Coupling of synchronous fluorescence spectroscopy with derivative amplitude outcomes for simultaneous determination of metoprolol succinate and olmesartan medoxomil in combined pharmaceutical preparation: Application in spiked human plasma

For the first time a spectrofluorimetric method had been achieved for the concurrent analysis of metoprolol succinate (MET) and olmesartan medoxomil (OLM). The approach depended on assessing the first order derivative (¹D) of the synchronous fluorescence intensity of the two drugs in aqueous solution at Δλ of 100 nm. The amplitudes of ¹D at 300 nm and 347 nm were measured for MET and OLM, respectively. The linearity ranges were 100-1000 ng/mL and 100-5000 ng/mL for OLM and MET, respectively. This approach is uncomplicated, repetitive, quick, and affordable. The results of analysis had been statistically verified. The validation assessments were carried out following the recommendations of The International Council for Harmonization (ICH). This technique could be employed to assess marketed formulation. The method was sensitive with limits of detection (LOD) of 32 ng/ml and 14 ng/mL for MET and OLM, respectively. Limits of quantitation (LOQ) were 99 ng/ml for MET and 44 ng/mL for OLM. So it can be applied to determine both drugs in spiked human plasma within the linearity ranges of 100-1000 ng/mL for OLM and 100-1500 ng/mL for MET.

Green fitted second derivative synchronous spectrofluorometric method for simultaneous determination of remdesivir and apixaban at Nano gram scale in the spiked human plasma

Remdesivir and apixaban have been included in the treatment guidelines of several countries for severe COVID-19 infections. To date, no analytical method has been developed for the determination of remdesivir and apixaban in plasma matrix. The main objective of this work was to develop a highly sensitive, green-adapted spectrofluorometric method for the determination of remdesivir and apixaban at the Nanoscale. Remdesivir and apixaban showed overlapping fluorescence emission spectra at 403 nm and 456 nm when excited at 246 nm and 285 nm, respectively. This overlap was resolved in two steps. The first step was synchronous fluorescence scanning of remdesivir and apixaban, and the second step was manipulation of the second-order derivative for the obtained spectra. These steps allowed complete resolution of the overlapping fluorescence spectra and selective determination of remdesivir and apixaban at 410 and 469 nm, respectively. The variables affecting the synchronous scanning of the aforementioned drugs were optimized in terms of sensitivity parameters and principles of green analytical chemistry. The described method allowed sensitive determination of remdesivir and apixaban over the concentration range of 5-200 ng/mL and 50-3000 ng/mL, respectively. The described method was validated and successfully applied for the simultaneous determination of the mentioned drugs in pure form and in spiked human plasma.

Different spectrophotometric methods for simultaneous determination of lesinurad and allopurinol in the new FDA approved pharmaceutical preparation; additional greenness evaluation

Lesinurad and allopurinol have been formulated in a combined dosage form providing a new challenge for the treatment of gout attacks. Two mathematical based spectrophotometric methods, area under the curve, and artificial neural networks have been developed for simultaneous determination of lesinurad and allopurinol in pure form and in combined pharmaceutical dosage form. Area under the curve has been utilized to resolve the spectral overlap between lesinurad and allopurinol. Values of area under the curve and area absorptivity were measured at two selected wavelength ranges of 242-250 nm and 255-265 nm. Two mathematically constructed equations have been used to determine the concentrations of the drugs under the study. Advanced chemometry based model, artificial neural network, has been developed utilizing the UV spectral data of lesinurad and allopurinol through various defined steps. A five-level, two-factor experimental design was used to construct 25 mixtures. Thirteen mixtures were used to set up the calibration model and 12 mixtures were used to construct a validation set. The artificial neural network model was optimized to enable precise spectrophotometric determination of the drugs under the study. The described mathematically bases spectrophotometric methods have been successfully applied to the determination of lesinurad and allopurinol in the new combined, Duzallo® tablets. Furthermore, the greenness of the described methods was assessed using four different tools namely, the national environmental method index, the analytical eco-scale, the green analytical procedure index and the AGREE evaluation method. The proposed methods showed more adherence to the greenness characters in comparison to the previously reported HPLC method.

Spectrofluorimetric quantitative analysis of favipiravir, remdesivir and hydroxychloroquine in spiked human plasma

Favipiravir, remdesivir and hydroxychloroquine have been suggested in COVID-19 Treatment Guidelines Panel of many countries. Synchronous spectrofluorometric measurement provides sensitive tool for resolving the overlapped spectra of multicomponent drugs through converting the wider spectra to narrower sharp spectra. This work introduces the first fluorescence spectroscopic method for quantitative analysis of favipiravir, remdesivir and hydroxychloroquine in spiked human plasma. Testing the fluorescence spectra of favipiravir, remdesivir and hydroxychloroquine shows severe overlap, which hinders the direct quantification of the cited drugs. To overcome the overlapping issue, the drugs under the study have been measured in the synchronous mode at Δλ = 60 nm. Favipiravir could be measured directly at 423 nm without interference of remdesivir or hydroxychloroquine. Synchronous measuring the cited drugs at Δλ = 130 nm with mathematical transforming to the first order derivative spectra allowing remdesivir and hydroxychloroquine at 384 nm and 394 nm, respectively without interference from favipiravir. Different factors affecting the spectrofluorometric measurement process have been verified. The drugs under the study have been successfully quantitatively analyzed in the spiked plasma using the proposed method.

Spectrophotometric quantitative analysis of lesinurad using extractive acid dye reaction based on greener selective computational approach

Computational studies introduce an integral approach for finding greener methods through testing solvents for reactions and extractions. Lesinurad is a novel selective uric acid reabsorption inhibitor prescribed for the treatment of chronic gout. Computational calculations were achieved to choose the best acid dye used for sensitive visible spectrophotometric determination of lesinurad. The calculations were performed using Gaussian 03 software based on density functional theory method with B3LYP/6-31G(d) basis set. The obtained results revealed that bromophenol blue was preferred for lesinurad than other acid dyes based on the higher calculated interaction energy. The described method was based on the reaction of lesinurad with the theoretically selected acid dye bromophenol blue to form a yellow ion-pair complex. The absorption spectra showed maximum sharp peaks at 418 nm. Different factors affecting the reaction were optimized. Beer's law was demonstrated over the concentration range of 2-12 μg/mL lesinurad. The described reaction was utilized for the spectrophotometric determination of lesinurad in pure form and in the pharmaceutical preparation. The greenness of the described method was assessed using four different tools namely, the national environmental method index, the analytical eco-scale, the green analytical procedure index and the novel analytical greenness metric. The proposed method seemed to be superior to the reported HPLC method with respect to the metrics of the greenness characters.

Application of green first derivative synchronous spectrofluorometric method for quantitative analysis of fexofenadine hydrochloride and pseudoephedrine hydrochloride in pharmaceutical preparation and spiked human plasma

Fexofenadine hydrochloride and pseudoephedrine hydrochloride are prescribed in a combined dosage form for the treatment of allergic rhinitis. In the present work, a sensitive synchronous fluorescence spectroscopic method was applied in conjunction with first derivative for quantitative estimation of fexofenadine hydrochloride and pseudoephedrine hydrochloride in pure form, pharmaceutical tablets and spiked human plasma. Fexofenadine hydrochloride showed its conventional emission spectrum at 294 nm when excited at 267 nm. On the other hand, pseudoephedrine hydrochloride showed its conventional emission spectra at 286 nm when excited at 261 nm. The fluorescence intensities were greatly enhanced by the use of sodium dodecyl sulphate as a micellar surfactant. Application of the synchronous mode to measure the fluorescence spectra of the above drugs provided sharp narrowing bands, but the overlap was not completely resolved. Derivatization of the synchronous spectra to the first order completely resolved the overlap of the fluorescence spectra and allowed simultaneous quantitative determination of the drugs under study. Fexofenadine hydrochloride and pseudoephedrine hydrochloride could be determined from their first-order synchronous spectra at 286 and 294 nm, respectively, without interfering with each other. The method showed linearity with an excellent correlation coefficient in the concentration range of 100–1500 ng/mL for Fexofenadine hydrochloride and 50–1000 ng/mL for pseudoephedrine hydrochloride. The method was successfully applied for the simultaneous determination of the studied drugs in pharmaceutical formulation, with mean percent recoveries for Fexofenadine hydrochloride and pseudoephedrine hydrochloride of 99.49 ± 0.931 and 98.67 ± 0.634, respectively, and in spiked human plasma, with mean percent recoveries for Fexofenadine hydrochloride and pseudoephedrine hydrochloride of 95.21 ± 1.938 and 94.89 ± 1.763, respectively. Furthermore, the greenness of the described method was assessed using four different tools namely, the national environmental method index, the analytical eco-scale, the green analytical procedure index and the AGREE evaluation method. The proposed method seemed to be superior to the reported HPLC method with respect to the metrics of the greenness characters.

Quantitative analysis of favipiravir and hydroxychloroquine as FDA-approved drugs for treatment of COVID-19 using synchronous spectrofluorimetry: application to pharmaceutical formulations and biological fluids

Coronavirus disease 2019 (COVID-19) is a contagious viral infection caused by coronavirus 2 (SARS-CoV-2) that causes severe acute respiratory syndrome. It has ravaged several countries and burdened many healthcare systems. As the process of authorizing a novel treatment for human use is extensive and involves multiple phases to obtain safety information and identify potential concerns. Therefore, the fastest and easiest choice was to use United States Food and Drug Administration (US FDA)-approved drugs such as favipiravir and hydroxychloroquine. For the simultaneous estimation of both medications, a simple synchronous spectrofluorimetric approach was established in which both drugs were measured at 372 and 323 nm, respectively in the presence of each other without interference at Δλ 60 nm. The effect of various experimental conditions on synchronous fluorescence intensities were thoroughly investigated and optimized. The maximum synchronous fluorescence intensities were obtained at pH 5.4 using acetate buffer (0.2 M, 0.5 ml) and ethanol as a diluent. Excellent linearity ranges were obtained using 1.0-18.0 ng/ml and 10.0-120.0 ng/ml for favipiravir and hydroxychloroquine, respectively. The approach exhibited high sensitivity with detection limits down to 0.25 ng/ml and 1.52 ng/ml and quantitation limits down to 0.77 ng/ml and 4.62 ng/ml, respectively. Spiking human plasma samples with the studied drugs yielded high % recoveries, allowing a significant bioanalytical application. Moreover, the method was validated according to International Conference on Harmonization guidelines and further applied to commercial pharmaceutical preparations with good results.

Comparative evaluation of different mathematical models for simultaneous UV spectrophotometric quantitative analysis of velpatasvir and sofosbuvir

Velpatasvir and sofosbuvir are new drugs prescribed in a combined pharmaceutical dosage form that pose a new challenge for the treatment of chronic hepatitis C. In this work, a comparative evaluation of the classical mathematical model, simultaneous equations, and the advanced mathematical model, partial least squares, for the spectrophotometric quantitative analysis of velpatasvir and sofosbuvir in bulk powder and in the new combined pharmaceutical dosage form was presented. The mathematical simultaneous equation method was used to resolve the overlap between velpatasvir and sofosbuvir. The absorbance and absorbativity values at 255 and 244.8 were used to construct two mathematical equations required for spectrophotometric quantitative analysis of the drugs under study. Partial least squares, an advanced mathematical tool dealing with the full spectral data of velpatasvir and sofosbuvir, was also introduced. An experimental design for the calibration sets and validation sets for the binary mixture of the drugs under study were created. The model was optimized based on a five-level, two-factor experimental design. Pre-processing of the spectral data was applied and resulted in the exclusion of the spectral region from 200 to 230 nm due to noise. The described methods were successfully applied to the spectrophotometric quantitative analysis of velpatasvir and sofosbuvir in Epclusa® tablets.

Synchronized spectrofluorimetric determination of ponatinib and curcumin as an effective therapeutic combination in laboratory prepared mixtures and human plasma samples

Curcumin is a natural product that is frequently utilized in cancer prevention and treatment. The significant benefit of vegetable-derived nutraceuticals in combination with widespread cytostatic medication such as ponatinib is to reduce toxicity and side effects. In this paper, we focus the study on analytical quantification of ponatinib and curcumin through highly sensitive synchronous spectrofluorometric method. Applying this method at Δλ = 160 nm, each of ponatinib and curcumin could be measured at 303 and 412 nm without interference from each others. The diverse experimental factors impacting the performance of the method were studied and optimized. The method exhibited a reasonable linearity in the ranges of 5.0-60.0 and 10.0-200.0 ng/mL for ponatinib and curcumin, respectively with detection limits of 1.48 and 1.22 ng/mL and quantitation limits of 4.49 and 3.68 ng/mL, respectively. The anticipated method was employed for the assessment and evaluation of the studied drugs in the spiked human plasma samples. The mean % recoveries in plasma samples (n = 6) for each of ponatinib and curcumin were 99.84 ± 1.86 and 100.06 ± 2.72, accordingly. The developed method was validated in conformity with the requirements of International Council of Harmonization (ICH).

Application of different spectrofluorimetric approaches for quantitative determination of acetylsalicylic acid and omeprazole in recently approved pharmaceutical preparation and human plasma

Acetylsalicylic acid and omeprazole were recently formulated by the new FDA-approved drug Yosprala ® Tablets. This novel combination was prescribed to reduce the risk of myocardial infarction in patients who were at risk for developing peptic ulcer while taking acetylsalicylic acid. In the current work, two different high precision sensitive fluorescence spectroscopic methods were developed for quantitative analysis of the above drugs in pharmaceutical dosage form and spiked human plasma. Acetylsalicylic acid was quantitatively analyzed due to its unique native fluorescence nature. The fluorescence emission of acetylsalicylic acid was quantitatively determined at 404 nm after excitation at 296 nm without any interference from omeprazole. Omeprazole, which has a free terminal secondary amino group, reacted with 4-chloro-7-nitrobenzo-2-oxa-1, 3-diazole (NBD-Cl) by a nucleophilic substitution mechanism to form a highly fluorescent dark yellow fluorophore. Omeprazole was quantitatively analyzed by measuring the emission fluorescence intensity of the dark yellow fluorophore at 535 nm after excitation at 465 nm. Various parameters affecting the described methods were carefully checked and optimized. The calibration curves were found to be linear over the concentration range of 50-1600 ng/ml for acetylsalicylic and 30-2000 ng/ml for omeprazole. The proposed methods were successfully applied to the quantitative analysis of the two drugs in the pharmaceutical dosage form Yosprala ® and in spiked human plasma.

Simultaneous spectrophotometric quantitative analysis of elbasvir and grazoprevir using assisted chemometric models

Artificial neural networks and genetic algorithm artificial neural networks, chemometric assisted spectrophotometric models, were developed for the quantitative analysis of elbasvir and grazoprevir in their newly FDA approved pharmaceutical dosage form. The UV absorption spectra of elbasvir and grazoprevir show severe degree of overlap which caused difficulty for selecting certain spectrophotometric method with advantage of simultaneous quantitative analysis of the cited drugs. After extensive study and many experimental trials, artificial neural networks and genetic algorithm artificial neural networks were the suitable models for the quantitative analysis of studied drugs in their binary mixture. Experimental design and constructing the calibration and validation sets of the binary mixture were achieved to implement the proposed models. The models were optimized with the aid of five-levels, two factors experimental design. The designed models were successfully applied to the quantitative analysis of Zepatier® tablets. The results were statistically compared with another reported HPLC quantitative analytical method with no significant difference by applying Student t-test and variance ratio F-test.

A novel quality by design approach for development and validation of a green reversed-phase HPLC method with fluorescence detection for the simultaneous determination of lesinurad, febuxostat, and diflunisal: Application to human plasma

A novel and eco-friendly reversed-phase HPLC method with fluorescence detection was developed for simultaneous estimation of two co-administered antigout drugs (lesinurad and febuxostat) with diflunisal as a nonsteroidal anti-inflammatory drug. Unlike routine methodology, the developed method was optimized using analytical quality by design approach. A full factorial design was applied to optimize the effect of variable factors on chromatographic responses. The chromatographic separation was performed using isocratic elution on the Hypersil BDS C18 column at 40°C. The mobile phase consisted of acetonitrile:potassium phosphate buffer (30.0 mM; pH 5.5, 32.2:67.8% v/v) pumped at a flow rate of 1.0 mL/min and injection volume of 20.0 μL was employed. The proposed method was able to separate the ternary mixture in <10 min. The calibration curves of diflunisal, lesinurad, and febuxostat were linear over concentration ranges of 50.0-500.0, 50.0-700.0, and 20.0-700.0 ng/mL, respectively. Recovery percentages ranging from 98.1 to 101.3% with % relative standard deviation of <2% were obtained upon spiking to human plasma samples, indicating high bioanalytical applicability. Furthermore, the method was found to be excellent green when it was assessed according to Green Analytical Procedure Index and analytical Eco-Scale guidelines.

Micelle-Enhanced conventional and synchronous spectrofluorimetric methods for the simultaneous determination of lesinurad and febuxostat: Application to human plasma

A simple synchronous spectrofluorimetric method was developed for simultaneous determination of lesinurad and febuxostat. The investigated drugs were measured at 294 and 329 nm, respectively in the presence of each other without interference at Δλ of 50 nm (Method I). The different experimental parameters affecting the fluorescence intensities were carefully studied and optimized. The maximum synchronous fluorescence intensities were obtained at pH 6.5 using borate buffer and distilled water was used as a diluting solvent. Excellent linearity ranges were obtained using 20.0-500.0 ng mL^-1 and 1.0-80.0 ng mL^-1 for lesinurad and febuxostat, respectively. The method exhibited high sensitivity with detection limits down to 4.0 ng mL^-1 and 0.01 ng mL^-1 and quantitation limits down to 12.12 ng mL^-1 and 0.02 ng mL^-1, respectively. Recovery percentages ranged from 97.68 to 103.37% were obtained upon spiking of human plasma samples, indicating high bioanalytical applicability. Concerning Method II, methanolic solution of lesinurad was measured spectroflourimetrically with λ_excitation at 290 nm and λ_emission at 341 nm with high sensitivity using borate buffer of pH 6.5 and methanol as a diluting solvent. A considerable enhancement of the fluorescence intensity was achieved by using 1.0% w/v cetremide as a micellar system. The method was rectilinear over the concentration range of 3.0-80.0 ng mL^-1 with detection and quantitation limits down to 0.47 and 1.42 ng mL^-1, respectively. The developed method was efficiently applied for the estimation of the cited drug in spiked human plasma with high recovery percentages (98.58-101.64%). The methods were validated according to the ICH guidelines and further applied to commercial tablets with good results.

Simultaneous determination of elbasvir and grazoprevir in their pharmaceutical formulation by synchronous fluorescence spectroscopy coupled to dual wavelength method

In the present study, a sensitive, selective and accurate synchronous fluorescence spectroscopic method was utilized for simultaneous estimation of elbasvir and grazoprevir in their pharmaceutical formulation. The developed method based on measurement of the synchronous fluorescence intensity of the studied drugs at constant wavelength difference (Δλ) = 50 nm. Elbasvir can be determined directly at 312 nm without interference from grazoprevir. Grazoprevir can be determined by application of dual wavelength method by taking the difference in synchronous fluorescence intensity at 390 & 372 nm to remove interference from elbasvir. Calibration graphs were found to be linear over the concentration range of 50-700 ng/mL for elbasvir and 100-900 ng/mL for grazoprevir. The developed method was successfully applied to the quantitative analysis of the two drugs in Zepatier® tablets.

Application of different spectrofluorimetric methods for determination of lesinurad and allopurinol in pharmaceutical preparation and human plasma

Lesinurad and allopurinol combination is newly FDA approved for treatment of patients suffering from hyperuricemia associated with uncontrolled gout. In the present work, two different highly sensitive, selective and accurate fluorescence spectroscopic methods were developed for quantitative analysis of lesinurad and allopurinol in their pharmaceutical dosage form without any tedious operation procedure. Lesinurad was quantitatively analyzed based on its unique native fluorescence nature. Lesinurad fluorescence emission was quantitatively determined at 343 nm after excitation at 288 nm without any interference from allopurinol. Allopurinol, has free terminal secondary amino group, reacted with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole (NBDCl) through nucleophilic substitution mechanism forming highly fluorescent dark yellow fluorophore. Allopurinol was quantitavely analyzed based on measurement the emission fluorescence intensity of the fluorescent dark yellow fluorophore at 535 nm after excitation at 465 nm. Different parameters which affect the described methods of the studied drugs were carefully checked and optimized. Calibration graphs were found to be linear over the concentration range of 0.25-4.0 μg/mL for lesinurad and 0.2-20 μg/mL for allopurinol. The proposed methods were successfully applied for the quantitative analysis of the two drugs in Duzallo® pharmaceutical dosage form and spiked human plasma.

Development and validation of a highly sensitive second derivative synchronous fluorescence spectroscopic method for the simultaneous determination of elbasvir and grazoprevir in pharmaceutical preparation and human plasma

Elbasvir and grazoprevir combination has been newly approved for the treatment of patients infected with hepatitis C virus.

Derivative matrix-isopotential synchronous spectrofluorimetry: a solution for the direct determination of urinary δ-aminolevulinic acid

The excitation and emission spectra formulated 3D contours, from which isopotential trajectory was selected for the direct detection of urinary δ-aminolevulinic acid, using derivative matrix isopotential synchronous fluorescence spectrometry.