Preparation of amino acid chiral ionic liquid and visual chiral recognition of glutamine and phenylalanine enantiomers

In this paper, the amino acid chiral ionic liquid (AACIL) was prepared with L-phenylalanine and imidazole. It was characterized by CD, FT-IR, 1H NMR, and 13C NMR spectrum. The chiral recognition sensor was constructed with AACIL and Cu(II), which exhibited different chiral visual responses (solubility or color difference) to the enantiomers of glutamine (Gln) and phenylalanine (Phe). The effects of solvent, pH, time, temperature, metal ions, and other amino acids on visual chiral recognition were optimized. The minimum concentrations of Gln and Phe for visual chiral recognition were 0.20 mg/ml and 0.28 mg/ml, respectively. The mechanism of chiral recognition was investigated by FT-IR, TEM, SEM, TG, XPS, and CD. The location of the host-guest inclusion or molecular placement has been conformationally searched based on Gaussian 09 software.

Optimizing the method for removing MSNs templates using an ionic liquid ([C4mim]Cl)

The key step in preparing mesoporous silica is to remove the organic template agent, and the most common method used to achieve this goal is high-temperature calcination. However, this method has many disadvantages, one of which is that it reduces the silanol density on the surface of mesoporous silica, which affects its subsequent modification. Ionic liquids (ILs) are often used as extractants. In this work, the 1-butyl-3-methylimidazolium chloride ([C4mim]Cl) IL is considered, and the effects of its concentration, reaction temperature, and reaction time as well as HCl concentration on the extraction rate and silanol density were investigated using an IL extraction template agent (cetyl trimethyl ammonium bromide (CTAB)). The results show that an IL concentration of 10%, a reaction temperature of 120 °C, a reaction time of 12 h, and an HCl concentration of 1% are the best reaction parameters; with these parameters, the extraction rate and the silanol density were found to be 93.19% and 2.23%, respectively. The silanol density of mesoporous silica treated by calcination is only 0.81%. A higher silanol density provides more reaction sites, so that the modified mesoporous silica treated with the IL can be loaded with more Zn ions.

Adsorptive Membranes Incorporating Ionic Liquids (ILs), Deep Eutectic Solvents (DESs) or Graphene Oxide (GO) for Metal Salts Extraction from Aqueous Feed

Water scarcity is a significant concern, particularly in arid regions, due to the rapid growth in population, industrialization, and climate change. Seawater desalination has emerged as a conventional and reliable solution for obtaining potable water. However, conventional membrane-based seawater desalination has drawbacks, such as high energy consumption resulting from a high-pressure requirement, as well as operational challenges like membrane fouling and high costs. To overcome these limitations, it is crucial to enhance the performance of membranes by increasing their efficiency, selectivity, and reducing energy consumption and footprint. Adsorptive membranes, which integrate adsorption and membrane technologies, offer a promising approach to address the drawbacks of standalone membranes. By incorporating specific materials into the membrane matrix, composite membranes have demonstrated improved permeability, selectivity, and reduced pressure requirements, all while maintaining effective pollutant rejection. Researchers have explored different adsorbents, including emerging materials such as ionic liquids (ILs), deep eutectic solvents (DESs), and graphene oxide (GO), for embedding into membranes and utilizing them in various applications. This paper aims to discuss the existing challenges in the desalination process and focus on how these materials can help overcome these challenges. It will also provide a comprehensive review of studies that have reported the successful incorporation of ILs, DESs, and GO into membranes to fabricate adsorptive membranes for desalination. Additionally, the paper will highlight both the current and anticipated challenges in this field, as well as present prospects, and provide recommendations for further advancements.

Recent Progress in Processing Cellulose Using Ionic Liquids as Solvents

Cellulose-based materials have attracted great attention due to the demand for eco-friendly materials and renewable energy alternatives. An increase in the use of these materials is expected in the coming years due to progressive decline in the supply of petrochemicals. Based on the limitations of cellulose in terms of dissolution/processing, and focused on green chemistry, new cellulose production techniques are emerging, such as dissolution and functionalization in ionic liquids which are known as green solvents. This review summarizes the recent ionic liquids used in processing cellulose, including pretreatment, hydrolysis, functionalization, and conversion into bio-based platform chemicals. The recent literatures investigating the progress that ILs have made in their transition from academia to commercial application of cellulosic biomass are also reviewed.

Ni-based Multifunctional Catalysts derived from layered double hydroxides for Catalytic conversion of Cellulose to Polyols

The catalytic conversion of biomass into high value-added products has attracted wide attention, especially the efficient and selective conversion of cellulose into valuable chemicals and fuels. In this paper, using...

Fe-functionalized paramagnetic sporopollenin from pollen grains: one-pot synthesis using ionic liquids

The preparation of Fe-decorated sporopollenins was achieved using pollen grains and an ionic liquid as solvent and functionalizing agent. The integrity of the organic capsules was ascertained through scanning electron microscopy studies. The presence of Fe in the capsule was investigated using FT-IR, X-ray photoemission spectroscopy and energy-dispersive X-ray spectroscopy. Electron paramagnetic resonance and magnetization measurements allowed us to demonstrate the paramagnetic behavior of our Fe-functionalized sporopollenin. A few potential applications of pollen-based systems functionalized with magnetic metal ions via ionic liquids are discussed.

Exploiting pollen and sporopollenin for the sustainable production of microstructures

Pollen grains can be easily processed in order to obtain versatile and sustainable microcapsules.

pH-Responsive Carboxymethylcellulose Nanoparticles for 68Ga-WBC Labeling in PET Imaging

Carboxymethylcellulose (CMC) is a well-known pharmaceutical polymer, recently gaining attention in the field of nanomedicine, especially as a polyelectrolyte agent for the formation of complexes with oppositely charged macromolecules. Here, we report on the application of pH-sensitive pharmaceutical grade CMC-based nanoparticles (NP) for white blood cells (WBC) PET imaging. In this context and as an alternative to ^99mTc-HMPAO SPECT labeling, the use of ⁶⁸Ga³⁺ as PET radionuclide was investigated since, at early time points, it could provide the greater spatial resolution and patient convenience of PET tomography over SPECT clinical practices. Two operator-friendly kit-type formulations were compared, with the intention of radiolabeling within a short time (10 min), under mild conditions (physiological pH, room temperature) and in agreement with the actual clinically applied guidelines. NP were labeled by directly using ⁶⁸Ga³⁺ eluted in HCL 0.05 N, from hospital suited ⁶⁸Ge/⁶⁸Ga generator and in absence of chelator. The first kit type approach involved the application of ⁶⁸Ga³⁺ as an ionotropic gelation agent for in-situ forming NP. The second kit type approach concerned the re-hydration of a proper freeze-dried injectable NP powder. pH-sensitive NP with 250 nm average diameter and 80% labeling efficacy were obtained. The NP dispersant medium, including a cryoprotective agent, was modulated in order to optimize the Zeta potential value (−18 mV), minimize the NP interaction with serum proteins and guarantee a physiological environment for WBC during NP incubation. Time-dependent WBC radiolabeling was correlated to NP uptake by using both confocal and FT-IR microscopies. The ready to use lyophilized NP formulation approach appears promising as a straightforward ⁶⁸Ga-WBC labeling tool for PET imaging applications.

Unexpected Intrinsic Lability of Thiol-Functionalized Carboxylate Imidazolium Ionic Liquids

New thiol-functionalized carboxylate ionic liquids (ILs), varying both for the cation and for the anion structures, have been prepared as new potential redox switching systems by reacting either 3-mercapto propionic acid (3-MPA) or N-acetyl-cysteine (NAC) with commercially available methyl carbonate ILs. Different ratios of thiol/disulfide ILs were obtained depending both on the acid employed in the neutralization reaction and on the reaction conditions used. Surprisingly, the imidazolium ILs displayed limited thermal stability which resulted in the formation of an imidazole 2-thione and a new sulfide ionic liquid. Conversely, the formation of the imidazole 2-thione was not observed when phosphonium disulfide ILs were heated, thus confirming the involvement of the imidazolium ring in an unexpected side reaction. An insight into the mechanism of the decomposition has been provided by means of DFT calculations.

Remarkable Effect of [Li(G4)]TFSI Solvate Ionic Liquid (SIL) on the Regio- and Stereoselective Ring Opening of α-Gluco Carbasugar 1,2-Epoxides

Carba analogues of biologically relevant natural carbohydrates are promising structures for the development of future drugs endowed with enhanced hydrolytic stability. An open synthetic challenge in this field is the optimization of new methodologies for the stereo- and regioselective opening of α-gluco carbasugar 1,2-epoxides that allow for the preparation of pseudo mono- and disaccharides of great interest. Therefore, we investigated the effect of Lewis acids and solvate ionic liquids (SILs) on the epoxide ring opening of a model substrate. Of particular interest was the complete stereo- and regioselectivity, albeit limited to simple nucleophiles, toward the desired C(1) isomer that was observed using LiClO4. The results obtained with SILs were also remarkable. In particular, Li[NTf2]/tetraglyme ([Li(G4)]TFSI) was able to function as a Lewis acid and to direct the attack of the nucleophile preferentially at the pseudo anomeric position, even with a more complex and synthetically interesting nucleophile. The regioselectivity observed for LiClO4 and [Li(G4)]TFSI was tentatively ascribed to the formation of a bidentate chelating system, which changed the conformational equilibrium and ultimately permitted a trans-diaxial attack on C(1). To the best of our knowledge, we report here the first case in which SILs were successfully employed in a ring-opening process of epoxides.

Comparative evaluation of antimicrobial activity of different types of ionic liquids

In order to identify most suitable ionic liquids (ILs) for potential applications in infection prevention and control, in the present study we comparatively evaluated the antimicrobial potency and hemolytic activity of 15 ILs, including 11 previously described and four newly synthesized ILs, using standard microbiological procedures against Gram-positive and Gram-negative bacteria. ILs showing the lowest minimum inhibitory concentration (MIC) were tested for their hemolytic activity. Three ILs characterized by low MIC values and low hemolytic activity, namely 1-methyl-3-dodecylimidazolium bromide, 1-dodecyl-1-methylpyrrolidinium bromide, and 1-dodecyl-1-methylpiperidinium bromide were further investigated to determine their minimum bactericidal concentration (MBC), and their ability to inhibit biofilm formation by Staphylococcus aureus or Pseudomonas aeruginosa. Killing kinetics results revealed that both Gram-positive and Gram-negative bacteria are rapidly killed after exposure to MBC of the selected ILs. Furthermore, the selected ILs efficiently inhibited biofilm formation by S. aureus or P. aeruginosa. To our knowledge, this is the first systematic study investigating the antimicrobial potential of different types of ionic liquids using standard microbiological procedures. In the overall, the selected ILs showed low hemolytic and powerful antimicrobial activity, and efficient inhibition of biofilm formation, especially against S. aureus, suggesting their possible application as anti-biofilm agents.

Insights into the levulinate-based ionic liquid class: synthesis, cellulose dissolution evaluation and ecotoxicity assessment

New levulinate ionic liquids (ILs) were able to dissolve cellulose in high amounts. The ecotoxicity profiles of these new ILs were also assessed.

Levulinate amidinium protic ionic liquids (PILs) as suitable media for the dissolution and levulination of cellulose

Levulinate protic ionic liquids allow for the dissolution and the levulination of their parent polysaccharide.

An insight into the intermolecular vibrational modes of dicationic ionic liquids through far-infrared spectroscopy and DFT calculations

Dicationic ionic liquids (DILs) are a subclass of the ionic liquid (IL) family and are characterized by two cationic head groups linked by means of a spacer. While DILs are increasingly attracting interest due to their peculiar physico-chemical properties, there is still a lack of understanding of their intermolecular interactions. Herein, we report our investigations on the intermolecular vibrational modes of two bromide DILs and of a bistriflimide DIL. The minimal possible neutral cluster of ions was studied as a simplified model of these systems and was optimized at the DFT level. Normal modes of two sandwich-like conformers were then calculated using the harmonic approximation with analytical computation of the second derivatives of molecular energy with respect to the atomic coordinates. The calculated spectra were compared to far-infrared experimental spectra and two groups of peaks over three, for the two bromide DILs, and three over five, for the Tf₂N⁻ DIL, were described by the proposed neutral cluster model. Therefore, this model represents a reliable and computationally affordable model for the exploration of the intermolecular interactions of this kind of system.

The minimal cluster of ions represents a reliable and computationally affordable model for the exploration of the intermolecular interactions of dicationic ionic liquids.

Prediction of Thermodynamic Properties of Levulinic Acid via Molecular Simulation Techniques

Second-generation biofuels are a complex mixture of organic compounds that can be further processed to hydrocarbon fuels and other valuable chemicals. One such chemical is levulinic acid (IUPAC name: 4-oxo pentanoic acid), which is a highly versatile ketoacid obtained from cellulose present in agricultural byproducts. For oxygen-containing compounds that decompose at elevated temperatures and pressures, determining the vapor-liquid equilibria data at high temperatures via the experimental route may be challenging. The molecular simulation approach is a cost-effective tool to obtain the necessary data while also allowing us to understand the microscopic origins of macroscopic observable properties. We have employed the transferable potential for phase equilibria-united atom force field to describe the interactions in this system with the parameters for a torsional interaction that are not reported in the literature (levulinic acid is a ketoacid) being determined from density functional theory calculations. We have verified our parameterization via density computations in the isothermal-isobaric ensemble and by comparing our simulation results with the corresponding data from experiments reported in the literature. We have performed grand-canonical transition-matrix Monte Carlo simulations in the temperature range from 580 to 690 K to estimate the vapor-liquid coexistence curves in the temperature-density plane and the Clapeyron plots. From this data, the critical point (T C = 755 K, ρC = 285.4 kg/m3, and P C = 30.57 bar) has been estimated, and this may be used as input to the equations of state employed in process simulation software for design of industrial separation processes including those for "biorefining". As levulinic acid is a "ketoacid", hydrogen bonding occurs, and the liquid phase structure has also been studied using radial distribution functions.

Chemocatalytic Conversion of Cellulose into Key Platform Chemicals

Chemocatalytic transformation of lignocellulosic biomass to value-added chemicals has attracted global interest in order to build up sustainable societies. Cellulose, the first most abundant constituent of lignocellulosic biomass, has received extensive attention for its comprehensive utilization of resource, such as its catalytic conversion into high value-added chemicals and fuels (e.g., HMF, DMF, and isosorbide). However, the low reactivity of cellulose has prevented its use in chemical industry due to stable chemical structure and poor solubility in common solvents over the cellulose. Recently, homogeneous or heterogeneous catalysis for the conversion of cellulose has been expected to overcome this issue, because various types of pretreatment and homogeneous or heterogeneous catalysts can be designed and applied in a wide range of reaction conditions. In this review, we show the present situation and perspective of homogeneous or heterogeneous catalysis for the direct conversion of cellulose into useful platform chemicals.