Applications of guar gum polysaccharide for pharmaceutical drug delivery: A review

Bio-based materials are rapidly replacing synthetic materials owing to their significant biomedical applications, easy availability, nontoxicity, biodegradability and biocompatibility. Guar gum (GG) is a plant-derived biocompatible and biodegradable polymeric compound found abundantly in nature. It is a non-ionic, hydrophilic carbohydrate and is a cost-effective hydrocolloid polysaccharide considered as a wonderful representative of the new generation of plant gums. Various composites of guar gum with other polymers have been reported in last few decades and they are extensively used in different industries like food, textile, mining, petrochemical, paper and explosives etc. Easy availability, non-toxicity, eco-friendly and biodegradable nature of GG has made it ideal candidate for for drug delivery (DD) applications. GG based hydrogels, films, scaffolds and nanoparticles have been explored widely for their DD applications. These non-toxic DD carriers can be used for targeted drug delivery. This review article directs the current efforts and improvements on GG and GG-based materials to be used in DD.

Recent developments in natural biopolymer based drug delivery systems

Targeted delivery of drug molecules to diseased sites is a great challenge in pharmaceutical and biomedical sciences. Fabrication of drug delivery systems (DDS) to target and/or diagnose sick cells is an effective means to achieve good therapeutic results along with a minimal toxicological impact on healthy cells. Biopolymers are becoming an important class of materials owing to their biodegradability, good compatibility, non-toxicity, non-immunogenicity, and long blood circulation time and high drug loading ratio for both macros as well as micro-sized drug molecules. This review summarizes the recent trends in biopolymer-based DDS, forecasting their broad future clinical applications. Cellulose chitosan, starch, silk fibroins, collagen, albumin, gelatin, alginate, agar, proteins and peptides have shown potential applications in DDS. A range of synthetic techniques have been reported to design the DDS and are discussed in the current study which is being successfully employed in ocular, dental, transdermal and intranasal delivery systems. Different formulations of DDS are also overviewed in this review article along with synthesis techniques employed for designing the DDS. The possibility of these biopolymer applications points to a new route for creating unique DDS with enhanced therapeutic qualities for scaling up creative formulations up to the clinical level.

The Effect of Eco-Friendly Inhibitors on the Corrosion Properties of Concrete Reinforcement in Harsh Environments

In the present research, the synergistic effect of Arabic and guar gum inhibitors on the corrosion efficiency of concrete reinforcement was investigated. Thus, eight types of Arabic and guar gum combinations with 100, 250, 500, 750, and 1000 ppm were added to the steel reinforcement for 1, 7, 28, 48, and 72 days. The corrosion behavior of the samples was investigated by the electrochemical impedance (EIS) test. Water transmissibility, electrical resistivity, and compressive strength of concrete were also studied. The results showed that adding inhibitors generally increased the compressive strength of concrete. It was also found that water transmissibility was reduced by the addition of inhibitors. The electrical resistivity of the samples increased slightly with increasing time up to 72 days. EIS and Tafel results have demonstrated that Arabic and guar gums are effective inhibitors for reinforced concrete structures. Furthermore, scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) utilized to analyze the samples indicated that inhibitor grain size was enhanced by enhancing the concentration of the inhibitor combination, showing that the guar and Arabic inhibitor combinations were properly absorbed on the reinforcement surface. Results showed that a sample with 250 ppm Arabic gum and 250 ppm guar gum having a properly distributed inhibitor combination on the reinforcement surface creates a desirable cathode current.

Oral organic nanovaccines against bacterial and viral diseases

Vaccines have saved millions of humans and animals from deadly diseases. Many vaccines are still under development to fight against lethal diseases. Indeed, subunit vaccines are a versatile approach with several advantageous attributes, but they lack strong immunogenicity. Nanotechnology is an avenue to vaccine development because nanoparticles may serve as nanocarriers and adjuvants, which are critical aspects for oral vaccines. This review provides an update of oral organic nanovaccines, describing suitable nanomaterials for oral vaccine design and recent (last five-year view) oral nanovaccine developments to fight against those principal pathogens causing human and animal diseases.

NIR-II Light-Modulated Injectable Self-Healing Hydrogel for Synergistic Photothermal/Chemodynamic/Chemo-therapy of Melanoma and Wound Healing Promotion

The development of an injectable multifunctional hydrogel with tumor therapy, antibacterial treatment and wound healing properties is essential for simultaneous eradicating melanoma and promoting wound healing of tumor-initiated skin defects....

Formulation and In-Vitro Characterisation of Cross-Linked Amphiphilic Guar Gum Nanocarriers for Percutaneous Delivery of Arbutin

Nano-colloidal systems formulated from amphiphilically-modified polysaccharides (degree of modification 16.6%) are focus of prominent study due to their potential to augment active penetration across the skin. Here we report the synthesis of amphiphilically-modified guar gum (GBE-GG) prepared by grafting with glycidol butyl ether (GBE), which were subsequently formed into nanocarriers and loaded with α-arbutin (22.3% loading). The monodispersed and close-to-spherical nanocarriers (size range 239-297 nm) formed via cross-linking were adequately stable mainly at low temperature (4 °C) under physiological pH condition. α-arbutin was released from GBE-GG NPs in a more sustained manner and the release profiles can be accurately represented by the 1^st order kinetic model. In-vitro interactions on immortalised human keratinocytes (HaCaT) cells revealed an increase in biological membrane permeability as well as the absence of cellular toxicity at application pertinent concentrations. No substantial haemolytic activity appeared and flow cytometry analysis revealed effective cellular uptake, suggesting their potential as promising nanocarriers for percutaneous delivery that warrants further comprehensive research.

Quaternary ammonium silane-reinforced agar/polyacrylamide composites for packaging applications

Agar/polyacrylamide/quaternary ammonium silane-based (A/P/QAS-based) composite films were developed for food and biomedical packaging applications. The structural, optical, and surface morphological properties of the A/P and A/P/QAS composites were characterized by various characterization techniques in terms of thermogravimetric analysis, differential scanning calorimetry analyses, mechanical and rheological properties. Results showed that the 5% gravimetric loss (57.8-139.1 °C), glass transition temperature (179-189.9 °C) and tensile strength (35.2-47.8 MPa) of the prepared composites increased with increasing polyacrylamide content. The contact angle and water barrier properties of the composites were considerably improved by the addition of QAS. To compare WVP values of the A/P/QAS composite with neat AP composite films it reduced nearly 46% (2.45 to 1.32 × 10^-9 g/m² Pas). The A/P/QAS composites showed excellent antimicrobial properties against five different organisms. The Staphylococcus aureus exhibited highest 25 mm for gel and 18.1 mm for film of A/P/QAS composites. All the composites exhibited shear-thinning behavior, and their viscosity increased with increasing polyacrylamide content. The storage moduli of the prepared hydrogel composites were in the range of 5000-10,600 Pa at 1 rad/s and increased continuously over the entire frequency range. The dynamic rheological properties of A/P and A/P/QAS composites indicated that the prepared composites had good mechanical strength. Biopolymer based A/P and A/P/QAS composite films are suitable for green composite packaging applications.

Recent advances in guar gum based drug delivery systems and their administrative routes

Guar gum-based drug carrier systems have gained attention for the delivery of various therapeutic agents via different administration routes for attaining controlled and sustained release. Guar gum offers a safe and effective system for drug delivery due to its natural occurrence, easy availability, biocompatibility, and biodegradability, besides simple and mild preparation techniques. Furthermore, the possibility of using various routes such as oral, buccal, transdermal, intravenous, and gene delivery further diversify guar gum applications in the biomedical field. This review delineates the recent investigation on guar gum-based drug carrier systems like hydrogels, nanoparticles, nanocomposites, and scaffolds along with their related delivery routes. Also, the inclusion of data of the loading and subsequent release of the drugs enables to explore the noble and improved drug targeting therapies.

Development of fluorescein isothiocyanate conjugated gellan gum for application of bioimaging for biomedical application

Herein, gellan gum (GG), a nature-derived polysaccharide, was applied to combine fluorescein isothiocyanate (FITC) to fabricate a bio-imaging material. The synthesis process of the FITC grafted GG (GG-F) and manufacturing method of GG-F scaffolds are presented. Chemical, physicochemical, and mechanical properties were characterized. In vitro study and in vivo study by implanting the GG-F scaffolds under the subcutaneous area of the nude mice were carried out to verify biocompatibility and safety of the material. The emission of the FITC was confirmed with high-resolution confocal laser scanning microscope (SR CLMS) and fluorescence in vivo imaging (FOBI). The results exhibited well-synthesized GG-F and the manufactured GG-F scaffolds showed similar property of GG scaffolds which confirms that the chemical modification does not affect the property of GG scaffolds. The in vitro and in vivo study exhibited biocompatibility of the GG-F material. Overall, the properly blended GG-F in GG did not influence the characteristics of the pristine GG except for the chemical property. Therefore, the GG-F can be applied for the future analysis in verifying the mechanism of GG characters and can be a promising candidate for bio-imaging.

Aquasorbent guargum grafted hyperbranched poly (acrylic acid): A potential culture medium for microbes and plant tissues

This study reports the synthesis of an unprecedented bio-based aquasorbent guargum-g-hyperbranched poly (acrylic acid); bGG-g-HBPAA by employing graft-copolymerization and "Strathclyde methodology" simultaneously in emulsion and its possible use as a sustainable nutrient bed for the effective growth of Anabaena cylindrica and Vigna radiata seedlings. The formation of bGG-g-HBPAA and the presence of hyperbranched architectures was confirmed from XRD, FTIR, ¹³C NMR, solubility, intrinsic viscosity, BET surface area/ pore size, SEM and rheology analyses. The synthesized grade with a branching percent of 65.4% and a swelling percentage of 13,300% facilitated maximum growth of the cultured species as compared to guargum and its linear graft. Semi synthetic bGG-g-HBPAA culture medium was optically transparent, dried at a controlled rate, held a huge amount of water for growth, provided sufficient space for unhindered growth and featured dimensional stability.

Ultra-fast and highly efficient removal of cadmium ions by magnetic layered double hydroxide/guargum bionanocomposites

Finding effective methodologies for the removal of heavy metals from contaminated water are really significant. Facile and "green" techniques for adsorbents fabrication are in high demand to satisfy a wide range of practical applications. This report presents of an efficient method for preparing Fe₃O₄@ layered double hydroxide@ guargum bionanocomposites (GLF-BNCs). First of all, the LDH coated Fe₃O₄ nanoparticles were simply synthesized, using ultrasonic irradiation. The citrate coated Fe₃O₄ nanoparticles which were under negative charging and LDH nanocrystals which were charged positively make electrostatic interaction which formed a stable self-assembly component, and then guargum as a biopolymer were linked onto Fe₃O₄@LDH via an in situ growth method. Furthermore, the GLF-BNCs had the ability to remove cadmium ions (Cd²⁺) from the aqueous solutions. Adsorption studies indicate that the Langmuir isotherm model and the kinetic model in pseudo-second order were appropriate for Cd(II) removal. The maximum Cd(II) adsorption capacity of the GLF8% was 258 mg g^-1. The Cd(II) was adsorbed from aqueous solutions very quickly with the contact time of 5 min by the GLF 8%, suggesting that GLF-BNCs may be a promising adsorbent for removing Cd(II) from wastewater. The effect of Fe₃O₄@LDH contents (2, 4 and 8 wt.%) on the thermal, physicomechanical, and morphological properties of guargum were investigated by Fourier transform infrared spectroscopy, X-ray diffraction (XRD), thermal gravimetric analysis (TGA), field emission scanning electron microscopy, transmission electron microscopy (TEM), Energy-dispersive X-ray spectroscopy and Brunauer-Emmett-Teller (BET) specific surface area techniques. The TEM results indicated that the LDH platelets are distributed within the polymer matrix.

Synthesis of methylcellulose/cellulose nano-crystals nanocomposites: Material properties and study of sustained release of ketorolac tromethamine

Non-toxic nanocomposites based bio-films obtained from methylcellulose (MC) can reduce environmental problems associated with synthetic polymers. A new facile route for the isolation of cellulose nano-crystals (CNC) from jute waste is successfully utilized here. The fabrication of CNC reinforced MC nanocomposites by film casting technique and the studies of the effect of CNC on the properties of the MC based nanocomposites have been reported. The synthesized nanocomposites have shown improved UV resistance, mechanical, barrier, and thermal properties. FTIR results established the physicochemical compatibility between the drug, MC and CNC in nanocomposites. In vitro permeation studies performed by using Franz diffusion cell revealed diffusion mediated sustained drug release from the devices due to the presence of interaction between MC and CNC through H-bonding, electrostatic interaction between the hydrophilic polymer/CNC chains with the drug and the formation of tortuous path. The nanocomposites can be used for edible packaging and transdermal drug delivery.