic PMPFs, long-range magnetic ordering occurs at very low temperatures due to very weak magnetic exchange couplings propagated via O-P-O and/or O(P) units. However, lanthanide compounds may be interesting candidates for single-molecule magnets because of the strong single-ion magnetic anisotropy arising from the spin-orbit coupling and large magnetic moments of lanthanide ions. The luminescent properties of PMPFs depend on the metal ions and/or organic ligands. Emissive PMPFs containing lanthanides and/or uranyl ions are promising for sensing and photonic applications. We conclude with an outlook on the opportunities and challenges for the future development of this promising field.

Phosphonate-substituted porphyrins as efficient, cost-effective and reusable photocatalysts

Recent advances in visible light photocatalysis represent a significant stride towards sustainable catalytic chemistry. However, its successful implementation in fine chemical production remains challenging and requires careful optimization of available photocatalysts. Our work aims to structurally modify bioinspired porphyrin catalysts, addressing issues related to their laborious synthesis and low solubility, with the goal of increasing their efficiency and developing reusable catalytic systems. We have demonstrated the catalytic potential of readily available meso-tetrakis[4-(diethoxyphosphoryl)phenyl]porphyrins (M(TPPP)). Novel metal (Pd(II), Co(II) and In(III)) complexes with this ligand were prepared in good yields. These chromophores were characterized in solution using spectroscopic (NMR, UV-vis, fluorescence) and electrochemical methods. The introduction of phosphonate groups on the phenyl substituents of meso-tetraphenylporphyrins (M(TPP)) improves solubility in polar organic solvents without significantly altering the photophysical properties and photostability of complexes. This structural modification also leads to easier reductions and harder oxidations of the macrocycle for all investigated complexes compared to the corresponding TPP derivatives. The free base porphyrin, zinc(II), palladium(II), and indium(III) complexes were studied as photocatalysts for oxidation of sulfides to sulfoxides using molecular oxygen as a terminal oxidant. Both dialkyl and alkyl aryl sulfides were quantitatively transformed into sulfoxides under blue LED irradiation in the acetonitrile-water mixture (10 : 1 v/v) with a low loading (0.005-0.05 mol%) of porphyrin photocatalysts, where H2(TPPP) and Pd(TPPP) were found to be the most efficient. The reaction mechanism was studied using photoluminescence and EPR spectroscopies. Then, to access reusable catalysts, water-soluble derivatives bearing phosphonic acid groups, H2(TPPP-A) and Pd(TPPP-A), were prepared in high yields. These compounds were characterized using spectroscopic methods. Single-crystal X-ray diffraction analysis of Pd(TPPP-A) reveals that the complex forms a 3D hydrogen-bonded organic framework (HOF) in the solid state. Both H2(TPPP-A) and Pd(TPPP-A) were found to catalyze the photooxidation of sulfides by molecular oxygen in the acetonitrile-water mixture (1 : 1 v/v), while only Pd(TPPP-A) resulted in selective production of sulfoxides. The complex Pd(TPPP-A) was easily recovered through extraction in the aqueous phase and successfully reused in five consecutive cycles of the sulfoxidation reaction.

Exceptionally Stable And Super-Efficient Electrocatalysts Derived From Semiconducting Metal Phosphonate Frameworks

Two new isostructural semiconducting metal-phosphonate frameworks are reported. Co2 [1,4-NDPA] and Zn2 [1,4-NDPA] (1,4-NDPA4- is 1,4-naphthalenediphosphonate) have optical bandgaps of 1.7 eV and 2.5 eV, respectively. The electrocatalyst derived from Co2 [1,4-NPDA] as a precatalyst generated a low overpotential of 374 mV in the oxygen evolution reaction (OER) with a Tafel slope of 43 mV dec-1 at a current density of 10 mA cm-2 in alkaline electrolyte (1 mol L-1 KOH), which is indicative of remarkably superior reaction kinetics. Benchmarking of the OER of Co2 [1,4-NPDA] material as a precatalyst coupled with nickel foam (NF) showed exceptional long-term stability at a current density of 50 mA cm-2 for water splitting compared to the state-of-the-art Pt/C/RuO2 @NF after 30 h in 1 mol L-1 KOH. In order to further understand the OER mechanism, the transformation of Co2 [1,4-NPDA] into its electrocatalytically active species was investigated.

Synthesis and Self-Assembly of β-Octa[(4-Diethoxyphosphoryl)phenyl]porphyrins

The β-substituted porphyrinoids commonly used to form functional assembled systems in nature yet are still scarcely used in material chemistry probably due to the laborious synthesis of these compounds. In this work, β-octa[(4-diethoxyphosphoryl)phenyl]porphyrin (2HOPPP) and its metal (Zn(II), Cd(II), Cu(II), and Ni(II)) complexes were prepared in good yields. These highly soluble chromophores were characterized in solution using spectroscopic (NMR, UV-vis, fluorescence), electrochemical, and spectroelectrochemical methods. Attachment of the electron-deficient residue (ArP(O)(OEt)₂) to the porphyrin macrocycle leads to easier reductions and harder oxidations of the macrocycle for all complexes studied as compared to corresponding meso-tetra[4-(diethoxyphosphoryl)phenyl]porphyrin derivatives reported previously. We demonstrated that the strong electron-deficient character of the MOPPP porphyrins results principally from the increase in the number of electron-withdrawing groups at the periphery of the tetrapyrrolic macrocycle. Electron-deficient porphyrins are highly required in supramolecular and material chemistry in part due to their ability to form supramolecular assemblies via the coordination of axial ligands to the central metal atom. According to single-crystal X-ray data, ZnOPPP forms in the crystalline phase dimers in which each of the two tetrapyrrolic macrocycles is connected through an unusual combination of hydrogen bonding of two phosphoryl groups and the water molecules axially coordinated to the zinc atom of the partner molecule. The involvement of water molecules in porphyrin binding allows for an increase of distance between two porphyrin mean N₄ planes, up to 4.478 Å. The offset of phosphoryl groups attached to the macrocycle through a 1,4-phenylene spacer withdraws the whole porphyrin macrocycle of one molecule from spatial overlap with the macrocycle of a partner molecule and increases the Zn-Zn distance up to 10.372 Å. This still unknown type of porphyrin dimers allows one to get deeper insights into the organization of naturally occurring tetrapyrrolic macrocycles. ZnOPPP also forms a labile dimeric complex in 5.3 × 10^-7-5.8 × 10^-5 M chloroform solutions. In contrast, other complexes prepared in this work exist as monomeric species under these experimental conditions. The self-association constant of ZnOPPP has been determined by electronic absorption spectroscopy.

Synthesis and Structure Evolution in Metal Carbazole Diphosphonates Followed by Electron Diffraction

To access porous metal phosphonates, a new V-shaped, rigid, and sterically demanding diphosphonic acid, namely 3,6-diphosphono-9H-carbazole (H₄L), was designed and employed in a high-throughput investigation. Screening of different metal salts and subsequent optimization studies resulted in the isolation of two porous metal phosphonates [Cu₂(H₂O)₂(L)]·2H₂O (CAU-37) and [Zn_6.75(H₂O)_1.5(HL)_2.5(L)_1.5]·8H₂O (CAU-57). Structure determination was accomplished by electron diffraction and the dehydration behavior of CAU-37 was followed in situ. A rare case of intralayer water de-/adsorption in CAU-37 was found which leads to a cell volume change of 11.9%. Rod-shaped inorganic building units (IBUs) are connected to layers and structural flexibility is due to "accordion-like" structural changes within the layers. In contrast, in CAU-57 a layered IBU is found, which usually results in the formation of dense structures. Due to the shape and rigidity of the linker, the interconnection of the IBUs results in the formation of pores. Water sorption measurements in combination with powder X-ray diffraction data confirmed the reversibility under structural retention.

Tuning Structural and Optical Properties of Porphyrin-based Hydrogen-Bonded Organic Frameworks by Metal Insertion

Herein, a simple way of tuning the optical and structural properties of porphyrin-based hydrogen-bonded organic frameworks (HOFs) is reported. By inserting transition metal ions into the porphyrin cores of GTUB-5 (p-H₈ -TPPA (5,10,15,20-Tetrakis[p-phenylphosphonic acid] HOF), the authors show that it is possible to generate HOFs with different band gaps, photoluminescence (PL) life times, and textural properties. The band gaps of the resulting HOFs (viz., Cu-, Ni-, Pd-, and Zn-GTUB-5) are measured by diffuse reflectance and PL spectroscopy, as well as calculated via DFT, and the PL lifetimes are measured. Across the series, the band gaps vary over a narrow range from 1.37 to 1.62 eV, while the PL lifetimes vary over a wide range from 2.3 to 83 ns. These differences ultimately arise from metal-induced structural changes, viz., changes in the metal-to-nitrogen distances, number of hydrogen bonds, and pore volumes. DFT reveals that the band gaps of Cu-, Zn-, and Pd- GTUB-5 are governed by highest occupied/lowest unoccupied crystal orbitals (HOCO/LUCO) composed of π- orbitals on the porphyrin linkers, while that of Ni-GTUB-5 is governed by a HOCO and LUCO composed of Ni dorbitals. Overall, our findings show that metal-insertion can be used to optimize HOFs for optoelectronics and small-molecule capture applications.

Photoresponsive proton conduction in Zr-based metal-organic frameworks using the photothermal effect

A highly stable and porous MOF [Zr₂(H₄TPPP)(OH/F)₂]·xH₂O (1) containing a metal-free porphyrin-phosphonate ligand is reported. It shows high proton conductivity of 1.2 × 10^-3 S·cm^-1 at 25 °C and 95% RH, a photothermal effect over a wide spectral range from UV-vis to NIR, and photo-enhanced and switchable proton conductivity.

New isoreticular phosphonate MOFs based on a tetratopic linker

The tetratopic linker 1,1,2,2-tetrakis(4-phosphonophenyl)ethylene (H₈TPPE) was used to synthesize the three new porous metal-organic frameworks of composition [M₂(H₂O)₂(H₂TPPE)]·xH₂O (M = Al³⁺, Ga³⁺, Fe³⁺), denoted as M-CAU-53 under hydrothermal reaction conditions, using the corresponding metal nitrates as starting materials. The crystal structures of the compounds were determined ab initio from powder X-ray diffraction data, revealing small structural differences. Proton conductivity measurements were carried out, indicating different conductivity mechanisms. The differences in proton conductivity could be linked to the individual structures. In addition, a thorough characterization via thermogravimetry, elemental analysis, IR-spectroscopy as well as N₂- and H₂O-sorption is given.

Nanoporous Metal Phosphonate Hybrid Materials as a Novel Platform for Emerging Applications: A Critical Review

Nanoporous metal phosphonates are propelling the rapid development of emerging energy storage, catalysis, environmental intervention, and biology, the performances of which touch many fundamental aspects of portable electronics, convenient transportation, and sustainable energy conversion systems. Recent years have witnessed tremendous research breakthroughs in these fields in terms of the fascinating pore properties, the structural periodicity, and versatile skeletons of porous metal phosphonates. This review presents recent milestones of porous metal phosphonate research, from the diversified synthesis strategies for controllable pore structures, to several important applications including adsorption and separation, energy conversion and storage, heterogeneous catalysis, membrane engineering, and biomaterials. Highlights of porous structure design for metal phosphonates are described throughout the review and the current challenges and perspectives for future research in this field are discussed at the end. The aim is to provide some guidance for the rational preparation of porous metal phosphonate materials and promote further applications to meet the urgent demands in emerging applications.

Porphyrin and phthalocyanine-based metal organic frameworks beyond metal-carboxylates

Given the ubiquitous role of porphyrins in natural systems, these molecules and related derivatives such as phthalocyanines are fascinating building units to achieve functional porous materials. Porphyrin-based MOFs have been developed over the past three decades, yet chemically robust frameworks, necessary for applications, have been achieved much more recently and this field is expanding. This progress is partially driven by the development of porphyrins and phthalocyanines bearing alternative coordinating groups (phosphonate, azolates, phenolates…) that allowed moving the related MOFs beyond metal-carboxylates and achieving new topologies and properties. In this perspective article we first give a brief outline of the synthetic pathways towards simple porphyrins and phthalocyanines bearing these complexing groups. The related MOF compounds are then described; their structural and textural properties are discussed, as well as their stability and physical properties. An overview of the resulting nets and topologies is proposed, showing both the similarities with metal-carboxylate phases and the peculiarities related to the alternative coordinating groups. Eventually, the opportunities offered by this recent research topic, in terms of both synthesis pathways and modulation of pore size and shape, stability and physical properties, are discussed.

Proton conductivity as a function of the metal center in porphyrinylphosphonate-based MOFs

The rational design of metal-organic frameworks (MOFs) is highly important for the development of new proton conductors. Porphyrinylphosphonate-based MOFs, providing the directed tuning of physical and chemical properties of materials through the modification of a macrocycle, are potentially high-conducting systems. In this work the synthesis and characterization of novel anionic Zn-containing MOF based on palladium(ii) meso-tetrakis(3-(phosphonatophenyl))porphyrinate, IPCE-2Pd, are reported. Moreover, the proton-conductive properties and structures of two anionic Zn-containing MOFs based on previously described nickel(ii) and novel palladium(ii) porphyrinylphosphonates, IPCE-2M (M = Ni(ii) or Pd(ii)), are compared in details. The high proton conductivity of 1.0 × 10-2 S cm-1 at 75 °C and 95% relative humidity (RH) is revealed for IPCE-2Ni, while IPCE-2Pd exhibits higher hydrolytic and thermal stability of the material (up to 420 °C) simultaneously maintaining a comparable value of conductivity (8.11 × 10-3 S cm-1 at 95 °C and 95% RH). The nature of the porphyrin metal center is responsible for the features of crystal structure of materials, obtained under identical reaction conditions. The structures of IPCE-2Pd and its dehydrated derivative IPCE-2Pd-HT are determined from the synchrotron powder diffraction data. The presence of phosphonic groups in compared materials IPCE-2M affords a high concentration of proton carriers that together with the sorption of water molecules leads to a high proton conductivity.

A Tetratopic Phosphonic Acid for the Synthesis of Permanently Porous MOFs: Reactor Size-Dependent Product Formation and Crystal Structure Elucidation via Three-Dimensional Electron Diffraction

Following the strategy of installing porosity in coordination polymers predefined by linker geometry, we employed the new tetratopic linker molecule 1,1,2,2-tetrakis[4-phosphonophenyl]ethylene (H₈TPPE) for the synthesis of new porous metal phosphonates. A high-throughput study was carried out using Ni²⁺ and Co²⁺ as metal ions, and a very strong influence of the reactor size on the product formation is observed while maintaining the same reaction parameters. Using small autoclaves (V = 250 μL), single crystals of isostructural mononuclear complexes of the composition [Ni(H₃DPBP)₂(H₂O)₄] (1) and [Co(H₃DPBP)₂(H₂O)₄] (2) are formed. They contain the linker molecule H₄DPBP (4,4'-diphosphonobenzophenone), which is formed in situ by oxidation of H₈TPPE. Using autoclaves with a volume of V = 2 mL, two new 3D metal-organic frameworks (MOFs) of composition [Ni₂(H₄TPPE)(H₂O)₆]·4H₂O (CAU-46) and [Co₂(H₄TPPE)(H₂O)₄]·3H₂O (CAU-47) were isolated in bulk quantities, and their crystal structures were determined from three-dimensional electron diffraction (3D ED) and powder X-ray diffraction data. Using even larger autoclaves (V = 30 mL), another 3D MOF of the composition [Co₂(H₄TPPE)]·6H₂O (Co-CAU-48) was obtained, and a structure model was established via 3D ED measurements. Remarkably, the isostructural compound [Ni₂(H₄TPPE)]·9H₂O (Ni-CAU-48) is only obtained indirectly, i.e., via thermal activation of CAU-46. As the chosen linker geometry leads to the formation of MOFs, topological analyses were carried out, highlighting the different connectivities observed in the three frameworks. Porosity of the compounds was proven via water sorption experiments, resulting in uptakes of 126 mg/g (CAU-46), 105 mg/g (CAU-47), 210 mg/g (Ni-CAU-48), and 109 mg/g (Co-CAU-48).

Semiconductive microporous hydrogen-bonded organophosphonic acid frameworks

Herein, we report a semiconductive, proton-conductive, microporous hydrogen-bonded organic framework (HOF) derived from phenylphosphonic acid and 5,10,15,20-tetrakis[p-phenylphosphonic acid] porphyrin (GTUB5). The structure of GTUB5 was characterized using single crystal X-ray diffraction. A narrow band gap of 1.56 eV was extracted from a UV-Vis spectrum of pure GTUB5 crystals, in excellent agreement with the 1.65 eV band gap obtained from DFT calculations. The same band gap was also measured for GTUB5 in DMSO. The proton conductivity of GTUB5 was measured to be 3.00 × 10-6 S cm-1 at 75 °C and 75% relative humidity. The surface area was estimated to be 422 m2 g-1 from grand canonical Monte Carlo simulations. XRD showed that GTUB5 is thermally stable under relative humidities of up to 90% at 90 °C. These findings pave the way for a new family of organic, microporous, and semiconducting materials with high surface areas and high thermal stabilities.

Polar layered coordination polymers incorporating triazacyclononane-triphosphonate metalloligands

Reactions of metalloligands M^III(notpH₃) (M = Fe, Co and notpH₆ = 1,4,7-triazacyclononane-1,4,7-triyl-tris(methylenephosphonic acid)) with Zn(OAc)₂ under hydrothermal conditions resulted in new metal phosphonates Zn₂Fe(notp)Cl(H₂O) (1) and ZnCo(notpH)(H₂O)·2H₂O (2). They crystallize in polar space groups P6₃ (for 1) and Pca2₁ (for 2), respectively, and exhibit layer structures in which the inorganic layers are separated by the organic groups of the notp ligands. However, the layer topologies of the two compounds are quite different. In 1, the layer contains 6-membered rings composed of one {FeN₃O₃} octahedron, one {Zn1O₃Cl}, one {Zn2O₄} and three {PO₃C} tetrahedra via corner-sharing connections, while in 2, the layer contains 10-membered rings composed of two {CoO₃N₃} octahedra, three {ZnO₄} and five {PO₃C} tetrahedra via vertex-sharing connections. Dielectric measurements on single crystals of 2 confirmed the presence of high dielectric anisotropy. Proton conductivity measurements revealed that the proton conduction is more favourable in 2 due to the presence of a continuous hydrogen bond network in this compound.

Metalloporphyrinic metal-organic frameworks: Controlled synthesis for catalytic applications in environmental and biological media

Recently, as a new sub-family of porous coordination polymers (PCPs), porphyrinic-MOFs (Porph-MOFs) with biomimetic features have been developed using porphyrin macrocycles as ligands and/or pillared linkers. The control over the coordination of the porphyrin ligand and its derivatives however remains a challenge for engineering new tunable Porph-MOF frameworks by self-assembly methods. The key challenges exist in the following respects: (i) collapse of the large open pores of Porph-MOFs during synthesis, (ii) deactivation of unsaturated metal-sites (UMCs) by axial coordination, and (iii) the tendency of both coordinated moieties (at peripheral meso- and beta-carbon sites) and the N₄-pyridine core to coordinate with metal cations. In this respect, this review covers the advances in the design of Porph-MOFs relative to their counterpart covalent organic frameworks (Porph-COFs). The potential utility of custom-designed porphyrin/metalloporphyrins ligands is highlighted. Synthesis strategies of Porph-MOFs are also illustrated with modular design of hybrid guest@host composites (either Porph@MOFs or guest@Porph-MOFs) with exceptional topologies and stability. This review summarizes the synergistic benefits of coordinated porphyrin ligands and functional guest molecules in Porph-MOF composites for enhanced catalytic performance in various redox applications. This review shed lights on the engineering of new tunable hetero-metals open active sites within (metallo)porphyrin-MOFs as out-of-the-box platforms for enhanced catalytic processes in chemical and biological media.

Investigating the effect of positional isomerism on the assembly of zirconium phosphonates based on tritopic linkers

Combination of the novel linker 2,4,6-tris[3-(phosphonomethyl)phenyl]-1,3,5-triazine and Zr(iv) afforded a layered compound that lacks extended inorganic connectivity and displays good proton conductivity.

Metal phosphonates incorporating metalloligands: assembly, structures and properties

This feature article summarizes the current status of metal–metalloligand phosphonates including the synthetic strategies, crystal structures and properties. Future challenges in this field are discussed.

Synthesis and characterization of two bifunctional pyrazole-phosphonic acid ligands

The bifunctional compounds 3,5-dimethyl-4-(4-phosphonophenyl)-1H-pyrazole 1 and 4-(4-phosphonophenyl)-1H-pyrazole 2 were synthesized via Suzuki-Miyaura coupling, starting from a Boc-protected pyrazolylboronic acid ester and the iodoarylphosphonate. The target compounds were isolated after acidic hydrolysis in the form of the hydrochloride salts 1 · HCl and 2 · HCl · H2O with a yield of 81% and 86%, respectively. Pd(dppf)Cl2 was found to be superior to Pd(PPh3)4 as a catalyst; dry 1,4-dioxane as a solvent, Cs2CO3 as a base, and no co-ligands were the best found conditions. The alternative routes through iodoarylphosphonate of iodoarylpyrazole, with the crucial steps based on the copper-catalyzed coupling with acetylacetone or the Arbuzov reaction were proven inefficient. The structures of the isolated hydrochloride salts 1 · HCl and 2 · HCl · H2O feature hydrogen-bonded networks involving the chloride anions.

Alkali Phosphonate Metal-Organic Frameworks

A new family of porous metal-organic frameworks (MOFs), namely alkali phosphonate MOFs, is reported. [Na₂ Cu(H₄ TPPA)]⋅(NH₂ (CH₃ )₂ )₂ (GTUB-1) was synthesized using the tetratopic 5,10,15,20-tetrakis[p-phenylphosphonic acid] porphyrin (H₈ -TPPA) linker with planar X-shaped geometrical core. GTUB-1 is composed of rectangular void channels with BET surface area of 697 m²  g^-1 . GTUB-1 exhibits exceptional thermal stability. The toxicity analysis of the (H₈ -TPPA) linker indicates that it is well tolerated by an intestinal cell line, suggesting its suitability for creating phosphonate MOFs for biological applications.

New Directions in Metal Phosphonate and Phosphinate Chemistry

In September 2018, the First European Workshop on Metal Phosphonates Chemistry brought together some prominent researchers in the field of metal phosphonates and phosphinates with the aim of discussing past and current research efforts and identifying future directions. The scope of this perspective article is to provide a critical overview of the topics discussed during the workshop, which are divided into two main areas: synthesis and characterisation, and applications. In terms of synthetic methods, there has been a push towards cleaner and more efficient approaches. This has led to the introduction of high-throughput synthesis and mechanochemical synthesis. The recent success of metal–organic frameworks has also promoted renewed interest in the synthesis of porous metal phosphonates and phosphinates. Regarding characterisation, the main advances are the development of electron diffraction as a tool for crystal structure determination and the deployment of in situ characterisation techniques, which have allowed for a better understanding of reaction pathways. In terms of applications, metal phosphonates have been found to be suitable materials for several purposes: they have been employed as heterogeneous catalysts for the synthesis of fine chemicals, as solid sorbents for gas separation, notably CO2 capture, as materials for electrochemical devices, such as fuel cells and rechargeable batteries, and as matrices for drug delivery.

Synthesis and Characterization of a Rare Transition-Metal Oxothiostannate and Investigation of Its Photocatalytic Properties

The new transition-metal oxothiostannate [Ni(cyclen)(H₂O)₂]₄[Sn₁₀S₂₀O₄]·∼13H₂O (1) was prepared under hydrothermal conditions using Na₄SnS₄·14H₂O as the precursor in the presence of [Ni(cyclen)(H₂O)₂](ClO₄)₂·H₂O. Compound 1 comprises the [Sn₁₀S₂₀O₄]^8- anion constructed by the T3-type supertetrahedron [Sn₁₀S₂₀] and the [Sn₁₀O₄] anti-T2 cluster. Channels host the H₂O molecules, and the sample can be reversibly dehydrated and rehydrated without significantly affecting the crystallinity of the material. ¹¹⁹Sn NMR spectroscopy of an aqueous solution of Na₄SnS₄·14H₂O evidences that between 25 and 120 °C only [SnS₄]^4- and [Sn₂S₆]^4- anions are present. In further experiments, hints were found that the formation of tin oxosulfide ions depends on the Ni²⁺-centered complexes. Compound 1 exhibits promising photocatalytic properties for the visible-light-driven hydrogen evolution reaction, with 18.7 mmol·g^-1 H₂ being evolved after 3 h.

A cobalt arylphosphonate MOF – superior stability, sorption and magnetism

We report a novel metal organic framework (MOF) based on a cobalt arylphosphonate, namely, [Co₂(H₄-MTPPA)]·3NMP·H₂O (1·3NMP·H₂O), which was prepared solvothermically from the tetrahedral linker tetraphenylmethane tetrakis-4-phosphonic acid (H₈-MTPPA) and CoSO₄·7H₂O in N-methyl-2-pyrrolidone (NMP).

Zinc-diphosphonates with extended dipyridine units: synthesis, structures, in situ reactions, and photochromism

We report two zinc-diphosphonates bearing extended dipyridine units. In situ reactions and photochromism are observable in the title compounds.

High-Throughput Synthesis of Pillared-Layered Magnesium Tetraphosphonate Coordination Polymers: Framework Interconversions and Proton Conductivity Studies

Novel pillared-layered framework materials were synthesized by high-throughput or microwave-assisted methodology that contain Mg2+ and the zwitterionic linker HDTMP (hexamethylenediamine-N,N,N′,N′-tetrakis(methylenephosphonic acid)). Three compounds were structurally characterized by X-ray powder diffraction. In the compound {Mg[(HO3PCH2)2N(CH2)6N(CH2PO3H2)2]·(H2O)}n(1), obtained at 140 °C by hydrothermal or microwave-assisted reaction, the layers are built by isolated Mg2+ octahedra coordinated by oxygen atoms from six different zwitterionic HDTMP ligands. Each amino-bis(methylenephosphonate) moiety links three Mg2+ ions, bridging two of them through one phosphonate group and connecting the third polyhedron in a monodentate fashion. In Compound 2, {Mg[(HO3PCH2)2N(CH2)6N(CH2PO3H2)2]}n, hydrothermally synthesized at 180 °C, the layers are composed of bidentate amino-bis(methylenephosphonate) moieties connected to three Mg2+ ions, with one of the phosphonate groups acting as a bridging ligand. Various subtle structural changes are noted for the other two compounds. Thermodiffraction of 1 reveals that a crystalline-to-crystalline phase transformation occurs concomitantly with its dehydration, leading to a new anhydrous phase, namely, {Mg[(HO3PCH2)2N(CH2)6N(CH2PO3H2)2]}n(1deh). This process is fully reversible upon equilibrating the solid at room temperature. The reported compounds can adsorb ammonia and CO2. Compound 1 exhibits a moderate proton conductivity, ~1.5 × 10−5 S·cm−1 at 80 °C and 95% RH, that increases a half order of magnitude after experiencing a complete dehydration/rehydration process, 1→1deh→1.

Multiparameter High-Throughput and in Situ X-ray Diffraction Study of Six New Bismuth Sulfonatocarboxylates: Discovery, Phase Transformation, and Reaction Trends

With the employment of high-throughput methods, the system Bi³⁺/4,8-disulfonyl-2,6-naphthalenedicarboxylic acid (H₄DSNDC)/H₂O/additive (HNO₃ or NaOH) was systematically investigated under hydrothermal reaction conditions. The influence of the molar ratio of the starting materials, pH, and reaction temperature and time was investigated in more than 500 reactions. The product formation is highly sensitive toward small changes of the synthesis parameters, but six new bismuth sulfonatocarboxylates were reproducibly obtained starting from clear solutions of the reactants. All compounds were structurally characterized from single-crystal X-ray diffraction data. Fully deprotonated linker ions are found in [Bi₆O₆(OH)₂(H₂O)₄(DSNDC)] (1), [Bi₂(OH)₂(DSNDC)] (2), [Bi₈O₇(OH)₂(H₂O)₂(DSNDC)₂] (3), and [Bi₇O₅(OH)₃(H₂O)₄(DSNDC)₂]·4H₂O (4), while the presence of larger amounts of acid or short reaction times leads to compounds with noncoordinating -COOH groups, [Bi₂(OH)₂(H₂O)₂(DSNDC)(H₂DSNDC)] (5) and [Bi₆O₄(OH)₄(H₂O)₁₂(H₂DSNDC)₃]· xH₂O (6), respectively. The inorganic building units (IBUs) in all six structures differ substantially from each other; the IBUs found in 2 ({Bi₂(OH)₂}), 5 (BiO₈ polyhedron), and 6 ({Bi₆O₄(OH)₄} cluster) have been reported in the literature, while new IBUs are observed for 1 (chains of composition {Bi₃O₃(OH)}_∞), 3 ({Bi₁₆O₁₄(OH)₄} cluster), and 4 ({Bi₇O₅(OH)₃} cluster). Systematic variation of the reaction temperature and time indicated their distinct influence on product formation. Hence, in situ powder X-ray diffraction measurements at Deutsches Elektronen-Synchrotron, Hamburg, Germany, employing synchrotron radiation were carried out. In all studied in situ reactions, compound 6 is first observed and subsequently transformed to 1, 2, 4, and 5, depending on the reaction time and temperature as well as concentration of the starting materials.

Highly stable and porous porphyrin-based zirconium and hafnium phosphonates - electron crystallography as an important tool for structure elucidation

The Ni-metallated porphyrin-based tetraphosphonic acid (Ni-tetra(4-phosphonophenyl)porphyrin, Ni-H8TPPP) was used for the synthesis of highly porous metal phosphonates containing the tetravalent cations Zr4+ and Hf4+. The compounds were thoroughly characterized regarding their sorption properties towards N2 and H2O as well as thermal and chemical stability. During the synthesis optimization the reaction time could be substantially decreased under stirring from 24 to 3 h in glass vials. M-CAU-30, [M2(Ni-H2TPPP)(OH/F)2]·H2O (M = Zr, Hf) shows exceptionally high specific surface areas for metal phosphonates of aBET = 1070 and 1030 m2 g-1 for Zr- and Hf-CAU-30, respectively, which are very close/correspond to the theoretical values of 1180 and 1030 m2 g-1. CAU-30 is always obtained as mixtures with one mol ZrO2/HfO2 per formula unit as proven by TEM, electron diffraction, TG and elemental analysis. Hence experimentally derived specific surface areas are 970 and 910 m2 g-1, respectively. M-CAU-30 is chemically stable in the pH range 0 to 12 in HCl/NaOH and thermally up to 420 °C in air as determined by variable-temperature powder X-ray diffraction (VT-PXRD). The crystal structure of M-CAU-30 was determined by combining electron diffraction tomography for structure solution and powder X-ray diffraction data for the structure refinement. The crystal structure consists of chains of corner sharing MO6 octahedra interconnected by the partly deprotonated linker molecules Ni-H2TPPP6-. Thus 1D channels with pore diameters of 1.3 × 2.0 nm are formed. The redox activity of Zr-CAU-30 was investigated by cyclic voltammetry resulting in a reversible redox process at a half-wave potential of E1/2 = -0.649 V.

Bifunctional Porphyrin-Based Nano-Metal-Organic Frameworks: Catalytic and Chemosensing Studies

The use of 5,10,15,20-tetrakis( p-phenylphosphonic acid)porphyrin (H₁₀TPPA) as a linker in the preparation of porphyrin-based metal-organic frameworks (Por-MOFs) through coordination to lanthanides cations is reported. The resulting unprecedented materials, formulated as [M(H₉TPPA)(H₂O) _x]Cl₂· yH₂O [ x + y = 7; M³⁺ = La³⁺ (1), Yb³⁺ (2), and Y³⁺ (3)], prepared using hydrothermal synthesis, were extensively characterized in the solid-state, for both their structure and thermal robustness, using a myriad of solid-state advanced techniques. Materials were evaluated as heterogeneous catalysts in the oxidation of thioanisole by H₂O₂ and as chemosensors for detection of nitroaromatic compounds (NACs). Nano-Por-MOFs 1-3 proved to be effective as heterogeneous catalysts in the sulfoxidation of thioanisole, with Por-MOF 1 exhibiting the best catalytic performance with a conversion of thioanisole of 89% in the first cycle and with a high selectivity for the sulfoxide derivative (90%). The catalyst maintained its activity roughly constant in three consecutive runs. Por-MOFs 1-3 can be employed as chemosensors because of a measured fluorescence quenching up to 70% for nitrobenzene, 1,4-dinitrobenzene, 4-nitrophenol, and phenol, with 2,4,6-trinitrophenol exhibiting a peculiar fluorescence profile.