On chip cryo-anesthesia of Drosophila larvae for high resolution in vivo imaging applications

Fly Me to the Micron: Microtechnologies for Drosophila Research

Multicellular model organisms, such as Drosophila melanogaster (fruit fly), are frequently used in a myriad of biological research studies due to their biological significance and global standardization. However, traditional tools used in these studies generally require manual handling, subjective phenotyping, and bulk treatment of the organisms, resulting in laborious experimental protocols with limited accuracy. Advancements in microtechnology over the course of the last two decades have allowed researchers to develop automated, high-throughput, and multifunctional experimental tools that enable novel experimental paradigms that would not be possible otherwise. We discuss recent advances in microtechnological systems developed for small model organisms using D. melanogaster as an example. We critically analyze the state of the field by comparing the systems produced for different applications. Additionally, we suggest design guidelines, operational tips, and new research directions based on the technical and knowledge gaps in the literature. This review aims to foster interdisciplinary work by helping engineers to familiarize themselves with model organisms while presenting the most recent advances in microengineering strategies to biologists.

Bending Drosophila larva using a microfluidic device enables imaging of its brain and nervous system at single neuronal resolution

Single neuronal imaging of a fully intact Drosophila larva is a difficult challenge for neurosciences due to the robust digging/burrowing behaviour of the Drosophila larva and the lack of intact immobilization methods at single-neuron resolution. In this paper, for the first time, a simple microfluidic device to completely immobilize the brain and the CNS of a live, fully-functioning Drosophila larva for single neuronal imaging has been demonstrated. The design of the microfluidic device contains a unique clamping feature which pins and bends the body of the larva at 1/3rd of its length from the head. This simple twist combined with the pinning mechanism not only could stop the locomotion of the larva but also could immobilize the major movement of internal organs including the CNS. The results showed that the bent trap could keep the single neuron completely inside the field of view (FOV) (50 μm × 50 μm) over 10 min of confocal imaging. The range of motion in the x- and y-axis was approximately 8 μm and 2.5 μm, respectively. This corresponds to a range of 16% and 6% along the axis of the channel and across it compared to the size of the FOV (50 μm × 50 μm). The calcium activity of the single neurons in a 3rd instar GCaMP5 larva (Cha-Gal4/CyO; UAS-GCaMP5G/TM3) was measured while its mouth region was exposed to 20 mM sodium azide (NaN₃) for 5 s. The results showed that the activity of the neurons has been statistically (p < 0.0005) increased (∼60%).

Microfluidics for understanding model organisms

New microfluidic systems for whole organism analysis and experimentation are catalyzing biological breakthroughs across many fields, from human health to fundamental biology principles. This perspective discusses recent microfluidic tools to study intact model organisms to demonstrate the tremendous potential for these integrated approaches now and into the future. We describe these microsystems' technical features and highlight the unique advantages for precise manipulation in areas including immobilization, automated alignment, sorting, sensory, mechanical and chemical stimulation, and genetic and thermal perturbation. Our aim is to familiarize technologically focused researchers with microfluidics applications in biology research, while providing biologists an entrée to advanced microengineering techniques for model organisms.

Building small-scale tools for biology research eliminates the need for time-consuming methods and enables novel experimental paradigms. Here, the authors discuss microfluidics' potential for manipulating or stimulating model organisms and identify barriers to making these tools accessible.

A minimal constraint device for imaging nuclei in live Drosophila contractile larval muscles reveals novel nuclear mechanical dynamics

Muscle contractions produce reiterated cytoplasmic mechanical variations, which potentially influence nuclear mechanotransduction, however information regarding the dynamics of muscle nuclei (myonuclei) in the course of muscle contraction is still missing. Towards that end, a minimal constraint device was designed in which intact live Drosophila larva is imaged, while its muscles still contract. The device is placed under spinning disc confocal microscope enabling imaging of fluorescently labeled sarcomeres and nuclei during muscle contraction, without any external stimulation. As a proof of principle we studied myonuclei dynamics in wild-type, as well as in Nesprin/klar mutant larvae lacking proper nuclear-cytoskeletal connections. Myonuclei in control larvae exhibited comparable dynamics in the course of multiple contractile events, independent of their position along the muscle fiber. In contrast, myonuclei of mutant larvae displayed differential dynamics at distinct positions along individual myofibers. Moreover, we identified a linear link between myonuclear volume and its acceleration values during muscle contraction which, in Nesprin/klar mutants exhibited an opposite tendency relative to control. Estimation of the drag force applied on individual myonuclei revealed that force fluctuations in time, but not the average force, differed significantly between control and Nesprin/klar mutant, and were considerably higher in the mutant myonuclei. Taken together these results imply significant alterations in the mechanical dynamics of individual myonuclei in the Nesprin/klar myonuclei relative to control. Such differences provide novel mechanical insight into Nesprin function in contractile muscles, and might reveal the mechanical basis underlying Nesprin-related human diseases.

LarvaSPA, A Method for Mounting Drosophila Larva for Long-Term Time-Lapse Imaging

Live imaging is a valuable approach for investigating cell biology questions. The Drosophila larva is particularly suited for in vivo live imaging because the larval body wall and most internal organs are transparent. However, continuous live imaging of intact Drosophila larvae for longer than 30 min has been challenging because it is difficult to noninvasively immobilizeimmobilizing larvae for a long time. Here we present a larval mounting method called LarvaSPA that allows for continuous imaging of live Drosophila larvae with high temporal and spatial resolution for longer than 10 hours. This method involves partially attaching larvae to the coverslip using a UV-reactive glue and additionally restraining larval movement using a polydimethylsiloxane (PDMS) block. This method is compatible with larvae at developmental stages from second instar to wandering third instar. We demonstrate applications of this method in studying dynamic processes of Drosophila somatosensory neurons, including dendrite growth and injury-induced dendrite degeneration. This method can also be applied to study many other cellular processes that happen near the larval body wall.

Fly-on-a-Chip: Microfluidics for Drosophila melanogaster Studies

The fruit fly or Drosophila melanogaster has been used as a promising model organism in genetics, developmental and behavioral studies as well as in the fields of neuroscience, pharmacology, and toxicology. Not only all the developmental stages of Drosophila, including embryonic, larval, and adulthood stages, have been used in experimental in vivo biology, but also the organs, tissues, and cells extracted from this model have found applications in in vitro assays. However, the manual manipulation, cellular investigation and behavioral phenotyping techniques utilized in conventional Drosophila-based in vivo and in vitro assays are mostly time-consuming, labor-intensive, and low in throughput. Moreover, stimulation of the organism with external biological, chemical, or physical signals requires precision in signal delivery, while quantification of neural and behavioral phenotypes necessitates optical and physical accessibility to Drosophila. Recently, microfluidic and lab-on-a-chip devices have emerged as powerful tools to overcome these challenges. This review paper demonstrates the role of microfluidic technology in Drosophila studies with a focus on both in vivo and in vitro investigations. The reviewed microfluidic devices are categorized based on their applications to various stages of Drosophila development. We have emphasized technologies that were utilized for tissue- and behavior-based investigations. Furthermore, the challenges and future directions in Drosophila-on-a-chip research, and its integration with other advanced technologies, will be discussed.

Chloroform and desflurane immobilization with recovery of viable Drosophila larvae for confocal imaging

Imaging of living, intact Drosophila larvae is challenged if normal bodily function must be observed or when healthy larvae must be recovered for subsequent studies. Here, we describe a simple and short protocol that employs transient airborne chloroform or desflurane (1,2,2,2-tetrafluoroethyl difluoromethyl ether) to efficiently immobilize larvae without the use of manipulation devices, vaporizers or imaging chambers. This non-lethal method allows the use of anesthetics while allowing tracking of individual Drosophila into adulthood for follow-up experiments. At dosages sufficient to immobilize larvae, Desflurane, but not chloroform reduced the central nervous system response to auditory stimulus. Desflurane doses were sufficient to arrest the heart, however significant rapid recovery was observed. With our method, chloroform provided more rapid anesthesia but slower recovery than Desflurane. Without specialized hardware, this technique allows for repeated imaging of living Drosophila larvae.

Tools to reverse-engineer multicellular systems: case studies using the fruit fly

Reverse-engineering how complex multicellular systems develop and function is a grand challenge for systems bioengineers. This challenge has motivated the creation of a suite of bioengineering tools to develop increasingly quantitative descriptions of multicellular systems. Here, we survey a selection of these tools including microfluidic devices, imaging and computer vision techniques. We provide a selected overview of the emerging cross-talk between engineering methods and quantitative investigations within developmental biology. In particular, the review highlights selected recent examples from the Drosophila system, an excellent platform for understanding the interplay between genetics and biophysics. In sum, the integrative approaches that combine multiple advances in these fields are increasingly necessary to enable a deeper understanding of how to analyze both natural and synthetic multicellular systems.

Microfluidics for mechanobiology of model organisms

Mechanical stimuli play a critical role in organ development, tissue homeostasis, and disease. Understanding how mechanical signals are processed in multicellular model systems is critical for connecting cellular processes to tissue- and organism-level responses. However, progress in the field that studies these phenomena, mechanobiology, has been limited by lack of appropriate experimental techniques for applying repeatable mechanical stimuli to intact organs and model organisms. Microfluidic platforms, a subgroup of microsystems that use liquid flow for manipulation of objects, are a promising tool for studying mechanobiology of small model organisms due to their size scale and ease of customization. In this work, we describe design considerations involved in developing a microfluidic device for studying mechanobiology. Then, focusing on worms, fruit flies, and zebrafish, we review current microfluidic platforms for mechanobiology of multicellular model organisms and their tissues and highlight research opportunities in this developing field.