A highly sensitive FET-type aptasensor using flower-like MoS2 nanospheres for real-time detection of arsenic(iii)

Conjugated Polymers for Aptasensing Applications

Rapid and specific assaying of molecules that report on a pathophysiological condition, environmental pollution, or drug concentration is pivotal for establishing efficient and accurate diagnostic systems. One of the main components required for the construction of these systems is the recognition element (receptor) that can identify target analytes. Oligonucleotide switching structures, or aptamers, have been widely studied as selective receptors that can precisely identify targets in different analyzed matrices with minimal interference from other components in an antibody-like recognition process. These aptasensors, especially when integrated into sensing platforms, enable a multitude of sensors that can outperform antibody-based sensors in terms of flexibility of the sensing strategy and ease of deployment to areas with limited resources. Research into compounds that efficiently enhance signal transduction and provide a suitable platform for conjugating aptamers has gained huge momentum over the past decade. The multifaceted nature of conjugated polymers (CPs), notably their versatile electrical and optical properties, endows them with a broad range of potential applications in optical, electrical, and electrochemical signal transduction. Despite the substantial body of research demonstrating the enhanced performance of sensing devices using doped or nanostructure-embedded CPs, few reviews are available that specifically describe the use of conjugated polymers in aptasensing. The purpose of this review is to bridge this gap and provide a comprehensive description of a variety of CPs, from a historical viewpoint, underpinning their specific characteristics and demonstrating the advances in biosensors associated with the use of these conjugated polymers.

Fabrication of MoS2/C60 Nanolayer Field-Effect Transistor for Ultrasensitive Detection of miRNA-155

As a major public health issue, early cancer detection is of great significance. A field-effect transistor (FET) based on an MoS₂/C₆₀ composite nanolayer as the channel material enhances device performance by adding a light source, allowing the ultrasensitive detection of cancer-related miRNA. In this work, atomic layer deposition (ALD) was used to deposit MoS₂ layer by layer, and C₆₀ was deposited by an evaporation coater to obtain a composite nanolayer with good surface morphology as the channel material of the FET. Based on the good absorption of C₆₀ by blue-violet light, a 405 nm laser was selected to irradiate the channel material, improving the function of FET biosensors. A linear detection window from 10 pM to 1 fM with an ultralow detection limit of 5.16 aM for miRNA-155 was achieved.

Aptamer-based NanoBioSensors for seafood safety

Chemical and biological contaminants are of primary concern in ensuring seafood safety. Rapid detection of such contaminants is needed to keep us safe from being affected. For over three decades, immunoassay (IA) technology has been used for the detection of contaminants in seafood products. However, limitations inherent to antibody generation against small molecular targets that cannot elicit an immune response, along with the instability of antibodies under ambient conditions greatly limit their wider application for developing robust detection and monitoring tools, particularly for non-biomedical applications. As an alternative, aptamer-based biosensors (aptasensors) have emerged as a powerful yet robust analytical tool for the detection of a wide range of analytes. Due to the high specificity of aptamers in recognising targets ranging from small molecules to large proteins and even whole cells, these have been suggested to be viable molecular recognition elements (MREs) in the development of new diagnostic and biosensing tools for detecting a wide range of contaminants including heavy metals, antibiotics, pesticides, pathogens and biotoxins. In this review, we discuss the recent progress made in the field of aptasensors for detection of contaminants in seafood products with a view of effectively managing their potential human health hazards. A critical outlook is also provided to facilitate translation of aptasensors from academic laboratories to the mainstream seafood industry and consumer applications.

Cell-free arsenic biosensors with applied nanomaterials: critical analysis

Arsenic is a ubiquitously found metalloid in our ecosystem because of natural and anthropogenic activities. People exposed to a higher level of arsenic become susceptible to several disorders, including cancer. According to current statistics, the population chronically exposed to arsenic has surpassed 200 million. Therefore, its detection in our environment is of great importance. There are many analytical techniques for the assessment of arsenic in different kinds of environmental samples. Among these techniques, the biosensor is considered a convenient platform and a widely applied analytical device for rapid qualitative and quantitative analysis in the field of environmental monitoring, food safety, and disease diagnosis. Today, there is a trend of including nanomaterials in sensors and biosensors because it empowers researchers to explore new arsenic detection methods and to enhance their analytical capabilities. In this review article, we summarized the latest developments in arsenic biosensors in particular with emphasis on the works based on cell-free approaches that are protein/enzyme-based, DNA-based, and aptamer-based utilizing various transduction platforms. In the meantime, we compared the capabilities that were related to these cell-free arsenic biosensors. This review article also highlights the development and application of novel nanomaterials for arsenic detection.

Two-Dimensional Field-Effect Transistor Sensors: The Road toward Commercialization

The evolutionary success in information technology has been sustained by the rapid growth of sensor technology. Recently, advances in sensor technology have promoted the ambitious requirement to build intelligent systems that can be controlled by external stimuli along with independent operation, adaptivity, and low energy expenditure. Among various sensing techniques, field-effect transistors (FETs) with channels made of two-dimensional (2D) materials attract increasing attention for advantages such as label-free detection, fast response, easy operation, and capability of integration. With atomic thickness, 2D materials restrict the carrier flow within the material surface and expose it directly to the external environment, leading to efficient signal acquisition and conversion. This review summarizes the latest advances of 2D-materials-based FET (2D FET) sensors in a comprehensive manner that contains the material, operating principles, fabrication technologies, proof-of-concept applications, and prototypes. First, a brief description of the background and fundamentals is provided. The subsequent contents summarize physical, chemical, and biological 2D FET sensors and their applications. Then, we highlight the challenges of their commercialization and discuss corresponding solution techniques. The following section presents a systematic survey of recent progress in developing commercial prototypes. Lastly, we summarize the long-standing efforts and prospective future development of 2D FET-based sensing systems toward commercialization.

Ten Years Progress of Electrical Detection of Heavy Metal Ions (HMIs) Using Various Field-Effect Transistor (FET) Nanosensors: A Review

Heavy metal pollution remains a major concern for the public today, in line with the growing population and global industrialization. Heavy metal ion (HMI) is a threat to human and environmental safety, even at low concentrations, thus rapid and continuous HMI monitoring is essential. Among the sensors available for HMI detection, the field-effect transistor (FET) sensor demonstrates promising potential for fast and real-time detection. The aim of this review is to provide a condensed overview of the contribution of certain semiconductor substrates in the development of chemical and biosensor FETs for HMI detection in the past decade. A brief introduction of the FET sensor along with its construction and configuration is presented in the first part of this review. Subsequently, the FET sensor deployment issue and FET intrinsic limitation screening effect are also discussed, and the solutions to overcome these shortcomings are summarized. Later, we summarize the strategies for HMIs' electrical detection, mechanisms, and sensing performance on nanomaterial semiconductor FET transducers, including silicon, carbon nanotubes, graphene, AlGaN/GaN, transition metal dichalcogenides (TMD), black phosphorus, organic and inorganic semiconductor. Finally, concerns and suggestions regarding detection in the real samples using FET sensors are highlighted in the conclusion.

Silica and graphene mediate arsenic detection in mature rice grain by a newly patterned current-volt aptasensor

Arsenic is a major global threat to the ecosystem. Here we describe a highly accurate sensing platform using silica nanoparticles/graphene at the surface of aluminum interdigitated electrodes (Al IDE), able to detect trace amounts of arsenic(III) in rice grain samples. The morphology and electrical properties of fabricated Al IDEs were characterized and standardized using AFM, and SEM with EDX analyses. Micrometer scale Al IDEs were fabricated with silicon, aluminum, and oxygen as primary elements. Validation of the bare Al IDE with electrolyte fouling was performed at different pH levels. The sensing surface was stable with no electrolyte fouling at pH 7. Each chemical modification step was monitored with current-volt measurement. The surface chemical bonds were characterized by fourier transform infrared spectroscopy (FTIR) and revealed different peaks when interacting with arsenic (1600-1000 cm^-1). Both silica nanoparticles and graphene presented a sensitive limit of detection as measured by slope calibration curves at 0.0000001 pg/ml, respectively. Further, linear regression was established using ΔI (A) = 3.86 E^-09 log (Arsenic concentration) [g/ml] + 8.67 E^-08 [A] for silica nanoparticles, whereas for graphene Y = 3.73 E^-09 (Arsenic concentration) [g/ml] + 8.52 E^-08 on the linear range of 0.0000001 pg/ml to 0.01 pg/ml. The R² for silica (0.96) and that of graphene (0.94) was close to the maximum (1). Modification with silica nanoparticles was highly stable. The potential use of silica nanoparticles in the detection of arsenic in rice grain extract can be attributed to their size and stability.

Unique photoluminescence response of MoS2quantum dots over a wide range of As (III) in aqueous media

We report the solvothermal synthesis of MoS₂based quantum dots (QDs) and the performance evaluation of bare QDs for the detection of aqueous As (III) oxidative state at room temperature and neutral pH over a vast range (0.1-1000 ppb). Concentration-dependent photoluminescence (PL) of the QDs enhances up to 50 ppb and then suppresses till 1000 ppb. It shows two distinctive slopes for enhancement and suppression. The enhancement is possibly due to the passivation of trap states or defects. The formation of tiny glassy As₂S₃particles on the QD surface may be the possible reason for suppression. The pattern of optical absorption of QDs follows the similar patterns of PL. Still, it shows an enhanced absorbance in the near UV range below ≤300 nm, which increases with As (III) concentration up to 50 ppb and then decreases following the PL pattern. The MoS₂QDs were characterized by using transmission electron microscopy, x-ray diffraction, UV-Vis, and PL spectroscopy. The enhancement and suppression results were excellently fitted with the modified Stern-Volmer equation. The detection of arsenic is possible using these linear fit equations as calibration curves.

Recent Advances in Nanomaterial-Based Aptasensors in Medical Diagnosis and Therapy

Rapid and accurate diagnosis of various biomarkers associated with medical conditions including early detection of viruses and bacteria with highly sensitive biosensors is currently a research priority. Aptamer is a chemically derived recognition molecule capable of detecting and binding small molecules with high specificity and its fast preparation time, cost effectiveness, ease of modification, stability at high temperature and pH are some of the advantages it has over traditional detection methods such as High Performance Liquid Chromatography (HPLC), Enzyme-linked Immunosorbent Assay (ELISA), Polymerase Chain Reaction (PCR). Higher sensitivity and selectivity can further be achieved via coupling of aptamers with nanomaterials and these conjugates called "aptasensors" are receiving greater attention in early diagnosis and therapy. This review will highlight the selection protocol of aptamers based on Traditional Systematic Evolution of Ligands by EXponential enrichment (SELEX) and the various types of modified SELEX. We further identify both the advantages and drawbacks associated with the modified version of SELEX. Furthermore, we describe the current advances in aptasensor development and the quality of signal types, which are dependent on surface area and other specific properties of the selected nanomaterials, are also reviewed.

From Small Molecules Toward Whole Cells Detection: Application of Electrochemical Aptasensors in Modern Medical Diagnostics

This paper focuses on the current state of art as well as on future trends in electrochemical aptasensors application in medical diagnostics. The origin of aptamers is presented along with the description of the process known as SELEX. This is followed by the description of the broad spectrum of aptamer-based sensors for the electrochemical detection of various diagnostically relevant analytes, including metal cations, abused drugs, neurotransmitters, cancer, cardiac and coagulation biomarkers, circulating tumor cells, and viruses. We described also possible future perspectives of aptasensors development. This concerns (i) the approaches to lowering the detection limit and improvement of the electrochemical aptasensors selectivity by application of the hybrid aptamer-antibody receptor layers and/or nanomaterials; and (ii) electrochemical aptasensors integration with more advanced microfluidic devices as user-friendly medical instruments for medical diagnostic of the future.

'Template-free' hierarchical MoS2 foam as a sustainable 'green' scavenger of heavy metals and bacteria in point of use water purification

Molybdenum disulfide (MoS₂), with its unique optical and electrical properties, has been explored for a variety of applications in the recent past. Still, its capabilities in point-of-use heavy metal ion removal remain to be explored. Herein, for the first time using a facile approach, we fabricated three-dimensional (3D) MoS₂ foam from exfoliated single to few-layered MoS₂ sheets for the selective exclusion of heavy metals and stringent bactericidal response. This foam was able to exclude 99.9% of Pb(ii) and 98.7% of As(iii) instantaneously and reduced more than 98% of bacteria E. coli. Moreover, the foam exhibits selective toxicity towards bacterial cells while showing no observable toxicity towards mammalian cells. The foam can be recycled and reused for at least five cycles under accelerated conditions and thus can be used for a promising non-cytotoxic, facile, and environmentally benign process for inline water remediation to remove heavy metal ions from the feed and as a potential antibacterial agent.

Solution-gated transistors of two-dimensional materials for chemical and biological sensors: status and challenges

Two-dimensional (2D) materials have been the focus of materials research for many years due to their unique fascinating properties and large specific surface area (SSA). They are very sensitive to the analytes (ions, glucose, DNA, protein, etc.), resulting in their wide-spread development in the field of sensing. New 2D materials, as the basis of applications, are constantly being fabricated and comprehensively studied. In a variety of sensing applications, the solution-gated transistor (SGT) is a promising biochemical sensing platform because it can work at low voltage in different electrolytes, which is ideal for monitoring body fluids in wearable electronics, e-skin, or implantable devices. However, there are still some key challenges, such as device stability and reproducibility, that must be faced in order to pave the way for the development of cost-effective, flexible, and transparent SGTs with 2D materials. In this review, the device preparation, device physics, and the latest application prospects of 2D materials-based SGTs are systematically presented. Besides, a bold perspective is also provided for the future development of these devices.

Environmental Analysis with 2D Transition-Metal Dichalcogenide-Based Field-Effect Transistors

Field-effect transistors (FETs) present highly sensitive, rapid, and in situ detection capability in chemical and biological analysis. Recently, two-dimensional (2D) transition-metal dichalcogenides (TMDCs) attract significant attention as FET channel due to their unique structures and outstanding properties. With the booming of studies on TMDC FETs, we aim to give a timely review on TMDC-based FET sensors for environmental analysis in different media. First, theoretical basics on TMDC and FET sensor are introduced. Then, recent advances of TMDC FET sensor for pollutant detection in gaseous and aqueous media are, respectively, discussed. At last, future perspectives and challenges in practical application and commercialization are given for TMDC FET sensors. This article provides an overview on TMDC sensors for a wide variety of analytes with an emphasize on the increasing demand of advanced sensing technologies in environmental analysis.

A new CQDs/f-MWCNTs/GO nanocomposite electrode for arsenic (10−12M) quantification in bore-well water and industrial effluents

Strategic combination ofCQDs/f-MWCNTs/GO/GCE for pico-molar arsenic sensing.

Nanomaterial-based aptamer sensors for arsenic detection

Arsenic (As) is a highly toxic contaminant in the environment and a serious carcinogen for the human being. The toxicity of arsenic significantly threatens environmental and human health. The effective removing technology for arsenic remains challenging, and one of the reasons is due to the lack of powerful detection method in the complex environmental matrix. There is thus an urgent need to develop novel analytical methods for arsenic, preferably with the potential for the field-testing. To combat arsenic pollution and maintain a healthy environment and eco-system, many analytical methods have been developed for arsenic detection in various samples. Among these strategies, biosensors hold great promise for rapid detection of arsenic, in particular, nanomaterials-based aptamer sensors have attracted significant attention due to their simplicity, high sensitivity and rapidness. In this paper, we reviewed the recent development and applications of aptamer sensors (aptasensors) based-on nanomaterial for arsenic detection, in particular with emphasis on the works using optical and electrochemical technologies. We also discussed the recent novel technology in aptasensors development for arsenic detection, including nucleic acid amplification for signal enhancement and device integration for the portability of arsenic sensors. We are hoping this review could inspire further researches in developing novel nanotechnologies based aptasensors for possible on-site detection of arsenic.

Field-Effect Transistor Based on an in Situ Grown Metal-Organic Framework Film as a Liquid-Gated Sensing Device

Ni₃(HITP)₂, a novel and promising two-dimensional metal-organic framework (MOF) material, has been utilized in the areas of catalysis, sensing, and supercapacitors. It is very suitable for preparing field-effect transistor (FET) devices due to its good conductivity, porous structure, as well as easy film formation. Nevertheless, there is a challenge to transfer membrane materials undamaged to the substrates. Here, we reported a simple approach to fabricate the Ni-MOF-based FET with an in situ grown Ni₃(HITP)₂ membrane as the channel material of the FET. With this method, we obtained a large-area, dense, and uniform film composed of thin sheets, and the thickness and density of the MOF film were tunable through changing the reaction time. The as-prepared Ni-MOF-FET had a good mobility of 45.4 cm² V^-1 s^-1 and on/off current ratio of 2.29 × 10³. Moreover, this FET served as a liquid-gated device for the first time with bipolar behavior and good response to the gluconic acid at the range from 10^-6 to 10^-3 g/mL, verifying the potential of the Ni-MOF-FET as biosensors.

Changing the Blood Test: Accurate Determination of Mercury(II) in One Microliter of Blood Using Oriented ZnO Nanobelt Array Film Solution-Gated Transistor Chips

The measurement of ultralow concentrations of heavy metal ions (HMIs) in blood is challenging. A new strategy for the determination of mercury ions (Hg²⁺ ) based on an oriented ZnO nanobelt (ZnO-NB) film solution-gated field-effect transistor (FET) chip is adopted. The FET chips are fabricated with ZnO-NB film channels with different orientations utilizing the Langmuir-Blodgett (L-B) assembly technique. The combined simulation and I-V behavior results show that the nanodevice with ZnO-NBs parallel to the channel has exceptional performance. The sensing capability of the oriented ZnO-NB film FET chips corresponds to an ultralow minimum detectable level (MDL) of 100 × 10^-12 m in deionized water due to the change in the electrical double layer (EDL) arising from the synergism of the field-induced effect and the specific binding of Hg²⁺ to the thiol groups (-SH) on the film surface. Moreover, the prepared FET chips present excellent selectivity toward Hg²⁺ , excellent repeatability, and a rapid response time (less than 1 s) for various Hg²⁺ concentrations. The sensing performance corresponds to a low MDL of 10 × 10^-9 m in real samples of a drop of blood.

Fabrication of N-doped multidimensional carbon nanofibers for high-performance cortisol biosensors

Cortisol is an hormone that regulates blood pressure, glucose levels and carbohydrate metabolism in humans. Abnormal secretion of cortisol can cause various symptoms closely linked to psychological and physical health. In this study, high-performance field-effect transistor (FET)-based biosensors for cortisol detection were fabricated from N-doped multidimensional carbon nanofibers. Nanofiber morphology was controlled by tailoring the pressure conditions during vapor deposition polymerization (VDP). Thereafter, conductive channels of FET were completed by thermal annealing, acid treatment, and antibody attachment. Changes associated with chemical processes were characterized by various instruments. The resulting transducers exhibited a rapid response toward cortisol molecules with accurate selectivity, stable reusability, and high sensitivity. Minimum detection level were as low as 100 aM with a wide linear detection range of 100 aM to 10 nM due to the large surface area of the transducer and a correspondingly high number of antibody labels. The response and applicability of these cortisol biosensors were also assessed using saliva as a test matrix.

A comprehensive review on nano-molybdenum disulfide/DNA interfaces as emerging biosensing platforms

The development of nucleic acid-based portable platforms for the real-time analysis of diseases has attracted considerable scientific and commercial interest. Recently, 2D layered molybdenum sulfide (2D MoS₂ from here on) nanosheets have shown great potential for the development of next-generation platforms for efficient signal transduction. Through combination with DNA as a biorecognition medium, MoS₂ nanostructures have opened new opportunities to design and construct highly sensitive, specific, and commercially viable sensing devices. The use of specific short ssDNA sequences like aptamers has been proven to bind well with the unique transduction properties of 2D MoS₂ nanosheets to realize aptasensing devices. Such sensors can be operated on the principles of fluorescence, electro-cheumuluminescence, and electrochemistry with many advantageous features (e.g., robust biointerfacing through various conjugation chemistries, facile sensor assembly, high stability with regard to temperature/pH, and high affinity to target). This review encompasses the state of the art information on various design tactics and working principles of MoS₂/DNA sensor technology which is emerging as one of the most sought-after and valuable fields with the advent of nucleic acid inspired devices. To help achieve a new milestone in biosensing applications, great potential of this emerging technique is described further with regard to sensitivity, specificity, operational convenience, and versatility.

Practical Application of Aptamer-Based Biosensors in Detection of Low Molecular Weight Pollutants in Water Sources

Water pollution has become one of the leading causes of human health problems. Low molecular weight pollutants, even at trace concentrations in water sources, have aroused global attention due to their toxicity after long-time exposure. There is an increased demand for appropriate methods to detect these pollutants in aquatic systems. Aptamers, single-stranded DNA or RNA, have high affinity and specificity to each of their target molecule, similar to antigen-antibody interaction. Aptamers can be selected using a method called Systematic Evolution of Ligands by EXponential enrichment (SELEX). Recent years we have witnessed great progress in developing aptamer selection and aptamer-based sensors for low molecular weight pollutants in water sources, such as tap water, seawater, lake water, river water, as well as wastewater and its effluents. This review provides an overview of aptamer-based methods as a novel approach for detecting low molecular weight pollutants in water sources.

An ultrasensitive detection of miRNA-155 in breast cancer via direct hybridization assay using two-dimensional molybdenum disulfide field-effect transistor biosensor

MicroRNAs (miRNAs), critical biomarkers of acute and chronic diseases, play key regulatory roles in many biological processes. As a result, robust assay platforms to enable an accurate and efficient detection of low-level miRNAs in complex biological samples are of great significance. In this work, a label-free and direct hybridization assay using molybdenum disulfide (MoS₂) field-effect transistor (FET) biosensor has been developed for ultrasensitive detection of miRNA-155 as a breast cancer biomarker in human serum and cell-line samples. MoS₂, the novel 2D layered material with excellent physical and chemical properties, was prepared through sequential solvent exchange method and was used as an active channel material. MoS₂ was comprehensively characterized by spectroscopic and microscopic methods and it was applied for fabrication of FET device by drop-casting MoS₂ flacks suspension onto the FET surface. MoS₂ FET device showed a relatively low subthreshold swing of 48.10mV/decade and a high mobility of 1.98 × 10³cm²V^-1s^-1. Subsequently, probe miRNA-155 strands were immobilized on the surface of the MoS₂ FET device. Under optimized conditions detection limit of 0.03fM and concentration range 0.1fM to 10nM were achieved. The developed biosensor not only was capable to identification of fully matched versus one-base mismatch miRNA-155 sequence, but also it could detect target miRNA-155 in spiked real human serum and extracts from human breast cancer cell-line samples. This approach paves a way for label-free, early detection of miRNA as a biomarker in cancer diagnostics with very high sensitivity and good specificity, thus offering a significant potential for clinical application.

Green synthesis of surface-passivated carbon dots from the prickly pear cactus as a fluorescent probe for the dual detection of arsenic(iii) and hypochlorite ions from drinking water

Efforts were made to develop a simple new approach for the green synthesis of surface-passivated carbon dots from edible prickly pear cactus fruit as the carbon source by a one-pot hydrothermal route. Glutathione (GSH) was passivated on the surface of the CDs to form a sensor probe, which exhibited excellent optical properties and water solubility. The prepared sensor was successfully characterized by UV-visible spectrophotometry, fluorescence spectrophotometry, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The simple sensing platform developed by the GSH-CDs was highly sensitive and selective with a “turn-off” fluorescence response for the dual detection of As³⁺ and ClO⁻ ions in drinking water. This sensing system exhibited effective quenching in the presence of As³⁺ and ClO⁻ ions to display the formation of metal complexes and surface interaction with an oxygen functional group. The oxygen-rich GSH-CDs afforded a better selectivity for As³⁺/ClO⁻ ions over other competitive ions. The fluorescence quenching measurement quantified the concentration range as 2–12 nM and 10–90 μM with the lower detection limit of 2.3 nM and 0.016 μM for the detection of As³⁺ and ClO⁻ ions, respectively. Further, we explored the potential applications of this simple, reliable, and cost-effective sensor for the detection of As³⁺/ClO⁻ ions in environmental samples for practical analysis.

Efforts were made to develop a simple new approach for the green synthesis of surface-passivated carbon dots from edible prickly pear cactus fruit as the carbon source by a one-pot hydrothermal route.

Flower-Like Molybdenum Disulfide for Polarity-Triggered Accumulation/Release of Small Molecules

Flower-like molybdenum disulfide (MoS₂) with rich edge sites has been prepared by the hydrothermal method. The edge sites possess polarity due to the noncentrosymmetric Mo-S on exposed (100) facets and thus show a strong electrostatic attraction toward polar species. The flower-like MoS₂ can be used as small-molecule carriers for the model drug, Rhodamine B (RhB). The results prove that flower-like MoS₂ have fast adsorption kinetics and perform a switchable accumulation/release with response to the solvent polarity. An outstanding reusability can be found in flower-like MoS₂ due to little cargo retention, and the recycle of adsorption can be repeated 100 times with above 88.5% of the adsorption capacity retained. The flower-like MoS₂ with solvent polarity-triggered loading/release can be extended to controlled release and color switch of display.