Low-cost photocatalytic membrane modified with green heterojunction TiO2/ZnO nanoparticles prepared from waste

The combination of photocatalysis and membrane procedures represents a promising approach for water treatment. This study utilized green synthesis methods to produce TiO2 nanoparticles (NPs) using Pomegranate extract and ZnO nanoparticles using Tangerine extract. These nanoparticles were then incorporated into a polyvinyl chloride (PVC) nanocomposite photocatalytic membrane. Different devices were used to examine the properties of nanocomposite membranes. The prepared membranes' morphology was examined using atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM). The hydrophilicity of the membrane surface was assessed through the measurement of contact angle, while the crystal structure and chemical bonding were analyzed using Raman and Fourier transform infrared spectroscopy (FT-IR). The study also encompassed an examination of the mechanical properties. The hydrophilicity of the modified membrane exhibited a significant improvement. Additionally, there was an observed increase in both the pure water flux and rejection values. The photocatalytic activity of the membrane was found to be enhanced when exposed to sunlight as compared to when kept in the dark. The TiO2/ZnO nanocomposites membrane exhibited the highest level of photocatalytic degradation, achieving a rejection rate of 98.7% compared to the unmodified membrane. Therefore, it was determined that the TiO2/ZnO nanocomposites membrane exhibited superior performance to the other membranes assessed. The potential utility of our research lies in its application within the water treatment industry, specifically as an effective technique for modifying PVC membranes.

Fabrication and Evaluation of Basil Essential Oil-Loaded Halloysite Nanotubes in Chitosan Nanocomposite Film and Its Application in Food Packaging

Increasing health concerns regarding the use of plasticware have led to the development of ecofriendly biodegradable packaging film from natural polymer and food additives. In the present study, basil essential oil (BEO) loaded halloysite nanotubes (HNTs) composite films were synthesized using a solution casting method. The effects of BEO and nanotube concentration on the mechanical, physical, structural, barrier, and antioxidant properties of films were evaluated. Scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared (FTIR) demonstrated well-dispersed HNTs and BEO in tailored composite films. The addition of BEO in Chitosan (Ch) film caused darkening of the film color; furthermore, the incorporation of HNTs in varied concentrations increased opaqueness in Ch/BEO film. The Ch/BEO film, upon adding HNTs 5-30 wt%, exhibited a corresponding increase in the film thickness (0.108-0.135 mm) when compared with the Ch/BEO film alone (0.081 mm). The BEO-loaded HNTs composite films displayed reduced moisture content and characteristic barrier and UV properties. The Ch/BEO film with 15 wt% HNTs was found to have enhanced antioxidant activity. The Ch/BEO/HNTs composite also managed to prevent broccoli florets from losing weight and firmness during storage. The enhanced barrier and antioxidant qualities of the nanocomposite film suggest its potential application in the food processing and packaging sector. This is the first ever report on the fabrication of nanocomposite film using BEO and HNTs for food packaging. The low production cost and ecofriendly approach make the film acceptable for further research and commercialization thereafter.

Nanofiltration Membranes Modified with a Clustered Multiquaternary Ammonium-Based Ionic Liquid for Improved Magnesium/Lithium Separation

Lithium separation is of great significance to overcome the lithium supply shortage resulting from a heightened demand in the energy sector. The low selectivity of polymer nanofiltration membranes for lithium extraction from concentrated Mg/Li mixtures caused by miniaturized pore structures and weak and unstable positive surface charges limits their practical implementation. To address the surface charge strength and stability, a novel ionic liquid monomer, N¹-(6-aminohexyl)-N¹,N¹,N⁶,N⁶,N⁶-pentamethylhexane-1,6-diaminium bromide (denoted as DABIL), is first synthesized and covalently anchored on a pristine polyamide thin-film composite (TFC) membrane via a secondary amidation reaction for improved selective lithium separation from Mg/Li mixtures. DABIL modification of the polyamide network contributes to increased surface hydrophilicity, an enlarged membrane pore structure, and reinforced Donnan exclusion effects. Molecular dynamics simulation confirmed that the difference of the interaction energies between water and the multication groups dominates the surface properties. The DABIL membrane exhibits sixfold enhancement of water permeability compared to the unmodified membrane and outperforms the recently reported state-of-the-art positively charged membranes. It presents an improved Li⁺/Mg²⁺ selectivity of 26.49, suggesting the membranes' potential for lithium recovery. Moreover, the membrane shows efficient antibacterial activity for mitigating biofilm formation. We establish that functionalization of TFC membranes with ionic liquids containing multication side chains could be a promising approach to achieve improved and sustainable permselectivity for the recovery of critical metal resources.

Improvement of polyvinyl chloride nanofiltration membranes by incorporation of multiwalled carbon nanotubes modified with triethylenetetramine to use in treatment of dye wastewater

Multiwalled carbon nanotubes modified with triethylenetetramine (TETA) as an organic nanofiller was used in fabrication of polyvinyl chloride (PVC) nanofiltration membranes. The membranes were prepared by the phase separation method and immersion precipitation technique. For this purpose, various percentages of the TETA-MWCNTs were added to the casting solutions and the membrane films were formed and placed in a bath water. In order to identify the membranes and their properties, SEM images, contact angle and FTIR-ATR analyses were taken from the prepared nanocomposite membranes. The membranes performance in terms of water/protein/dye permeability, protein rejection and Lanasol blue 3R dye rejection were investigated. Establishing hydrogen bond between the water molecules and the functional groups of MWCNTs enhanced the hydrophilicity of the fabricated membranes and caused an increase in permeability. The permeability in the membrane containing 0.25 wt% of TETA-MWCNTs reached its highest value, and adding more amounts reduced flux by blocking the membrane pores. There was also a significant decrease in the rate of membrane fouling for the hybrid membranes. Flux recovery ratio reached from 62.2% to 76.1%. Also, rejection of BSA and Lanasol blue 3R combination dye was increased for the modified membranes.

Antimicrobial Applications of Clay Nanotube-Based Composites

Halloysite nanotubes with different outer surface/inner lumen chemistry (SiO₂/Al₂O₃) are natural objects with a 50 nm diameter hollow cylindrical structure, which are able to carry functional compounds both inside and outside. They are promising for biological applications where their drug loading capacity combined with a low toxicity ensures the safe interaction of these nanomaterials with living cells. In this paper, the antimicrobial properties of the clay nanotube-based composites are reviewed, including applications in microbe-resistant biocidal textile, paints, filters, and medical formulations (wound dressings, drug delivery systems, antiseptic sprays, and tissue engineering scaffolds). Though halloysite-based antimicrobial materials have been widely investigated, their application in medicine needs clinical studies. This review suggests the scalable antimicrobial nano/micro composites based on natural tubule clays and outlines research and development perspectives in the field.

TiO2 decorated functionalized halloysite nanotubes (TiO2@HNTs) and photocatalytic PVC membranes synthesis, characterization and its application in water treatment

In this study photocatalyst, TiO₂@HNTs were prepared by  synthesizing TiO₂ nanoparticles in situ on the  functionalized halloysite nanotubes (HNTs) surface. Photocatalytic PVC membrane TiO₂@HNTs M2 (2 wt.%) and TiO₂@HNTs M3 (3 wt.%) were also prepared. Photocatalyst TiO₂@HNTs and photocatalytic PVC membranes were used to study the photocatalytic activity against the methylene blue (MB) and rhodamine B (RB) dyes in UV batch reactor. The structure and morphology of photocatalyst and photocatalytic PVC membrane were characterized by fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), UV-Vis spectrophotometer and photoluminescence (PL). The PL study showed that the oxygen vacancies and surface hydroxyl groups present on the surface of TiO₂@HNTs act as excellent traps for charge carrier, reducing the electron-hole recombination rate.TiO₂@HNTs 2 (2 wt.%) and TiO₂@HNTs 3 (3 wt.%) degraded MB dye up to 83.21%, 87.47% and RB dye up to 96.84% and 96.87%, respectively. TiO₂@HNT photocatalyst proved to be stable during the three consecutive cycle of photocatalytic degradation of the RB dye. TiO₂@HNTs M2 and TiO₂@HNTs M3 degraded MB dye up to 27.19%, 42.37% and RB dye up to 30.78%, 32.76%, respectively. Photocatalytic degradation of both the dyes followed the first-order kinetic model. Degradation product analysis was done using the liquid chromatography–mass spectrometry (LC-MS) and the results showed that the dye degradation was initiated by demethylation of the molecule. MB and RB dye degradation reaction were tested by TBA and IPA as OH^* and H⁺ scavengers respectively. Mechanism of photocatalytic activity of TiO₂@HNTs and photocatalytic PVC membrane were also explained.