Direct versus ligand-exchange synthesis of [PtAg28(BDT)12(TPP)4]4- nanoclusters: effect of a single-atom dopant on the optoelectronic and chemical properties

Structural Changes in Atomically Precise Ag29 Nanoclusters upon Sequential Attachment and Detachment of Secondary Ligands

Elucidating the structural dynamics of ligand-stabilized noble metal nanoclusters (NCs) is critical for understanding their properties and for developing applications. Ligand rearrangement at NC surfaces is an important contributor to structural change. In this study, we investigate the dynamic behavior of ligand-protected [Ag29(L)12]3- NC's (L = 1,3-benzenedithiol) interacting with secondary ligand 2,2'-[1,4-phenylenebis (methylidynenitrilo)] bis[benzenethiol] (referred to as L'). We specifically focus on the structural characteristics of NC-based adducts [Ag29(L)12]L'n3- where n ranges from 1 to 4. This is probed experimentally by using a combination of ultraviolet-visible (UV-vis) spectroscopy, high-resolution electrospray ionization mass spectrometry (ESI MS), and ion mobility mass spectrometry (IM MS) coupled with collision-induced dissociation (MS2 IMS). Density functional theory (DFT) calculations infer comparatively weak noncovalent interactions between the NCs and attached secondary ligands consistent with the fragmentation behavior and experimentally determined collision cross-sections (CCSs), which show a monotonic CCS increase of [Ag29(L)12]L'n3- with an increasing number of L' (n = 1-4). From a detailed analysis of the predicted structures, we infer progressive expansion of the Ag-S staple framework of the precursor NC as secondary ligands are added. Interestingly, detachment of L' from gas-phase [Ag29(L)12]L'n3- by collisional heating yields structures which retain "footprints" of the detached secondary ligands on a millisecond time scale.

Sulfide-mediated growth of NIR luminescent Pd/Ag atomically precise nanoclusters

An essential feature of coinage metal nanoclusters (NCs) is their photoluminescence (PL), which spans a wide range of wavelengths from visible to near-infrared regions (NIR-I/II). A key challenge for synthetic chemists is to develop materials capable of efficient spectral change with maximum efficiency. Herein, we report novel dithiolate-protected bimetallic Pd-Ag NCs of the type [PdAg16S2{S2P(OR)2}12] (R = iPr, 1Pr and iBu, 1Bu) and [Pd6Ag14S{S2P(OiBu)2}12] (2Bu). Sulfide-mediated expansions of NCs result in unique PL in the NIR-I region for 1Pr and 1Bu (λmax = 808 and 811 nm) and the NIR-II region for 2Pr (λmax = 1007) at 77 K. NIR PL enhancement largely depends on structural modification with the sulfide anions at the central position. DFT calculations indicate that the PL properties are associated with 4dπ(Pd)/3pπ(S) → 5s/5p(Ag) excitation, resulting from the existence of S-Pd(0)-S motifs in both 1 and 2. The electrochemical gaps of 1Pr, 1Bu, and 2Bu are recorded by SWV.

Effect of Ni-Doping on the Optical, Structural, and Electrochemical Properties of Ag29 Nanoclusters

Atomically precise metal nanoclusters (NCs) can be compositionally controlled at the single-atom level, but understanding structure-property correlations is required for tailoring specific optical properties. Here, the impact of Ni atom doping on the optical, structural, and electrochemical properties of atomically precise 1,3-benzene dithiol (BDT) protected Ag29 NCs is studied. The Ni-doped Ag29 (NiAg28(BDT)12) NCs, are synthesized using a co-reduction method and characterized using electrospray ionization mass spectrometry (ESI MS), ion mobility spectrometry (IMS), and X-ray photoelectron spectroscopy (XPS). Only a single Ni atom doping can be achieved despite changing the precursor concentration. Ni doping in Ag29 NCs exhibits enhanced thermal stability, and electrocatalytic oxygen evolution reaction (OER) compared to the parent NCs. Density functional theory (DFT) calculations predict the geometry and optical properties of the parent and NiAg28(BDT)12 NCs. DFT is also used to study the systematic single-atom doping effect of metals such as Au, Cu, and Pt into Ag29 NCs and suggests that with Ni and Pt, the d atomic orbitals contribute to creating superatomic orbitals, which is not seen with other dopants or the parent cluster. The emission mechanism is dominated by a charge transfer from the ligands into the Ag core cluster regardless of the dopant.

Reversible Interconversion between Ag2 and Ag6 Clusters and Their Responsive Optical Properties

The exploration of structural interconversion in clusters triggered by external stimuli has attracted significant interest due to its potential to elucidate structure-property relationships of metal clusters. In this study, two types of silver clusters, Ag2 and Ag6, are synthesized. Interestingly, the clusters exhibit reversible transformations in response to changes in the solvent conditions. The structures and optical properties of these clusters are thoroughly characterized using techniques such as mass spectrometry, single-crystal X-ray diffraction, photoluminescence, and radioluminescence spectroscopy. While both Ag2 and Ag6 display excellent photoluminescence properties, Ag2 demonstrates superior performance in X-ray radioluminescence compared to Ag6. Flexible scintillator films fabricated from Ag2 clusters exhibit outstanding X-ray imaging capabilities, achieving a spatial resolution of 15.0 lp/mm and an impressive detection limit for an X-ray dose of 0.58 μGy s-1. This detection limit is nearly 10 times lower than the typical dose rate used in X-ray diagnostics (5.5 μGy s-1). This work introduces a novel approach for designing thiol-free silver clusters capable of solvent-dependent reversible interconversion, offering new insights into the development of silver clusters for advanced X-ray imaging applications.

Chemical Flexibility of Atomically Precise Metal Clusters

Ligand-protected metal clusters possess hybrid properties that seamlessly combine an inorganic core with an organic ligand shell, imparting them exceptional chemical flexibility and unlocking remarkable application potential in diverse fields. Leveraging chemical flexibility to expand the library of available materials and stimulate the development of new functionalities is becoming an increasingly pressing requirement. This Review focuses on the origin of chemical flexibility from the structural analysis, including intra-cluster bonding, inter-cluster interactions, cluster-environments interactions, metal-to-ligand ratios, and thermodynamic effects. In the introduction, we briefly outline the development of metal clusters and explain the differences and commonalities of M(I)/M(I/0) coinage metal clusters. Additionally, we distinguish the bonding characteristics of metal atoms in the inorganic core, which give rise to their distinct chemical flexibility. Section 2 delves into the structural analysis, bonding categories, and thermodynamic theories related to metal clusters. In the following sections 3 to 7, we primarily elucidate the mechanisms that trigger chemical flexibility, the dynamic processes in transformation, the resultant alterations in structure, and the ensuing modifications in physical-chemical properties. Section 8 presents the notable applications that have emerged from utilizing metal clusters and their assemblies. Finally, in section 9, we discuss future challenges and opportunities within this area.

Highly intense NIR emissive Cu4Pt2 bimetallic clusters featuring Pt(i)-Cu4-Pt(i) sandwich kernel

Metal nanoclusters (NCs) capable of near-infrared (NIR) photoluminescence (PL) are gaining increasing interest for their potential applications in bioimaging, cell labelling, and phototherapy. However, the limited quantum yield (QY) of NIR emission in metal NCs, especially those emitting beyond 800 nm, hinders their widespread applications. Herein, we present a bright NIR luminescence (PLQY up to 36.7%, ∼830 nm) bimetallic Cu4Pt2 NC, [Cu4Pt2(MeO-C6H5-C[triple bond, length as m-dash]C)4(dppy)4]2+ (dppy = diphenyl-2-pyridylphosphine), with a high yield (up to 67%). Furthermore, by modifying the electronic effects of R in RC[triple bond, length as m-dash]C- (R = MeO-C6H5, F-C6H5, CF3-C6H5, Nap, and Biph), we can effectively modulate phosphorescence properties, including the PLQY, emission wavelength, and excited state decay lifetime. Experimental and computational studies both demonstrate that in addition to the electron effects of substituents, ligand modification enhances luminescence intensity by suppressing non-radiation transitions through intramolecular interactions. Simultaneously, it allows the adjustment of emitting wavelengths by tuning the energy gaps and first excited triplet states through intermolecular interactions of ligand substituents. This study provides a foundation for rational design of the atomic-structures of alloy metal NCs to enhance their PLQY and tailor the PL wavelength of NIR emission.

Triplet-triplet annihilation-based photon upconversion using nanoparticles and nanoclusters

The phenomenon of photon upconversion (UC), generating high-energy photons from low-energy photons, has attracted significant attention. In particular, triplet-triplet annihilation-based UC (TTA-UC) has been achieved by combining the excitation states of two types of molecules, called the sensitizer and emitter (or annihilator). With TTA-UC, it is possible to convert weak, incoherent near-infrared (NIR) light, which constitutes half of the solar radiation intensity, into ultraviolet and visible light that are suitable for the operation of light-responsive functional materials or devices such as solar cells and photocatalysts. Research on TTA-UC is being conducted worldwide, often employing materials with high intersystem crossing rates, such as metal porphyrins, as sensitizers. This review summarizes recent research and trends in triplet energy transfer and TTA-UC for semiconductor nanoparticles or nanocrystals with diameters in the nanometer range, also known as quantum dots, and for ligand-protected metal nanoclusters, which have even smaller well-defined sub-nanostructures. Concerning nanoparticles, transmitter ligands have been applied on the surface of the nanoparticles to efficiently transfer triplet excitons formed inside the nanoparticles to emitters. Applications are expanding to solid-state UC devices that convert NIR light to visible light. Additionally, there is active research in the development of sensitizers using more cost-effective and environmentally friendly elements. Regarding metal nanoclusters, methods have been established for the evaluation of excited states, deepening the understanding of luminescent properties and excited relaxation processes.

Al8 Cluster-Based Metal Halide Frameworks: Balancing Singlet-Triplet Excited States to Achieve White Light and Multicolor Luminescence

Luminescent metal clusters have attracted great interest in current research; however, the design synthesis of Al clusters with color-tunable luminescence remains challenging. Herein, an [Al8 (OH)8 (NA)16 ] (Al8 , HNA = nicotinic acid) molecular cluster with dual luminescence properties of fluorescence and room-temperature phosphorescence (RTP) is synthesized by choosing HNA ligand as phosphor. Its prompt photoluminescence (PL) spectrum exhibits approximately white light emission at room temperature. Considering that halogen atoms can be used to regulate the RTP property by balancing the singlet and triplet excitons, different CdX2 (X- = Cl- , Br- , I- ) are introduced into the reactive system of the Al8 cluster, and three new Al8 cluster-based metal-organic frameworks, {[Al8 Cd3 Cl5 (OH)8 (NA)17 H2 O]·2HNA}n (CdCl2 -Al8 ), {[Al8 Cd4 Br7 (OH)8 (NA)16 CH3 CN]·NA·HNA}n (CdBr2 -Al8 ) and {[Al8 Cd8 I16 (OH)8 (NA)16 ]}n (CdI2 -Al8 ) are successfully obtained. They realize the color tunability from blue to yellow at room temperature. The origination of fluorescence and phosphorescence has also been illustrated by structure-property analysis and theoretical calculation. This work provides new insights into the design of multicolor luminescent metal cluster-based materials and develops advanced photo-functional materials for multicolor display, anti-counterfeiting, and encryption applications.

The Pivotal Radical Intermediate [Au21(SR)15]+ in the Ligand-Exchange-Induced Size-Reduction of [Au23(SR)16]- to Au16(SR)12

The atomic precision of sub-nanometer-sized metal nanoclusters makes it possible to elucidate the kinetics of metal nanomaterials from the molecular level. Herein, the size reduction of an atomically precise [Au23(CHT)16]- (HCHT = cyclohexanethiol) cluster upon ligand exchange with HSAdm (1-adamantanethiol) has been reported. During the 16 h conversion of [Au23(CHT)16]- to Au16(SR)12, the neutral 6e Au21(SR)15, and its 1e-reduction state, i.e. the 5e, cationic radical, [Au21(SR)15]+, are active intermediates to account for the formation of thermodynamically stable Au16 products. The combination of spectroscopic monitoring (with UV-vis and ESI-MS) and DFT calculations indicates the preferential size-reduction on the corner Au atoms on the core surface and the terminal Au atoms on longer AunSn+1 staples. This study provides a reassessment on the electronic state of the Au21 structure and highlights the single electron transfer processes in cluster systems and thus the importance of the EPR analysis on the mechanistic issues.

Triplet properties and intersystem crossing mechanism of PtAg28 nanocluster sensitizers achieving low threshold and efficient photon upconversion

Ligand-protected metal nanoclusters have emerged as a promising platform for providing sensitizers for triplet-triplet annihilation upconversion (TTA-UC). Herein, we report [PtAg28(BDT)12]4- (PtAg28; BDT = 1,3-benzenedithiolate) as a sensitizer enabling TTA-UC at low excitation intensities. PtAg28 exhibits a long-lived triplet state (approximately 7 μs) generated with a 100% intersystem crossing (ISC) quantum yield. The mechanism driving this efficient ISC was unveiled with the aid of theoretical calculations. Specifically, the S1-T1 ISC reveals a small spin-orbit coupling (SOC) matrix element, attributed to their similar electron configuration. In contrast, the T2 state, which is energetically close to S1, features a hole distribution derived from the Py superatomic orbital of the icosahedral Pt@Ag12 core. This distribution enables direct SOC based on the orbital angular momentum change from the S1 state with a Pz-derived hole distribution. Consequently, the efficient ISC was rationalized by the S1 → T2 → T1 pathway. The T1 state possesses a metal core-to-surface metal charge transfer character, facilitating triplet energy transfer and conferring superior sensitization ability. Leveraging these characteristics, the combination of PtAg28 sensitizer with a 9,10-diphenylanthracene annihilator/emitter attained an extremely low UC threshold of 0.81 mW cm-2 at 532 nm excitation, along with efficient green-to-blue TTA-UC with an internal quantum yield (ΦUCg) of 12.2% (50% maximum). This results in a pseudo-first-order TTA process with strong UC emission under 1-sun conditions.

Tailoring Vacancy Defects in Isolated Atomically Precise Silver Clusters through Mercury-Doped Intermediates

Vacancy defects are known to have significant effects on the physical and chemical properties of nanomaterials. However, the formation and structural dynamics of vacancy defects in atomically precise coinage metal clusters have hardly been explored due to the challenges associated with isolation of such defected clusters. Herein, we isolate [Ag28(BDT)12]2- (BDT is 1,3-benzenedithiol), a cluster with a "missing atom" site compared to [Ag29(BDT)12]3-, whose precise structure is known from X-ray diffraction. [Ag28(BDT)12]2- was formed in the gas-phase by collisional heating of [Ag28Hg(BDT)12]2-, a Hg-doped analogue of the parent cluster. The structural changes resulting from the loss of the Hg heteroatom were investigated by trapped ion mobility mass spectrometry. Density functional theory calculations were performed to provide further insights into the defect structures, and molecular dynamics simulations revealed defect site-dependent structural relaxation processes.

One-step preparation of Pt/Ag nanoclusters for CO2 transformation

Structurally precise metal nanoclusters with a facile synthetic process and high catalytic performance have been long pursued. These atomically precise nanocatalysts are regarded as model systems to study structure-performance relationships, surface coordination chemistry, and the reaction mechanism of heterogeneous metal catalysts. Nevertheless, the research on silver-based nanoclusters for driving chemical transformations is sluggish in comparison to gold counterparts. Herein, we report the one-step synthesis of Pt/Ag alloy nanoclusters of [PtAg9(C18H12Br3P)7Cl3](C18H12Br3P), which are highly active in catalysing cycloaddition reactions of CO2 and epoxides. The cluster was obtained in a rather simple way with the reduction of silver and platinum salts in the presence of ligands in one pot. The molecular structure of the titled cluster describes the protection of the Pt-centred Ag9 crown by the shell of phosphine ligands and halides. Its electronic structure, as revealed by density function theoretical calculations, adopts a superatomic geometry with 1S21P6 configuration. Interestingly, the cluster displays high activity in the formation of cyclic carbonates from CO2 under mind conditions.

Recent developments in the investigation of driving forces for transforming coinage metal nanoclusters

Metal nanoclusters serve as an emerging class of modular nanomaterials. The transformation of metal nanoclusters has been fully reflected in their studies from every aspect, including the structural evolution analysis, physicochemical property regulation, and practical application promotion. In this review, we highlight the driving forces for transforming atomically precise metal nanoclusters and summarize the related transforming principles and fundamentals. Several driving forces for transforming nanoclusters are meticulously reviewed herein: ligand-exchange-induced transformations, metal-exchange-induced transformations, intercluster reactions, photochemical transformations, oxidation/reduction-induced transformations, and other factors (intrinsic instability, pH, temperature, and metal salts) triggering transformations. The exploitation of transforming principles to customize the preparations, structures, physicochemical properties, and practical applications of metal nanoclusters is also disclosed. At the end of this review, we provide our perspectives and highlight the challenges remaining for future research on the transformation of metal nanoclusters. Our intended audience is the broader scientific community interested in metal nanoclusters, and we believe that this review will provide researchers with a comprehensive synthetic toolbox and insights on the research fundamentals needed to realize more cluster-based nanomaterials with customized compositions, structures, and properties.

Alloying and dealloying of Au18Cu32 nanoclusters at precise locations via controlling the electronegativity of substituent groups on thiol ligands

The doping site of metals in an alloy nanocluster plays a key role in determining the cluster properties. Herein, we found that alloying engineering was achieved by replacing Cu at specific positions in the second layer Cu₂₀ shell of the [Au18Cu32(SR-O)36]2- or [Au18Cu32(SR-F)36]3- (SR-O = -S-PhOMe; SR-F = -SC₆H₃^3,4F₂) nanocluster with Au to generate a core-shell [Au20.31Cu29.69(SR-O)36]2- protected by mercaptan ligands with electron-donating substituents, which could be stable obtained compared with the alloyed nanocluster with electron-withdrawing substituent ligands. Moreover, dealloying engineering was accomplished by an electron-withdrawing substituent ligand exchange strategy (i.e., [Au18Cu32(SR-F)36]2-). The abovementioned reaction was analyzed using single-crystal X-ray crystallography, electrospray ionization mass spectrometry, and X-ray photoelectron spectroscopy and monitored via time-dependent ultraviolet-visible absorption spectroscopy. This reversible and precise location of alloying and dealloying provides the possibility for studying the relationship between the structure and properties of nanoclusters at the atomic level.

Platonic and Archimedean solids in discrete metal-containing clusters

Metal-containing clusters have attracted increasing attention over the past 2-3 decades. This intense interest can be attributed to the fact that these discrete metal aggregates, whose atomically precise structures are resolved by single-crystal X-ray diffraction (SCXRD), often possess intriguing geometrical features (high symmetry, aesthetically pleasing shapes and architectures) and fascinating physical properties, providing invaluable opportunities for the intersection of different disciplines including chemistry, physics, mathematical geometry and materials science. In this review, we attempt to reinterpret and connect these fascinating clusters from the perspective of Platonic and Archimedean solid characteristics, focusing on highly symmetrical and complex metal-containing (metal = Al, Ti, V, Mo, W, U, Mn, Fe, Co, Ni, Pd, Pt, Cu, Ag, Au, lanthanoids (Ln), and actinoids) high-nuclearity clusters, including metal-oxo/hydroxide/chalcogenide clusters and metal clusters (with metal-metal binding) protected by surface organic ligands, such as thiolate, phosphine, alkynyl, carbonyl and nitrogen/oxygen donor ligands. Furthermore, we present the symmetrical beauty of metal cluster structures and the geometrical similarity of different types of clusters and provide a large number of examples to show how to accurately describe the metal clusters from the perspective of highly symmetrical polyhedra. Finally, knowledge and further insights into the design and synthesis of unknown metal clusters are put forward by summarizing these "star" molecules.

Homoleptic Silver-Rich Trimetallic M20 Nanocluster

Two silver-rich M₂₀ alloy nanoclusters (NCs), [Cu_3.5Ag_16.5{S₂P(OⁿPr)₂}₁₂] (1) and [Cu_2.5AuAg_16.5{S₂P(OⁿPr)₂}₁₂] (2), were synthesized and fully characterized by electrospray ionization mass spectrometry, NMR spectroscopy, and X-ray crystallography. Cluster 2, the first structurally characterized trimetallic M₂₀ NC, was produced by doping one Au atom into a bimetallic M₂₀ NC. Structural analyses showed the preferred positions of Group 11 metals in the yielded M₂₀ NCs. Their antioxidation ability has been investigated, and the time-dependent UV-vis spectrum shows that the presence of Cu^I atoms in structures 1 and 2 can improve the antioxidant ability.

Rapid preparation of water-soluble Ag@Au nanoclusters with bright deep-red emission

Deep-red (λ_em ∼ 710 nm) thiolated Ag@Au nanoclusters with a quantum yield of ∼18% were rapidly (∼12 min) prepared in aqueous solutions. The effects of pH and silver ions were demonstrated. The surface modification further resulted in nanoclusters with a quantum yield of ∼38%, the highest value ever reported for water-soluble red Au nanoclusters. This will highly facilitate their applications in sensing, bioimaging, etc.

Tailoring silver nanoclusters via doping: advances and opportunities

Atomically precise noble metal nanoclusters (especially Au and Ag) have been pursued due to their fascinating molecule-like properties. In spite of the significant progress on Au nanoclusters (NCs), the structure and property evolution of Ag NCs is still in high demand. Doping is a useful strategy for improving the physicochemical performances of Ag NCs. Herein we summarize the recent advances in tailoring silver NC structures and properties via doping. First, we reviewed the recent studies on the synthesis of hetero metal atom doped silver bimetallic nanoclusters, which are classified by the dopants, including Au, Pt, Pd, Cu, Ni and Cd. Second, the doping effects on their properties were reviewed, including the locations of hetero metal atoms, the influence on their stability, and the charge state evolution. Moreover, we highlighted the doping-dependent improvement of the photo-luminescence (PL) performance and catalytic activity of Ag NCs.

Light-Emitting Atomically Precise Nanocluster-Based Flexible QR Codes for Anticounterfeiting

Despite tremendous progress in the field of fluorescence-based anticounterfeiting, the advanced anticounterfeiting techniques are still posing challenges all over the world due to their cost and reliability. Recently, light-emitting atomically precise nanoclusters have emerged as attractive building blocks because of their well-defined structure, function, and stable photoluminescence. Herein, we report the room temperature fabrication of a stable, flexible, nontoxic, and low-cost precision nanocluster-based luminescent ink for the stencil printing of an optically unclonable security label. Nanocluster-based printing ink shows brilliant photoluminescence owing to its extended C-H···π/π···π interactions. Spectroscopic and microscopic investigations show that intercalated nanoclusters in the printed security labels are highly stable as their optical features and molecular compositions are unaffected. The exceptional mechanical, thermal, photo, and aqueous stabilities of the printed security labels endorse to demonstrate the printing and smartphone-based electronic reading of the quick response code on a currency. Finally, confidential information protection and decryption under a precise window of light have been achieved by adopting the optical contrast illusion. The overall cost of the security label is found to be approximately 0.013 USD per stamp.

Dynamic Metal Exchange between a Metalloid Silver Cluster and Silver(I) Thiolate

Although a homometallic (isotopic metal) exchange reaction has been reported, the in-depth understanding of the interaction between a metalloid cluster and the homometal (representing the same metal element as the metalloid cluster) thiolate is quite limited, especially at the atomic level. Herein, based on Ag₄₄(SR)₃₀ (where SR represents 4-mercaptobenzoic acid), we report a facile approach for investigating the metalloid cluster-homometal thiolate interaction at the atomic level, i.e., isotopic exchange in the Ag metalloid cluster. Since such a reaction takes no account of the enthalpy change-related heterometal (representing a different metal element) exchange, the intrinsic metalloid cluster-homometal thiolate interaction can be thoroughly investigated. Through analyzing the ESI-MS (electrospray ionization mass spectrometry) and MS/MS (mass/mass spectrometry) results of the reversible conversion between ¹⁰⁷Ag₄₄(SR)₃₀ and ¹⁰⁹Ag₄₄(SR)₃₀, we observed that all Ag atoms are exchangeable in the Ag₄₄(SR)₃₀ template. In addition, through analyzing the ESI-MS results of the interconversion between ¹⁰⁷Ag₂₉(BDT)₁₂(TPP)₄ and ¹⁰⁹Ag₂₉(BDT)₁₂(TPP)₄, we demonstrated that the metal exchange in the Ag₂₉(BDT)₁₂(TPP)₄ metalloid cluster should be a shell → kernel metal transfer process. Our results provide new insights into the metalloid cluster reactivity in the homometal thiolate environment, which will guide the future preparation of metalloid clusters with customized structures and properties.

Thiolate-Protected Bimetallic Nanoclusters: Understanding the Relationship between Electronic and Catalytic Properties

Thiolate-protected metal nanoclusters, which are smaller than 2 nm and have a specific number of metal atoms, have been greatly investigated in areas such as catalysis, sensing, and energy conversion because of their unique chemical, optical, structural, and electronic properties. Doping monometallic nanoclusters with another metal offers the opportunity to enhance these properties even further. The atomic structure of thiolate-protected bimetallic nanoclusters has been thoroughly studied using various X-ray methods, but the electronic structures of these complexes are often under-discussed. This Perspective summarizes works examining the electronic properties (charge states and energy levels) of these materials using density functional theory, square-wave voltammetry, UV-vis spectroscopy, and X-ray photoelectron spectroscopy. This information is then related to the catalytic activities of these complexes in various representative reactions (e.g., carbon-carbon coupling, hydrogenation, and oxidation). The significance of the structure-property relationship between the electronic properties and the catalytic performance of thiolate-protected bimetallic nanoclusters is demonstrated.

[AuAg26(SR)18S]- Nanocluster: Open Shell Structure and High Faradaic Efficiency in Electrochemical Reduction of CO2 to CO

For atomically precise metal nanoclusters, distinctive molecular architectures and promising applications are urgently required to be intensively explored. Herein, we have first reported the open shell structure of the [AuAg₂₆(S-Adm)₁₈S]^- nanocluster and its application in the electrochemical reduction of CO₂. The X-ray crystal structure of the AuAg₂₆ nanocluster is composed of a AuAg₁₂ icosahedron kernel and a Ag₁₄(SR)₁₈S open shell. The shell includes a Ag₆(SR)₃S, a Ag₅(SR)₆, and three Ag(SR)₃ motifs. It is the first time twisty propeller-like Ag₅(SR)₆ and trefoil-like Ag₆(SR)₃S motifs in metal nanoclusters have been observed. Due to the novel open shell configuration of Ag₁₄(SR)₁₈S, four triangular facets of the kernel are exposed. The AuAg₂₆ nanocluster shows excellent catalytic activity in the electrochemical reduction of CO₂ to CO. The Faradaic efficiency of CO is up to 98.4% under -0.97 V. The electrochemical in situ infrared study and DFT calculations demonstrate that the open shell structure of the AuAg₂₆ nanocluster is beneficial to the forming of intermediate COOH* in the electrochemical reduction of CO₂ to CO.

New Routes for Multicomponent Atomically Precise Metal Nanoclusters

Atomically precise metal nanoclusters (NCs), protected by a monolayer of ligands, are regarded as potential building blocks for advanced technologies. They are considered as intermediates between the atomic/molecular regime and the bulk. Incorporation of foreign metals in NCs enhances several of their properties such as catalytic activity, luminescence, and so on; hence, it is of high importance for tuning their properties and broadening the scope of applications. In most of the cases, enhancement in specific properties was observed upon alloying due to the synergistic effect. In the past several years, many alloy clusters have been synthesized, which show a tremendous change in the properties than their monometallic analogs. However, controlling the synthesis and tuning the structures of alloy NCs with atomic precision are major challenges. Various synthetic methodologies have been developed so far for the controlled synthesis of alloy NCs. In this perspective, we have highlighted those diverse synthetic routes to prepare alloys, which include co-reduction, galvanic reduction, antigalvanic reduction, metal deposition, ligand exchange, intercluster reaction, and reaction of NCs with bulk metals. Advancement in synthetic procedures will help in the preparation of alloy NCs with the desired structure and composition. Future perceptions concerning the progress of alloy nanocluster science are also provided.

Surface engineering of linearly fused Au13 units using diphosphine and Cd doping

Herein, surface engineering was delicately performed to assemble two new Au-Cd alloy nanoclusters, including [Cd2Au17(S-c-C6H11)12(DPPP)2](BPh4) and Cd2Au29(TBBT)17(DPPF)2. Both the Au13 (in Cd2Au17) and Au25 (in Cd2Au29) cores were covered by two identical Au2Cd(SR)6 motifs and two diphosphine ligands. In addition, their optical properties were explored to give clues on the kernel- and surface-dependent electronic structures.

Structural determination of a metastable Ag27 nanocluster and its transformations into Ag8 and Ag29 nanoclusters

The atomically precise structure of a metastable nanocluster, Ag27H11(SPhMe2)12(DPPM)6, was determined, and its transformations into size-reduction Ag8 and size-growth Ag29 nanoclusters have been mapped out.

Atomically precise alloy nanoclusters: syntheses, structures, and properties

Metal nanoclusters fill the gap between discrete atoms and plasmonic nanoparticles, providing unique opportunities for investigating the quantum effects and precise structure-property correlations at the atomic level. As a versatile strategy, alloying can largely improve the physicochemical performances compared to the corresponding homo-metal nanoclusters, and thus benefit the applications of such nanomaterials. In this review, we highlight the achievements of atomically precise alloy nanoclusters, and summarize the alloying principles and fundamentals, including the synthetic methods, site-preferences for different heteroatoms in the templates, and alloying-induced structure and property changes. First, based on various Au or Ag nanocluster templates, heteroatom doping modes are presented. The templates with electronic shell-closing configurations tend to maintain their structures during doping, while the others may undergo transformation and give rise to alloy nanoclusters with new structures. Second, alloy nanoclusters of specific magic sizes are reviewed. The arrangement of different atoms is related to the symmetry of the structures; that is, different atoms are symmetrically located in the nanoclusters of smaller sizes, and evolve into shell-by-shell structures at larger sizes. Then, we elaborate on the alloying effects in terms of optical, electrochemical, electroluminescent, magnetic and chiral properties, as well as the stability and reactivity via comparisons between the doped nanoclusters and their homo-metal counterparts. For example, central heteroatom-induced photoluminescence enhancement is emphasized. The applications of alloy nanoclusters in catalysis, chemical sensing, bio-labeling, and other fields are further discussed. Finally, we provide perspectives on existing issues and future efforts. Overall, this review provides a comprehensive synthetic toolbox and controllable doping modes so as to achieve more alloy nanoclusters with customized compositions, structures, and properties for applications. This review is based on publications available up to February 2020.

Effect of subtle changes of isomeric ligands on the synthesis of atomically precise water-soluble gold nanoclusters

The subtle structural change of hydrophilic ligands on the size control of metal nanoclusters (NCs) is unclear but critically important for fundamental understanding. Herein, we report our findings that subtle changes of isomeric ligands lead to a dramatic difference in the size of water-soluble Au NCs. By using isomeric para-mercaptobenzoic acid (p-MBA), m-MBA, and o-MBA as model ligands, it was found that both the steric hindrance and the electronic effect of isomeric ligands significantly influences the size of Au NCs, resulting in the formation of different sized Au44(p-MBA)26 NCs, Au25(m-MBA)18 NCs, and Au37/43(o-MBA)22/26 NCs. Besides this, by collocating any two of the isomeric MBAs as ligand pairs to compare their protecting capability for Au NCs, the protecting abilities of such ligands were found to follow the trend: m-MBA > o-MBA > p-MBA. In addition, the growth process of Au44(p-/o-MBA)26 NCs from Au(i)-MBA complexes in the NaBH4 reduction system was also monitored by real-time UV-vis absorption spectroscopy and ESI mass spectrometry, which complies with the 2e- hopping growth principle, indicating the universal applicability of this principle in the synthesis of thiolated metal NCs. This study provides a fundamental understanding of the effect of ligands' steric hindrance and electronic factors on the size control of water-soluble metal NCs and sheds light on the formation of metal NCs in the NaBH4 reduction system.

A new silver cluster that emits bright-blue phosphorescence

A new stable hexanuclear silver(i) cluster features brightly blue phosphorescence at room temperature, which is integrated with yellow phosphors (YAG:Ce³⁺) to white-light-emission film and demonstrates interesting mechanoresponsive luminescence.

An overview on the current understanding of the photophysical properties of metal nanoclusters and their potential applications

Photophysics of atomically precise metal nanoclusters (MNCs) is an emerging area of research due to their potential applications in optoelectronics, photovoltaics, sensing, bio-imaging and catalysis. An overview of the recent advances in the photophysical properties of MNCs is presented in this review. To begin with, we illustrate general synthesis methodologies of MNCs using direct reduction, chemical etching, ligand exchange, metal exchange and intercluster reaction. Due to strong quantum confinement, the NCs possess unique electronic properties such as discrete optical absorption, intense photoluminescence (PL), molecular-like electron dynamics and non-linear optical behavior. Discussions have also been carried out to unveil the influence of the core size, nature of ligands, heteroatom doping, and surrounding environments on the optical absorption and photophysical properties of metal clusters. Recent findings reveal that the excited-state dynamics, nonlinear optical properties and aggregation induced emission of metal clusters offer exciting opportunities for potential applications. We discuss briefly about their versatile applications in optoelectronics, sensing, catalysis and bio-imaging. Finally, the future perspective of this research field is given.

Free Valence Electron Centralization Strategy for Preparing Ultrastable Nanoclusters and Their Catalytic Application

Metal nanoclusters have attracted extensive interests owing to their atomically precise structures as well as intriguing properties. However, silver nanoclusters are not as stable as their gold counterparts, impeding the practical applications of Ag nanoclusters. In this work, a strategy of free valence electron centralization was exploited to render parent Ag nanoclusters highly stable. The stability of Ag₂₉(SSR)₁₂(PPh₃)₄ (SSR: benzene-1,3-dithiol) was controllably enhanced by stepwisely alloying the Ag₂₉ nanocluster to Ag₁₇Cu₁₂(SSR)₁₂(PPh₃)₄ and Au₁Ag₁₆Cu₁₂(SSR)₁₂(PPh₃)₄. Specifically, the trimetallic Au₁Ag₁₆Cu₁₂ is ultrastable even at 175 °C, which is close to the nanocluster decomposition temperature. The structures of Ag₁₇Cu₁₂ and Au₁Ag₁₆Cu₁₂ nanoclusters are determined by single-crystal X-ray diffraction. Furthermore, a combination of X-ray photoelectron spectroscopy measurements and density functional theory calculations demonstrates that the enhanced stability is induced by the centralization of the free valence electrons to the interior of the nanocluster. More importantly, the Au₁Ag₁₆Cu₁₂ enables the multicomponent A³ coupling reaction at high temperatures, which remarkably shortens the catalytic reaction time from ∼5 h to 3 min. Overall, this work presents a strategy for enhancing the thermal stability of nanoclusters via centralizing the free valence electrons to the nanocluster kernels.

Tailoring the photoluminescence of atomically precise nanoclusters

Due to their atomically precise structures and intriguing chemical/physical properties, metal nanoclusters are an emerging class of modular nanomaterials. Photo-luminescence (PL) is one of their most fascinating properties, due to the plethora of promising PL-based applications, such as chemical sensing, bio-imaging, cell labeling, phototherapy, drug delivery, and so on. However, the PL of most current nanoclusters is still unsatisfactory-the PL quantum yield (QY) is relatively low (generally lower than 20%), the emission lifetimes are generally in the nanosecond range, and the emitted color is always red (emission wavelengths of above 630 nm). To address these shortcomings, several strategies have been adopted, and are reviewed herein: capped-ligand engineering, metallic kernel alloying, aggregation-induced emission, self-assembly of nanocluster building blocks into cluster-based networks, and adjustments on external environment factors. We further review promising applications of these fluorescent nanoclusters, with particular focus on their potential to impact the fields of chemical sensing, bio-imaging, and bio-labeling. Finally, scope for improvements and future perspectives of these novel nanomaterials are highlighted as well. Our intended audience is the broader scientific community interested in the fluorescence of metal nanoclusters, and our review hopefully opens up new horizons for these scientists to manipulate PL properties of nanoclusters. This review is based on publications available up to December 2018.

Single Au Atom Doping of Silver Nanoclusters

Ag₂₉ nanoclusters capped with lipoic acid (LA) can be doped with Au. The doped clusters show enhanced stability and increased luminescence efficiency. We attribute the higher quantum yield to an increase in the rate of radiative decay. With mass spectrometry, the Au-doped clusters were found to consist predominantly of Au₁Ag₂₈(LA)₁₂^3-. The clusters were characterized using X-ray absorption spectroscopy at the Au L₃-edge. Both the extended absorption fine structure (EXAFS) and the near edge structure (XANES) in combination with electronic structure calculations confirm that the Au dopant is preferentially located in the center of the cluster. A useful XANES spectrum can be recorded for lower concentrations, or in shorter time, than the more commonly used EXAFS. This makes XANES a valuable tool for structural characterization.

Atomic-Level Doping of Metal Clusters

Atomically precise noble metal (mainly silver and gold) nanoclusters are an emerging category of promising functional materials for future applications in energy, sensing, catalysis, and nanoelectronics. These nanoclusters are protected by ligands such as thiols, phosphines, and hydride and have sizes between those of atoms and plasmonic nanoparticles. In metallurgy, the properties of a pure metal are modified by the addition of other metals, which often offers augmented characteristics, making them more utilizable for real-life applications. In this Account, we discuss how the incorporation of various metal atoms into existing protected nanoclusters tunes their structure and properties. The process of incorporating metals into an existing cluster is known as doping; the product is known as a doped cluster, and the incorporated metal atom is called a dopant/foreign atom. We first present a brief historical overview of protected clusters and the need for doping and explain (with examples) the difference between an "alloy" and a "doped" cluster, which are two frequently confused terms. We then discuss several commonly observed challenges in the synthesis of doped clusters: (i) doping produces a mixture of compositions that prevents the growth of single crystals; (ii) doping with foreign atoms sometimes changes the overall composition and structure of the parent cluster; and (iii) doping beyond a certain number of foreign atoms decomposes the doped cluster. After delineating the challenges, we review a few potential synthetic methods for doped clusters: (i) the co-reduction method, (ii) the galvanic exchange method, (iii) ligand-induced conversion of bimetallic clusters to doped clusters, and (iv) intercluster reactions. As a foreign atom is able to occupy different positions within the structure of the parent cluster, we examine the structural relationship between the parent clusters and their different foreign-atom-doped clusters. We then show how doping enhances the stability, luminescence, and catalytic properties of clusters. The enhancement factor highly depends on the number and nature of the foreign atoms, which can also alter the charge state of the parent cluster. Atomic-level doping of foreign atoms in the parent cluster is confirmed by high-resolution electrospray ionization and matrix-assisted laser desorption ionization mass spectrometry techniques and single-crystal X-ray diffraction methods. The photophysical properties of the doped clusters are investigated using both time-dependent and steady-state luminescence and optical absorption spectroscopies. After presenting an overview of atomic-level doping in metal clusters and demonstrating its importance for enriching the chemistry and photophysics of clusters and extending their applications, we conclude this Account with a brief perspective on the field's future.

A thirty-fold photoluminescence enhancement induced by secondary ligands in monolayer protected silver clusters

In this paper, we demonstrate that systematic replacement of the secondary ligand PPh3 leads to an enhancement in the near-infrared (NIR) photoluminescence (PL) of [Ag29(BDT)12(PPh3)4]3-. While the replacement of PPh3 with other monophosphines enhances luminescence slightly, the replacement with diphosphines of increasing chain length leads to a drastic PL enhancement, as high as 30 times compared to the parent cluster, [Ag29(BDT)12(PPh3)4]3-. Computational modeling suggests that the emission is a ligand to metal charge transfer (LMCT) which is affected by the nature of the secondary ligand. Control experiments with systematic replacement of the secondary ligand confirm its influence on the emission. The excited state dynamics shows this emission to be phosphorescent in nature which arises from the triplet excited state. This enhanced luminescence has been used to develop a prototypical O2 sensor. Moreover, a similar enhancement was also found for [Ag51(BDT)19(PPh3)3]3-. The work presents an easy approach to the PL enhancement of Ag clusters for various applications.

Single-ligand exchange on an Au-Cu bimetal nanocluster and mechanism

An Au-Cu bimetallic nanocluster co-capped by selenolate and phosphine is obtained and its X-ray structure shows an icosahedral Au13 kernel surrounded by three CuSe2PPh2Py motifs and one CuSe3 motif, formulated as [Au13Cu4(PPh2Py)3(SePh)9]. Interestingly, a single-ligand exchange process is observed in the growth reaction, in which an [Au13Cu4(PPh2Py)4(SePh)8]+ intermediate is first formed, but a prolonged reaction leads to one PPh2Py ligand being selectively replaced by a PhSe-ligand. DFT simulations reveal that both steric hindrance and bond dissociation energy have great effects on the single-ligand exchange reaction as well as the thermodynamics, which help to understand the mechanism of the ligand exchange. Temperature-dependent UV-vis absorption and photoluminescence (PL) properties of the Au-Cu nanocluster imply that the optical properties are mainly contributed by the metal core. Femtosecond time-resolved pump-probe analysis maps out further details of the PL process.

Au25(SR)18: the captain of the great nanocluster ship

Noble metal nanoclusters are in the intermediate state between discrete atoms and plasmonic nanoparticles and are of significance due to their atomically accurate structures, intriguing properties, and great potential for applications in various fields. In addition, the size-dependent properties of nanoclusters construct a platform for thoroughly researching the structure (composition)-property correlations, which is favorable for obtaining novel nanomaterials with enhanced physicochemical properties. Thus far, more than 100 species of nanoclusters (mono-metallic Au or Ag nanoclusters, and bi- or tri-metallic alloy nanoclusters) with crystal structures have been reported. Among these nanoclusters, Au25(SR)18-the brightest molecular star in the nanocluster field-is capable of revealing the past developments and prospecting the future of the nanoclusters. Since being successfully synthesized (in 1998, with a 20-year history) and structurally determined (in 2008, with a 10-year history), Au25(SR)18 has stimulated the interest of chemists as well as material scientists, due to the early discovery, easy preparation, high stability, and easy functionalization and application of this molecular star. In this review, the preparation methods, crystal structures, physicochemical properties, and practical applications of Au25(SR)18 are summarized. The properties of Au25(SR)18 range from optics and chirality to magnetism and electrochemistry, and the property-oriented applications include catalysis, chemical imaging, sensing, biological labeling, biomedicine and beyond. Furthermore, the research progress on the Ag-based M25(SR)18 counterpart (i.e., Ag25(SR)18) is included in this review due to its homologous composition, construction and optical absorption to its gold-counterpart Au25(SR)18. Moreover, the alloying methods, metal-exchange sites and property alternations based on the templated Au25(SR)18 are highlighted. Finally, some perspectives and challenges for the future research of the Au25(SR)18 nanocluster are proposed (also holding true for all members in the nanocluster field). This review is directed toward the broader scientific community interested in the metal nanocluster field, and hopefully opens up new horizons for scientists studying nanomaterials. This review is based on the publications available up to March 2018.

Observation of a new type of aggregation-induced emission in nanoclusters

The strategy of aggregation-induced emission (AIE) has been widely used to enhance the photo-luminescence (PL) in the nanocluster (NC) research field. Most of the previous reports on aggregation-induced enhancement of fluorescence in NCs are induced by the restriction of intramolecular motion (RIM). In this work, a novel mechanism involving the restriction of the "dissociation-aggregation pattern" of ligands is presented using a Ag29(BDT)12(TPP)4 NC (BDT: 1,3-benzenedithiol; TPP: triphenylphosphine) as a model. By the addition of TPP into an N,N-dimethylformamide solution of Ag29(BDT)12(TPP)4, the PL intensity of the Ag29(BDT)12(TPP)4 NC could be significantly enhanced (13 times, quantum yield from 0.9% to 11.7%) due to the restricted TPP dissociation-aggregation process. This novel mechanism is further validated by a low-temperature PL study. Different from the significant PL enhancement of the Ag29(BDT)12(TPP)4 NC, the non-dissociative Pt1Ag28(S-Adm)18(TPP)4 NC (S-Adm: 1-adamantanethiol) exhibits a maintained PL intensity under the same TPP-addition conditions. Overall, this work presents a new mechanism for largely enhancing the PL of NCs via modulating the dissociation of ligands on the NC surface, which is totally different from the previously reported AIE phenomena in the NC field.

Cyclic Pt3Ag33 and Pt3Au12Ag21 nanoclusters with M13 icosahedra as building-blocks

In this study, we obtained two new nanoclusters: Pt₃Ag₃₃ and Pt₃Au₁₂Ag₂₁, and explored the structure–activity relationship of their optical properties.