Synthesis and Photo/Radiation Chemical Characterization of a New Redox-Stable Pyridine-Triazole Ligand

Photocatalysis using transition-metal complexes is widely considered the future of effective and affordable clean-air technology. In particular, redox-stable, easily accessible ligands are decisive. Here, we report a straightforward and facile synthesis of a new highly stable 2,6-bis(triazolyl)pyridine ligand, containing a nitrile moiety as a masked anchoring group, using copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) click reaction. The reported structure mimics the binding motif of uneasy to synthesize ligands. Pulse radiolysis under oxidizing and reducing conditions provided evidence for the high stability of the formed radical cation and radical anion 2,6-di(1,2,3-triazol-1-yl)-pyridine compound, thus indicating the feasibility of utilizing this as a ligand for redox active metal complexes and the sensitization of metal-oxide semiconductors (e. g., TiO2 nanoparticles or nanotubes).

Generating water/MeOH-soluble and luminescent polymers by grafting 2,6-bis(1,2,3-triazol-4-yl)pyridine (btp) ligands onto a poly(ethylene-alt-maleic anhydride) polymer and cross-linking with terbium(III)

The synthesis of two new polymers made from P(E-alt-MA) (poly(ethylene-alt-maleic anhydride) and possessing 2,6-bis(1,2,3-triazol-4-yl)pyridine (btp) ligand side chains in 3 and 6 mol%, respectively (P1 and P2, respectively) is described. These polymers were shown to be soluble in MeOH solution and, in the case of P1, also in water, while P2 needed prolonged heating to enable water dissolution. Btp ligands are known for coordinating both d- and f-metal ions and so, herein, we demonstrate by using both UV-Vis absorption, fluorescence emission, as well as time-gated phosphorescence spectroscopies, that both P1 and P2 can bind to Tb(III) ions to give rise to luminescent polymers. From the analysis of the titration data, which demonstrated large changes in the emission intensity properties of the polymer upon Tb(III) binding (ground state changes were also clearly observed, with the absorption being red-shifted at lower energy), we show that the dominant stoichiometry in solution is 1 : 2 (M : L; Tb(III) : btp ratio) which implies that two btp ligands from the polymer background are able to crosslink through lanthanide coordination and that the backbone of the polymer is very likely to aid in coordinating the ions.

Synthesis and Antiparasitic Activity of New Trithiolato-Bridged Dinuclear Ruthenium(II)-arene-carbohydrate Conjugates

Eight novel carbohydrate-tethered trithiolato dinuclear ruthenium(II)-arene complexes were synthesized using CuAAC ‘click’ (Cu(I)-catalyzed azide-alkyne cycloaddition) reactions, and there in vitro activity against transgenic T. gondii tachyzoites constitutively expressing β-galactosidase (T. gondii β-gal) and in non-infected human foreskin fibroblasts, HFF, was determined at 0.1 and 1 µM. When evaluated at 1 µM, seven diruthenium-carbohydrate conjugates strongly impaired parasite proliferation by >90%, while HFF viability was retained at 50% or more, and they were further subjected to the half-maximal inhibitory concentration (IC50) measurement on T. gondii β-gal. Results revealed that the biological activity of the hybrids was influenced both by the nature of the carbohydrate (glucose vs. galactose) appended on ruthenium complex and the type/length of the linker between the two units. 23 and 26, two galactose-based diruthenium conjugates, exhibited low IC50 values and reduced effect on HFF viability when applied at 2.5 µM (23: IC50 = 0.032 µM/HFF viability 92% and 26: IC50 = 0.153 µM/HFF viability 97%). Remarkably, compounds 23 and 26 performed significantly better than the corresponding carbohydrate non-modified diruthenium complexes, showing that this type of conjugates are a promising approach for obtaining new antiparasitic compounds with reduced toxicity.

Fluorinated Click-Derived Tripodal Ligands Drive Spin Crossover in both Iron(II) and Cobalt(II) Complexes

Control of the spin state of metal complexes is important because it leads to a precise control over the physical properties and the chemical reactivity of the metal complexes. Currently,...

Spin-state control of cobalt(II) and iron(II) complexes with click-derived tripodal ligands through non-covalent and fluorine-specific interactions

The fine-tuning of intermolecular or intramolecular non-covalent interactions (NCIs) and thus the precise synthesis of metal complexes in which the spin states can be controlled by NCIs remains challenging, even though several such complexes have been intensively studied. In this regard, we present mononuclear cobalt(II) and iron(II) complexes with "click"-derived tripodal ligands that contain fluorinated benzyl substituents in the secondary coordination sphere. The complexes were co-crystallized with different solvent molecules to decipher the effect of the crystallized solvents on NCIs, and on the spin state of the metal ion. Additionally, the fluorine-specific interactions in the secondary coordination sphere were examined. We present a first structure-property correlation between the nature of interaction of the (per)fluorinated aromatic substituents on the ligand periphery, and the spin state of the metal complexes. In particular, the TF₅TA containing ligand show interesting stacking motifs depending on the used solvent, and these interactions have an influence on the spin state of the cobalt(II) complexes. Furthermore, the iron(II) complex thereof, Fe(TF₅TA)₂(BF₄)₂·2EtOH displays spin crossover (SCO).

Macrocyclic vs. [2]catenane btp structures: influence of (aryl) substitution on the self templation of btp ligands in macrocyclic synthesis

The synthesis of four 2,6-bis(1,2,3-triazol-4-yl)pyridine (btp) olefin based ligands 3, 4, 11 and 12 is described and their attempted use to form mechanically interlocked molecules using ring closing metatheses (RCM) reactions. The btp ligands were modified in two ways, in 3 and 4 the aryl substitution pattern was changed from 4^th position to 3^rd position and in the case of 11 and 12, the arms were replaced with aliphatic chains. Our study demonstrates that for all four ligands, the RCM reactions only result in the formation of macrocyclic structures, which in three of the cases, were structurally characterised in both solution (using NMR and HRMS) and in the solid-state using X-ray crystallography. NMR studies were also carried out to investigate if these ligands could preorganise in solution via hydrogen bonding interactions. This study provides a handle of how such precursor substitution can be used to direct the formation of macrocycles or mechanically interlocked structures.

Modified pyridine-triazole and 2,2'-bipyrimidine ligands generating robust titanium complexes constructed around a TiO4N2 core

The synthesis and characterisation of novel chelate nitrogen ligands with phasmidic tails (pyridine-triazole ligand 1b; 2,2'-bipyrimidine ligands 2b and 3b) as well as their titanium(IV) coordination complexes are reported. The analogous ligands 1a, 2a and 3a with methoxy substituents instead of the tails were also synthesized, together with titanium complexes that could be crystallographically characterised. A good agreement is noticed between analytical data of the complexes in solution (NMR) and in the solid state (X-ray diffraction). The complexes are overall robust on phases like alumina or silica, so that they could be characterised by TLC and sometimes chromatographied. Supramolecular architectures were generated from an equimolar solution of titanium(IV) isopropoxide, ligand 1a and a polyphenol ligand 5-H₄, leading to a double-stranded helicate characterised by MS, NMR and crystallography, which was then converted into a trinuclear complex as shown by MS and NMR DOSY data. The liquid-crystalline behaviour of the ligands 1b, 2b and 3b incorporating the long alkyl tails and that of the complexes derived from these ligands have been investigated.

Can 2-Pyridyl-1,2,3-triazole "Click" Ligands be Used to Develop Cu(I)/Cu(II) Molecular Switches?

Molecular switching processes are important in a range of areas including the development of molecular machines. While there are numerous organic switching systems available, there are far less examples that exploit inorganic materials. The most common inorganic switching system remains the copper(I)/copper(II) switch developed by Sauvage and co-workers over 20 years ago. Herein, we examine if bidentate 2-(1-benzyl-1H-1,2,3-triazol-4-yl)pyridine (pytri) and tridentate 2,6-bis[(4-phenyl-1H-1,2,3-triazol-1-yl)methyl]pyridine (tripy) moieties can be used to replace the more commonly exploited polypyridyl ligands 2,2'-bypyridine (bpy)/1,10-phenanthroline (phen) and 2,2';6',2″-terpyridine (terpy) in a copper(I)/(II) switching system. Two new ditopic ligands that feature bidentate (pytri, L1 or bpytri, L2) and tridentate tripy metal binding pockets were synthesized and used to generate a family of heteroleptic copper(I) and copper(II) 6,6'-dimesityl-2,2'-bipyridine (diMesbpy) complexes. Additionally, we synthesized a series of model copper(I) and copper(II) diMesbpy complexes. A combination of techniques including nuclear magnetic resonance (NMR) and UV-vis spectroscopies, high-resolution electrospray ionization mass spectrometry, and X-ray crystallography was used to examine the behavior of the compounds. It was found that L1 and L2 formed [(diMesbpy)Cu(L1 or L2)]²⁺ complexes where the copper(II) diMesbpy unit was coordinated exclusively in the tridenate tripy binding site. However, when the ligands (L1 and L2) were complexed with copper(I) diMesbpy units, a complex mixture was obtained. NMR and MS data indicated that a 1:1 stoichiometry of [Cu(diMesbpy)]⁺ and either L1 or L2 generated three complexes in solution, the dimetallic [(diMesbpy)₂Cu₂(L1 or L2)]²⁺ and the monometallic [(diMesbpy)Cu(L1 or L2)]⁺ isomers where the [Cu(diMesbpy)]⁺ unit is coordinated to either the bidentate or tridentate tripy binding sites of the ditopic ligands. The dimetallic [(diMesbpy)₂Cu₂(L1 or L2)](PF₆)₂ complexes were structurally characterized using X-ray crystallography. Both complexes feature a [Cu(diMesbpy)]⁺ coordinated to the bidentate (pytri or bpytri) pocket of the ditopic ligands (L1 or L2), as expected. They also feature a second [Cu(diMesbpy)]⁺ coordinated to the nominally tridentate tripy binding site in a four-coordinate hypodentate κ²-fashion. Competition experiments with model complexes showed that the binding strength of the bidentate pytri is similar to that of the κ²-tripy ligand, leading to the lack of selectivity. The results suggest that the pytri/tripy and bpytri/tripy ligand pairs cannot be used as replacements for the more common bpy/phen-terpy partners due to the lack of selectivity in the copper(I) state.

Structures and Spin States of Iron(II) Complexes of Isomeric 2,6-Di(1,2,3-triazolyl)pyridine Ligands

Iron(II) complex salts of 2,6-di(1,2,3-triazol-1-yl)pyridine (L¹) are unexpectedly unstable in undried solvent. This is explained by the isolation of [Fe(L¹)₄(H₂O)₂][ClO₄]₂ and [Fe(NCS)₂(L¹)₂(H₂O)₂]·L¹, containing L¹ bound as a monodentate ligand rather than in the expected tridentate fashion. These complexes associate into 4⁴ grid structures through O-H···N hydrogen bonding; a solvate of a related 4⁴ coordination framework, catena-[Cu(μ-L¹)₂(H₂O)₂][BF₄]₂, is also presented. The isomeric ligands 2,6-di(1,2,3-triazol-2-yl)pyridine (L²) and 2,6-di(1H-1,2,3-triazol-4-yl)pyridine (L³) bind to iron(II) in a more typical tridentate fashion. Solvates of [Fe(L³)₂][ClO₄]₂ are low-spin and diamagnetic in the solid state and in solution, while [Fe(L²)₂][ClO₄]₂ and [Co(L³)₂][BF₄]₂ are fully high-spin. Treatment of L³ with methyl iodide affords 2,6-di(2-methyl-1,2,3-triazol-4-yl)pyridine (L⁴) and 2-(1-methyl-1,2,3-triazol-4-yl)-6-(2-methyl-1,2,3-triazol-4-yl)pyridine (L⁵). While salts of [Fe(L⁵)₂]²⁺ are low-spin in the solid state, [Fe(L⁴)₂][ClO₄]₂·H₂O is high-spin, and [Fe(L⁴)₂][ClO₄]₂·3MeNO₂ exhibits a hysteretic spin transition to 50% completeness at T_1/2 = 128 K (ΔT_1/2 = 6 K). This transition proceeds via a symmetry-breaking phase transition to an unusual low-temperature phase containing three unique cation sites with high-spin, low-spin, and 1:1 mixed-spin populations. The unusual distribution of the spin states in the low-temperature phase reflects "spin-state frustration" of the mixed-spin cation site by an equal number of high-spin and low-spin nearest neighbors. Gas-phase density functional theory calculations reproduce the spin-state preferences of these and some related complexes. These highlight the interplay between the σ-basicity and π-acidity of the heterocyclic donors in this ligand type, which have opposing influences on the molecular ligand field. The Brønsted basicities of L¹-L³ are very sensitive to the linkage isomerism of their triazolyl donors, which explains why their iron complex spin states show more variation than the better-known iron(II)/2,6-dipyrazolylpyridine system.

A photoresponsive palladium complex of an azopyridyl-triazole ligand: light-controlled solubility drives catalytic activity in the Suzuki coupling reaction

Herein, the design and synthesis of a click-derived Pd-complex merged with a photoswitchable azobenzene unit is presented. While in the trans-form of the switch the complex showed limited solubility, the photogenerated cis-form rendered the molecule soluble in polar solvents. This light-controllable solubility was exploited to affect the catalytic activity in the Suzuki coupling reaction. The effect of the substrate and catalyst concentration and light intensity on the proceeding and outcome of the reaction was studied. Dehalogenation of the aryl iodide starting material was found to be a major side reaction; however, its occurrence was dependent on the applied light intensity.

Triazole-based, optically-pure metallosupramolecules; highly potent and selective anticancer compounds

Functionalised triazole aldehydes are used in the highly selective self-assembly of water-compatible, optically pure, low symmetry Fe(ii)- and Zn(ii)-based metallohelices. Sub-micromolar antiproliferative activity is observed against various cancerous cell lines, accompanied by excellent selectivity versus non-cancerous cells and potential for synergistic combinatorial therapy with cisplatin.

Chelation-Assisted Interrupted Copper(I)-Catalyzed Azide-Alkyne-Azide Domino Reactions: Synthesis of Fully Substituted 5-Triazenyl-1,2,3-triazoles

We describe the synthesis of 1,4-(disubstituted)-5-triazenyl-1,2,3-triazoles through a ligand-free domino copper(I)-catalyzed azide-alkyne-azide process of chelating aryl azides bearing N-P═O, P═O, and SO₃H groups at the ortho position with a wide variety of acetylenes. DFT calculations reveal that Cu-chelation is a crucial factor in the interception of the CuAAC intermediate by the azide. The crystal structure of the catalytic species has been determined by X-ray diffraction.

Copper(ii) and zinc(ii) complexes of mono- and bis-1,2,3-triazole-substituted heterocyclic ligands

Chelating 1,4-disubstituted mono- (8a-8d) and bis-1,2,3-triazole-based (9a-11a) ligands were prepared by regioselective copper(i)-catalysed 1,3-dipolar cycloaddition of terminal alkynes with aromatic azides, together with bioconjugate 13a synthesized by amide coupling of l-phenylalanine methyl ester to 11a. Cu(ii) and Zn(ii) complexes were prepared and single crystal structures were determined for complexes 8aCu, 8dCu, 9cCu and 10cCu, as well as the free ligands 10a and 10c. The in situ prepared Zn(ii) complexes were studied by NMR spectroscopy, while the stoichiometry of the Cu(ii) complexes in solution was determined by UV-Vis titrations and confirmed by the electronic structure DFT calculations at the (SMD)/M05-2X/6-31+G(d)/LanL2DZ+ECP level of theory.

A ferrocene functionalized Schiff base containing Cu(ii) complex: synthesis, characterization and parts-per-million level catalysis for azide alkyne cycloaddition

Atom economy is one of the major factors in developing catalysis chemistry. Using the minimum amount of catalyst to obtain the maximum product yield is of the utmost priority in catalysis, which drives us to use parts-per-million (ppm) levels of catalyst loadings in syntheses. In this context, a new ferrocene functionalized Schiff base and its copper(ii) complex have been synthesized and characterized. This Cu(ii) complex is employed as a catalyst for popular 'click chemistry', where 1,2,3-triazoles are the end product. As low as 5 ppm catalyst loading is enough to produce gram scale product, and highest turnover number (TON) and turnover frequency (TOF) values of 140 000 and 70 000 h^-1 are achieved, respectively. Furthermore, this highly efficient protocol has been successfully applied to the preparation of diverse functionalized materials with pharmaceutical, labelling and supramolecular properties.

The crystal structure of 1-benzyl-4-(2-(phenylethynyl)phenyl)-1H-1,2,3-triazole, C23H17N3

C23H17N3, monoclinic, P21 (no. 4), a = 11.7817(14) Å, b = 5.3165(6) Å, c = 14.1747(16) Å, β = 95.731(2)°, V = 883.43(18) Å3, Z = 2, R gt(F) = 0.0663, wR ref(F 2) = 1567, T = 298(2) K.

Ru(II) coordination compounds of N-N bidentate chelators with 1,2,3 triazole and isoquinoline subunits: Synthesis, spectroscopy and antimicrobial properties

Bidentate chelators 1-(1-benzyl-1,2,3-triazol-4-yl)isoquinoline and 3-(1-benzyl-1,2,3-triazol-4-yl)isoquinoline were prepared from benzyl bromide and trimethylsilylethynylisoquinoline precursors using a tandem deprotection/substitution/CuAAC synthetic approach. Each chelator is capable of forming a stable 3:1 Ru(II) coordination compound, which forms as a geometric isomer mixture. These Ru(II) complexes possess unique MLCT absorbance signatures at 450/472 nm (1-isomer) and 367 nm (3-isomer) relative to their constituent chelating units. Minimum inhibitory concentration values as low as 0.4 μM are observed for Ru(II) complexes against representative Gram-positive bacteria Bacillus subtilis and Staphylococcus epidermidis. Comparing the MIC values of these isoquinoline compounds with analogous 2-(1-benzyl-1,2,3-triazol-4-yl)pyridine compounds shows a 2.5- to 40-fold improvement in potency. This study establishes that increased hydrophobicity introduced at the central chelating units of Ru(II) coordination compounds can be a useful means by which to optimize antimicrobial activity that is complimentary to the variation of peripheral substituent identity at the chelator's N1 triazole position.

Synthesis, characterization and catalytic activity of novel ruthenium complexes bearing NNN click based ligands

Novel air stable ruthenium(ii) complexes bearing tridentate ligands bis((1-benzyl-1H-1,2,3-triazol-4-yl)methyl)amine (L1), 1-(1-benzyl-1H-1,2,3-triazol-4-yl)-N-(pyridin-2-ylmethyl)methanamine (L2) or 2-(4-phenyl-1H-1,2,3-triazol-1-yl)-N-(pyridin-2-ylmethyl)ethan-1-amine (L3) were synthesised. The nitrogen based ligands were easily prepared by virtue of click chemistry using cheap and commercially available reagents. The ruthenium complexes were obtained by heating the Ru(PPh3)3Cl2 precursor and the tridentate NNN ligand in toluene under reflux for 2 hours, achieving yields of 82-87%. These complexes were fully characterized by means of NMR, FT-IR and high resolution ESI spectroscopy. The crystal structure of one of the complexes was determined. These complexes showed excellent activity and selectivity in the hydrogenation of ketones and aldehydes. DFT calculations show that complex 3 may react through an outer-sphere catalytic cycle rather than via an inner-sphere mechanism.

Coordination-Driven Self-Assembly of Triazole-Based Apoptosis-Inducible Metallomacrocycles

Ru(II)-metallomacrocycles containing 4-pyridyl-1,2,3-triazole moiety were realized by coordination-driven self-assembly. All new compounds were characterized by electrospray ionisation mass spectrometry, elemental analysis, and 1H and 13C NMR spectroscopic techniques. The molecular structure of metallomacrocycle 8 was determined by single-crystal X-ray crystallography. The anticancer activities of metallomacrocycles 5-8 were evaluated by cytotoxicity, cell cycle analysis, and related protein expression. Metallomacrocycle 7 showed the highest cytotoxicity in HepG2 human hepatocellular carcinoma cells. In addition, apoptotic HepG2 cells were analyzed when metallomacrocycle 7 was treated. Our results suggest that metallomacrocycle 7 induces liver cancer cell death by increasing apoptosis and cell cycle arrest and that it has potential use as an agent for the treatment of human hepatocellular carcinoma.

1-Iodobuta-1,3-diynes in Copper-Catalyzed Azide-Alkyne Cycloaddition: A One-Step Route to 4-Ethynyl-5-iodo-1,2,3-triazoles

Cu-catalyzed 1,3-dipolar cycloaddition of iododiacetylenes with organic azides using iodotris(triphenylphosphine)copper(I) as a catalyst was found to be an efficient one-step synthetic route to 5-iodo-4-ethynyltriazoles. The reaction is tolerant to various functional groups in both butadiyne and azide moieties. The synthetic application of 5-iodo-4-ethynyl triazoles obtained was also evaluated: the Sonogashira coupling with alkynes resulted in unsymmetrically substituted triazole-fused enediyne systems, while the Suzuki reaction yielded the corresponding 5-aryl-4-ethynyl triazoles.

Ambient and high-pressure kinetic investigation of methanol substitution in fac-[Re(Trop)(CO)3(MeOH)] by different monodentate nucleophiles

First report of high-pressure methanol substitution by entering monodentate L forms fac-[Re(CO)₃(Trop)(L)] {ΔV^≠_(kL) = +9 – +14 cm⁻³ mol⁻¹}, indicating dissociative/dissociative interchange activation.

First-Row Transition Metal (De)Hydrogenation Catalysis Based On Functional Pincer Ligands

The use of 3d metals in de/hydrogenation catalysis has emerged as a competitive field with respect to "traditional" precious metal catalyzed transformations. The introduction of functional pincer ligands that can store protons and/or electrons as expressed by metal-ligand cooperativity and ligand redox-activity strongly stimulated this development as a conceptual starting point for rational catalyst design. This review aims at providing a comprehensive picture of the utilization of functional pincer ligands in first-row transition metal hydrogenation and dehydrogenation catalysis and related synthetic concepts relying on these such as the hydrogen borrowing methodology. Particular emphasis is put on the implementation and relevance of cooperating and redox-active pincer ligands within the mechanistic scenarios.

Au(III) and Pt(II) Complexes of a Novel and Versatile 1,4-Disubstituted 1,2,3-Triazole-Based Ligand Possessing Diverse Secondary and Tertiary Coordinating Groups

A novel 1,4-disubstituted 1,2,3-triazole-based ligand, 2-(4-(pyridin-2-yl)-1 H-1,2,3-triazol-1-yl)propane-1,3-diamine (ptpd), which possesses pyridyl and diamino secondary and tertiary coordinating groups was synthesized in excellent yield. The reactivity of 2-(1-phenyl-1 H-1,2,3-triazol-4-yl)pyridine (ptp), di- tert-butyl (2-azidopropane-1,3-diyl)dicarbamate (Boc₂-ptpd), and ptpd·3HCl was investigated with Au(III) and Pt(II) precursors. Analysis including X-ray crystal structures of [Au(III)Cl₃(ptp)] (1), [Au(III)Cl₂(ptpd)][Au(I)Cl₂][OH]{[NaAuCl₄·2H₂O]} n (3), and [Pt(II)Cl₂(ptpdH₂)][PtCl₄] (4) revealed that ptpd (i) serves as a monodentate ligand for Au(III) coordinating to the metal center via the pyridine nitrogen only, (ii) preferentially coordinates Au(III) via the bidentate diamino group over the monodentate pyridine group, (iii) can coordinate Pt(II) in a bidentate fashion via the pyridyl nitrogen and the triazole N-3, and (iv) can bridge two Pt(II) centers through bidentate chelation at the diamino group and bidentate chelation via the pyridyl nitrogen and the triazole N-3. ptpd represents a versatile ligand template for the development of mixed metal complexes.

Computational investigations of click-derived 1,2,3-triazoles as keystone ligands for complexation with transition metals: a review

In recent years, metal complexes of organo 1,2,3-triazole click-derived ligands have attracted significant attention as catalysts in many chemical transformations and also as biological and pharmaceutical active agents. Regarding the important applications of these metal-organo 1,2,3-triazole-based complexes, in this review, we focused on the recently reported investigations of the structural, electronic, and spectroscopic aspects of the complexation process in transition metal complexes of 1,2,3-triazole-based click ligands. In line with this, the coordination properties of these triazole-based click ligands with transition metals were studied via several quantum chemistry calculations. Moreover, considering the complexation process, we have presented comparative discussions between the computational results and the available experimental data.

Azide–alkyne cycloaddition reactions in water via recyclable heterogeneous Cu catalysts: reverse phase silica gel and thermoresponsive hydrogels

Functionalized reverse phase silica gel and thermoresponsive hydrogels were synthesized as heterogeneous catalysts supports. Cu(i) and Cu(ii) catalysts immobilized onto two types of supports were prepared and characterized. The copper catalyzed azide–alkyne cycloaddition was performed in water via a one-pot reaction and yielded good results. These catalysts are air stable and reusable over multiple uses.

Azide–alkyne cycloaddition reactions were performed via copper catalysts immobilized onto two types of supports in water.